Clear Package Not Working - Data File is Empty

Hi
I am trying to run a clear package against a precise section of data. However the package keeps erroring and the log file shows me the below:
TOTAL STEPS 3
1. Export_Zero:        completed in 1 sec.
2. Load Cube:          Failed in 1 sec.
3. Clear:              completed in 1 sec.
[Selection]
ENABLETASK= Yes
CHECKLCK= Yes
(Member Selection)
Category: OPM
Time: 2011.P01,2011.P02,2011.P03,2011.P04,2011.P05,2011.P06,2011.P07,2011.P08,2011.P09,2011.P10,2011.P11,2011.P12
Entity: TOT_ENTITY
AccLabour: WEIGHTED_EFF_ALL2
DataSrc: INPUT
Line: FB1
Machine: TOT_PROCESS
Product: NOPRODUCT
WIP: 56088876
[Messages]
The data file is empty. Please check the data file and try again.
I know there is data in this section of the database as I am running a report which looks at the same place and data can be found. From looking at other threads it has been recomended to turn off Data Audit. I've checked this and can confirm that this is switched off for this particular application (in other applications it is swithced on).
Please can someone advise what else I need to do in order to run this clear package successfully.
Thanks,
Jamie

Thanks Roberto
Having just read that thread I see that they mention that they are not clearing from a calculated member. I think the member we have been trying to clear from is a calculated one.
Would a clear from fact table allow us to clear the data against this member? Or would we need to clear the data against the non-calculated members which go into the calculation?
Kind Regards,
Jamie
UPDATE
I've managed to run the clear package, I was trying getting this error because I was running it against calculated members. When I chnaged it to run against the non-calculated members the package ran successfully and cleared the data values.
Thanks for your help
Edited by: jamiet440 on Nov 10, 2011 12:28 PM

Similar Messages

Clear Data Manager Package Error "The data file is empty."

Hi,
When I run the Clear data package in Data Manager, I receive the error "The data file is empty." I selected a very specific set of dimension values (none are calculated) and am on BPC 7.5 SP3. I subsequently turned on debugging to troubleshoot, but do not see any obvious issues leading the the error message. The log file with debugging turned on is below. Any help would be greatly appreciated!
Thanks.
Tom
TOTAL STEPS 3
1. Export_Zero: completed in 1 sec.
2. Load Cube: Failed in 0 sec.
3. Clear: completed in 0 sec.
[Selection]
ENABLETASK= Yes
CHECKLCK= Yes
(Member Selection)
Category: ACTUAL
Time: 2010.C_SEP
Affiliate: az_swhd
Account: Donor_DART_ID_1
Functional: Benchmark_F
Report: Cons
Restriction: AnyRestricted
[Messages]
The data file is empty. Please check the data file and try again.
[EvModifyScript Detail]
12-28-2010 17:30:05 - Debug turned ON
INFO(%TEMPFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(EXPORT_ZERO, APPSET, ESMetrics)
TASK(EXPORT_ZERO, APP, CONSOLIDATED)
TASK(EXPORT_ZERO, USER, NESSGROUP\tbardwil)
TASK(EXPORT_ZERO, FILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(EXPORT_ZERO, SQL,
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
TASK(EXPORT_ZERO, DATATRANSFERMODE, 2)
TASK(LOAD CUBE, APPSET, ESMetrics)
TASK(LOAD CUBE, APP, CONSOLIDATED)
TASK(LOAD CUBE, USER, NESSGROUP\tbardwil)
TASK(LOAD CUBE, FILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(LOAD CUBE, DATATRANSFERMODE, 4)
TASK(LOAD CUBE, DMMCOPY, 0)
TASK(LOAD CUBE, PKGTYPE, 0)
TASK(LOAD CUBE, CHECKLCK, 1)
TASK(CLEAR COMMENTS, APPSET, ESMetrics)
TASK(CLEAR COMMENTS, APP, CONSOLIDATED)
TASK(CLEAR COMMENTS, USER, NESSGROUP\tbardwil)
TASK(CLEAR COMMENTS, DATATRANSFERMODE, 0)
TASK(CLEAR COMMENTS, SELECTIONORFILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(CLEAR COMMENTS, ENABLETASK, 1)
TASK(CLEAR COMMENTS, CHECKLCK, 1)
INFO(%ENABLETASK%, 1)
INFO(%CHECKLCK%, 1)
INFO(%SELECTION%, [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'))
INFO(%TOSELECTION%, [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'))
INFO(%APPSET%, ESMetrics)
INFO(%APP%, CONSOLIDATED)
INFO(%CONVERSION_INSTRUCTIONS%, )
INFO(%FACTCONVERSION_INSTRUCTIONS%, )
INFO(%SELECTIONFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\FROM_51_.TMP)
INFO(%TOSELECTIONFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\TO_51_.TMP)
INFO(%DEFAULT_MEASURE%, PERIODIC)
INFO(%MEASURES%, Periodic,QTD,YTD)
INFO(%OLAPSERVER%, ETSCSAP047940.EASTER-SEALS.ORG)
INFO(%SQLSERVER%, ETSCSAP047940.EASTER-SEALS.ORG)
INFO(%APPPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\)
INFO(%DATAPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\DataFiles\)
INFO(%DATAROOTPATH%, C:\BPC\Data\WebFolders\)
INFO(%SELECTIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\SelectionFiles\)
INFO(%CONVERSIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\ConversionFiles\)
INFO(%TEMPPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\)
INFO(%LOGICPATH%, C:\BPC\Data\WebFolders\ESMetrics\Adminapp\CONSOLIDATED\)
INFO(%TRANSFORMATIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\TransformationFiles\)
INFO(%DIMS%, [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[Time])
INFO(%FACTDIMS%, [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID])
INFO(%CATEGORY_DIM%, [Category])
INFO(%TIME_DIM%, [Time])
INFO(%ENTITY_DIM%, [Affiliate])
INFO(%ACCOUNT_DIM%, [Account])
INFO(%CURRENCY_DIM%, )
INFO(%APP_LIST%, Consolidated,ES_INC,GrantMgmt,LegalApp,LRate,Ownership,Rate)
INFO(%ACCOUNT_SET%, DONOR_DART_ID_1)
INFO(%AFFILIATE_SET%, AZ_SWHD)
INFO(%CATEGORY_SET%, ACTUAL)
INFO(%FUNCTIONAL_SET%, BENCHMARK_F)
INFO(%REPORT_SET%, CONS)
INFO(%RESTRICTION_SET%, ANYRESTRICTED)
INFO(%TIME_SET%, 2010.C_SEP)
INFO(%ACCOUNT_TO_SET%, DONOR_DART_ID_1)
INFO(%AFFILIATE_TO_SET%, AZ_SWHD)
INFO(%CATEGORY_TO_SET%, ACTUAL)
INFO(%FUNCTIONAL_TO_SET%, BENCHMARK_F)
INFO(%REPORT_TO_SET%, CONS)
INFO(%RESTRICTION_TO_SET%, ANYRESTRICTED)
INFO(%TIME_TO_SET%, 2010.C_SEP)
INFO(DATAMGRGLOBALBPU, )
INFO(DATAMGRGLOBALCLIENTMACHINEID, ETSCWLT048794)
INFO(DATAMGRGLOBALERROR, )
INFO(DATAMGRGLOBALPACKAGEINFOR, )
INFO(DATAMGRGLOBALPACKAGENAME, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\PackageFiles\System Files/Clear.dtsx)
INFO(DATAMGRGLOBALSEQ, 51)
INFO(DATAMGRGLOBALSITEID, )
INFO(MODIFYSCRIPT, DEBUG(ON) PROMPT(SELECTINPUT,[CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'),,"SELECT THE MEMBERS TO CLEAR",[Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[Time]) PROMPT(RADIOBUTTON,1,"DO YOU WANT TO CLEAR COMMENTS ASSOCIATED WITH DATA REGIONS IN BPC?",1,{"YES","NO"},{"1","0"}) PROMPT(RADIOBUTTON,1,"SELECT WHETHER TO CHECK WORK STATUS SETTINGS WHEN DELETING COMMENTS.",1,{"YES, DELETE COMMENTS WITH WORK STATUS SETTINGS","NO, DO NO DELETE COMMENTS WITH WORK STATUS SETTINGS"},{"1","0"}) INFO(C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempfdla_51_.tmp) TASK(EXPORT_ZERO,APPSET,ESMetrics) TASK(EXPORT_ZERO,APP,CONSOLIDATED) TASK(EXPORT_ZERO,USER,NESSGROUP\tbardwil) TASK(EXPORT_ZERO,FILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(EXPORT_ZERO,SQL,
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
) TASK(EXPORT_ZERO,DATATRANSFERMODE,2) TASK(LOAD CUBE,APPSET,ESMetrics) TASK(LOAD CUBE,APP,CONSOLIDATED) TASK(LOAD CUBE,USER,NESSGROUP\tbardwil) TASK(LOAD CUBE,FILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(LOAD CUBE,DATATRANSFERMODE,4) TASK(LOAD CUBE,DMMCOPY,0) TASK(LOAD CUBE,PKGTYPE,0) TASK(LOAD CUBE,CHECKLCK,1) TASK(CLEAR COMMENTS,APPSET,ESMetrics) TASK(CLEAR COMMENTS,APP,CONSOLIDATED) TASK(CLEAR COMMENTS,USER,NESSGROUP\tbardwil) TASK(CLEAR COMMENTS,DATATRANSFERMODE,0) TASK(CLEAR COMMENTS,SELECTIONORFILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(CLEAR COMMENTS,ENABLETASK,1) TASK(CLEAR COMMENTS,CHECKLCK,1) BEGININFO(
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
) SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) AS ZEROTABLE GROUP BY [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1) ENDINFO )
Edited by: Tom Bardwil on Dec 28, 2010 5:20 PM

You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) and the release (5.1, 7.0, 7.5) of BPC which you are using.
Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future to be able to reach the right audience for your question.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Clear Data package - "The data file is empty." Error

Hi,
When I run the Clear package in Data Manager, I get the error "The data file is empty". We are running BPC 7.5 SP3. There are no calculated members selected. Any suggestions?
Thanks.
Tom

Hi Tom,
If i'm not mistaken when we run the clear data package, BPC inserts -ve values for the combination of dimensions selected.
For ex if you have selected time as 2010.DEC it would reverse out all these values by inserting negative values which would then total up to zero.
So i still think it could be a problem with the Transformation file.
P.S. Maybe you can try using the Clear from Fact table package.
Santosh

Error data file is empty in standard Copy package

Hi,
We have an appset that consists of four applications and we can't successfully run Data Manager Copy package in one of them. It launches the following tasks: Dump, Convert (execution fails in this step with error "Data file is empty") and Load. SSIS configuration in BIDS is defined by default and we haven't set any parameter.
We have figured out this error appears when we select any member of a dimension in "COPYMOVEINPUT" prompt except for Time dimension. Previously there was a custom Copy package based on standard BPC and it only filters by Time dimension. Perhaps this error is related to application configuration to run custom package.
We show code:
INFO(%TEMPFILE1%,%TEMPPATH%%RANDOMFILE%)
INFO(%TEMPFILE2%,%TEMPPATH%%RANDOMFILE%)
TASK(DUMP,APPSET,%APPSET%)
TASK(DUMP,APP,%APP%)
TASK(DUMP,USER,%USER%)
TASK(DUMP,FILE,%TEMPFILE1%)
TASK(DUMP,SQL,%SQLDUMP%)
TASK(DUMP,DATATRANSFERMODE,2)
TASK(CONVERT,INPUTFILE,%TEMPFILE1%)
TASK(CONVERT,OUTPUTFILE,%TEMPFILE2%)
TASK(CONVERT,CONVERSIONFILE,%CONVERSION_INSTRUCTIONS%)
TASK(LOAD,APPSET,%APPSET%)
TASK(LOAD,APP,%APP%)
TASK(LOAD,USER,%USER%)
TASK(LOAD,FILE,%TEMPFILE2%)
TASK(LOAD,DATATRANSFERMODE,4)
TASK(LOAD,DMMCOPY,1)
TASK(LOAD,CLEARDATA,%CLEARDATA%)
TASK(LOAD,RUNTHELOGIC,%RUNLOGIC%)
TASK(LOAD,CHECKLCK,%CHECKLCK%)
Any variables as %CONVERSION_INSTRUCTIONS% aren't defined. Is it a system constant?
Thanks.

Hi Roberto,
Thanks for having a look at my question.
We're using .act files to upload data from SAP BW into SAP BPC.
This is the content of .act file that I'm trying to upload:
ACTUAL
1
1
GCN.CZN,2621.LC_.EUR,100.5000
GCN.CZN,2621.TC_.CZK,7050.0000
Transformation file looks like:
Conversion files are:
Time:
Category:
Entity:
Counterpart:
RCCinterco:
IntercoCurr:
Transcurrency:
In case of any other info needed, please let me know.
Thanks a lot in advance,
Wai Yee Kong

"file.txt" does not exist, or file is empty; you cannot upload empty files

All,
I am trying to upload a file in Content Management --> Explorere --> 'Public Document' and get the following error "file.txt" does not exist, or file is empty; you cannot upload empty files.
We have a EP 2004s install.
Any thoughts would be appreciated.
SAP Partner

Try have a look at the following note: 898637: Upload to KM does not work
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_ep_km/~form/handler%7B5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383938363337%7D">Upload to KM does not work</a>
The error seems to be related to a problem with writing into the directory for temporary data.

Can not restore data files from backup set

I am trying to restore Server A's backup data to Server B (they are all oracle11g) using rman. The restore commands is below:
rman target /;
shutdown immediate;
startup nomount;
restore controlfile from '/usr/local/oracle/backup/20100418/ctl_xxx'
alter database mount;
catalog start with '/usr/local/oracle/backup/20100418/';
restore database;
recover database;
alter database open resetlogs;
For the first time, it works. But when i tried to restore another backup data by the same way:
rman target /;
shutdown immediate;
startup nomount;
restore controlfile from '/usr/local/oracle/backup/20100425/ctl_xxx'
alter database mount;
catalog start with '/usr/local/oracle/backup/20100425/';
restore database;
recover database;
alter database open resetlogs;
The second time, i found that rman restore the old backup data, which means that it restore the data file under '/usr/local/oracle/backup/20100418/' instead of '/usr/local/oracle/backup/20100425/'.
So I run 'list backup of database summary' to see the backup set lists in control file.
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
910 B 0 A DISK 18-APR-10 1 1 NO TAG20100418T020007
945 B 0 A DISK 25-APR-10 1 1 NO TAG20100425T020007
But when i run ‘restore database preview summary’ to see the backup set list to restore
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
910 B 0 A DISK 18-APR-10 1 1 NO TAG20100418T020007
there's no backup set 945 at all. that's why i could not restore data file under '/usr/local/oracle/backup/20100425/' at the second time.
So, why two backup list is different ? how can i restore datafile under '/usr/local/oracle/backup/20100425/' ?
My backup script is below:
run{
allocate channel c1 type disk;
backup incremental level 0 as backupset format '$DIR/`date +%Y%m%d`/data_%d_c0_%T_%u' database;
sql 'alter system archive log current';
backup archivelog from time 'sysdate-14' format '$DIR/`date +%Y%m%d`/log_%d_%T_%u';
backup current controlfile format '$DIR/`date +%Y%m%d`/ctl_%d_%T_%I_%u';
release channel c1;
Thanks
Edited by: user13055376 on 2010-4-29 上午1:20

yeah, I am sure Tag: TAG20100425T020007 exists
RMAN> list backupset 945;
List of Backup Sets
BS Key Type LV Size Device Type Elapsed Time Completion Time
945 Incr 0 6.40G DISK 00:05:46 25-APR-10
BP Key: 945 Status: AVAILABLE Compressed: NO Tag: TAG20100425T020007
Piece Name: /usr/local/oracle/backup/20100425/data_QIANGL_c0_20100425_thlbvjt7
List of Datafiles in backup set 945
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/system01.dbf
2 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/sysaux01.dbf
3 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/undotbs01.dbf
4 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/users01.dbf
5 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/dict01.dbf
6 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/support01.dbf
7 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/supportindex01.dbf
8 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/log01.dbf
9 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/logindex01.dbf
10 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/lobindex01.dbf
11 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/data01.dbf
12 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/indexes01.dbf
13 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/image001.dbf
14 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/tongbuimage001.dbf
15 0 Incr 2498880165194 25-APR-10 /usr/local/oracle/oradata/qiangl/imagebackup001.dbf
My purpose is to use the newest backupset of Server A to update Server B. So if Server A crush, Server B will be useful. Is there any other way to do that ?
retention policy :'configure retention policy to redundancy 4'
And Server A do LV0 backup every 7 day, and do LV1 backup ervery other day.
Edited by: user13055376 on 2010-4-29 上午3:45

File does not exist, or file is empty; you cannot upload empty files

Hello,
I've a problem when trying to upload any file to KM Repository (Content Administrator-KM Content-Root-documents). It shows the following error: File does not exist, or file is empty; you cannot upload empty files.
I have applied SAP note 898637 but is still not working. We're using SAP EP 7.0 SP11.
Please, what could be the problem?
Thanks in advance,
Belé

We've put the Java paremeters in Configtool.bat :
-Djava.io.tmpdir=c:/EP_TEMP
-Dcm.tmpdir=c:/EP_TEMP
In Server/Instance. Folders: Message Server&BootStrap and in Servers General and in Instances/Server.
I hope this helps you,
Regards

FPMA auto Clearing is not working.

Hi All,
FPMA auto Clearing is not working.
Scenario
Contract account is having open invoices and also open credit items. The total open invoice amount is equal to the total open credit items. So the contract account balance is ZERO.But the open credit items and open invoices are not having a clearing document because its not cleared. I have executed FPMA transaction with proper parameters but auto clearing is not happend.
Questions are:
1) what would be the reason behind not functioning the auto clearing
2) Job log of the FPMA program is showing exceptions ( some times with execption 6 and some times with 10,etc) . is there any table to check exceptions.
3) what is the diff between FPL9 ( account maintenance ) and FPMA auto clearing.
Regards,
Will

Hi,
I have put together all the possible scenarios in my previous post against the failure of auto clearing.
Now to elaborate my point (i)(ii)-
(a) There is an object called clearing lock which you will find at the document level.which you will find in the payment data tab of the display document screen.
If there is any value in the clearing lock, it indicates that the particular item will not be cleared.
Also check for the posting lock field at the contarct account level. This field prevents any new line item to be posted into the account.
(b) Items which have clearing restriction 8 can't be cleared with any other item nor they can be dunned.Clearing restriction field is also there in the the payment data tab of the display document screen.
I would recommend you to perform the clearing through Account maintaineance (FP06). If it gets cleared, then there is some bug in the clearing control config for Auto clearing.
If it doesn't, then it will throw some error in the status bar. Just go thru the error and you will be analyse it further.
Hope it helps.
Thanks,
Amlan

I bought creative suite cs6 design standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged - none of the program items work at all. File size for installation seems very small for a product of this

I bought creative suite cs6 standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged. File size seems very small for a product of this size. Can you assist with download issue or provision of software ?

Lalalaladog where did you download CS6 from? I would recommend downloading the installation files for Creative Suite 6 Design Standard at Download CS6 products

N81 clear key not working

My N81 has problems with the clear key not working which is very frustrating when SMSing I have had it back for repair once but still not working. Any suggestions?

Your only option is to take it in for repair again and demand that it is repaired. Make sure you take it to a nokia care point, not just any phone repair shop.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

Opening bank data files in a PDF format not working, the file defaults to Quicktime and only displays one page.

Opening bank data files, while logged into the bank or brokerage sites, by clicking on the PDF or file name icon, is supposed to open in PDF format but instead opens only a single page in Quicktime. This also happened several years ago in Leopard and required the removal of Quicktimeplugin.plugin. I have tried doing that in Lion with no success. Any thoughts?

Gerry Brown wrote:
"from that page" does not make sense.
The file exists in a folder on your machine, correct?
If not, you need to download the file from your bank. Or use "Save as" in the browser.
No the file is on the Webpage he is visiting.
@ OP Right click on it and select Save File As. then save it to your HDD. Then open it.

Finder not working well-show folders empty

Hi,
for some times now I have problems with finder.
First I thought it was a problem accessing the network but I also have the problem with the local folders!!
After logging to my account, it works well for some times and then suddenly (may be after accessing machine on my network - Synology NAS) finder begin to show all folders as they are empty!!!
The funny thing is that if for instance I do a "file/open" within an app or do an attachment and so access a "windows like finder" it works!!
But if I use the finder ... folders are empty (shown as ...).
The only thing to get everything back is to restart the computer (and many times I have to hard stop the machine as the finder is not working anymore and my mac mini don't want to restart. I keep the desktop background and nothing happened!!
The strange thing is that it seems I don't have the problem on my MacBook Pro!!
The mac mini was a clean install!
So many problem with Yosemite!!!
Ragards

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

SCCM 2012 Primary Site Recovery - Packages not working

I recently had to recover my Primary Site due to system crashes with blue screens on a daily basis. I was running ConfigMgr 2012 SP CU 3 and as part of the process I migrated from WS2008 R2 to WS2012 R2.
After many hours of perusing the web, I found the solutions to deal with the common site recovery issues such as SSL certs, and the content validation due to an empty ContentLib folder. I also had the issue with the update source where it listed the old
WSUS 3.2 server and the new one so the Site GUID was also updated.
The issue I am currently experiencing is that packages new or old including software update packages are not working. When using the script by Peter VanWoulde it lists the Deployment State as Error. I have tried redistributing them, valdiating the content,
removing distribution points, adding in new distribution points and even recreating some of the smaller packages to test but nothing is working.
Application deployments are working without issues.
This is the tail end of the WindowsUpdate.log file
2013-11-20 22:03:27:281 1632 a84 COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = CcmExec]
2013-11-20 22:03:28:098 1632 a84 COMAPI - Updates found = 176
2013-11-20 22:03:28:098 1632 a84 COMAPI ---------
2013-11-20 22:03:28:098 1632 a84 COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2013-11-20 22:03:28:098 1632 a84 COMAPI -------------
2013-11-20 22:03:32:139 1020 980 Report CWERReporter finishing event handling. (00000000)
This is the UpdatesDeployment.log file
Assignment {FD1118D2-563C-44D4-99DB-0CBE29C5C01A} has total CI = 432 UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
Deadline received for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
Detection job ({F5229872-7A7E-4692-B709-63989F708AF0}) started for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
Progress received for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:26 AM 4572 (0x11DC)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:50 AM 3588 (0x0E04)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:51 AM 3588 (0x0E04)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:55 AM 3588 (0x0E04)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:55 AM 2908 (0x0B5C)
At this point I am running out of ideas of where to look.

Hi Xin,
Sorry for not responding earlier but I did recover the site using the guidelines in the following article Backup and Recovery in Configuration Manager,
however there were a few issues.
I did not have a ContentLib backup so all the content had to be redistributed and validated before that worked. None of my packages new or old would work. I eventually found an article from a forum member who also initiated a Site Reset as part of their
recovery process and had no issues.
So it seems that any packages are still not working and i think I narrowed it down.
For some reason even though my DP and MP are all set for HTTPS, it is trying to access the HTTP path for SMS_DP_SMSPKG$. I am using PKI certs so this is the correct path but it should be HTTPS.
Excerpt from log.
Retrying DoUpdateSourceListAll task SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} is installed for user SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Adding 2 local DPs and 0 remote DPs for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Adding install source C:\Windows\ccmcache\5l\ to source list for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
UpdateURLWithTransportSettings(): OLD URL - http://xxxxx.com/sms_dp_smspkg$/p01000ae SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
UpdateURLWithTransportSettings(): HTTP requested but client settings prohibit it. SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Failed source list update for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E}, error 87d00226 SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
DoUpdateSourceListAll task failed, error code 87d00226 SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Source list update task failed, will be retried after 3600 seconds SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
MSI update source list task finished successfully SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)

SSIS package not working on 2012 Integration Service Catalog deployment

I've set up a package that imports data from an excel spreadsheet(my only possible data source). I deployed it and it worked for a while and then broke. I had to switch to a generated connection string for excel with IMEX=1 to make things work.
Now it works fine on from Visual Studio on my local machine, but when I run it from Integration Services I get:
"The external column "<COLUMN NAME>" needs to be updated, for every column in the spreadsheet. I am using the same excel file on my local machine as on the other machine.
Why can't I get it to work when it's deployed to the SSIS Server?

Hi,
Excel files are a bit tricky to work with. Any small change in data type, metadata can make your package fail.
I have had such experience earlier. The file contents, columns everything was same but it used to fail with same metadata issue.
Here is what helped me:
1. I tried to clear all formatting using the excel formatting options and it worked for me. But we can't ask the users to do all these things manually before uploading files to the application.
2. So, I created a new excel file and created all column headers manually. Please make sure don't copy paste from any other excel file otherwise formatting and metadata will get changed.
3. Once you have the template ready. Configure your package Excel columns according to the template.
4. Now, If you copy and paste data into this plain formatting free file, data will adapt the template settings and won't give the metadata errors.
5. We uploaded the same template on our application and users created the data in same template which resolved the issue for us.
CSVs on the other hand don't have any such issues.
Hope this helps. Good Luck!

Clear Package Not Working - Data File is Empty

Similar Messages

Maybe you are looking for