Client Pre-Install Check Script

I recently installed SCCM 2012 in our environment. Most of our computers have the client installed. I was wondering if anyone has written a script to that can be run on a workstation to see if it has all the Pre-reqs for the SCCM client and outputs what
fails.
Manually checking 20% of our computers for each requirement is going to be a daunting task. I was hoping someone else may have already done the script work and could save me a bit of time.
Thanks

Hi
Why would you need to check prerequisites on your wokrstations before installaing the client?
The ConfigMgr 2012 client installation will install all the prerequisites for you - except BITS.
But you only really have to worry about BITS, if you need to install the ConfigMgr 2012 client on Windows XP SP2 64 bit or Windows Server 2003 SP2.
You can find all the details about the ConfigMgr 2012 client here:
http://technet.microsoft.com/en-us/library/gg682042.aspx

Similar Messages

Pre-requisite checker script for EBS R12 and R12.1

hi
is it possible to make a pre-requisite checker script (in perl or shell) for EBS R12 and R12.1 in RHEL5 or sun OS??
can anyone help / guide me to do so??
rgrds

I don't know about EBS R12, but apparently the Oracle Universal Installer can use options to just run the prerequisite checks without having to install the product.
E.g. /runInstaller -prereqChecker or -executeSysPrereqs
There is also a specific OTN forum available for installing E-Business suite:
LCM: 11i Install/Upgrade

Failed pre install check for 11i

Hi, newbie to 11i and am trying to install 11i on my 250GB external HD but failed pre-install checks in 3 areas
1) system utilities check (!)
2) operating system check (!)
3) file space check (x) talked about mount points in error message
Quite frustrating as i had installed the mks and mvs files on my c:\ as instructed. also i was`advised to certain tests thru the cmd prompt by entering these files; link, gnumake and cc. i got responses for link ad gnumake but no respnses for cc.
guys out there, any solutions please
Message was edited by:
user480131

Saw the same post at other place too..
While running rapid install did you give the mount points for Data_top ora_top and Appl_top to correct values
For system utils check for the PATH env variable is it pointing to right place.
For OS check .. I am not sure. (you should have checked the certiifcation matrix for this .. or may be some required patches are missing for this OS)
Hi, newbie to 11i and am trying to install 11i on my
250GB external HD but failed pre-install checks in 3
areas
1) system utilities check (!)
2) operating system check (!)
3) file space check (x) talked about mount points in
error message
Quite frustrating as i had installed the mks and mvs
files on my c:\ as instructed. also i was`advised to
certain tests thru the cmd prompt by entering these
files; link, gnumake and cc. i got responses for link
ad gnumake but no respnses for cc.
guys out there, any solutions please
Message was edited by:
user480131Saw same post at another place too ..

Oracle apps 12i pre install checks fails in cl; command not found

Hi guyz,
Im trying to install 12i on external hard drive (windows xp), I followed the steps from http://forums.oracle.com/forums/thread.jspa?threadID=447193&tstart=60&start=0
The installation fails in
command: cmd.exe /c D:\stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd d:\Tools\MKS\mksnt\bin d:\Tools\MSVC\V98
D:\stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/cygdrive/d/Tools/MKS/mksnt/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
cl: Command not found.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
There are no spaces in MKS tool kit and Visualstudio2005 install dir but still the installation fails.
I tried many combinations installing MKS and VS on c:, installing MKS and VS on d:, installing VC++ express edition but nothing worked. Also i have set the enviromental variable PATH each time i made a change. Still i get the same issue.
Im doing this for a week now, had no luck.
I had a successful installation of 11.5.10 from e delivery but it didn't had the financials modules needed. There is an update for 11.5.10 on edelivery but i was not sure if they had the financials modules in it, so i decided to go for 12i
Can anybody help me with 12i installation or provide me steps how to apply the updates on 11.5.10 if updates have financials in it.
I appreciate any help.

Oracle E-Business Suite R12 Installation on Windows 2003
Re: Oracle E-Business Suite R12 Installation on Windows 2003
If you have a VC98, you are using Visual Studio 6. You need to be using Visual Studio 8, and set the Visual Studio directory in Rapidwiz to d:\Tools\MSVS\VC.
The Vision installation of Oracle Applications has had Oracle Financials implemented for the fictitious company Vision Corporation from the beginning, 10.7 I believe, but definitely every 11i release has financials plus every other product licensed. Not all the newest products are fully implemented, but they are licensed.

Is there any upgrade checking script for PL upgrade

Dear Experts,
I know there are Pre-upgrade checking script to validate database integrity before an upgrade from 2005 to 2007.
However, is there any such similar scripts for an upgrade from 2007 PL12 to PL13? (Inter PL upgrade) or can I use the same script for the same purpose?
Much Thanks!
Warmest Regards,
Chinho

Hi Gordon,
Thank you for your reply. Is it true that within inter-patch upgrades, there are no database structure change?
I asked this question because sometimes I get "DB is inconsistent" error after upgrade, and I don't know why?
Much Thanks for your Advice thus far!
Warmest Regards,
Chinho

Failing PATH pre-requisite check installing 11g client

Greetings -
I'm trying to install the 32bit oracle 11g database client on Win 7 Professional x64. I'm stuck with this error when the installer gets to the "Perform Prerequisite Checks" step:
Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Details:
- PRVF-3919 : Failed to retrieve value of environment variable "PATH"
- Cause: Environment variable value could not be determined.
- Action: Check user equivalence and whether the user has administrative privileges on the node.
Google tells me this might be related to an excessive PATH environment variable length, so I made multiple repetitions of "clean some crap out and try to install again" with no effect. Currently it is set to:
C:\>path
PATH=C:\Windows\system32;C:\Windows;
And the installer still fails.
I've tried explicitly running the installer via "Run as Administrator" and as a regular user (who is in the Administrators group). No change either way.
Someone on my team suggested making sure the installation target path has no spaces in it. I'm keeping the default path suggested by the installer, which is
D:\app\ladams\product\11.2.0\client_1
where ladams is my Windows user name. I did some experimentation here, changing the install path to things like "D:\oracle" and that hasn't resolved the issue.
Interestingly, if I open the installer log, I can find this line in it near the top:
INFO: PATH has :==>C:\Users\ladams\AppData\Local\Temp\OraInstall2013-01-28_02-19-03PM\jdk\jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;;;.
So it can apparently read the path at some point before the pre-requisite check, although it seems to be doubling up the contents for some reason...
Later on in the log file, I see this:
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
Is there some way to work around this issue, or just skip the prerequisites check entirely? I found something on a blog via google about being able to pass a "-ignoreSysPrereqs" switch to the installer to bypass the check. When I tried that, the installer still performed it's checks, and failed with the same error, so apparently that was bad info...
Any help would be appreciated.

Thanks for the reply.
I did indeed take a look at the client installation instructions here: http://docs.oracle.com/cd/E11882_01/install.112/e24282/toc.htm#BABGCIFF
However, it appears to be out of date, or at least not applicable to my problem. Step 10 refers to an Ignore All button:
"Note: Oracle recommends that you use caution in checking the Ignore All option. If you check this option, then Oracle Universal Installer may not confirm that your system is able to install Oracle Database successfully."
I don't have an ignore all button. At least if there is, it's cleverly disguised. The only option I have after the check fails is "Cancel."
Is there another section of the fine manual I should take a look at?
Edited by: 984635 on Jan 28, 2013 6:09 PM
Edited by: 984635 on Jan 28, 2013 6:17 PM

OS pre-instaled CM12 Client, but it can not automatically find site after joining Domain

Background:
we update sccm 2007 to sccm 2012 r2
For New PC, the OS pre-installed with our image by PC Vendor. The image has sccm 2012 client. So when users get the new pc, we only need to join the domain.
After joining the domain, 2012 client will never automatic locate the site code base on AD.
I do some testing.
Install client in the domain pc with parameter SMSSITECODE=AUTO, the site code can be located
Install client in the workgroup pc firstly, the join the domain. Client will never automatic locate the site code base on AD
But If I click Find Site in the Advanced tab of the Configuration Manager Properties in
the Control Panel. The site code can be located.

I'm going to guess you're running 2007 and 2012 side by side, in which case you need to look at your boundary groups. In 2007 you simply had boundaries, in 2012 if you don't make boundary groups and assign boundaries and site site assignment to said
group nothing will happen.
If you have upgraded your infrastructure completely to 2012 but haven't upgraded all of your clients yet ... what you should be seeing is the opposite: 2007 clients wont check into 2012 unless you enable automatic client upgrade. Then there's
if you have overlapping site codes between the two systems.
Better detail See:
https://technet.microsoft.com/en-us/library/gg682060.aspx
Assignment scenario
Assignment outcome
You have used automatic site assignment and your System Center 2012 Configuration Manager boundaries overlap with Configuration Manager 2007 boundaries.
The client automatically tries to find a System Center 2012 Configuration Manager site.
The client first checks Active Directory Domain Services and if it finds a System Center 2012 Configuration Manager site published, site assignment succeeds. If this is not successful
(for example, the System Center 2012 Configuration Manager sites is not published or the computer is a workgroup client), the client then checks for site information from its assigned management point.
Note
You can assign a management point to the client during client installation by using the Client.msi property SMSMP=<server_name>.
If both these methods fail, site assignment fails and you must manually assign the client.
You have assigned the System Center 2012 Configuration Manager client by using a specific site code rather than automatic site assignment, and mistakenly specified a site code for a Configuration
Manager 2007 site.
Site assignment fails and you must manually reassign the client to a System Center 2012 Configuration Manage

I have tried to upgrade Painter 11 on my iMac running OS X 10.5.8. I keep getting the error message :- : The following install step failed : run pre install script for Corel Painter11 _ SP1 . Contact the software manufacturer for assistance " Help pleas

I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
Does anyone have any suggestions, please ?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Warning while running pre-req checks for installing 11g binaries

I am trying to install 11g binaries on my box for upgrading my production db from 10.2.0.4 to 11.1.0.7. I have dev and Prod running from the same box. I already upgraded my dev instance to 11g and its home is /opt/oracle/product/11.10/dev.
I created another path for production as /opt/oracle/product/11.1.0/prod so that I can install the 11g binaries for production in there. When I run the installer, the pre-req checks gives me two warnings -
Checking PATH environment variable...
Check complete. The overall result of this check is: Failed <<<<
Problem: The installer has detected that the PATH environment variable includes other ORACLE_HOME locations in it.
Recommendation: Restart the installer after removing other ORACLE_HOME locations from PATH environment variable.
========================================================
Checking LD_LIBRARY_PATH environment variable...
Check complete. The overall result of this check is: Failed <<<<
Problem: The installer has detected that environment variable LD_LIBRARY_PATH includes other ORACLE_HOME locations in it.
Recommendation: Restart the installer after removing other ORACLE_HOME locations from LD_LIBRARY_PATH environment variable.
I ran ther pre-req again after unsetting the PATH and HOME variable. But it still gives me a warning on the PATH variable. What should I do to avoid this warning?

If I were you, I would have defined the HOMEs as "/opt/oracle/product/dev/11.1.0" and "/opt/oracle/product/prod/11.1.0" - that would eliminate the errors you are facing. It is still not too late - you can install the prod binaries as "/opt/oracle/product/prod/11.1.0", then later on "clone" the OH from "/opt/oracle/product/11.1.0/dev" to "/opt/oracle/product/dev/11.1.0" and delete the former.
You could also simply clone "/opt/oracle/product/prod/11.1.0" from "/opt/oracle/product/11.1.0/dev" rather than running the the install/patching process all over again.
HTH
Srini

Pre-requisite check for client deletion.

Dear Experts,
We need to delete a client(Customizing client) from our Production system, this client is an additional one apart from our Productive client.
Could anybody please enumerate the pre-requisite checks necessary to carry out before going ahead with deleting the client using SCC5. Any Rfc's to be taken care off, logical systems etc.
Thanks in advance

Hi,
In addition to what Sunny said, Please check the below links as well in case if you would have not gone through them:.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCTS/BCCTS.pdf
http://help.sap.com/saphelp_46c/helpdata/en/2e/d9530294f911d283d40000e829fbbd/content.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCRRR/BCRRRSAA.pdf
Thanks

10gR2 Install Issue: "No pre-requisite checks found in oraparam.ini"

Hello there
I have recently created a virtual machine under VMWare 5 with a base Windows 2000 build on it.
When I try and load the OUI for the 10gR2 install, the command box just tells:
"No pre-requisite checks found in oraparam.ini"
The OUI then proceeds to install the database.
Why am I getting this warnig? The reason I ask is that I can't install the Companion CD becasue of this. The universal installer does not work for CD2!!!
Any help much appreciated
Duncan

"No pre-requisite checks found in oraparam.ini"That is normal. For the operating system you are installing it on, there are no predefined pre-requisite steps that installer needs to verify (like libraries required, versions of components, software tools required etc).

Jumpstart Pre install scripts in perl...

Perl scripts dont execute for jumpstart pre-install, looks like the perl header is ignored and its executes as shell script. Is it possible to use perl in place of shell scripts?
Thanks, P.

hmm, its possible that the script is called as
sh <script>
If so seems to be the case, simply create a shell scripts which calls your perlscript and use the shellscript as your pre-install script.
7/M.

Pre-install scripts

I have a frustration problem. There are three software updates that will not run on my computer due to not having these following pre-install scripts installed:
FlashBackRemovalUpdate
LeopardMigrationAssistant
AppleMobileDeviceSupport (this is for iTunes 10.6.1)
I want to upgrade to Lion, but I can't do that either. I think there was a similar problem when I tried that before.
I think that my wife skipped updates a while back and I suspect this computer missed somthing important in one of them.
I found support for the iTunes, followed it , but that did not fix it.
Thank you

Well, if a certain version of an app was installed & then deleted then SWUPD won't see it's not updated & won't list it.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Error in Pre-install of patch 9239089

we are in Pre-install Tasks of patch 9239089 for windows server 2008.
Executed the envshellPROD_srv-moc environment file then performed the below steps
Usage:
1. Create $ORACLE_HOME/appsutil/admin on the database server.
    copy adgrants_nt.sql (Windows) from this patch directory to
     %ORACLE_HOME%\appsutil\admin.
3. Set the environment to point to ORACLE_HOME on the database server.
4. Use SQL*Plus to run the script:
     Windows:
     C:\> sqlplus /nolog
     SQL> @%ORACLE_HOME%\appsutil\admin\adgrants_nt.sql <APPS schema name>But go the error
SQL> @F:\oracle\PROD\db\tech_st\11.1.0\appsutil\admin\adgrants_nt.sql apps
ERROR:
ORA-01031: insufficient privilegesWhat need to be done to solved the error.
Thanks
Nawneet
Edited by: user13767670 on Jan 24, 2011 11:31 AM

Hi
I check the below link and it mentioned that by
"I removed the connect as sysdba line form the script and it worked.."
adgrants.sql issue
i added the full path
connect sys/manager@prod as sysdba
instead of
connect / as sysdbaand when i ran it it executed ,
E:\oracle\PROD\inst\apps\PROD_srv-moc\admin\scripts>sqlplus /nolog
SQL*Plus: Release 10.1.0.5.0 - Production on Mon Jan 24 13:02:25 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> @F:\oracle\PROD\db\tech_st\11.1.0\appsutil\admin\adgrants_nt.sql apps
Connected.
--- adgrants_nt.sql started at 2011-01-24 13:02:35 ---
Creating PL/SQL profiler objects.
--- profload.sql started at 2011-01-24 13:02:35 ---
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Pr
oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
E:\oracle\PROD\inst\apps\PROD_srv-moc\admin\scripts>Can you tell me if that executed successfully , above is the output
Thanks
Nawneet

Does using Group Policy Preferences to deploy printers require the print driver to be pre-installed?

I'm trying to prepare our school system for Windows 7 (we currently use XP). I would like to use the new Group Policy Preferences method of deploying printers. I pushed out the XP client side extensions through WSUS. In my test environment, I added the shared printer in group policy preferences. My XP machine had the printers show up automatically, but my Windows 7 machine did not. I realized that I had previously connected a printer of the same type to my XP machine before and the drivers were already installed. To test this theory, I manually connected the shared printers to the Windows 7 machine, deleted them, then logged off and back on. Now the printers are showing up from group policy. My question is does using group policy preferences to deploy printers require the print driver to be pre-installed? If not, then what am I doing wrong? If so, is there a way to work around this? Thanks for your help.
EDIT: To clarify, I am using the share method in GPP. This is the error message I get in the event log:
The user 'PRINTERNAME' preference item in the 'win7 printer test {946461A1-27F8-406F-A0B3-0A1A05AF34F6}' Group Policy object did not apply because it failed with error code '0x80070bcb The specified printer driver was not found on the system and needs to be downloaded.' This error was suppressed.

This link have a description of resolution:
http://technet.microsoft.com/en-us/library/cc725938.aspx
Open the GPMC.
Open the GPO where the printer connections are deployed, and navigate to Computer Configuration, Policies, Administrative Templates, Control
Panel, and thenPrinters.
Note
The Point and Print Restrictions setting can also be found under User Configuration\Policies\Administrative Templates\Control Panel\Printers.
This policy is ignored by Windows 7 and Windows Server 2008 R2, but is enforced by earlier editions of Windows including Windows XP with SP1, Windows Server 2003 with SP1, and Windows Server 2008. We recommend that you change
this policy setting in both locations so that all down-level clients have a consistent experience.
Right-click Point and Print Restrictions, and then click Properties.
Click Enabled.
Clear the following check boxes:
Users can only point and print to these servers
Users can only point and print to machines in their forest
In the When installing drivers for a new connection box, select Do not show warning or elevation prompt.
Scroll down, and in the When updating drivers for an existing connection box, select Show warning only.
Click OK.

Client Pre-Install Check Script

Similar Messages

Maybe you are looking for