Cloning R12 on Same system win2003
Hello,
I am new to apps DBA, I have some basic doubts about cloning. I have installed apps12 on windows2003. I would like to clone this R12 on the same machine (different physical hard disk).
1. Executed preclone on dbTier & appsTier.
2. shutdown services & copied
d:\oracle\VIS\apps to E:\clone\oracle\VIS\apps
d:\oracle\VIS\db to E:\clone\oracle\VIS\db
3. on dbTier of Target directory , I executed perl adcfgclone.pl dbTier
Then answered various prompts.
But during 6% only it is exiting with error. When checked services, listener is created & started. When i see log,
it says cannot connect to database, and after several steps protocol error also
please guide me....
And also
(i) should I change SID of target as in above step (2)
E:\clone\oracle\VIS to E:\clone\oracle\XYZ
(ii) before running adcfgclone in above step(3), which context file I have execute.
(ii) During post clone process, I mean when executing adcfgclone.pl dbTier/appsTier some errors might be thrown. Inthat case how can I restart failed clone? Do I have to start all over again? When I run adcfgclone.pl again, Do i need to give different instane name, port pool during prompts?
Thanks for stopping by & replying.
Hi,
But during 6% only it is exiting with error. When checked services, listener is created & started. When i see log,
it says cannot connect to database, and after several steps protocol error also
please guide me....Please post the complete error message from the logs.
And also
(i) should I change SID of target as in above step (2)
E:\clone\oracle\VIS to E:\clone\oracle\XYZYes.
(ii) before running adcfgclone in above step(3), which context file I have execute. The context file will be created for you by Rapid Clone, so you do not have to execute any.
(ii) During post clone process, I mean when executing adcfgclone.pl dbTier/appsTier some errors might be thrown. Inthat case how can I restart failed clone? Do I have to start all over again? When I run adcfgclone.pl again, Do i need to give different instane name, port pool during prompts?Yes, you will have to issue the same command again. Do not give different instance name or port pool, just use the same ones you entered before (unless there is an issue with those values).
Regards,
Hussein
Similar Messages
-
Can I open these two database simultaneously on a same system?
I have cloned the current database using Oracle EM Clone tool on a same WinXP system. Can I open these two database simultaneously on a same system? If can, How can Iogin to another database(cloned database)?
You should be able to start both databases if you did the cloning correctly.
EM use RMAN duplicate to clone database. It's basically created a AUXILIARY database and duplicate target database into it.
You must enter destination global name and instance name before proceed. What's instance name you entered?
set your ORACLE_SID to that instance name and login. -
Development and consolidation same system
Hello All,
Can i declare both the development and consolidation as the same system without specifying test and production system in a track? If yes then is there any other factors to be considered?
Also the SC state is in grey whereas if i click synchronize DC dependencies it turns green. Any suggestions on this?
Regards,
AnandHI,
Can i declare both the development and consolidation as the same system without specifying test and production system in a track?
you can declare development and consolidation as the same system. but then you wont be able to distnguish between the changes you made.
keeping consolidation virtual is an good option than keeping development and consolidation as the same system.
and without specifying test system is not a good option, test system should have to be there, as at that stage only you assemble and check you development as a complete application. -
Bapi_po_create1 is giving same system messages multiple time in the joblog
Hi Experts,
Bapi_po_create1 is giving same system messages multiple times in the job log when we ran the program in the background
can u plz suggest how to prevent these multiple appearances of same messages.
I am pasting the code below whn i ran this program in backgorund job log is having the messages.
Date Time Message text Message class Message no. Message type
08/06/2009 08:11:53 Job started 00 516 S
08/06/2009 08:11:53 Step 001 started (program ZZZTEST, variant &0000000000008, user ID BREDDY) 00 550 S
08/06/2009 08:11:54 Commitment plan contains no account assignment data MECP 020 S
08/06/2009 08:11:54 Commitment plan contains no account assignment data MECP 020 S
08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement ME 053 E
08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement ME 053 E
08/06/2009 08:11:54 Source not included in list despite source list requirement 06 722 E
08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained VH 777 S
08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained VH 777 S
08/06/2009 08:11:55 Status "Initial Block" of material 20111 does not allow external procurement ME 053 E
08/06/2009 08:11:55 Purchase order still contains faulty items MEPO 000 E
08/06/2009 08:11:55 Job finished 00 517 S
Edited by: bhavani prasad kotharu on Aug 6, 2009 3:09 PMHERE IS THE CODE OF THE PROGRAM, WE R JUST PASSING SOME PO DATA TO THE BAPI_PO_CREATE1,ON RUNNING THIS PROGRAM IN BACKGROUND SAME SYSTEM MESSAGES ARE APPEARED MULTIPLE TIMES,----
REPORT zzztest.
DATA : lwa_bapimepoheader TYPE bapimepoheader
,lwa_bapimepoheaderx TYPE bapimepoheaderx
,li_bapimepoitem TYPE STANDARD TABLE OF bapimepoitem
,lwa_bapimepoitem TYPE bapimepoitem
,li_bapimepoitemx TYPE STANDARD TABLE OF bapimepoitemx
,lwa_bapimepoitemx TYPE bapimepoitemx
,li_conditions TYPE STANDARD TABLE OF komv
,li_return TYPE STANDARD TABLE OF bapiret2
, n TYPE c
PARAMETERS: p1 TYPE c AS CHECKBOX.
IF p1 = 'X'.
lwa_bapimepoheader-doc_type = 'NB'.
lwa_bapimepoheader-purch_org = 'NA00'.
lwa_bapimepoheader-pur_group = 'C02'.
lwa_bapimepoheaderx-doc_type = 'X'.
lwa_bapimepoheaderx-purch_org = 'X'.
lwa_bapimepoheaderx-pur_group = 'X'.
lwa_bapimepoitem-po_item = '10'.
lwa_bapimepoitem-material = '000000000000020111'.
lwa_bapimepoitem-plant = 'CA01'.
lwa_bapimepoitem-vend_mat = '1000'.
lwa_bapimepoitem-quantity = '10'.
lwa_bapimepoitem-orderpr_un = 'M'.
lwa_bapimepoitem-no_more_gr = 'K'.
lwa_bapimepoitem-agreement = '4600000095'.
lwa_bapimepoitem-agmt_item = '10'.
lwa_bapimepoitem-pricedate = 'X'.
lwa_bapimepoitem-price_date = '20071030'.
lwa_bapimepoitem-no_rounding = 'X'.
APPEND lwa_bapimepoitem TO li_bapimepoitem.
lwa_bapimepoitemx-po_item = '10'.
lwa_bapimepoitemx-po_itemx = 'X'.
lwa_bapimepoitemx-po_itemx = 'X'.
lwa_bapimepoitemx-material = 'X'.
lwa_bapimepoitemx-plant = 'X'.
lwa_bapimepoitemx-quantity = 'X'.
lwa_bapimepoitemx-po_unit = 'X'.
lwa_bapimepoitemx-orderpr_un = 'X'.
lwa_bapimepoitemx-acctasscat = 'X'.
lwa_bapimepoitemx-agreement = 'X'.
lwa_bapimepoitemx-agmt_item = 'X'.
lwa_bapimepoitemx-pricedate = 'X'.
lwa_bapimepoitemx-price_date = 'X'.
lwa_bapimepoitemx-preq_no = 'X'.
lwa_bapimepoitemx-preq_item = 'X'.
lwa_bapimepoitemx-no_rounding = 'X'.
APPEND lwa_bapimepoitemx TO li_bapimepoitemx.
DATA: lo_msg_handler TYPE REF TO cl_message_handler_mm.
CALL METHOD cl_message_handler_mm=>get_handler
IMPORTING
ex_handler = lo_msg_handler.
lo_msg_handler->remove_all( ).
lo_msg_handler->cleanup( ).
CALL FUNCTION 'BAPI_PO_CREATE1' "in background task
EXPORTING
poheader = lwa_bapimepoheader
poheaderx = lwa_bapimepoheaderx
testrun = 'X'
NO_MESSAGING = c_x
NO_MESSAGE_REQ = c_x
no_authority = 'X'
IMPORTING
expheader = lwa_bapimepoheader
TABLES
return = li_return
poitem = li_bapimepoitem
poitemx = li_bapimepoitemx
conditions = li_conditions.
ENDIF.
Edited by: bhavani prasad kotharu on Aug 6, 2009 3:38 PM -
Same system being shown multiple time in Solution for Early Watch Report
Hi Gurus ,
I have some satellite system configured to Solution Manager . Today I can see the same system entry multiple time in the
Operations: Solution Monitoring -> Early Watch Alert.
eg .,
I have a system whose SID is ABC , i can see the ABC entry for todays date (i.e., 4 FEB 08) nearly 4 time .And this systems are not rescheduled for the next EWR (i.e scheduled for 11 FEB 08- since we have kept a period of 7 days )
Please suggest
AnthonyHi Anthony,
There was an error, that EWA sessions for one systems were scheduled multiple times per week.
Please check [SAP Note 1083108 - Duplicate EarlyWatch Alerts|http://service.sap.com/sap/support/notes/1083108]
Search for SAP Notes with key words: EWA, multiple, duplicate.
Application area: SV-SMG-OP
What's the software configuration of your SolMan?
Best regards,
Ruediger -
Migrating Transports via CHaRM to the same system more than once
Good Day;
Does anyone know if CHaRM has the capabilities to migrate transports (within a maintenance cycle) to the same system multiple times?
Let me explain.
When we move a maintenance cycle (release) through our landscape we move from;
Development system - Quality system - Volume system. Then to production
UAT is being done in both the quality system and the volume system.
Once all testing is complete, we refresh the volume system with a fresh copy of the production system and re-import all the transports. This is to allow our BASIS team to do regression (batch) and load testing.
Is there a way to use CHaRM to migrate the transports or is this something that needs to be done manually (as it is today).
Thanks All,
Regards
Don NewtonJust Ceaning up
-
Multiple agentry servers installed in the same system?
Hello Experts,
There are two agentry servers installed in the same system,but in different drives(C and D drive).I have given access to one server remotely,in the sense the applications to the server in one drive are published by other developers who are connecting to the server through network. In the other drive server iam publishing the applications developed locally.But after deployment,when i connect to the server to retrieve definitions,iam getting the latest application published.
Is this situation possible,because when we connect to the server we are using ip address of the system where the server is installed,if both the servers are running in different drives,then which server application will be deployed,Is there any possibility to connect to the server instances(in my system two server instances),so that the application that is deployed to individual servers can be retrieved?
Thanks in advance
Regards,
Sravanthi
Message was edited by: Michael ApplebyHi Sravanthi,
I do not believe that you can run two Agentry Servers on the same hardware without making other changes (like running them on SMP 2.3). I would suggest that you look into the documentation for SMP 2.3 as your best solution at this time. Hopefully some more savvy Agentry folks will chime in with a more detailed response.
Regards, Mike
SAP Customer Experience Group - CEG
Message was edited by: Michael Appleby -
Not able to run adadmin adfter installing R12 Upgrade file system
Sawwan,
Now we are doing 11i apps to R12 upgrade single node, before we did database upgrade 9i to 10.2.0.4,
I successfully installed R12 upgrade file system with out any errors, i have chagned the
new Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
i moved the new environment file into .bash_profile
mv .bash_profile .bash_profile_11.5.10
Iset the R12 environment , When ever i tried to run adadmin system manager password is not taking its giving error
[applupg@peabody appl]$ adadmin
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications AD Administration
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Your default directory is '/u01/R12/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AD Administration records your AD Administration session in a text file
you specify. Enter your AD Administration log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adadmin.log] :
************* Start of AD Administration session *************
AD Administration version: 12.0.0
AD Administration started at: Sat Apr 18 2009 06:12:52
APPL_TOP is set to /u01/R12/apps/apps_st/appl
Backing up restart files, if any......Done.
Your previous AD Administration session did not run to completion.
Do you wish to continue with your previous AD Administration session [Yes] ?
You are about to use or modify Oracle Applications product tables
in your ORACLE database 'upg'
using ORACLE executables in '/u01/R12/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AD Administration needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema: manager
...Unable to connect.
AD Administration error:
The following ORACLE error:
ORA-12541: TNS:no listener
occurred while executing the SQL statement:
CONNECT SYSTEM/*****
AD Administration error:
Unable to connect to 'SYSTEM'; password may be invalid.
AD Administration needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
Enter the password for your 'SYSTEM' ORACLE schema:
Before running R12 adadmin is there nessary 11i apps servicess should up or down..
Edited by: HumanDBA on May 5, 2009 12:26 PMSawwan,
As a oracle user i am able to see the tns_admin home dir
[oraupg@peabody upg_peabody]$ echo $TNS_ADMIN
/stage/10gsoftware/network/admin/upg_peabody
[oraupg@peabody upg_peabody]$
After installing R12 uprade file system i am able do the tnsping
[applupg@peabody appl]$ tnsping upg
TNS Ping Utility for Linux: Version 10.1.0.5.0 - Production on 18-APR-2009 06:26:49
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=peabody)(PORT=1526)) (CONNECT_DATA=(SID=upg)))
TNS-12541: TNS:no listener
[applupg@peabody appl]$
[applupg@peabody appl]$ sqlplus apps/xxxx@upg
SQL*Plus: Release 10.1.0.5.0 - Production on Sat Apr 18 06:29:45 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Enter user-name:
========================================
Sawwan
after installing i am trying to apply R12.AD.B patch, do we need to apply this patch in 11i fiile system or New R12 file system, for 11i file system i am not getting any issue, but when ever i set the R12 new file system enviroment file then only i am not able to connect the database,i have changed new port numbers in R12 file system, is that causing any issues..?
Edited by: HumanDBA on May 5, 2009 12:37 PM -
Material Master - Client to client copy (Same System)
Hi,
The requirement is to copy a list of Material Master available in a specific client to a different client within the same system.
How to perform this activity with minimal manual intervention. Please give the solution in Detail.
(The Business scenerio is that, So for certain list of materials were procured & handled in specific Client. Now the same materials are now going to be handled in different client within the same System.)
Regards,
BaskarHi,
Use LSMW or BDC with MMZ1 t.code for material ( old material or used material) uploading to new client.
Regards,
Biju K -
Firefox notified me that an update was available to install and after this install was complete I could not stream video from any site. I was instructed to clear my browser cache, I did ti no avail. I updated Adobe Flash and exhausted the extent of my troubling abilities w/o causing any major system unrest. I accessed the same video steam through explorer on the same system, but firefox is a far superior browser and I like to solve this problem to avoid having to find another browser.
Please advise
Aaron SchulerI have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet. -
Dreamweaver 8 and DW cs4 or DW cs5 on the same system?
Hi all,
I'm using DW8 + MX Kollection 3.7 pro for large sites and I I'm thinking to install DW CS4 or CS5 along with it.
So, my question:
can I install DW CS4 + ADDT or DW CS5 (alone) on the same system?
Do they interfere each other?
I don't mind working on the same website with different version of DW.
But it could happen that I will need to edit a page of a website with a different verison of DW. Is there any problem to do this?
For example: will DW CS4 + ADDT retain all server behaviuors created in DW 8? or, at least, will DW CS4 editing break server behaviour so that I will not able to work again on the page with DW8?
Sorry for all these /dumb) question but I fear upgrading (every application) will break something working right away.
TIA
tonySo, my question:
can I install DW CS4 + ADDT or DW CS5 (alone) on the same system?
Do they interfere each other?
Yes, you can install them on the same system, and no, they won't interfere with each other. Each version of DW installs as a complete, standalone application.
But it could happen that I will need to edit a page of a website with a different verison of DW. Is there any problem to do this?
No there's not a problem. -
CS2 & CS4 Extended on the same system
I have downloaded the CS4 Extended Trial but did not uninstall CS2 before doing so. Can these both exist on the same system without issues?
Thanks!Yes. I have Photoshop 2.5.1, PS 6, PS 7, CS, CS2, CS3, CS4 all playing nice together on the same machine.
-
Final Cut Pro X and 7 on same system
I am using Final Cut Pro 7 and I was not very keen on Final Cut Pro X when I tried it out.
However, I have just learned that it could be advantageous workwise if I am prepared to work on some FCPX projects.
I'm just curious to know if it is safe to run both applications on the same system; e.g. do they share preference files? Do they use the same plugins folder etc.?
I know that in the past (and I mean the distant past) I have had problems trying to run different versions of the same software in the same machine and I'm too comfortable with FCP7 to just leap into working with an application about which I got an unfavourable impression and which many fellow professionals have told me instigated a move to Premiere.
Can somebody give me some definitive advice, please?Alf Megson wrote:
I
I'm just curious to know if it is safe to run both applications on the same system; e.g. do they share preference files? Do they use the same plugins folder etc.?
Yes it's safe and no they don't use same plug-ins.
I'm running FCS3 and FCPX, Motion5, Compresor 4 on two systems. No problems.
Bets would be to follow these steps – the same start-up explanation.
Russ -
Risks of two development groups in the same system
Hi,
I need your help.
I'm looking for a document about the risks having two development groups in the same system.
The point is: An external party will come soon and start the implementation of a mini H2R in the same system as we (the internal team) are working for SD, MM, CO,... As the developments are cross-client, I'm asked to write a document explaining the risks in such cases like:
conflicts: working on the same objects
authorisations: each group should be assigned to different packages
planning: the go-live should be at the same time
transports: there can be conflicts on a transport-level
If you have any documentation that can help me, please let me know.
Kind regards, Gilles.I hope this is not considered a link farm:
Potential conflicts between already released transports:
Program to validate transport sequence
Uwe Schieferstein's blog on "Dangerous Liaisons in User-Exits and How to Avoid Them":
/people/uwe.schieferstein/blog/2008/11/11/dangerous-liaisons-in-user-exits-and-how-to-avoid-them
Just two of many things to observe...
Thomas -
Hi All,
Is it not able to execute ALE in the same system but in different clients. I tried it but there is some probelm with the IDocs passed. I do the configuration in client X in the same system with multiple clients. Since ALE configuration is cross client all the changes appear in client Y. I configure everything correctly and use MATMAS as the message type. I create the material through MM01 and send the material through BD10. The IDoc get transferred without any problems. But after I get the IDOC in client Y being the recieveing system it says that the Partner profile is not present. But if i try to distribute the model view once again it says that it is already done...Is ALE not possible within clients of the same machine.. or where am i doing wrong...
Thanks in Advance,
SudhiHi,
Thanks a lot for the inputs... i did generate the partner profile in the recieving system as well now the error has chaged i recieve the IDoc without any problems and also i can see the data in the segment. I am using MATMAS as the message type and in the segment E1MARAM and E1MAKTM i can see the data as well but now the status code in WE02 is '51' which says that the Application Document not posted and gives additional information saying that the Function Module AFS_RETAIL_ARTMAS_IDOC_INPUT is not allowed. I am on version 4.7 .anybody knows how to get out from here ?
Maybe you are looking for
-
FSCM Dispute Open items with Special GL account (SPL GL indicator)
Hi All, We are implementing dispute management in SAP 5.0 . When we create dispute case in FBL5n tx, a error message appears A dispute case must always contain at least one receivable. For example, you cannot inlcude only credit memos or
-
Header Row Repeating Erratically
Hi, I have a problem with a dynamic table using Adobe Lifecycle Designer 8.0 and Adobe Acrobat Professional 8.0. The table starts with a header row and a single row. The user can add additional rows and the table flows onto multiple pages. Everything
-
I was told a safety precaution was to delete my original account through users & groups. So I created a new administrator user and erased my old one. There are currently two users aside from guest user because I accidently created two new ones. I no
-
Best strategy to import users and their content
Hello, Just seting up a Mac mini / Mountain Lion server. I have 2 iMacs, 2 Macbook Pros + may be others in the future. This is a first time server setup. The iMacs are connected to the server through Powerline Ethernet adapters. 1. What would be the
-
Install a window shared printer
Apology if i posted it at the wrong forum. i had share a printer in one of my window PC. The PC is joined to domain ABC. To add a printer, i go to system preferences>Print&fax>+>windows>click my domain that ABC. This is where i faced my problem. I ca