CLJ3600DN Printing upside down after new driver

So I did what HP said and installed a new driver for my Color LaserJet 3600DN. Now it prints unside down. Letterhead must go in upside down now. Also, when printing on both sides, only prints one way, flip page end to end. Anyone have any ideas?

It sounds as though the option for mirroring is on. Check your printer settings and make sure that mirroring is off.
Hope this helps.
Syd

Similar Messages

Printing upside down

Hi guys. I've got an HP LaserJet 600 M603. It has started printing pages with the data upside down. Instead of picking the page up from the tray after printing, and the start of the page being at the top, it's placing the start of the page and information at the bottom, upside-down.
When I do a factory reset, it will correct the issue for a time, but it then reverts back within an hour or so.
I researched and found some information regarding a firmware upgrade for a different model printer that stated is was the PJL Density command that was causing the data on the page to print upside-down and it was the fix for it.
Not sure if an upgrade to the firmware is what I need, nor do I know how to peform this. Any advice?
Firmware Revision: 2200643_228341
Firmware Date Code: 20120623
Model: CE996A
This question was solved.
View Solution.

There is a firmware update from 31 July 2014, version 2302963_436082 available for download from HP here. Be sure to read the "Readme" file in the file here for installation instructions. The installation instructions are near the end, starting about page 29. It does appear some of the updates involved fixes for mirrored or inverted text.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Quicken 2007 checks print "upside-down"

I have been using Quicken 2007 for Mac (ver 16.1.2) to print my checks, successfully, for many years with a Brother printer. Suddenly, out of the blue, my partial checks starting printing upside down (i.e., rotated 180 degress). I have looked at all the print settings and preferences and everything is correct. Something clearly has changed, maybe from either an OS X or printer driver update, but I can't figure it out.
I deleted the printer and reinstalled the Brother CUPS driver from the Brother website, and also reinstalled the Quicken app, but none of that fixed the problem.
I spoke to both Brother and Quicken technical support, and they each pointed the finger at the other. In the meantime, the checks won't print.

Well, I installed Rosetta and downloaded the latest driver for the printer. Interestingly, Quicken 2007's Get Info box doesn't have the checkbox to open in Rosetta. Checks still print upside down.
I found a workaround, though: I "print" the check to Preview, then rotate it 180 degrees and print to the printer. I can live with that, but I hope someday to figure out what happened...
I'm going to leave this question unanswered for now, but thanks for the help!

Duplex printing upside down !

Hi, For some reason duplex printing to a Xerox Apeosport C5540 has just started printing the second page upside down.
Changing the binding selection (long side or short side) has no affect.
Anyone have similar experience ?
I recently installed an HP J6480 printer driver - which is the only thing I can think of that has changed recently, other than OS X updates...
Thanks

What printer are you using? We have a Xerox 252 with a Fiery server and we were having problems getting consistent duplexing. We eventually discovered the setting that we were missing, but it wouldn't do me any good to tell you if you don't have that type of printer. Landscape printing usually requires a top/bottom duplex setting, which can also be called "flip on short edge" or "head to foot." This is set within the printer settings--usually under layout or printer features.
I have noticed with ID CS3 that even landscape pages are sometimes considered portrait when it comes to duplex orientation, so if your pages are still printing upside down, try changing the settings to the opposite (i.e. top/top, flip long edge, or head to head). This is only true in ID, all other apps should orient landscape with the other settings. This was exactly the problem we were having with our Xerox and ID. We could print duplex using the standard landscape settings from Acrobat but from ID, the results were unpredictable. We finally found in the printer settings where we could force the page to be oriented either portrait or landscape and that fixes the problem.

Artboard 2 of 2 prints upside down - Windows 7

I use Windows 7 - when printing two artboards meant to be two sides on one sheet, the second prints upside down.
When printing pdfs for distribution and print-out, I am forced to turn the second artboard upside down, so that it prints normally.
I have seen posts on the forum stating that this is not an Illustrator issue. I'm sorry, but it is.
A thread about the matter saw the person with the problem 'resolve' it by having to tweak the print dialog EVERY time they print.
This just isn't good enough. In certain quarters this would be called a bug.
If the second of two artboards CAN indeed be made to print normally in Windows, then the feature making this possible is obviously VERY difficult to locate and the interface must be made more intuitive with respect to this issue.
I have experienced the issue on multiple machines and printers, so it isn't specific to one machine / printer.
Thanks

If it was a bug, everyone would have the same problem. I run Illustrator in Windows every day, and I've never encountered it.
I've no desire to argue over it, but I'll take one stab here at convincing you it is indeed a simple case of the default setting in the printer diver with respect to the flip direction of 2-sided printing. If you, (and the person with the same problem in that other thread), would change the printer defaults to flip or "tumble" the other way, it would solve the problem, and there would be no need to address it every time you print. Have you tried saving as PDF and printing from Acrobat?

Using brochure template, the second side prints upside down. How to fix?

When using the brochure template how does one correct the back page from printing upside down?

Hi,
From the application used to print open the printer dialog, then click on ettings or Preferences to access to Printig Preferences dialog.
Within the Layout tab change the Print on both sides option.
For a portrait oriented document select Flip on Long Edge, for a Landscape one select Flip on Short Edge, then it will print as expected.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Picture turns upside down after being taken

What could cause my phone to turn my pictures upside down after it is taken? As I am taking the photo it is the correct way but when it transfers into my camera it rotates to be upside down.

That seems to be a bit too fast if it continues to drain that quickly. That would be 20° drain each hour only giving you 5 hours of battery life. Give it some time before you make any real assessment, the battery indicator can act sort of funky at times. My indicator will stay on 100° for 15 minutes and then start to drain rather quickly until it evens out and gets to where it should be. From that point on, it will reduce at a normal rate.
You can try resetting the iPad. Sometimes that cures hunky little software issues. Sometimes, restarting the iPad can return the gauge to a normal reading.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I have a LaserJet Pro P1606dn - the second page prints upside down when using the duplex print optio

Operating system Windows 7 32 bit. I have re-installed the printer an I have downloaded and applied the most recent drivers from the HP site. The built in set-up shows the settings correctly as duplex on and bind on the long edge but the second page continues to print upside down i.e. it seems to always print as binding on the top edge.
However when I print from my iPad via Airprint the duplex print works perfectly!

IF you are using a printer with 2-sided printing, in the expanded print dialog you will have a selection for long-edge binding OR short-edge binding. Whichever setting you have set, switch to the other one.
Walt

Graphics print upside down

Hello,
New Robo User here, though I struggle to see how that could
be the problem in this case
Running RoboHelp HTML X5.0.2 (build 801)
I have a series of topics with tables containing text
instructions and screenshots of software steps.
When I print from the compiled view in a browser or from the
Preview window all is normal.
However, if make the document view active on the right hand
pane (WYSIWYG) and click the printer icon labeled "Print Active
Pane" then all the text is normal, but any graphics are upside down
and backwards. They are read better from the backside of the paper.
Quite curious.
I cannot begin to fathom the usefulness of this so assume it
must be a bug. Has anyone else ever come across this?
Thanks,
Don

Hi Don - welcome to our community and the world of RoboHelp!
Although I've never experienced it myself (been using
RoboHelp since 1992 and now train it) I've seen reports of this off
and on for years. If I recall correctly, the answer may be as
simple as upgrading or changing your printer driver.
Cheers... Rick

Cannot back up with Time Machine/Capsule after new drive installed in MacBook Pro

MacBook Pro 2.53 GHz Intel Core 2 Duo running 10.8.5.
I just had a larger hard drive installed by Tekserve. This is to be my first back up since installing the new drive. I have 2 back ups: one to my Time Capsule via WiFi, the other to an external Le Cie via USB.
Time Machine just gives me preparing to backup but goes no further, just stuck in that mode. I suspect that it can't find my old drive, which it backed up till now. But I cannot find a way to correct this possible snafu. I do not see an option in Preferences.
Any thoughts?
Thanks

Just so we are clear.. were your files all recovered from backup after the install of the disk?? Did you supply one of the backups to the company who did the installation so they could do the recovery?
You do want to be careful not to damage the old backup.. it might really be better to start over a clean new backup.
TM should be reset. It sounds like they did recover your settings.. Please check Pondini here.
A4 http://pondini.org/TM/Troubleshooting.html
Also use A1 to check what the log is saying about TM.. the old backup will need to be fully indexed and checked if you intend to keep using it.. and that will take several hours to the TC if you use wireless.. The problem people expect fast starts but that is not possible unless you are doing a new backup.
You can also check some of the other help files there eg D1 long preparing for why that happens.

Pdf printing upside down

Whenever I try to create a pdf of one sheet of a larger pdf, everything works fine if I use "current page". But if I zoom in and try to print "current view" to fit to 8 1/2 x 11, the resulting pdf is upside down (rotated 180 degrees). I am using the trial of Acrobat Pro. Any idea what would cause this? I verified through the windows printer settings and all settings from inside Acrobat that the page is set up to "Landscape" and NOT "Rotated Landscape".
UPDATE: I have traced it to the option which says "Choose paper source by PDF page size". If I have this checked, everything is always correct. If I uncheck this and print either the current page (to the AdobePDF printer) or a zoomed in view, it may be correct or it may be upside down or it may be rotated 90 degrees. By the way, using the free Foxit Reader PDF printer always prints to the correct orientation.
Any help would be appreciated since I cannot justify the cost of this software if it cannot print as consistant as a free alternative.

^^Bump due to added information that may help with the specifics of the problem.

Using pages to create a two-sided brochure and second page prints upside down!

When using a pages template to create a two-sided brochure, the second page needs to be reversed (upside down) for correct printing when emailing to an outside printer sources. How do I reverse the page within the pages app?

IF you are using a printer with 2-sided printing, in the expanded print dialog you will have a selection for long-edge binding OR short-edge binding. Whichever setting you have set, switch to the other one.
Walt

My Mac 10.7.5 won't shut down after new software (security update 2013-003) installation-- hangs at grey screen with "software update" at top. It also intermittently goes to sleep without my asking. What to do?

My Mac 10.7.5 won't shut down after a new software installation (Security Update 2013-003). It just hangs at a grey screen with "Software Update" at the top. I have to force quit, then restart-- but the new software hasn't installed.
My Mac also intermittently goes into Sleep mode, repeatedly, unprompted by me. I suspect a connection between these two problems.
I have tried deleting the /Library/Updates folder. It hasn't helped. The update still won't install, and my Mac won't shut down without my forcing the quit.
Help please!

Hi, I've just come accross the same problem... did you manage to get a resolution??
Cheers, Chris.

Mac Pro refuses to boot after new drive instalation...

Hi
Could anyone shed a bit of light on my problem - Ive just got a new 500gb seagate drive, - when I load it up in order to format, im faced with a blank screen, and os x refuses to even think about booting up - there is also an odd click which Im guessing is the boot drive trying to start.
The new drive slots into place fine, and I made sure I was earthed out before touching it...
When the new drive is taken out, the system starts up without a hitch.
Do I have a duff drive? - or am I missing something blindingly obvious?
Thanks for any help
Maxine.

Hi,
Funny that I saw this message, I am the person that had the exact same problem on the 20th of December.
After trying to install the HD, I had the problem as well. I ended up taking the computer in to my local Apple store, and they kept the Mac Pro.
It is now January 5th and I still do not have the system. Called them an hour ago and they said that the part (they didn't mention what it was) was on BACKORDER, so they had to decide if they were going to wait for the part or give me a brand new system. Hmmmm.... Could this be a NEW hidden problem for the Mac Pro now?
I wanted to purchase an iMac, but was afraid of the lock-up issues. I am starting to regreat my choice and wish I had got an iMac, at least I would have some kind of file server for my network
All I can suggest is to take it in to your local Apple store and let them check it, and then ask if they could fix it right then, or you two could have a system that's not able to be workable.
-Dan Uff

Requery Drop Down after new record added

Hi,
I have a form built with ADDT. There is a dropdown box tied to the buyers table (ID, Name) and a button to add new buyers. The buyers table has full contact info in it so I can't use the editable drop down. I need to be able to requery the drop down box after the user clicks the add buyer button, which opens a window with the add buyer form, so that it checks the table again and shows the new buyer in the drop down list.
At the moment I have it all working except that when the user adds a new buyer they have to refresh the page, losing any data already entered, in order to see the newly entered data in the drop down. Is there a way to requery the drop down after a new record has been entered or when the user clicks the submit button of the add buyer form? Or, maybe requery when the user clicks on the control again after entering the new buyer?
Any help is much appreciated,
Tony

Thanks again Gunter,
Sorry, I've been out for a few days. I ended up solving the problem by adding a preform search form to search for the buyers in the table before hitting the form. If the buyer isn't there it's added before going to the form. Works for me.
I do have another question about a javascript I've been trying to get working on the same form. It converts numbers in one field to words in another (http://javascript.about.com/library/bltoword.htm) and looks fairly simple, but I think the way ADDT creates the fields names I can't figure out how to make it work. I was able to get it to work on a simple html form, but not the ADDT form. Here's some code with the two fields and the button that calls the javascript. Below that is the call in the head section. The link is also there, but I don't need to post it.
I know this can work but I really could use some help.
Thanks for any help
<td class="KT_th"><label for="guarantee_<?php echo $cnt1; ?>">Guarantee:</label></td>
<td><input type="text" name="guarantee_<?php echo $cnt1; ?>" id="guarantee_<?php echo $cnt1; ?>" value="<?php echo KT_escapeAttribute($row_rscontracts['guarantee']); ?>" size="10"/>
<?php echo $tNGs->displayFieldHint("guarantee");?> <?php echo $tNGs->displayFieldError("contracts", "guarantee", $cnt1); ?>
<label>
<input type="button" onclick="form1.price_text_1.value = toWords(form1.guarantee_1.value);" value="Convert to Text" />
</label></td>
<td width="106" class="KT_th"><label for="foreign_exchange_<?php echo $cnt1; ?>">Curreny:</label></td>
<td width="150"><select name="foreign_exchange_<?php echo $cnt1; ?>" id="foreign_exchange_<?php echo $cnt1; ?>">
<option value=""><?php echo NXT_getResource("Select one..."); ?></option>
<?php
do {
?>
<tr>
<td width="109" valign="top" class="KT_th">Price Text:</td>
<td width="197" valign="top"><span class="KT_th">
<textarea name="price_text_<?php echo $cnt1; ?>" cols="32" id="price_text_<?php echo $cnt1; ?>"><?php echo KT_escapeAttribute($row_rscontracts['price_text']); ?></textarea>
</span></td>
This is in the head section:
<script language="JavaScript" type="text/javascript">

</script>

CLJ3600DN Printing upside down after new driver

Similar Messages

Maybe you are looking for