How to clear the down payment against the vendor invoice in the payment program?

A down payment is made $25 Later an invoice is posted for $100 Now i want to Pay $75 to Vendor But the Automatic payment program is not clearing the down payment against the vendor invoice. Could you please help how to clear the down payment against the vendor invoice in the payment program?

Swathi,
Need your help i have a strange situation
1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically
2) F-48 and document posted with document no= 15..... in company code = Us11 without payment block and the screen does not even show payment block, I had to check this from BSEG table
My question is
a) How and where does this payment block is triggered through configured and how to process next steps.
b) when I use F-48, how do we do the actual payment, is there a check printing and linking it to the KZ document or is check printing done outside the system and the KZ document type does not have any linkage.
c) If I do FB60 for a higher amount how do we pay partial amount.
Your response is appreciated.

Similar Messages

Vendor Invoicing in the Background

Hi,
We are trying to complete our backlog in SAP.
The Client wants to do Vendor Invoicing through BDC Upload Program. Is it advisable to upload the Vendor Invoice thru BDC?
Is there any possibility where we can do Invoicing in the Background? If yes, what extra precaution do we need to take? Do we need to do any configuration or Master Data Change to achieve the same?
What is the Use of T Code : MIRA.
Please guide.
Regards,

You can use BDC as it is one time to post backlog entries.
MIRA for Background invoice verification
For invoice verification in the background, you enter only header data such as
invoice date, reference, invoice amount, currency, tax information, and unplanned
delivery costs. You also assign the incoming invoice to one or more purchasing
documents or to a vendor. The data and allocation are saved. However, no item
list is generated, which means that the document does not contain any items.
Invoice verification in the background is suitable for the following transactions,
for example:
Posting invoices with mass data for which no verification should take place
at item level.
Posting invoices that refer to transactions not yet entered in the system
You have to use MIR6 for evaluation

HT4906 I tried to do the update but it reads that I don't have enough hard drive to do the update. How do clear up space on my hard drive to do the upte????

I tried to do the update but it reads that I don't have enough hard drive to do the update. How do clear up space on my hard drive to do the upte????

That is hard to say, as we do not know what you keep on your hard drive.
To free space
empty the trash, both on your Desktop and the Aperture Trash,
Delete files and folders you do not need
Move files to an external volume.
There are utilities that let you find large files, like Omni Disk Sweeper, but that is not a free application.

Why does pressing the down arrow button result in going to the bottom of the page and being nunable to go up or down one line at a time?

i dont know what to say in way of clarification. when looking at a page i am forced to use the "slide" on the margin which is very sensitive on very long documents instead of the down arrow to move one line. pressing the arrow results in going to the bottom and you cant return using the arrow.

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Clear one time customer against normal vendor in F110

Hi Gurus,
I am trying to see if it is possible to clear one time customer against normal vendor in F110.
Customer and vendor have been linked and clearing with customer/vendor have been ticked.
Customer invoice of $100 and vendor invoice of $150 have been posted.
In F110 proposal, the two entries appears as separate lines. The customer invoice has a red icon and it says that debit balance is not possible for payment.
What are the matching criteria for customer and vendor transactions in F110?
I suspect it is caused by different payment recipient. The customer transaction took the customer name as payment recipient (e.g. ABC Coy - 00000001 which we have seen often for one time customers/vendors) I entered during invoicing. It's blank for the vendor transaction.
Putting aside the reason why we are not using a normal customer, anybody has any ideas?
Thanks.

Hi,
Do you able to find a solution for your requirement.
My business need is also similar to your. If you have got a workaround,can you kindly share it.
Regards,

Credit memo against a vendor invoice

Hi All,
I am trying to post a credit memo against a vendor invoice. After posting the credit memo I want the outstanding balance against the vendor to be reduced by amount of credit memo when I do F-44: vendor clearing.
So for eg: if the invoice amount is $100 & credit memo amount is $10, I want to see only $90 in F-44. How can I achieve this?
Right now I see Invoice amount $100 & credit memo amount $10 separately.
Thanks!

Hi,
you have 3 ways to clear the Open line items(OLTs)
example:
1. follwoing document posted in FB01:
    invoice        : 40 expense 1000 USD/ 31 vend13 1000 USD
    credit memo:21 vend13     100 USD/ 40 expense 100 USD
2. A :you could clear above 2 OLTs using "charge off differece" in F-44, enter posting key 31, vendor and
        amount 900 USD. the result should be:
         001 31 0001 VEND13    900-
         002 27 0001 VEND13    900
   B:residual clearing in F-44, you will receive the below result:
      001 34 0001 VEND13 900-
      002 27 0001 VEND13 900
   But the re-requisition ifor above 2 solutions are the values in all fields which are includeded in structutre
   KONTAB_1ST are the same.
   C:partial payment in F-44, Below result:
       001 27 0001 VEND13   100
       002 37 0001 VEND13   100-
    Then clearing the the left amount 900 in invoice, you should select the inovice and the partial clearing
    document together.
Hope above infor. could help you to solve your query!
With Best Regards,
Gladys Xing

Payment Request for vendor invoices

Dear All
I have a situation where my client want that when Finance department receive the invoices from vendor they are posted to
FI but the payment of these should be released only when the Purchase department instruct them. So they want to raise a
payment request in SAP against specific vendor invoices by purchase department so that Finance department issues the payment of only those invoices which are mentioned in the Pyament request.
Is there any specific functionality available in SAP which can cater this requirement. I have worked on F-59 payment request however its functionality is different
you expert ideas are requested to solve this requirement
Many thanks
Regards
Bilal

HEllo,
Two ideas:
1- You can check f111. This program was designed to similar business need, I guess.
2- You can put a payment block ( by substitution for example ) on the invoices. Then, when you receive OK to pay you remove the payment block ( but this is not exactly the same thing you want ).
REgards,
REnan

Making Payment for Parked Vendor Invoice

Hi All
Is it possible to make payment for parked vendor invoice?
if yes,please let me know how does it possible and what are the required configuration?
Thanks in Advance
Regards
Praveen P C
Edited by: Praveen Chirakkel on Apr 5, 2011 5:44 AM

Hi,
An Invoice in the Parked status cannot be paid.. it needs to be posted in the system in order to be paid.
Post the Parked Invoice as mentioned by Atif here and then you can make Payment.
Regards,
SAPFICO

Payment method in vendor invoice

HI
i want to whether payment method in vendor invoice gets populated automatically from the vendor master record or we have to fill the payment method manually in the invoice. if we need to fill the payment method field manually is there any way i can make the payment method field mandatory in vendor invoice

Hi,
Payment method gets automatically populated from Vendor Master if it is already defined there. However, you can manually change in invoice.
In Vendor Master you can make the payment method a mandatory field and it will automatically populate Vendor Invoices.
Thanks
Murali.

How to link a down payment to an AR Invoice in the SDK

Hi,
I'm generating Invoices from Sales Order's.
I'm using SAPbobsCOM.BoObjectTypes.oInvoices.
The Down Payment's are made baesed on the sales order.
I need to link the down payments to the invoice.
How can i do that?
Regards,
Ana Silva

Hi Ana,
Try this code, it has worked for me:
Private Sub Command4_Click()
 Dim oInvoice As SAPbobsCOM.Documents
 Dim oDPM As SAPbobsCOM.Documents
 'Create DownPayment Invoice Object
 Set oDPM = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDownPayments)
 oDPM.GetByKey (3)
 ' Add invoice
 Set oInvoice = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
 oInvoice.CardCode = "C1001"
 oInvoice.DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Items
 oInvoice.DocDate = DateTime.Now
 oInvoice.Lines.ItemCode = "A1000"
 oInvoice.Lines.Quantity = 1
 ' Add the Invoice with Down Payment
 Dim dpToDraw As SAPbobsCOM.DownPaymentsToDraw
 Set dpToDraw = oInvoice.DownPaymentsToDraw
 'oDPM is an object that contains an existing DownPayment Invoice
 'dpToDraw.AmountToDraw = oDPM.DownPaymentAmount
 dpToDraw.DocEntry = oDPM.DocEntry
 lRetCode = oInvoice.Add()
 If lRetCode <> 0 Then
 oCompany.GetLastError oError, errMsg
 MsgBox (oError & " " & errMsg) ' Display error message
 Else
 MsgBox "Invoice with Downpayment created, the process of using a downpayment invoice succeeded"
 End If
End Sub
Hope this is helpful,
Regards,
Niall
SAP Business One Forums

Clear Down payment against Vendor Invoice through Automatic Payment Program

Hi
We have to adjust vendor invoice against down payment (Advance) made through automatic payment program (F110)
Please guide us is there any configuration require to consider Down payment transactions during F110 to clear against Vendor Invoice
Ex :1. Advance payment made through special GL indicator 50K.
2. Invoice document 75K posted in vendor.
3. Now we have to clear down payment made (50K) against 75K through F110.
Regards
Sreenivasulu

Hi srinivasulu,
First u create down payment request through F-47 and define the spl gl indicator for down payment and assign the gl account for down payment gl code..
Regards,
Nivas

How to clear vendor open items if vendor invoice currency and payment currency different

Hi All.
How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD but local currency is INR
while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
I checked all configuration, configuration wise no problem
BR.
Chandra

Hi Chandra,
You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
Invoice is in USD - 1000 & INR - 60000
Payment is in INR - 60000
Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
Vendor A/c Dr 60000 (invoice)
Vendor A/c Cr 60000 (Payment)
Gain from exchange rate A/c Cr 100 (60000 - 60100)
Small diff.write off A/c (or) Dummy A/c Dr 100
After done the above posting, we have to pass below manual JV in FB01
Gain from exchange rate A/c Dr 100
Small diff.write off A/c (or) Dummy A/c Cr 100
Regards,
Mukthar

Purchase Orders with outstanding invoice - How to clear these down?

Hi,
We have a large number of purchase orders with an outstanding invoice which will never be fulfilled. I would like to know what is the process for clearing these down so the purchase orders will be marked for archiving, and so they will not be visible when running me2m with selection parameter RECHNUNG. I've tried setting the final invoice flag but I can still see the order.
Thanks,
Steph.

you have to clear the GR/IR account with MR11.

How do we know tat a customer paid an invoice through the same Invoice no.

Hi gurus,
How do we know that a customer has paid an invoice through the same Invoice no.
If it is in accounting document no, can u say where it can be seen.
Moreover I want to generate a mail to customers who didn't pay their Invoice.
So wat field will be appropriate in an invoice to trigger an mail?
Regards,
vimal

Dear Vimal
In FBL5N, you have the options to choose "Open Items", "Cleared Items" and "All Items".
If you choose "Cleared Items", you can see a list of billing documents and on the left side, there will be a green circle which means, those invoices were paid by the customer.
Thanks
G. Lakshmipathi

How to clear the down payment against the vendor invoice in the payment program?

Similar Messages

Maybe you are looking for