Clear Down payment against Vendor Invoice through Automatic Payment Program

Hi
We have to adjust vendor invoice against down payment (Advance) made through automatic payment program (F110)
Please guide us is there any configuration require to consider Down payment transactions during F110 to clear against Vendor Invoice
Ex :1. Advance payment made through special GL indicator 50K.
2. Invoice document 75K posted in vendor.
3. Now we have to clear down payment made (50K) against 75K through F110.
Regards
Sreenivasulu

Hi srinivasulu,
First u create down payment request through F-47 and define the spl gl indicator for down payment and assign the gl account for down payment gl code..
Regards,
Nivas

Similar Messages

Payment of Vendor invoices through an intermediary bank

Hello,
I am trying to figure out how to fix this problem.
I have an open invoice and I want the payment of this invoices to paid first to an account (a bank - an offshore) for example in Belgium. Thereafter the payment would be transfered to my account for example in the Netherlands, cause the bank knows that if a specific account is credited, my account in the NL should be updated with the reciept.
Should the intermediary bank account be filled in my vedor master data or not.
Did try the instructions on transaction code FIBPS with another bank, linking to a vendor, thereafter run a payment proposal, but its got mine bank details in the proposal.
How do I fix this.. That the payment will go to the offshore bank and not first to my bank accounts.
Thanks Elvis

in my understanding you just need to set at vendor's master data an Alternat.payee that must be set in SAP as vendor as well with the bank account informed.
Regards

How to create Payment against the invoices in R12 using API/Interface table

Hi Experts,
I need your help.
As per my requirement , we need to create the payments against the invoices using the payment information provided.
Earlier the Payments against the invoice is done by (3rd party system) in 11i.
But, as a part of R12 implementation,
The requirement is like now they are going to provide us and flat file(having below payment information) and we need to create the payment with these information.
COLUMNS PROVIDED
SOURCE
INVOICE INTERNAL NUMBER #
ACCOUNTING SEGMENTS
DEBIT/CREDIT
AMOUNT
CURRENCY
BANK ACCOUNT
PAYMENT DATE
DUE DATE
PAYMENT METHOD
PAYMENT TERMS
BATCH ID
We need to create an inbound interface to achieve the below requirement.
1. Create the payments in oracle R12 with the above payment information. (unable to find the way please suggest).
2. Creating the Journal entries. -> We are having GL_INTERFACE & Journal Import program to import the journals.
3. Finally we have to posting the same into GL.-- Interface & Import programs available.
Is there any api or interface tables can be used to create the payment against the invoices in r12?
Could you please help me to achive my above requirements.
Any sample code or reference will be a great help for me.
Waiting for your response.
Thanks,
Thiru.

Hi Thiru,
Perhaps these links can help:
http://ccchuanblog.blogspot.in/2010/12/oracle-ap-payment-api.html
http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/ap-invoice-payment-need-help-4037407
See "Understanding Oracle Payments APIs" here:
http://docs.oracle.com/cd/B40089_10/current/acrobat/120ibyig.pdf
If this answers your question, please mark the post. Thanks.
Kristofer Cruz
Edited by: Kristofer Cruz on Sep 5, 2012 2:41 PM

Error whilst posting a payment against an invoice ..

I'm trying to post a payment against an invoice but i'm getting an error saying
"Error -10: Base Document Card and Target Document Card do not match"
The code is shown below
// Post a payment against this invoice ..
            Payments oPay = (Payments)B1Connections.diCompany.GetBusinessObject(BoObjectTypes.oIncomingPayments);
            oPay.CardCode = form.DataSources.DBDataSources.Item("@MyFileName").GetValue("U_BPCode", 0);
            oPay.CardName = ((EditText)form.Items.Item("CardName").Specific).Value;
            oPay.Reference1 = ((EditText)form.Items.Item("DocEntry").Specific).Value;
            string workFld = ((EditText)form.Items.Item("U_Balance").Specific).Value;
            oPay.CashSum = Convert.ToDouble(workFld);
            oPay.CashAccount = "161010";
            oPay.DocType = BoRcptTypes.rCustomer;
            oPay.Invoices.DocEntry = invoice.DocNum;
            oPay.Invoices.DocLine = 0;
            oPay.Invoices.InvoiceType = BoRcptInvTypes.it_Receipt;
            oPay.Invoices.DiscountPercent = 0;
            oPay.Invoices.SumApplied = invoice.BaseAmount;
            oPay.Invoices.Add();
            int rtnCode = oPay.Add();
           Utility.handleAnError(rtnCode);
I've checked the obvious that the invoice.DocNum does relate to the business partner in oPay.CardCode ..
Anyone any ideas ? The invoice is a service invoice and I don't have any Sales Order or anything for it ..
TIA

Rob,
which ?
Robins or mine ?
EDIT: is see Robin was right
i place this in my "answered questions" book for other members
regards
David
Edited by: David Nussböck on Jun 3, 2008 3:11 PM

How to clear the down payment against the vendor invoice in the payment program?

A down payment is made $25 Later an invoice is posted for $100 Now i want to Pay $75 to Vendor But the Automatic payment program is not clearing the down payment against the vendor invoice. Could you please help how to clear the down payment against the vendor invoice in the payment program?

Swathi,
Need your help i have a strange situation
1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically
2) F-48 and document posted with document no= 15..... in company code = Us11 without payment block and the screen does not even show payment block, I had to check this from BSEG table
My question is
a) How and where does this payment block is triggered through configured and how to process next steps.
b) when I use F-48, how do we do the actual payment, is there a check printing and linking it to the KZ document or is check printing done outside the system and the KZ document type does not have any linkage.
c) If I do FB60 for a higher amount how do we pay partial amount.
Your response is appreciated.

Process/steps down payment through Automatic payment

Dear Group Members,
How to make down payment through Automatic Payment ( T code F110)
Pleas let me know the steps
Regards
shamulheq

Hi,
You can follow the steps provided by Venkat, but there is a limitation when you process down payment with F110.
Becuase based on down payment request, when you post a down payment document through F110, system will default a payment block A in the posted doument.
So, when you will post the actual invoice, system will pay that invoice in full, and will not net the down payment you already posted. Example:
Step1) Vendor Down Payment: $300
Step2) Vendor Invoice Posted: $1000
Now you expect SAP to pay the net credit balance of $700, but F110 will pay $1000 instead if you forgot to manually clear the invoice against the down payment. We used the following substitution rule to force the system to pay the net amount:
1)First create a set for all your company codes: T-code GS01 e.g. Set Name: Y_COMP_CODE, Field BUKRS
2) Transaction OBBH
Prerequisites:
BKPF-BUKRS IN Y_COMP_CODE AND
SYST-TCODE = 'F110' AND
BSEG-BSCHL = '29' AND BSEG-UMSKZ = 'A'
Substitute Field Pmnt Block with a blank
Thanks
Ron

Advance payment through automatic payment program

Hi,
Plz any one let me know how do we do advance payment to vendor through automatic payment program

Make a Down Payment Request (Advance Payment) in F-47 and then run F110.
Following configuration is needed-
In OBYR assign G/L Accounts to a Special G/L Indicator. Assign this Special G/L Indicator in FBZP then run F110. Payment run will take those Down Payment Requests and make Down Payments to the vendors.
The main purpose of Automatic payment program is to post payments to multiple vendors at a time. So it is not advisable to post down payments to multiple vendors using F110. You can post individually using F-48 and clear them using F-54
Thanks

How to do Payment against Proforma invoice with excise duty?

Hi all
I am using SAP B1 9.0
I have a scenario like, I want to make a proforma invoice partially/fully for the customer order(sales order) with excise duty and I will receive payment against this invoice.
I tried to use AR down payment request , thus I can create proforma invoice for partially/fully and I can do incoming payment also, but the problem is I can't use Excise duty(CENVAT) in down payment document. Is there a way or work around for my issue?
Thanks in advance.
Pravin

Hi,
In standard SAP B1, we can't select Excise tax code in Down payment request document and it will not allow also
Find below the workaround solution:
1. When you are raising Down payment request, enter DPM value including Excise Duty. i.e. If the base value is 1000 and Excise duty 120, enter 1120 in DPM value, the percentage will become 112%. In case of partial also calculate partial excise duty and add in base value and enter in DPM value.
2. Based on Down payment request book the incoming payment
3. Adjust Down payment request in final AR Invoice it will get adjusted in total value.
Note: The Excise duties will book at the time of OEI booking (as per legal req). We can't book the excise at the time of Down payment.
Regards,
Kiran

Vendor Invoice through FB60

Hi Experts,
I have very urgent requirement to Post Vendor Invoice Through
FB60.
Please suggest me BAPI for this ans suggest code to use that.

hi,
check this link.
http://www.geocities.com/rmtiwari/main.html?http://www.geocities.com/rmtiwari/Resources/MySolutions/Dev/Codes/Report/Z_BAPI_INCOMINGINVOICE_CREATE.html

Payment not clearing for Vendor through Automatic Payment Program

Hi
I had setup automatic payment program for my vendor to take $ from my GL account. When I run the payment program, it ran without any error, however, the vendor account was not cleared. The balance in GL and Vendor account remains the original amounts.
The log shows the following.
Job started
Step 001 started ( program SAPF110S, variant &0000000001081, user ID XXXXXXX)
Log for payment run for payment on 01/12/2008, identification XXXX
End of log
Job finished
Can anyone help ?
Thanks
Shalini

I have not proposed a solution. Now go to F110 and go to the table additional tab and press proposal log button on the lower right hand side. this will give a detailed log. Either analyse this error set right error or send the error log for analysis.
First run the proposal run and if it is successful, run the payment run and then to print run.
It should be run in the above sequence.
Edited by: Sivakumar Gopalakrishnan on Jan 12, 2008 7:54 PM

How to clear vendor open items if vendor invoice currency and payment currency different

Hi All.
How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD but local currency is INR
while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
I checked all configuration, configuration wise no problem
BR.
Chandra

Hi Chandra,
You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
Invoice is in USD - 1000 & INR - 60000
Payment is in INR - 60000
Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
Vendor A/c Dr 60000 (invoice)
Vendor A/c Cr 60000 (Payment)
Gain from exchange rate A/c Cr 100 (60000 - 60100)
Small diff.write off A/c (or) Dummy A/c Dr 100
After done the above posting, we have to pass below manual JV in FB01
Gain from exchange rate A/c Dr 100
Small diff.write off A/c (or) Dummy A/c Cr 100
Regards,
Mukthar

Automatic payment against vendor

Hello all,
One of our clients posted a certain amount in a G/L account (in credit).
And now she wants to do an automatic payment against a vendor.
Is it possible?
If yes, can you explain to me how to procede?
Thanks for help in advance,
Soumaya
Edited by: Soumaya ABIDI on Jul 27, 2011 11:46 AM

Hi:
I guess automatic payment would not be possible here, however you can charge off the credit balance of GL in F-03 t code to the vendor you want by selecting credit entries posted in GL. F-03 will pick the GL only if the account was managed on Open item basis. Hope this will help you.
Regards

Urgent : Auto Clear Down Pyament with Vendor IV and Customer Billing

Dear friends,
I have problem about how to set the vendor invoice clear with down payment agianst PO automatically. BTW, customer billing how could be cleared automatically with down payment please give me suggesstion.
Thank for all of your help.

Dear Padma,
Thanks for your reply.
Caus my unclear statement make you confuse. Let me explain clearly.
I have two scenario:
1.One is customer down payment which should be cleaed wiht later billing,
2.The other scenario is vendor down payment also have to be cleared with later IV.
What my problem is, is that possible to make both clear transaction automatically generated after billing or IV ?
Or any suggestion processes should bo done to get the information of which items should be cleared.
Thank you very much!
Muriel

Clearing between customer and vendor invoice with F110 transaction

Hello,
I have an issue related to the functionalities of the transaction F110.
I'd like to clear the vendor invoice with the custome invoice.
Customer and vendor records are linked properly and the flag 'Clrg with Cust.' is set on vendor and 'Clearing with Vendor' is set on customer.
Both the invoice are in USD and the amount in document currency of the vendor invoice is > of the amount in document currency of the customer invoice.
I entered in both the invoice the same payment method (outgoing payment method).
The error that I can see in the proposal log is related to the customer invoice and is:
Payment method selection for items due now to the amount of USD 500,00
Due items with currency USD, pmnt method - items total is > 0
..none of the payment methods defined can be used for these items
information re. vendor xxxxxxxx / customer yyyyyyy / paying company code TS01 ...
.. payment not possible because of reported error
According to the log of the proposal the vendor invoice can be paid.
If I click on display proposal and double click on the customer invoice (with red light) I can read the note:
No pymt possible because items with a debit
Following the settings of the payment method used:
Payment method in the country
- Payment method for outgoing payment selected
- Bank transf. selected
- allowed for personal payment flagged
- Bank details flagged
- Document type for payment XX
- clearing document type XX
- Use classic payment medium program selected
Currency allowed: This table is empty (will mean that all currencies are permitted)
Payment method in company code
Minimum amount: 0,01
Maximum amount: 9.999.999.999,99
Distribution amnt: 0,00
Single paymentfor marked item selected
Foreign business partner allowed selected
foreign currency allowed selected
Cust/vend bank abroad allowed? selected
Bank selection control "No optimization" selected
Can you please help me to understand the error?
I'm afraid it is a problem with the bank but I don't understand why the payment of the vendor invoice is allowed and the customer invoice not.
Thank you very much in advance
Kind R

Hello,
I have an issue related to the functionalities of the transaction F110.
I'd like to clear the vendor invoice with the custome invoice.
Customer and vendor records are linked properly and the flag 'Clrg with Cust.' is set on vendor and 'Clearing with Vendor' is set on customer.
Both the invoice are in USD and the amount in document currency of the vendor invoice is > of the amount in document currency of the customer invoice.
I entered in both the invoices the same payment method (outgoing payment method).
The error that I can see in the proposal log is related to the customer invoice and is:
Payment method selection for items due now to the amount of USD 500,00
Due items with currency USD, pmnt method - items total is > 0
..none of the payment methods defined can be used for these items
information re. vendor xxxxxxxx / customer yyyyyyy / paying company code TS01 ...
.. payment not possible because of reported error
According to the log of the proposal the vendor invoice can be paid.
If I click on display proposal and double click on the customer invoice (with red light) I can read the note:
No pymt possible because items with a debit bal.still exist; see job log
Following the settings of the payment method used:
Payment method in the country
- Payment method for outgoing payment selected
- Bank transf. selected
- allowed for personal payment flagged
- Bank details flagged
- Document type for payment XX
- clearing document type XX
- Use classic payment medium program selected
Currency allowed: This table is empty (will mean that all currencies are permitted)
Payment method in company codeMinimum amount: 0,01
Maximum amount: 9.999.999.999,99
Distribution amnt: 0,00
Single paymentfor marked item selected
Foreign business partner allowed selected
foreign currency allowed selected
Cust/vend bank abroad allowed? selected
Bank selection control "No optimization" selected
Can you please help me to understand the error?
I'm afraid it is a problem with the bank but I don't understand why the payment of the vendor invoice is allowed and the customer invoice not.
Thank you very much in advance
Kind Regards
Emanuela

Vendor invoice workflow approval & Payment Run

Hi All,
I have this scenario happened (only happened in 3 documents):
1. Based on workflow log, user managed to release and approve vendor invoice (in FY2009)
2. Payment Run is executed against this invoice and posted (in FY2010)
3. The end result is:
    a. BKPF status is "V" (Parked Document)
    b. VBKPF - no record for the invoice
    c. Can't displayed the invoice under "Parked Document"
Any possible explanation how this can happen?
Thanks a lot for your attention and time,
Tony

Hi experts,
any suggestions?
Regards,
Elena

Clear Down payment against Vendor Invoice through Automatic Payment Program

Similar Messages

Maybe you are looking for