Sample Client ABAP Proxy Program - PI 7.1

I created Proxy. I need to call in a Report Program. I am using PI 7.1
Can anyone send me a sample Client ABAP Proxy program to use with PI 7.1

Hi,
>>>Can anyone send me a sample Client ABAP Proxy program to use with PI 7.1
it's exactly the same as for 7.0 and there are blogs that show such sample reports on SDN
just do a little search and I'm sure you can find it
Regards,
Michal Krawczyk

Similar Messages

7.1 Client ABAP proxy code sample (outbound)

Hi guys,
has somebody implemented new 7.0(7.1) abap proxies using ws runtime?
Could you please post some sample code of client abap proxy?
The 3. proxies were quite easy, but I'm a little bit confused in 7.0 and it's ws-rm.
Thanks a lot, Olian

Create a client proxy (for eg. the name would be like ZCO_MI_EMP_OUT_SYNC).
Create a report program for the client proxy.
report yh_proxyclient.
* tables: ZEMP_DTLS_COPY.
   data: input type zmt_emp_tar1 .
   data: output type zmt_emp_src1 .
   data: client type ref to zco_mi_emp_out_sync .
output-mt_emp_src-dept_id = 'SAP EP'.
data wa_emp type zdt_emp_tar_employee.
data wa_empinsert type zemp_dtls_copy. "ZDT_EMP_TAR_EMPLOYEE.
try.
    create object client
* EXPORTING
*    logical_port_name =
catch cx_ai_system_fault .
endtry.
try.
call method client->execute_synchronous
exporting
    output = output
importing
    input = input
catch cx_ai_system_fault .
catch cx_ai_application_fault .
endtry.
loop at input-mt_emp_tar-employee into wa_emp.
write: / wa_emp-emp_id, wa_emp-dept_id, wa_emp-emp_name, wa_emp-emp_address.
endloop.
commit work.
endmethod
the above code is taken fron this wiki (step by step guide using an example)
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/abapClientProxytoABAPServerProxy+Scenario]

Error while executing sender ABAP proxy program in ECC

Hi,
We have lot of proxy to file scenarios, most of them are working fine. I am having issue with 2 interfaces, when I execute sender ABAP proxy program, we are getting following errors in ECC:
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSING">GENERAL</SAP:Code>
<SAP:Stack>com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=ED1CLNT290;TS=;AN=CustTrPowersellS_Out;ANS=urn:maines-net:OTC_079E:PowersellCustomerTerms; at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:237) at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:167) at com.sap.aii.af.service.cpa.InboundRuntimeLookup.<init>(InboundRuntimeLookup.java:88) at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBinding(AbstractLookupManager.java:519) at com.sap.aii.adapter.soap.web.MessageServlet.getBinding(MessageServlet.java:875) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:439) at etc etc
Configuration should be fine because many scenarios are working. Can you please help me where could be the error?
Let me know if you need more info.
Regards,
N@v!n

Hi Naveen,
We saw your solution about this issue. We are also facing same issue. I wanted to know where we have to update scenario as simple scenario or integrated scenario.
And could you please tel me what is the main diff between in these two.
As we are are using PI 7.31 java stack so for this version what we have to use.
Thanks,
Shivdeep Kumar

What is package structure for Client ABAP Proxy?

1. What is the package structure need to be followed for creating abap client proxy.
2. I read some where in the form, it need to be 4 levels. Why is it?
Thank you
Ganges Leaves

Hi
U hav to create a 4 level package structure for client ABAP proxy.
U can create ur on packages
1st level-structure package.
2nd level-main package.
3rd and 4th level-sub packages.
To the 4th level only u hav to create proxy.
The classes and code wil be automatically generated at the time of proxy creation.
I think the 4 level structure bcz while in r/3 everythin in integration builder like software component version and all wil be takin as different levels.
Also u can go through the weblogs in the above replies u got.
Regards
Victoria.

Dynamic Configuration from Client ABAP Proxy

Hello Experts,
Is it possible somehow to set Dynamic Configuration values to Message Header when calling Client ABAP Proxy from SAP system?
Best Regards

I managed to get the dynamic header configuration at least with inbound proxies:
    DATA:
        server_context TYPE REF TO if_ws_server_context,
        proxy_framework TYPE REF TO if_proxy_framework,
        internal_protocol TYPE REF TO if_wsprotocol_internal,
        lo_inb_pxy TYPE REF TO cl_xms_inbound_proxy_plsrv,
        lo_dyn_header TYPE REF TO if_xms_msghdr30_dynamic.
      server_context = cl_proxy_access=>get_server_context( ).
      internal_protocol ?= server_context->get_protocol( 'INTERNAL' ).
      lo_inb_pxy ?= internal_protocol->get_framework( ).
      lo_dyn_header ?= lo_inb_pxy->xmb_message->get_dynamic_header( ).

Client ABAP Proxy : how to know which program is calling that service interface proxy

Hi All,
I have prepared some client proxy in ECC to communicate with PI.
But, if I am not wrong, unlike server proxy which is written directly in the class Provider class in SPROXT transaction, in client proxy we write abap code to trigger proxy in SE38 .
My question is : If I am in SPROXY and looking at any outbound SI, of which proxy is already generated, then how can in SE38 can I find which program is triggering that interface or proxy?

Hi,
check below thread for calling client proxy
ECC outbound abap proxy (client) - Get ECC messageID from Protocol
Regards,

Client ABAP Proxy

Hi All,
Good afternoon. I have one requirement to work on to work on FILE->XI---->RFC(synch) scenario using BPM. I am new into BPM. Any body have the step-by-step documentaion, please send me ASAP.
I am very thankful to you in advance.
Thanks & Regards,
Nagarjuna.

Hi,
Ur subject is about Proxy and in thread ur asking about File to RFC,
Check this link.
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
- File to RFC
About abap proxy.
ABAP Proxy
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
ABAP CLIENT PROXY
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP SERVER PROXY
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
To test a connection - /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Client Proxy - /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Server Proxy - /people/siva.maranani/blog/2005/04/03/abap-server-proxies
Some links on BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
/people/prasadbabu.nemalikanti3/blog/2006/03/10/bpmsingle-sender-and-multiple-receivers-based-on-synchronous-exchangeswitch-part-1
/people/daniel.graversen/blog/2006/09/07/using-a-bpm-to-collect-messages-for-a-set-interval-of-time
Regards,
Phani
Reward points if Helpful
Edited by: phani kumar on Feb 25, 2008 11:44 AM

Client ABAP proxy error handling. Please help!

Hi Experts,
   I have following scenario:
   SAP ECC (ABAP Client Proxy) -> PI(XI)-->(SOAP) Third party web service System
   This is Asynchronous.
   What will happen when ABAP client Proxy in ECC sends data to PI but PI is down?
   Will the message be queued in ECC? Can the queued message be processed automatically when PI is UP later?
   Please help.
Thanks & Regards
Gopal

Hello Gopal,
Correct, it should be an automatic entry into the queue!
refer below for a detailed understanding!
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies     XI: Reliable Messaging u2013 EOIO in ABAP Proxies
/people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy     Monitoring for Processed XML messages in ABAP Proxy
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]     Weblog to send Response from RFC to File in Asyn Mode Using Proxy
/people/michal.krawczyk2/blog/2009/06/20/pixi-abap-proxies-say-goodbye-to-executeasynchronous-method     PI/XI: ABAP Proxies say goodbye to Execute_Asynchronous method
/people/krishnakumar.ramamoorthy3/blog/2008/11/02/error-handling-framework-for-abap-proxies--part-1     Error handling framework for ABAP proxies - Part 1
/people/krishnakumar.ramamoorthy3/blog/2008/12/19/error-handling-framework-for-abap-proxies--part-2     Error handling framework for ABAP proxies - Part 2
Regards,
Jilan

Outbound Client ABAP Proxy Timeout Error

Hello everybody we have the next scenario:
R/3 Client Synchronous ABAP Proxy->XI-> Synchronous RFC
and we are having problems cause the Sender R/3 is not waiting for the RFC in the Receiver system to process so XI is in log status fot this messages, is there a parameter to increase the time for R/3 Sender to wait for the Call method sentence to complete succesfully??????, thanks in advance.
Regards,
Raul Alvarado

Hi,
do changes as below
In SXMB_ADM
go to Configure Integration server
in change specific identifiers Set Runtime parameter: HTTP_TIMEOUT and then restart XI server, changes will be updated.
Regards,
Sukarna.

Reg. Client(ABAP) Proxy to JDBC scenario

Hi All,
I am working on a scenario of Proxy to JDBC. The scenario goes like this.....
SAP is the sender and I need to fetch data from the database table at the R/3 end and update in the legacy system at the receiver end .
Can anybody guide me apart from PI configuration, the settings need to be done at the R/3 end in the transaction sproxy i.e. the ABAP class and objects. Also let me know if I need to trigger the interface weekly once, is it possible to trigger it automatically by using ABAP class and objects else I need to write an ABAP program in order to trigger the interface.
Thanks for understanding in advance.
Regards,
Neethu Chordia

Hi,
Can anybody guide me apart from PI configuration, the settings need to be done at the R/3 end in the transaction sproxy -
As Raj suggested please search on SDN, you will find lot of links on this.
Also let me know if I need to trigger the interface weekly once, is it possible to trigger it automatically by using ABAP class and objects else I need to write an ABAP program in order to trigger the interface. -
>For this you need to write Abap class program and override method "Execute asynchronous" this will send the SAP R3 data to XI and then you have to configure job on R3 to run this program periodically as per your requirement.
Divyesh Vasani

Abap proxy program generation

SAP ECC will be used as the tool for the processing of all invoices;therefore this interface is required to identify and extract all third party fees invoices, and use the data to update the corresponding customer agreements in the existing Asset Finance mainframe system.
Proxy program is scheduled end of the day to generate an XML file for all the third party fees invoices processed in ECC for that business day.
This XML file is transferred to SAP NetWeaver PI using data push from ECC.
now i am very new to this proxy area!!can u plss let me know how do we approach this

Hi,
Only one program could be sufficient to call the Proxy 4 times for different files. In Outbound Program you need to call the Execute_Synchronous method. The no of times you will call it he no of Porxy callls can be possible. It have internal commit statement.
Thanks
Swarup

Client ABAP proxy - XI login

Hi,
I have successfully tested an ABAP client proxy by executing an ABAP report. However when I execute the report, XI login credentials are asked for.
How can I avoid this, so that ABAP developer need not know XI login ? Is there any setting to be done ?
Regards,

We have also been having the same problem it sounds like you had.
When we do a function module test, it works fine set to use Exchange Infrastructure in LPCONFIG, but we always get prompted for an ID and password.
As you mentioned, when we change LPCONFIG to use Web Service Infrastructure and our Call Parameters to use the HTTP Destination with path suffix /sap/xi/engine?type=entry we now get an error 'Soapfaultcode:4 Error during conversion of XI message' and nothing seems to get to XI.
Is this something you ran into or know something about for fixing this issue?
Any ideas of where to start looking at this?
Thanks,
Jake

Client abap proxy with EOIO

Hi,,,
does anyone guide me with abap sample code using EOIO?
thanks
dennis
ogawa Dennis

HI,
It is performance problem, if it is large database,
See the below links
/people/sap.user72/blog/2005/05/02/useful-sap-notes-for-xi
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
Regards
Chilla

ABAP Proxy HTTP response contains status code 401

We have a client ABAP proxy running in a program successfully in our development system. Today I transported this to our Test system. When I tested, there were no messages in the adapter engine pipeline.
One of my colleagues discovered that when running SXMB_MONI on the Application system (_not_ the XI system), the XML queue there shows the message with an error, the error being:
HTTP response contains status code 401 with the description Unauthorized
I have looked at quite a few posts here with this error; the PIAPPLUSER is not locked, Integration engine is configured the same way in both Development and Test, but I cannot figure out why this is happening.
Any assistance more than welcome!
BR,
Tony.

hi,
Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
If the error is in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
May be wrong password for user XIISUSER
May be wrong password for user XIAFUSER
for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Thanks
Swarup

How to catch CONVT_NO_NUMBER runtime error in ABAP Proxy

Hi all,
In our abap proxy program, sometimes the CONVT_NO_NUMBER will happen and cause the program dump and then stuck the whole queue. I noticed that this error cannot be caught by CX_ROOT exception class. So, how can I catch this runtime error and avoid the dump of our program?
Thanks,
YiNing

Hi,
While Executing the proxy,first give \h TC and then execute the proxy then it will automatically got to debugging mode.
I think ur data is worng,if it is wrong then only u will get this type of errors.
Regards,
Phani

Sample Client ABAP Proxy Program - PI 7.1

Similar Messages

Maybe you are looking for