Clj5550n network address not stable

color laser jet 5550n. i m using this printer almost 5 years with network.
but now these days the network address is not keeping in memory.
every time i have to install the network printer for a single print.After every 10
minutes have to add network printer.the memory is not staying.
please help me to solve the problem.
thank you.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Hyperlink to server network address NOT http address

Hi,
I'm trying to use a hyperlink in my form, but I want to link to a server.
The server address is
\\dahlingroup.com\plfiles\Jobs
and it's an internal server, but everytime I click it, the form tries to link to a File on my computer.
Does anyone know how to fix this? Thanks in advance.
Stan

Geo,
I believe for a UNC path you would need 4 /'s, otherwise it will try to render the path relative to the local system root.
file:////server/share/folder/file.ext

Windows Mail app in LAN-Network "e-mail address not available"

Hello,
I have a Problem with the Windows Mail app at Windows 8.1. Everything works normally at home, but when I try to update mails at university I get the message "e-mail address not available", but Hotmail works fine. I have four more addresses synced,
none of these is updated while I am logged in at university.
So when I start my computer, I have to log in in the University network via IE, there is also a timeout after an hour or so.
I have to go access my mails in the browser, but that is quite bothersome with four e-mail addresses.
Anyone who has an idea how to solve this?
UPDATE: OneDrive does also not sync. It says all Files are up to date, but there are not. If I try to download files via Onedrive App, I get the error message "Currently, the file can't be opened. An Error ocurred with OneDrive."

Hi,
How about your problem now? Is your Mail APP still works properly in your home? According to your description, it's should your School network problem. Is your IE enabled any network Proxy when you using it at school?
Roger Lu
TechNet Community Support

WRT54G Wireless Router Will Not Assign a Network Address

A Linksys WRT54G router will not assign a network address when I access the router using a Linksys WPC600N wireless card. I have the same problem accessing the router with a TRENDnet TEW-621PC wireless adapter. Both wireless adapters are assigned network addresses when I use other wireless routers. Also, I have no problems being assigned a network address when I access the WRT54G router in question using an old 2WIRE 802.11b wireless card.
I have tried "Repairing" the connection, I have used ipconfig to "release" and "renew" the connection. However, each attempt fails to have a DHCP address assigned.
I am a visitor at the work location with the connection problem, the router works for others without any issues.
Thanks

Well in such case .... you can try few settings on the wireless adapter ....
If you are using WLAN monitor .....
Click start >> All programs >> Linksys wireless monitor >> Click on "Profile" >> Delete all profiles >> Click "New" >> Type in the wireless network name >> Click next >> Configure the rest of the wireless settings same as in the router ...
At last point it shows .... all the configuration settings ...reconfirm that >> Click on connect ot a network & reboot the computer ...
After reboot see if it shows connected or not....
You can also use Static Ip in the configuration ....

Message "Network address default of computer not mainatined" in CV01N.

Gurus,
I just created content repository in OAC0 and linked it to storage type in OACT. Now when I try to checkin the original document in CV01N. Instead of asking me for storage type, its displaying message saying that "Network address default of your computer is not maintained".
Regards,
Rajesh.

HI Rajesh,
Please do the require setting in DC20 define data carrier.
in dc20 : click on define data carrier for server frontend computer. define data carrier there,.slect it and click on the folder Identify frontend computers. Make the setting default there.
Once you make the defualt setting, that error will get resolved.
thanks
regards,
nitin

The server network address can not be reached or does not exist

Hi all
    When i am trying to configure Mirroring .i am getting the below error.
The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
. TCP/IP and Name pipe connection is enabled in both principle and mirror server configuration.
I post the complete error message below ,which is in red
TITLE: Database Properties
An error occurred while starting mirroring.
ADDITIONAL INFORMATION:
Alter failed for Database 'success'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Database&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1418&LinkId=20476
BUTTONS:
OK

Hi,
I have the same problem. However beginning over and over again and using other ports did not solve this unfortunately.
Here is the SQL I used to setup the mirroring.
* Principal DB
CREATE ENDPOINT [MirroringEndpoint]
    AUTHORIZATION [DOMAIN\administrator]
    STATE=STARTED
    AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
    FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = REQUIRED ALGORITHM RC4)
BACKUP DATABASE TEST
    TO DISK = 'C:\full-backup.bak'
    WITH FORMAT
BACKUP LOG TEST
    TO DISK = 'C:\log.bak'
ALTER DATABASE TEST SET PARTNER ='tcp://sql2.domain.local:5022';
* Mirroring DB
CREATE ENDPOINT [MirroringEndpoint]
    AUTHORIZATION [DOMAIN\administrator]
    STATE=STARTED
    AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
    FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = REQUIRED ALGORITHM RC4)
RESTORE DATABASE TEST
    FROM DISK = 'C:\full-backup.bak'
    WITH NORECOVERY
RESTORE LOG TEST
    FROM DISK = 'C:\log.bak'
    WITH FILE=1, NORECOVERY
ALTER DATABASE TEST SET PARTNER ='tcp://sql1.domain.local:5022';
The last statement on the principal server gives me the following error :
Msg 1418, Level 16, State 1, Line 1
The server network address "tcp://sql2.domain.local:5022" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
From the principal server I'm able to ping the mirror server and can establish a telnet connection. When the statement gets executed even netstat gives me the following output :
TCP    0.0.0.0:5022           0.0.0.0:0              LISTENING       1244 [sqlservr.exe]
TCP    10.1.1.140:5022       10.1.1.110:1223       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1226       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1216       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1218       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1225       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1222       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1221       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1224       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1219       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1220       TIME_WAIT       0
Is it normal so many ports get opened?
Any help would be greatly appreciated (as this drives me crazy :-( )
Found the problem eventually. The mirroring ran as the NT_AUTORITY user instead of DOMAIN\administrator.

I have just returned from visiting Italy where I got the internet from various wi fi addresses. Now on my return to England my wi fi will not connect to my router (smart phone does connect OK)saying 'this wi fi network could not be joined'. Any ideas?

The Air Port fan icon on the menu bar is greyed out and when I click it to connect a message appears ' the wi fi network could not be joined '. The wi fi is turned on both on the router and selected as on in the screen drop down. The smart phone works perfectly with the wi fi router so it must be something to do with the Mac book. It worked fine before I took it to Italy. It does work Ok using an Ethernet cable. Could it be that some Italian IP's are being stored in the laptop and the UK IP is not being recognised? Any ideas on what could be done? Any advice would be appreciated. Thanks !

Hi Here is part of the report which I've now pasted in . .
# --- Check Connectivity
05/30/14 16:16:38.8480           WiFi: WiFi interface is associated . . . fail
# --- Wi-Fi Interface
          Interface Name                    : en1
          MAC Address                    : 5c:96:9d:7c:a6:39
          Network Name                    : (null)
          Active PHY Mode                    : None
          Security                    : (null)
          SSID                    : (null)
          BSSID                    : (null)
          Country                    : GB
          RSSI                    : 0 dBm
          Noise                    : 0 dBm
          Rate                    : 0 Mbps
          Channel                    : 1
          Channel Width                    : 20MHz
# --- Bluetooth
          Power State                    : On
          Paired Devices                    : 0
# --- Wireless Environment
          2.4 GHz Networks          : 2
          5 GHz Networks                    : 0
          Current Channel Networks          : 1
          Recommended 2.4GHz Channels          : [ 6 2 3 4 5 7 8 9 10 12 13 ] 1
          Recommended 5GHz Channels          : [ 36 40 44 48 ]
# --- Network Configuration
          Primary IPv4 Interface          : None
          IPv4 Address                    : None
          IPv4 Router                    : None
          Primary IPv6 Interface          : None
          IPv6 Address                    : None
          IPv6 Router                    : None
# --- Debug Log Entries
05/30/14 16:16:38.9330           SMTP port is blocked
# --- Environment Test Cases
# --- Environment Summary
# --- Configuration Test Cases
05/30/14 16:16:38.9500 Wi-Fi interface is off, will not run configuration tests
# --- Configuration Summary
# --- Additional Information
05/30/14 16:16:45.1300
# --- Router Information
05/30/14 16:16:46.0980
# --- Create Diagnostics Report
Failed to collect system profiler report

BRIDGE process is not able to establish network address

Hi,
I am trying to setup a network application, the operating system is SunOS 5.8 , the listeners have been brought up, while booting the master it gives the error could not establish network address, check device and address. the network section of ubb is as below :
NADDR="//10.188.42.96:58640"
BRIDGE="/dev/tcp"
NLSADDR="//10.188.42.96:58641"
the ulog shows following entries....
075149.gws210d113!DBBL.15079.1.0: CMDTUX_CAT:4350: INFO: BBL started on d2d_3 - Release 7000
075149.gws210d113!BBL.15084.1.0: 07-15-2010: Tuxedo Version 7.1, 32-bit, Patch Level 350
075149.gws210d113!BBL.15084.1.0: LIBTUX_CAT:262: INFO: Standard main starting
075149.gws210d113!BRIDGE.15088.1.0: 07-15-2010: Tuxedo Version 7.1, 32-bit
075149.gws210d113!BRIDGE.15088.1.0: LIBTUX_CAT:262: INFO: Standard main starting
075204.gws210d113!BRIDGE.15088.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 75 seconds for port to clear
075219.gws210d113!BRIDGE.15088.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 60 seconds for port to clear
075234.gws210d113!BRIDGE.15088.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 45 seconds for port to clear
075249.gws210d113!BRIDGE.15088.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 30 seconds for port to clear
075304.gws210d113!BRIDGE.15088.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 15 seconds for port to clear
075319.gws210d113!BRIDGE.15088.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 0 seconds for port to clear
075320.gws210d113!BRIDGE.15088.1.0: CMDTUX_CAT:4340: ERROR: Could not establish network address //10.188.42.96:58640 - check device and address
075320.gws210d113!BRIDGE.15088.1.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
075320.gws210d113!BRIDGE.15088.1.0: CMDTUX_CAT:494: INFO: BRIDGE exiting system
Thanks.
Edited by: user12831907 on Jul 15, 2010 12:10 AM

Hi,
the ports seem to be clear, lsof gives following ouput :
(gws210d113)/opt/tuxedo> lsof -i :58640
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
tlisten 19585 tuxedo 3u IPv4 0x3002fbff228 0t0 TCP gws210d113:58640 (LISTEN)
(gws210d113)/opt/tuxedo> lsof -i :58641
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
tlisten 19592 tuxedo 3u IPv4 0x3003ddaec70 0t0 TCP gws210d113:58641 (LISTEN)
I am starting tlisten as non-root user and as follows :
tlisten -l //10.188.42.96:58640
tlisten -l //10.188.42.96:58641
The following are the logs from master machine :
021524.gws210d113!DBBL.19074.1.0: 07-24-2010: Tuxedo Version 7.1, 32-bit
021524.gws210d113!DBBL.19074.1.0: LIBTUX_CAT:262: INFO: Standard main starting
021526.gws210d113!DBBL.19074.1.0: CMDTUX_CAT:4350: INFO: BBL started on d2d_3 - Release 7000
021526.gws210d113!BBL.19079.1.0: 07-24-2010: Tuxedo Version 7.1, 32-bit, Patch Level 350
021526.gws210d113!BBL.19079.1.0: LIBTUX_CAT:262: INFO: Standard main starting
021527.gws210d113!BRIDGE.19080.1.0: 07-24-2010: Tuxedo Version 7.1, 32-bit
021527.gws210d113!BRIDGE.19080.1.0: LIBTUX_CAT:262: INFO: Standard main starting
021541.gws210d113!BRIDGE.19080.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 75 seconds for port to clear
021556.gws210d113!BRIDGE.19080.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 60 seconds for port to clear
021611.gws210d113!BRIDGE.19080.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 45 seconds for port to clear
021626.gws210d113!BRIDGE.19080.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 30 seconds for port to clear
021642.gws210d113!BRIDGE.19080.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 15 seconds for port to clear
021657.gws210d113!BRIDGE.19080.1.0: CMDTUX_CAT:4400: INFO: Waiting up to 0 seconds for port to clear
021658.gws210d113!BRIDGE.19080.1.0: CMDTUX_CAT:4340: ERROR: Could not establish network address //gws210d113:58640 - check device and address
021658.gws210d113!BRIDGE.19080.1.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
021658.gws210d113!BRIDGE.19080.1.0: CMDTUX_CAT:494: INFO: BRIDGE exiting system
021701.gws210d113!tmboot.19064.1.-2: 07-24-2010: Tuxedo Version 7.1, 32-bit
021701.gws210d113!tmboot.19064.1.-2: CMDTUX_CAT:825: ERROR: Process BSBRIDGE at d2d_3_fallback failed with /T tperrno (TPENOENT - no entry found)
021703.gws210d113!tmboot.19064.1.-2: CMDTUX_CAT:825: ERROR: Process BBL at d2d_3_fallback failed with /T tperrno (TPENOENT - no entry found)
021703.gws210d113!tmboot.19064.1.-2: WARN: No BBL available on site d2d_3_fallback.
Will not attempt to boot server processes on that site.
Also, I think that the problem occurs when master is trying to boot the services on slave machine, the following is the ULOG entries logged in slave machine :
022324.apt3s009z1!BSBRIDGE.14223.1.0: 07-25-2010: Tuxedo Version 7.1
022324.apt3s009z1!BSBRIDGE.14223.1.0: LIBTUX_CAT:262: INFO: Standard main starting
022324.apt3s009z1!BSBRIDGE.14223.1.0: CMDTUX_CAT:1373: ERROR: Abnormal disconnect from gws210d113
022324.apt3s009z1!BSBRIDGE.14223.1.0: CMDTUX_CAT:473: ERROR: Could not find DBBL
022324.apt3s009z1!BSBRIDGE.14223.1.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
022326.apt3s009z1!BBL.14224.1.0: 07-25-2010: Tuxedo Version 7.1
022326.apt3s009z1!BBL.14224.1.0: LIBTUX_CAT:503: ERROR: Cannot find DBBL
022326.apt3s009z1!BBL.14224.1.0: LIBTUX_CAT:248: ERROR: System init function failed, Uunixerr =
022326.apt3s009z1!BBL.14224.1.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
Also, it might help to know that on Slave machine, the connection is established on the listener port :
10.80.156.13.58502 10.188.42.96.64462 131768 0 49248 0 ESTABLISHED
10.80.156.13.58502 *.* 0 0 49152 0 LISTEN
Thanks and Regards.
Edited by: vis_punch on Jul 24, 2010 2:53 AM

Router not assigning network address

I have the Verizon FIOS Actiontec router. The wired connection is great but the wireless connection is nothing but trouble. My wireless computers see the wireless network and say they "connect" to it, but then they have a problem getting a "network address" from the router - about half the time I get no network address and so can't access my network or the internet. The actual message is "Getting network address" - this stays on for a minute or two and then I get the message that I have no or limited connectivity and I can't connect - even though the network signal I get is "very strong". I try rebooting my wireless computers, re-booting my router and sometimes it connects and sometimes it doesn't - there is no pattern. If I leave my computer alone it will re-try the connection every once and a while and may eventually connect - usually if I wait long enough, but this may be hours or a day latter before it will eventually connect. It is not a password issue because about half the time I have no problem at all, the other half of the time it may be hours or a day before I can connect.
Verizon sent me a new router and I have the very same problem. I never had this problem when I used my own wireless router with DSL (before FIOS). The same problem is true for both a desktop with a wireless connection and a netbook I have (all systems are running xp). I even re-set up my old wireless router in serial with my Verizon router and both computers picked up and connected to the old router right away - I even got internet using this serial set up - but I have other problems with this set up so it really is not a solution - but it was useful in letting me know it is not something with my wireless computers. I even uninstalled and reinstalled the wireless adapter to my desktop and that did not help.
Has anyone else had this problem? Why is this happening? What can I do to fix this? Please help.

How to improve wireless networking on Verizon MI424WR
follow this guide, but you're best bet is to change the wireless channel. that is a relatively painless procedure. There are only three channels in N.America that are useable. Those are wireless channel 1, wireless channel 6 and wireless channel 11.
you probably have some heavy interference on whichever wireless channel you are currently on. One of the three listed should provide good results for you, but you'll want to cycle through each of them to find which channel is the best.
Log into your router
http://192.168.1.1
Default user name is 'admin'
Default Password is 'password1' other variants are 'password', or 'admin'
Once you're logged into the router, stay in the first column and look for change wireless settings.
When you click on that your wireless settings will come up, and you'll see the channels as your number 3 option. simply use the drop down list to choose channel 1, place a check mark where it says something to the effect of "keep these changes even after a reboot" and then hit apply.
wait for it to lock in, try to reconnect to your wireless and try it out for however long it takes to drop off again. if it does not drop off then you are good, if it does, then change it from 1 to 6, and then if that does not work change it to 11.
also take a quick look at the actiontec link at the top. It's very basic but it gives some food for though with regard to things that potentially can interfere with that wireless transmission.

WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

Error:Network address DEFAULT of your computer is not maintained

Hi Experts,
I am creating Document InfoRecord using BAPI :BAPI_DOCUMENT_CREATE from a report program, when i execute it, BAPI is
returning a Error: *Network address DEFAULT of your computer is not maintained.* Can any one suggets on this, or i need to do
any setting for Network Address ?
Pleese respond ASAP.
Thanks and Regards,
ALSDIN

This sounds similar to an issue discussed here
http://www.sapfans.com/forums/viewtopic.php?f=23&t=284434

TS1398 my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank

my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank

WiFi Troublshooting
iOS: Troubleshooting Wi-Fi networks and connections
Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).
Wifi Settings greyed out or dim
http://support.apple.com/kb/TS1559
Recommended wifi settings
http://support.apple.com/kb/HT4199

Network address DEFAULT of your computer is not maintained

Hi Gurus,
I'm trying to install DMS (ECC 6.0), when I need to see original document (CV02N) I get the message in subject.
Text help indicates the following:
In the IMG for document management, you need to make an entry with the network address DEFAULT and assign this entry to a data carrier type.
Could you provide me with the steps to achieve that?
I really appreciate your help.
Best regards.

Hi Juan,
Go to transation code DC20 -> select define data carrier type, "server, front end" -> select your data carrier type -> click on identify frontend computer --> click on default entry and save it.
Thanks,
Sam.

PL/SQL Network Address Type Functions

Hi,
I'm wondering if anyone knows of a PL/SQL package(s) that provides similar capabilities as the following postgreSQL network address type functions:
http://www.sql.org/sql-database/postgresql/manual/functions-net.html
I don't see anything in the standard Oracle 10g packages, so I'm wondering if anyone else has dealt with this problem and posted the package.
Thanks,
- Greg.

I think the easiest way of getting some of this functionality would be to write a PL/SQL wrapper to a Java Stored Procedure that implements calls to the Java InetAddress class. It doesn't haven't the full set of operators but I'm not sure what 'less than' actually means in the context of an IP address . If you really need them you could always extend the InetAddress class to implement such tests.
Cheers, APC

Error in installing 11g2 in silent mode - [SEVERE] - Email Address Not Spec

I want to install Oracle 11g release 2 in silent mode on Redhat Linux 5.2. I use command /u01/app/ora_sw/11g2/database/runInstaller -silent -responseFile /u01/app/ora_sw/11g2/database/tdev_install.rspwhere tdev_install.rsp has entries oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0
oracle.install.option=UPGRADE_DB
ORACLE_HOSTNAME=cchdb.thinkstream.com
UNIX_GROUP_NAME=oinstall
INVENTORY_LOCATION=/u01/app/oraInventory
SELECTED_LANGUAGES=en
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORACLE_BASE=/u01/app/oracle
oracle.install.db.InstallEdition=EE
oracle.install.db.isCustomInstall=true
oracle.install.db.customComponents=oracle.server:11.2.0.1.0,oracle.sysman.ccr:10.2.7.0.0,oracle.xdk:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network:11.2.0.1.0,oracle.network.listener:11.2.0.1.0,oracle.rdbms:11.2.0.1.0,oracle.options:11.2.0.1.0,oracle.rdbms.partitioning:11.2.0.1.0,oracle.oraolap:11.2.0.1.0,oracle.rdbms.dm:11.2.0.1.0,oracle.rdbms.dv:11.2.0.1.0,oracle.rdbms.lbac:11.2.0.1.0,oracle.rdbms.rat:11.2.0.1.0
oracle.install.db.DBA_GROUP=dba
oracle.install.db.CLUSTER_NODES=
oracle.install.db.config.starterdb.type=TRANSACTION_PROCESSING
oracle.install.db.config.starterdb.globalDBName=tdev112.localdomain
oracle.install.db.config.starterdb.SID=tdev112
oracle.install.db.config.starterdb.characterSet=AL32UTF8
oracle.install.db.config.starterdb.memoryOption=true
oracle.install.db.config.starterdb.memoryLimit=3200
oracle.install.db.config.starterdb.installExampleSchemas=false
oracle.install.db.config.starterdb.enableSecuritySettings=true
oracle.install.db.config.starterdb.password.ALL=
oracle.install.db.config.starterdb.control=DB_CONTROL
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=/app/oracle/oradata
DECLINE_SECURITY_UPDATES=true
oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=true
oracle.install.db.config.starterdb.dbcontrol.emailAddress=glu@thinkstream.com
oracle.install.db.config.starterdb.dbcontrol.SMTPServer=earth.thinkstream.comI got error in a couple of seconds Checking Temp space: must be greater than 120 MB. Actual 2451 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1890 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-01-08_05-20-03PM.
Please wait ...[oracle@cchdb database]$ [SEVERE] - Email Address Not Specified
I removed the last 3 entries involving notification email, but got the same error.
What email address I need to provide and where I should specify it ?

Finally figured this one out.
It happens when oracle.install.db.config.starterdb.type is set to TRANSACTION_PROCESSING.
Apparently "TRANSACTION_PROCESSING" and "GENERAL_PURPOSE/TRANSACTION_PROCESSING" are not valid types, even though the response template file and the response file generated via OUI list the following:
Response template file included in the database package:
+#------------------------------------------------------------------------------+
+# Specify the type of database to create.+
+# It can be one of the following:+
+# - GENERAL_PURPOSE/TRANSACTION_PROCESSING+
+# - DATA_WAREHOUSE+
+#------------------------------------------------------------------------------+
Response file generated by OUI during an interactive install:
+#-------------------------------------------------------------------------------+
+# One of the following+
+# - GENERAL_PURPOSE+
+# - TRANSACTION_PROCESSING+
+# - DATAWAREHOUSE+
+#-------------------------------------------------------------------------------+
In order to install in silent mode I used the following settings:
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false
oracle.install.db.config.starterdb.dbcontrol.emailAddress=
oracle.install.db.config.starterdb.dbcontrol.SMTPServer=
MYORACLESUPPORT_USERNAME=
MYORACLESUPPORT_PASSWORD=
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
DECLINE_SECURITY_UPDATES=true

Clj5550n network address not stable

Similar Messages

Maybe you are looking for