Clients not showing up in maps

I have a couple of floors plans loaded in Prime but my clients are not showing up on the maps. When I click on the floor view, I can see my access points but no clients are showing up.
Any ideas

seriously, am i the only one having these problems?
any suggestions on how i might fix them?

Similar Messages

Why does mail sent using the MacOSX mail client not show up in my sent folder when I access my Gmail account in a browser?

I've recently started using my first Mac, and I hooked my work email (Forwarded to Google Mail) and my personal email (Gmail) into the MacOSX mail client. Everything seemed to be going smoothly, until I noticed that sent mail from my work email through the MacOSX Mail client is not showing up in my sent box on any other clients. Sent mail does show up in my personal email in Gmail, though.
Can anyone help me understand why mail sent from the MacOSX Mail client doesn't end up in the sent folder of my work Gmail account? I suspect it has something to do with the forwarding-to-Google process -- a sort of "too many cooks in the kitchen" situation. Has anyone heard of this problem before? What should I try?

I've been noticing that too. Just told me there were 6 outgoing messages, even though I did not create any new messages.
One hypothesis is that it's generating those messages when a rule moves an email from one folder to another.
Can someone at Apple confirm this?

-1 email? contacts not showing up in Maps?

recently i've been having some issues with the email and map features.
one of my gmail accounts constantly has a "-1" email hanging around. it will show up as "-1" on my front screen and will subtract one email from my new email (ex: if i have 4 new messages in this account, it will show on the accounts screen that i only have 3).
also, lately contacts will not show up when i'm using maps but they still show up in my contacts list. say i'm looking for directions to a friend's house and type in the first couple letters of their name. names from my contact list will show, but no address, even if i press the name on the pop-up list. also, if i press the "bookmark" button in the address field and then select a contact, it still won't bring up an address for that contact.
this has only started happening since i upgraded to 1.1.3.
any ideas? i've tried restarting the iphone several times but it changes nothing. i'll probably try resetting everything, but i still don't know if this will fix anything if it's software related.

seriously, am i the only one having these problems?
any suggestions on how i might fix them?

Clients not showing up

Hello,
I am new to Flash Media Server. I have FMS v2 installed and
running. I have a flash application that posts some data (tracking
information) to the FMS Server whenever a user tries to play
anything using the flash application. The flash app sends data on
port 80.
This used to work till recently when we did a server move and
after that it stopped working. I dont see any errors anywhere. Log
files, event viewer, everything is clean. The FMS server is running
on a specific IP and the ports 80, 1111 and 1935 are opened up.
I dont see clients in the FMS admin console. Does that mean
the client connection is getting rejected? Or does that mean that
the flash application is not even connecting to the Flash Media
Server? How do I troubleshoot the connection issue? I am kind of
lost because, there are no errors on the server side but the
clients do not show up!
Please advise.
Thanks,
Satya

Since the issue is new since the server move, my first guess
would be that either something is getting in the way of port 80
(assuming all client connections are failing), or you're not
allowing clients to use RTMPT when needed (assuming only some
connections are failing).
If the URL argument in your client side
NetConnection.connect constructor explicitly defines port 80, the
flashplayer will try only port 80 using the protocol specified in
the URL string. If you do not define the port, and you define the
protocol as RTMP, the flashplayer will automatically try various
combination of ports and protocols if RTMP:1935 fails.
About this new server, is it Windows or Linux. If it's
windows, and you're running IIS 6 on it, did you unbind IIS from
the IP FMS is running binding to? I've found that in most cases,
IIS usually grabs port 80 (on all IP's) before FMS does. A quick
run of Netstat should tell you which service is bound to port 80 on
the FMS ip.

My own locations not showing up on map

Hi,
I'm creating my own locations for geo-tagging when iPhoto09 does not offer a suggestion. This is working fine and I can add the newly created location to an event.
However, when I start locations and get the map overview, only the locations that were automatically offfered by iPhoto show up on the map. My own locations do not show up with a pin.
In the konsole.log I see the following entries:
28.01.09 10:49:09 iPhoto[1162] Couldn't connect to remote host
28.01.09 10:49:09 iPhoto[1162] Failed to connect to 'place.apple.pushpin.com:80'
28.01.09 10:50:24 iPhoto[1162] Couldn't connect to remote host
28.01.09 10:50:24 iPhoto[1162] Failed to connect to 'place.apple.pushpin.com:80'
Curious, as all other features work just fine.
Just the showing of my own locations seem to be broken.
I am in corporate network with a local proxy running on my Mac that handles the communication with the corporate proxies. When I type the URL in my Safari, I get a connection just fine.
Seems like only for the mapping feature iPhoto tries to bypass the proxies and does not get a connection.
Can anybody help or confirm my suspicion?
Thanks a lot,
Carsten

However, when I start locations and get the map overview, only the locations that were automatically offfered by iPhoto show up on the map. My own locations do not show up with a pin... Can anybody help or confirm my suspicion?
Can only confirm that on a dedicated, non-network system I am getting "pin" locations as long as at least one photo is associated with a pin. Pins without associated photos do not show up on the "Places" initialization map but do still show up on the "Manage My Places" map.

Netinstall clients not showing but imaging okay

I have Mavericks server 3.1.2 and for NetInstall the images send to the clients and the image is working but the connected clients are not showing up in the connections tab....is there a service or port that needs to be started or opened up or turned on?

They will only appear in that tab during the (relatively) brief time that they are connected to the server. That would be the first couple of minutes when they are "preparing" the installation. After that, they reboot and perform the actual installation. During that time they aren't connected and will not show up on the server.

All devices listed as wireless clients not showing up.

I have an airport extreme (newest version) I have my apple tv, computer and ipad showing up listed as wireless clients, however my iphone does not show up. It is connected to my network. I have tested with another iphone (same version 4S and same iOS) it shows up but not Mine.
Do u know why it is not showing up?

remove power cord from the PSU and >>Clear CMOS Guide<<
if the wifi card is removable, try to reseat it
also install latest killer drivers from:
http://www.msi.com/support/mb/X99S-GAMING-9-ACK.html#down-driver&Win8.1 64
[try older version as well if needs]

CUPC client not showing softphone but showing up under presence viewer on CUP server

Hello,
Having a strange issue where the presence client wont show the softphone configured for them but when you go to the presence server and use the presence viewer to see what the client should be seeing, it shows up there. From that it looks like the UPC phone in call manager is being seen ok by the CUPS server but for some reason not by the client. Tried fully shutting down the client and also restarting the re-sync service on CUPS but no such luck.
thanks

Please check if TFTP is configured on CUPS (CUPS > Application > Settings)
Also trying pulling the softphone manually from CUPC client workstation
Command (from windows command prompt)
tftp -i GET .cnf.xml
If this doesn't successfully downloads the file there is firewall issue in the network or on the workstation over tftp.
(Note: Windows 7 doesn't have tftp client installed by default, need to install it from Control Panel > Programs and Features > Add/Remove Windows Feature)

Outlook Client not showing all emails

Hi,
We have signed up for emails on domains.live.com for the domain name kamtress.com
We setup Outlook clients in our office using IMAP.
But the outlook client does not show all emails and also shows lots of copies of sent emails while we would have sent only one.
Could you please help us out with this issue as to how this can be rectified?
We use Outlook 2013 on Windows 7.
Thank you.

Hi,
First of all, please make sure your Outlook is fully patched.
Then, please log on your web mail and check if you can see all your emails. If so, please open your Outlook, go to File > Info > Account Settings > Account Settings > Highlight your Imap account and click
Change > in the Change Account wizard, check how you set the 'Mail to keep offline' slider. Change it to
All and then check if you can see all your emails in Outlook now.
If problem persists, please try to create a new mail profile in Control Panel and set up your IMAP account in the new profile to check if it helps. To configure an email account via IMAP, please refer:
http://support.microsoft.com/kb/829918/en-us
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support

SBO client not showing DBs

Hi
For one of my customer i have installed MS SQL 2012 and SAP 9.0 PL 8. (Server os is 2008 R2 and 2012 for one more client)
In window vista, 7, 8 and window 2003, 2008 r2 servers, SBO client is showing the license server and DBs.
In window xp system it not showing, in license server it is sowing digit "10"
Can you suggest me how to fix this.
I have tried the following.
1. Server local ip in hosts
2. Windows & antivirus firewall turned off in both PC and server.
Thanks in Advance
Srinivas.

Hi,
Windows XP does not 9.0 version. Windows 7 or 8 required for 9.0 version.
Check this guide for more information. Note that this is not latest version.
http://rels.co.il/wp-content/uploads/2013/02/System-and-Hardware-Requirements-Guide-for-SAP-Business-One-8-8-and-higher.…
Thanks & Regards,
Nagarajan

Outlook 2013 client not showing number of unread items

Hi there!
Exchange 2010 SP3 with latest CU.
Outlook 2013 with latest Windows update.
Lately (let's say about 1-3 months) we see that in Outlook 2013 client some folder are not showing the number of unread items.
This thing stopps working randomly and yes if we look under folder properties, option: SHOW NUMBER OF UNREAD ITEMS is enabled.
We believe it's some kind of bug.
Anyone else experiencing the same thing and how to solve it?
with best regards,
bostjanc

Hi,
Does this issue happen to multiple users?
When you view the folder that has unread emails, is there any unread email with the blue "unread" line before the unread email?
Please first try to start Outlook with /cleanviews switch to check if this issue is caused by corrupt view. To do this, press Windows key + R to open the Run command, type
outlook.exe /cleanviews and press Enter.
Besides, if this issue happens again, you can try to close Outlook and then open it in safe mode (hold CTRL key and double click Outlook icon to open it) to check the result.
Hope this helps.
Regards,,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

MBAM 2.5 Client not show Turn On Bitlocker

Hello everybody,
I would like to know why the MBAM Applet not show the Turn on Bitlocker.
I'm logged with a administrator account and same so not appear the button.
Look it below:
Robson Hasselhoff - Follow me @Robk9e

Yes that is the problem. in both cases your TPM is already owned it should be at "initialize the TPM prompt" TPM is getting initialized and thus you are not getting the prompt. Can you do the following o a power shell. we may need to set physical
presence as well, as mentioned here: http://msdn.microsoft.com/en-us/library/windows/desktop/aa376478(v=vs.85).aspx
a. $tpm=get-wmiobject -class Win32_Tpm -namespace root\cimv2\security\microsofttpm
b. $tpm.DisableAutoProvisioning()
c. $tpm. SetPhysicalPresenceRequest(XX)
d. Restart the machine and if BIOS prompts for accepting the change, please accept the changes made.
where XX depends on specific TPM, 14 and 22 are the ones that work most of the times.
Mayank Sharma Support Engineer at Microsoft working in Enterprise Platform Support.

CRM 2011 Outlook Client not showing all columns in Opportunity Views

Versions:
CRM: 2011 On-Premise - 5.0.9688.1533
Outlook: 2010 Professional - 14.0.6122.5000 32bit
CRM Client for Outlook: 5.0.9690.1992
Basic Problem
The Outlook Client views that show up in Opportunities do not have all the columns that are in the view.
Some of the views do, but not all of them.
Example:
View Name: Won Opportunities
Columns in view: Created on, Location, Quote Type, Scope of Work, Quote Number, Booked Sale Date.....8 other
columns (many custom columns)
Columns in View in Outlook: Icon, Quote Number, Categories, Flag....thats all.
Other Notes
This only happens in the Opportunity section of the Outlook Client.
This does not happen in advanced find in Outlook or anywhere in the web client. This does not happen for any other entity.
This happens on all of our users Outlook clients.
I have tried recreating the view.
No error messages are recording in any logs that I can find.
Any ideas on why this is happening or how to fix it?
Thank you
Paul

1. Are you sure this is a System View and not a User Defined View? Can you take a screenshot of all the availalbe Outlook views when you click on the little down arrow to add a new view? Yes. See the screen shot at the bottom. It is a public
view.
2. What happens when you close the view and add it back? same results.
3. What happens when you restart Outlook? I ask because if you customized your System Views, those are only persistent for a given session. If your restart Outlook, then it should reset the View. we have tried that. and uninstalled Outlook client
and reinstalled. And uninstalled Outlook and reinstalled. Same results. The only view that works for opportunities is the Default Custom View. The strange thing is that the filters are working just fine. just not the columns.
4. A workaround - have you tried creating a new System View similar to the one you want? Yes. same results

Pushpins not showing in preview and hence not showing on embedded map

have imported KLM file OK after finding import only works in internet explorer but when i click share and look at preview the pushpins aren't showing and the same when i embed into website just the base map .
Have i missed a process ?

Have you specified a custom icon in the KML styles? If so, is it a full URL path of a relative path. If it is a relative path then it will be looking on the Bing servers for the image where it won't be and thus will not render.
Also, collections cannot be used outside of the Bing Maps consumer site in embedded maps.
http://rbrundritt.wordpress.com

LMS 2.6 VG202, 202, and 224 Not showing in Topology Map!

Hello,
Would there be a reason for VG202, 204, and 224 not to show in the topology map?
I can see the devices under Device Management in RME, also can see them unde the Topology Services window, however, when the topology map comes up, I cannot see the devices in there, when I try to find them they are not listed, andn ot listed in the Device type within the VTP Domain Topology window that shows a map of the devices on our domain neither!
Do I need to download a MIB for these devices for the topology map to recognise them?
PS: The following is a list of Software Spec I have installed on our network:
LMS 2.6
CiscoWork Common Services 3.0.6
Campus Manager 4.0.13
CiscoView 6.1.5
Device Fault Manager 2.0.13
Integration Utility 1.6.0
Resource Manager Essentials 4.0.6
Many thanks,

Dear Joseph,
Apologies for my late reply, I was away on Holiday.
Checking on our topology map the VG202 and 204 show as a green box with a question mark on it.
I connected to the switch that they are attached to and I can see the devices when I run the sh cdp nei command.
Any advise please?

Clients not showing up in maps

Similar Messages

Maybe you are looking for