Cloning environments for AP Imaging

Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic..
Can anyone tell me what is the best way to cloning the application from different environmenst, the test and production are in different physical server.
Can I just tar the weblogic file system and untar it to the new server and make the necessary changes and what configuration files need to be updated?
Can anyone share their experiences and how to with me? I am quite new on the weblogic.
Thank in advance.
Kacy

Hi Kacy,
Below guide has to be followed in order to move the Fusion middleware components from one environment to other:
https://docs.oracle.com/cd/E17904_01/core.1111/e10105/testprod.htm#ASADM339
Thanks,
Sharmela

Similar Messages

Recommended imaging/cloning method for Windows 8.1 system

Can anyone recommend a reliable way to completely image/clone a windows 8.1 based system?
I've tried 3 different methods with mixed success:
1. My old faithful method uses EzGIG-III, but the BIOS setting for boot configuration needs to be changed to CMS because the tool is DOS based. The cloning operation takes forever (~12 hours for my machine with a 750GB HDD that only uses 200GB). I've tried it twice. The first time I got a boot error when booting the clone, but Windows managed to automatically repair the boot issue. The second time I had no errors at all.
2. I've tried the free version of Macrium Refect three times. First time was from a bootable USB version and I don't recall any issue. Second time was from within Windows. When I swapped the drive and tried to boot the clone, the boot failed and I got a nasty error message about winload.efi missing. I did some Googling and found a command line procedure to rebuild the missing file, which seemed to work. Third time was also within Windows and everything worked ok (I'm using the resulting clone right now as a matter of fact). Nice thing is the cloning operation only took 2 1/2 hours (compared to 12 hours with EzGIG). Also, I had trouble cloning in the opposite direction - just couldn't get it to work.
3. Third method is the System Image utility that's built into Windows 7/8/8.1. It failed right away claiming the destination location had insufficient space for the image even though the capacity was much greater than the source. I'm working through this right now and am hopeful to get it working. The down side of this method is that two separate operations are needed; one to create the image and a second one to restore it. Also, I wonder if the image will include non-windows partitions (as in Linux dual boot).
I'd appreciate any positive stories about successful cloning / imaging.
Solved!
Go to Solution.

I've tried the free version of Macrium Refect three times. First time was from a bootable USB version and I don't recall any issue. Second time was from within Windows. When I swapped the drive and tried to boot the clone, the boot failed and I got a nasty error message about winload.efi missing..
I've had mixed results with cloning. But restoring from an image always works. If you want reliability, do it that way.
Third method is the System Image utility that's built into Windows 7/8/8.1. It failed right away claiming the destination location had insufficient space for the image even though the capacity was much greater than the source.
The down side of this method is that two separate operations are needed; one to create the image and a second one to restore it.
Also, I wonder if the image will include non-windows partitions (as in Linux dual boot).
1. That problem occurs because the perverse backup program wants to write to each partition on the drive being imaged. See this thread for the fix.
Cant backup 8.1 using system image backup! Error 0x80780119
2. As I said, I've found imaging to be more reliable than cloning. How often would you restore? We image all our computers daily (3am) and retain images for ten days.
3. The image includes all the partitions on the disk - at least mine does.
In case you want to use the built-in imaging program, I can give you a shortcut to it in Windows 8.1.
-Jerry

Adobe Bridge (CS6) - bulk action - JPEG Options must be OKed for every image

Hi all-
I created an action script for a watermark in Photoshop CS6. Then, I ran my script as a bulk action in Adobe Bridge (CS6) against my JPEGs. However, the JPEG Options dialog/window appears for every image in PS. Is there a way to have this automatically OK (and at the highest quality) so that I don't have to sit and click OK over and over?
I am on a Mac btw.
Thanks!

Please help

Open Dialog box: disable image preview (For large images, it's SLOOOWWWW)

Open Dialog box in column view:
Can I disable image preview?
For large images, it's SLOOOWWWW !!!!!
( I often work with 8000 x 3500 panoramic images )

William
Mostly this is a problem in PhotoshopOK, my Photoshop is still a Classic version. I was looking at one or two others, like GraphicConverter, but the only pref there seems to be to generate a Preview if one doesn't exist.
I'll look some more—it's irritating me now

Data type for Saving Image in SQL database

Hi,
Which is the best way for saving images in the database? Filestream or Varbinary(max)?. Will the Varbinary max comsume much space or it will only take the actual size of the data?

I've used FILETABLE for storing images in SQL 2012
You can configure it to have transact and non transact access if you want
see
http://visakhm.blogspot.in/2012/07/working-with-filetables-in-sql-2012.html
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Is there a way to use a single bitmapdata for multiple images with GPU mode?

With GPU mode is there a way to bring in a single 1024 X 1024 png containing all my sprites and then slice it up into multiple display objects all refering to the original BitmapData?
I have an app that runs in GPU mode - but I want to optimize the image management.
I am making three sets of images in the orders of 2048, 1024 and 512 px.
The app is a book app and each page has around 4 to 5 bitmaps. I would like to bring in one single image and slice it up - but just refer to the original bitMapData in the memory.
Is there a way to do this - e.g. using a masking technique?
I think it is possible using textures in direct mode - but that is not an ideal solution for me - as the app is already in the appstore - and I would have to entirely refactor it for stage3D. Also I use very large bitmaps which have some masking animations applied to them dynamically: http://youtu.be/Nm0T1jLCTz8?t=42s
Currently, I use jpgs and a jpeg mask file for each image which I composite to get the alpha - then I scale them.
PNGs may be better for GPU - (no compositing) but they make for a huge app file.
Now I am converting it to use diffent sized assets depending on the device, then scaling them if need, and then compositing them for apha. What I was hoping was to find a technique that could reduce the number of bitmapdata objects used and reduce the operations in general.
Any thoughts on optimizing would be appreciated. I can add my code here if it helps.

Tell Apple:
http://www.apple.com/feedback/iphone.html
We're all users here, just like you.

How do use the same crop for multiple images.

I have a number of images that I want to use the same crop on. Instead of go through the whole slow process for each image is there a way to use the same crop for all of the images?
And in iPhoto there was a way to copy the adjustment settings to multiple images, I can't see how to do that in aperture.

Use the "Lift&Stamp" tool:
Crop one image.
Lift the crop using the "Lift" tool.
Select the other images.
Stamp the crop adjustment to all of them.
But caution: By default "Lift" will copy all Metadata tags and all adjustments, but the gps data. If you only want to transfer the cropping rectangle, deselect all lifted items but the crop adjustment before stamping.
Regards
Léonie

All of a sudden the screen on my iMac 10,1 is too small for the image. Can't figure out how to reduce the size of the Finder or any of the Apps.

All of a sudden the screen is too small for the image. Hard to explain, but in order to see the entire Finder window, I must scroll the image up/down, left/right.
It's not just the Finder though, all of the apps are affected this way too.
It's probably got something to do with the fact that I have an HDMI cable running from the Mac to a Vizio 42" TV. It's been running this way just fine for over two months though.
Any ideas?

You probably accidently zoomed the screen. Hold down CNTL while scrolling down with the mouse or trackpad to unzoom. Cntl - scroll up to zoom.
Regards,
Captfred

I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.

Hi all,
I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
Thanks in advance!

Most of the documents have sensitive info on them. I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
Thanks for you help.

For a laptop for LR image loading on trips - is 1366x768 screen enough and HDD size?

I have big pc and big screens for editing at home, but for travel am looking for a laptop for loading images on the road and basic LR sorting and tagging while away.
2 questions to get your experiences, forum regulars, about my direction:
1. 1tb HDD with an external 1tb HDD as backup - rather than 256 or 512 gb inboard SSD (reasons of $$$ and also to load all my images on a trip)
2. 14 inch screen with 1366 x 768 or similar rather than full HD ($$$ reasons and becasue I figure I can zoom in to check focus on that screen just fine)
Your comments and experiences?
Oz

It meets the minimum requirements for display size which is 1024 x 768
I use a 15 inch Macbook Pro on the road, so pretty close in size.
You may find this video useful on the subject of working away from base and exporting the laptop catalog into your master catalog when you get back.

ADD FILES FOR UPLOAD - IMAGE PATHS DO NOT WORK IN WIDGETS

Hi There
I'm trying to add my own images to a widget I bought from Qooqee - the Wrapper_v2 image slider. But when I try to add my own images with the image path it doesn't work. I've tried adding the image with 'Add Files for Upload' - and then using the full path which I get from right clicking on it in the assets panel - but it still doesn't work.
Most of the widgets require you to either specify the image path, or an external URL. I do not want to use a third party image hosting site to get URL's for every image I want to use on the site - so I just need to know what I'm doing wrong with the Add files for Upload - why do my file paths not work in the widgets?

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???
Also, you need to ask for help from the widget maker

"Insufficient data for an image" when saving a file

I'm running Acrobat 9.5.0 on a Macbook Pro running OS X 10.6.8.
After scanning a document from my Canon MX882, or opening and editing an existing pdf I get the following error when I try to save the file:
Insufficient data for an image
When I try to save the file again, I get this:
The document could not be saved. There was a problem reading this document (109).
Sometimes the error also has (8) instead of (109).
When this occurs, the thumbnail of the page appears correct in the left pane; however, the content of the page itself is entirely or partially missing.
Any suggestions would be appreciated.
-c

I am also having this problem, especially with scanned documents. Since I need to download scanned documents in my work this is a big problem!Sometimes I can read but not save the document, sometimes one or two of the pages will be blank from the start. I have the latest version of Adobe Reader XI (11.0.10). I tried reducing the page zoom, a suggested workaround on this page: Acrobat: “Insufficient data for an image” error after updating to 10.1.4 or 9.5.2, but that did not help at all. FWIW I use a Windows 8.1 PC with 4 GB RAM. I usually download PDFs from the internet using Firefox.

Disable link for a Image in Content editor web part

Hi
i want to disable hyperlink for a banner added using content editor web part. Instead of hiding using Target Audience, i want to disable the link.
Please help me how can i achieve this?
regards,
Vinay
Thanks and Regards, vinnu

Hi Vinay,
I recommend to disable the link for an image using Jquery in Content Editor web part.
First, you need to use F12 tool in Internet Explorer(IE) to get the html tag for the image, and you’d better find the class or id value for the tag of the image.
For example, if the class for the image is test, then the code should be:
<script type="text/javascript" src="http://code.jquery.com/jquery-1.8.2.js"></script>
<script type="text/javascript">
$('.test').click(function(e) {
e.preventDefault();
</script>
You can also paste the code of the image here for further research.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error when opening legitimate documents "Insufficient data for an image"

I work for a company who has sold "downloadable resources" via PDF for years now. We created a large batch of PDF documents in 2003 with
Adobe Acrobat 6.0 paper capture, and these are all PDF 1.5 type documents. We've provided these resources for years, however just today we were notified by a user that upon downloading the file they get a message "Insufficient data for an image". These ARE NOT HACKED PDF's. and they worked fine until 9.0. I have tried 9.0 and 9.1, on multiple computers and have confirmed this issue.
Now we are stuck with hundreds of PDF's that won't open in 9.x.
I did try downloading a free demo of "PDF-TOOLS" Recovery & Analysis tool, and I open the file using that program, scan the file - TELLS ME ALL IS OK, then resave it using that program.
Only then can I open it in 9.x.
What are we to do now short of buying a $200 tool and taking perhaps several days of time to open and save hundreds of "previously working" PDF files???

RollingRocker, did you ever get a solution for this? I am having the same problem. I produce a pdf using a JSF third party api called flying saucer, which actually uses itext to produce the pdf. I can attempt to produce the same exact pdf over and over and about 85% of the time the error occurs and the rest of the time the pdf opens successfully with no error. Obviously 15% of the time the reader is completely happy with this pdf, so it is not a malicious document in any way.

White balance for infrared images

Hello there,
I love making infrared photos with my digital camera (Canon dSRL).
When I take an IR shot, I usually set the custom white balance inside the camera, so that false colours appear correctly. If I open the CR2 RAW file using the software provided by Canon (Digital Photo Professional) the image appears correctly; on the contrary, if I use Adobe Camera Raw (which I prefer to) it seems that my custom white balance is not properly displayed.
So I'm wondering if this is an issue of CR or there is something to do that I don't know. Can you help me?

This tutorial by Sean MacCormick shows how you can edit the camera profile so that White Balance for IR images is brought within the adjustment range that Camera Raw and Lightroom http://lightroom-blog.com/2009/05/creating-ir-camera-profile.html

Cloning environments for AP Imaging

Similar Messages

Maybe you are looking for