Click button to 'show' strange behaviour

I have a slide with 3 click boxes which when clicked 'show' text captions that are set to be invisible on slide load.
For some reason when a click box is clicked it shows the associated text caption (great) but then sometimes it automatically continues onto the next slide. Sometimes it doesnt continue to the next slide on the first click box but on the 2nd click box instead.
For info - there is a 4th click button on the bottom of the slide which is used to navigate to the next slide.
What is causing this behaviour? I have done this sort of thing before on other projects which work fine.

Hello,
Did you use simple actions to show objects? In that case, the moving on of the play head is the to be expected behavior. Have a look at:
http://blog.lilybiri.com/why-choose-standard-over-simple-action
But your other sentence 'I have done this sort of thing before on other projects which work fine'?
So please, explain how you use click box to trigger the show effect, where the pausing point of the click boxes is? Perhaps post a screenshot of the timeline?
Lilybiri

Similar Messages

CRviewer do not show anything when click button to show report with VS2013

First of all I must say, My English language skill is not good but I'll try to communicate as best as possible.
I am using Visual Studio 2013Ultimate with Update4 on .NetFramework 4.5.1 and Crystal Reports SP13.0.13.1597
When installed complete. ( Previously i have tried it with my project but CR & CRviewer not working)
I have tried using CRviewer in a new asp.net page The following code
***-----WebFrom1.aspx-----***
<body>
    <form id="form1" runat="server">
    <div>
    <asp:RadioButton ID="rdoByAll" runat="server" Text="all" GroupName="rdoChoose" AutoPostBack="True" />
        FromDate :
        <asp:TextBox ID="txtDateFrom1" runat="server" AutoPostBack="True"></asp:TextBox>
        ToDate :
        <asp:TextBox ID="txtDateTo1" runat="server" AutoPostBack="True"></asp:TextBox>
        <asp:Button ID="btnCallReport1" runat="server" Text="CallReport" />
        <br />
        <br />
        <asp:RadioButton ID="rdoByName" runat="server" Text="ByName" GroupName="rdoChoose" AutoPostBack="True" />
        FromDate :
        <asp:TextBox ID="txtDateFrom2" runat="server" Height="16px" Width="150px" AutoPostBack="True"></asp:TextBox>
        ToDate :
        <asp:TextBox ID="txtDateTo2" runat="server" Height="16px" Width="150px" AutoPostBack="True"></asp:TextBox>
<asp:Button ID="btnCallReport2" runat="server" Text="CallReport" />
        <asp:DropDownList ID="ddlNamelist" runat="server" AutoPostBack="True">
        </asp:DropDownList>
        <br />
        <br />
        <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="True" ToolPanelView="None" />
        <br />
    </div>
    </form>
</body>
***-----WebFrom1.aspx.vb-----***
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Imports CrystalDecisions.Web
Public Class WebForm1
    Inherits System.Web.UI.Page
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
    End Sub
Protected Sub rdoByAll_CheckedChanged(sender As Object, e As EventArgs) Handles rdoByAll.CheckedChanged
        If rdoByAll.Checked = True Then
            txtDateFrom1.Enabled = True
            txtDateTo1.Enabled = True
            btnCallReport1.Enabled = True
            txtDateFrom2.Enabled = False
            txtDateTo2.Enabled = False
            btnCallReport2.Enabled = False
            ddlNamelist.Enabled = False
        Else
            txtDateFrom1.Enabled = False
            txtDateTo1.Enabled = False
            btnCallReport1.Enabled = False
            txtDateFrom2.Enabled = True
            txtDateTo2.Enabled = True
            btnCallReport2.Enabled = True
            ddlNamelist.Enabled = True
        End If
    End Sub
    Protected Sub rdoByName_CheckedChanged(sender As Object, e As EventArgs) Handles rdoByName.CheckedChanged
        rdoByAll_CheckedChanged(sender, e)
    End Sub
    Protected Sub btnCallReport1_Click(sender As Object, e As EventArgs) Handles btnCallReport1.Click
        Dim rpt As New ReportDocument()
        rpt.Load(Server.MapPath("CrystalReport1.rpt"))
        Me.CrystalReportViewer1.ReportSource = rpt
        Me.CrystalReportViewer1.RefreshReport()
    End Sub
End Class
When i press F5 to run project make Code of radiobutton not work(Disable,Enable OtherControl such as textbox)
And when i try press CallReportButton CRviewer do not show anything.
When I brought CRviewer leaving the page ,Code of Radiobutton were working fine.
But can't to show "CrystalReport1.rpt" on CRviewer when i click CallReportButton. i'm not understand.
Then i have tried to learn from follow this link : CR not working in visual studio 2013
and Using Crystal Report in ASP.Net website, Report not showing in CrystalReportViewer
i have to create a new CR ASP NET project and copy the whole C:\inetpub\wwwroot\aspnet_client folder
into my app folder and then add this to your web.config file, line in bold: <add key="vs:EnableBrowserLink" value="false"/>
project is working but not fine when I try to click button to call report I get this pop-up .   " popup.JPG"   what is it?
And project warning! could not find schema information every element . "Could not find every Element.JPG"
After that, copy the whole C:\inetpub\wwwroot\aspnet_client folder into my app folder Only! not add in my web.config
(In previous project need to use CR) make to project were working but i get same pop-up when i click to show report.
**** buleline in popup.JPG picture is "The report you requested requires further information"

I think you're over-complicating things. I'd like you to have a look at a few sample apps, see how they work, then adjust your app. Samples are here:
Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
Also, have a look at Crystal Reports for Visual Studio 2005 Walkthro... | SCN (- applies to all versions of CR and .NET).
Finally, the Developer Help files are here:
SAP Crystal Reports .NET SDK Developer Guide
SAP Crystal Reports .NET API Guide
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

Cursor shows strange behaviour in 10.9.5

HI,
I'm using a 15" MBPr late 2013, i7, 16 GB RAM, 1 TB SSD, running on 10.9.5. Lately I registered a very strange behaviour of the cursor when using the built in trackpad. If hovering over one of the symbols in the bar at the upper right corner of the screen and then moving the cursor downward, the menu of the symbol on the right of the cursor pops up (not the one the cursor ist pointing on).
For example: the symbol for WiFi is located left from the one regulating the volume. When hovering over WiFi and moving downwards to activate/deactivate it, the volume-controle pops up ! If I want to use the WiFi, I have to hover over the symbol for bluetooth-connectivity instead....
Any idea whats happening here ?
Help is very much appreciated !
MIchael

OK, found the solution by myself. The reason seemed to be related to the resolution of the display. Changed it to another one (no matter which one), waited for the display to change and the changed the res back to optimal for display.
The cursor now works fine and exactly....
Really weird.

FF 4 (mac) doesn't display handcursor in all Flash websites. Also all html websites show strange behaviour with cursor. (blinking cursor in nearby div after clicking a button)

I'm running Mac OS 10.6
FF4 doesn't display the hand cursor or type cursor in '''all''' flash websites on links/textfieldss when it should. Highly annoying and disgracing all flashcontent.
Also with html websites I experienced strange cursor behaviour with FF4. Although it's hard to reproduce the problem. It's very inconsistent.
I have the feeling in general FF4 should look into it's cursor behaviour on all possible platforms. Mainly Flash.

I replicated the typing cursor problem on the popular FB. Just click e.g. "x people like this", you'll see you get a blinking type cursor in the "close" button.

Flash 8 login showing strange behaviour

I am developing a Flash 8 login for my website but the
problem is once loaded I fill in my credentials and press login....
It only recieves the password and not the username (alert box
used to show this) and once first attempt is over I try again and
nothing is alerted - something to do with caching?
Anyway here is the actionscript 2 that I believe is causing
the problem:
import flash.external.ExternalInterface;
var callJS = new Object();
btn_ok.addEventListener("click",callJS);
callJS.click = function(evt: Object)
//create a new LoadVars object
myvars = new LoadVars();
//set variables in the object
myvars.user = txt_login.text;
myvars.pass = txt_password.text;
ExternalInterface.call("Login", user, pass);
Thanks anyone

Of course oops.
Well this is my latest attempt with the help of a tutorial
(tutorial not using AJAX though, PHP):
import flash.external.ExternalInterface;
btn_ok.onRelease = function()
var myLogin:String = txt_login.text ;
var myPassword:String = txt_password.text ;
maVariable = new LoadVars();
maVariable.var_login = myLogin ;
maVariable.var_password = myPassword;
maVariable.onLoad = function()
if ( maVariable.allow == 1)
getURL("index.php");
else
txt_result.text = "Login/Password incorrect";
ExternalInterface.call("Login", maVariable)
This gives a weird error i.e. it refers to code I did not
know existed. Anyway this is wrong as the AJAX will have to recieve
two variables (username and password) not one (maVariable). Or
maybe AJAX can split the maVariable and then use it?
Cheers

Button tabular form strange behaviour

Hello everibody.
Working with Oracle 10G Forms & Database.
I have a tabular form. In this I have some buttons added to every row of tabular.
I use a Access Key to can execute any of those buttons.
The problem.
If I use the Access Key the trigger fired ever use the data of 1º record in tabular form, maybe Im situate in 5º record if I use access key the trigger take the data of 1º record. If I clik ,whith mouse on the button it take the properly record data.
Any idea wellcome.
Thanks in advanced to all.

Access-Keys will not work properly in a tabular form. The access-key should be unique to the form, if there is more than one time the same access-key, the first one fires, and in a multirecord-block the first one is the first record.

Strange behaviour, threading?

Hiya, i have written a program which is showing strange behaviour (only strange becuase i dont understand it). Effectivly its a counter of sorts, which displayed a number on a jpanel. Now when i set a loop running which looks something like this
for(int run = 0; run < 10000; run++){
jPanel.counterNo++;
jPanel.repaint();
}everything works fine and the screen repaints many times before its finished, but when this loop is initiated by a swing object, in this case a JButton, only the final value is displayed at the end of the loop, as if the jpanel is blocked from repainting until the loop is finished. Could anyone explain to me why this is happening?
Thanks
Dori

You need to call this in a separate (non UI) thread to see the updates hitting the UI
read the javadocs about Thread, Runnable, and SwingWorker

EJB and JSP. Strange behaviour with buttons

I have an EJB (called Vault) which (apart from all the essential stuff) contains only:
public String getIndex()
return Integer.toString(++index);
private int index = 0;
I have a page which displays three buttons. Each time a button is clicked, the EJB getIndex() is called, and the value reported. I would expect to get the sequence of numbers 1, 2, 3, 4, ... whenever any button is clicked. And so I do, until I change to a previously clicked button when it displays the same value it displayed when that button was last clicked! In this case, not only does the EJB give the wrong answer, but System.out.println gives no output! (Same problem?) Pressing the button again gives the expected value from the sequence. Continually clicking the same button gives the expected result.
This is a simplified version of code that was presenting a similar problem; on re-pressing a button, old data was being displayed.
HTML/JSP code below.
Any insights would be greatly appreciated.
John
Frame page defines javascript for three buttons:
<HTML>
<HEAD>
<TITLE>Vault</TITLE>
<SCRIPT LANGUAGE="JavaScript">

</SCRIPT>
</HEAD>
<FRAMESET onLoad="initialize()" FRAMEBORDER="0" FRAMESPACING="0"
BORDER="0" rows="250, *">
<FRAME SRC="Browse.html" NAME="treeFrame">
</FRAMESET>
</HTML>
Initial page Browse.html
<HTML>
<HEAD>
<TITLE>Browse</TITLE>
</HEAD>
<BODY>
<form>
<INPUT TYPE=BUTTON OnClick="javascript:top.one()" VALUE="1">
<INPUT TYPE=BUTTON OnClick="javascript:top.two()" VALUE="2">
<INPUT TYPE=BUTTON OnClick="javascript:top.three()" VALUE="3">
</form>
</BODY>
</HTML>
DisplayData.jsp
JSP page used to call EJB functions:
<%@ page import="webvault.Vault,webvault.VaultHome,javax.ejb.*,
java.math.*, javax.naming.*, javax.rmi.PortableRemoteObject,
java.rmi.RemoteException" %>
<HTML>
<HEAD>
<TITLE>DisplayData</TITLE>
<SCRIPT LANGUAGE="JavaScript">
</SCRIPT>
</HEAD>
<BODY>
<%!
private Vault vault = null;
public void jspInit()
try
InitialContext ic = new InitialContext();
Object objRef =
ic.lookup("java:comp/env/ejb/webvault/TheVault");
VaultHome home =
(VaultHome)PortableRemoteObject.narrow(objRef, VaultHome.class);
vault = home.create();
catch (Exception ex)
System.out.println("jspInit exception: " +
ex.getMessage());
String handleAction(String action)
StringBuffer sb = new StringBuffer(action);
try
sb.append("\nVault.getIndex(): ");
sb.append(vault.getIndex());
catch (Exception ex)
sb.append("\nException: ");
sb.append(ex.getMessage());
return sb.toString();
%>
<form>
<INPUT TYPE=BUTTON OnClick="javascript:top.one()" VALUE="1">
<INPUT TYPE=BUTTON OnClick="javascript:top.two()" VALUE="2">
<INPUT TYPE=BUTTON OnClick="javascript:top.three()" VALUE="3">
</form>
<%
String action = request.getParameter("Action");
String js = handleAction(action);
System.out.println(js);
%>
<%= js %>
</BODY>
</HTML>

This is not an EJB problem as I thought, as I can duplicate it with a
normal Java class called from JSP page; in fact its an IE special
feature. It works fine under Netscape, and only shows the offending
behaviour under IE (thank you again Micros**t). So its back to
Netscape as standard for me!
John

I cannot get the Output Module to work. I was able to get the button to show up, but when I click on it, nothing happens. i need to export a PDF asap

I cannot get the Output Module to work. I was able to get the button to show up, but when I click on it, nothing happens. i need to export a PDF asap. I am trying to export 33 PSD files in BRIDGE to a PDF like I used to do on my other computer with bridge.

Let's start with the general things.
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

ICal Crashes when clicking "calendar" button to show available calendars

After doing the Lion upgrade I've troupbe with iCal. iCal just opens fine - but when trying to access "calendar" button it shows no reaction at all. In some cases a popout callout appears which is empty (and does not show one single calendar out of my existing 10). If I repeat clicking the button iCal crashes.
Any help is highly appreciated.

BusyCal is not at the root cause - it has s.th to do with the user account. As described in an other post you can fix it by deleting the prefs of iCal:
https://discussions.apple.com/message/15709996#15709996
When it comes to BusyCal there is only one thing with Lion that might be unexpected. Lion fires off iCal each time iCal receives a Push from Mobile Me. In practice you may add an event to BusyCal and iCal will be started immediately. Same for notification. The only way to get rid of this is to change iCal update interval from push to s.th. different. Unfortunately Apple limited Mobile Me Push to iCal only. Other Apps have no access to..
Almi

It says my security answers are wrong, so I guess I need to reset them, it says to click the rescue email button that shows up under the questions, there is no button that shows up.

It says my security answers are wrong, so I guess I need to reset them, it says to click the rescue email button that shows up under the questions, there is no button that shows up.

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(96912)

HT1904 I cannot access iTunes on my iPad. When I click the iTunes button, it shows terms and conditions and when I click the terms and conditions link, it takes me to the Internet and that is it. Kindly help.

I cannot access iTunes on my iPad. When I click the iTunes button, it shows terms and conditions and when I click the terms and conditions link, it takes me to the Internet and that is it. Kindly help.

If you are just seeing the Terms and Conditions link in the Downloads tab then that just means that there aren't any downloads waiting. If you want to browser the store then can are you not able to tap on the other tabs at the bottom of the app ?
If you are looking for your downloaded and synced content then they won't be in the iTunes app (that is just the store) - your music, audiobooks and audio podcasts will be in the Music app and your films and tv shows in the Videos app.

I found a solution!! so go into your settings - where it says "use side switch to:" click mute instead of lock rotation. Seems that somehow it was locked on mute (eventhough my buttons were showing me turning volume up and down) now its all working perfec

i found a solution!! so go into your settings - where it says "use side switch to:" click mute instead of lock rotation. Seems that somehow it was locked on mute (eventhough my buttons were showing me turning volume up and down) now its all working perfect!!!
THIS WORKED FOR ME> IT WORKED I MADE A HOME HD VIDEO AND IT CAME OUT GREAT AND PLAYS ON SPEAKER USING THIS SOLUTION> VIDEO IS CRISP AND CLEAN< AS WELL

WORKED LIKE A CHARM THANKS

Windows 8.1 Enterprise Evaluation- Strange behaviour of network adapter

Hello there are discussions and questions around this community about network adapter dropping connection while system is running. But I have found unique problem with my network adapter driver.
I have tried to state my problem as clearly as possible. Please ask if any detail is required.
My network status shows no access on following occasions:
1. On alternate system wakeups.
eg:
a. System boots up
Internet accessible
no problem
b. I put system to sleep(first time) and wake it up
No access to internet !!!
When I check in network and sharing center not even adapter shows in disabled status.(See video from the link given below).
c. Without restarting system or without installing network adapter again, I put system to sleep again and wake it up (2nd time).
Internet accessible
d. I put system to sleep for (3rd time) and wakes it up.
No access to internet!!
If I put system to sleep again and wake it up definitly I get network access.
2. If I switch off the modem before windows shutdown completely or in the process of shutdown, next time when I boot system, even though the modem is switched on before booting the system, No internet access tooltip will be shown on network
sysbol.
Another strange behaviour is on no internet access status, I start installing adapter, and it loads required files and prompt me to click "next" and "click" install.
But the thing is before I go to "next" button, I will get network access as shown in this link
http://youtu.be/sPlXVEiYBeo. Ignore virtualbox adapter. Same behaviour was there when there is no vbox adapter. Same was happening in Windows 8 Pro, but not in windows 7, so that there is no H/W problem I think.
Any idea on how to fix this or any alternate solution ?

Hi,
Firstly, access your network adapter official website to get the proper driver applied to your system.
Then going to Control Panel > Device Manager, right click your adapter > Properties. Under the Power Management tab, make sure "Allow the computer to turn off this device to save power" checkbox unchecked.
If it still persists, try to disable "fast startup" as below steps:
1.In Control Panel, open the Power Options item.
2.Click the Choose what the power buttons do link.
3.Clear the Turn on fast startup (recommended) check box.
4.Click Save Settings.
Karen Hu
TechNet Community Support

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Click button to 'show' strange behaviour

Similar Messages

Maybe you are looking for