Close Notification is triggering at the completion of each path

In my company we are using BRF+ flat rule for routing rule in process id: SAP GRAC Access Request. The problem is when each path is completed the end user receives close notification and we want user to receive close notification only at the end of request. For example: request splits into two paths, (1) training verification, (2) 2nd level role approval – when training verification is completed user receives close notification and also he receives after the completion of 2nd level role approval path.
Highly appreciate your response in this regard.

Colleen,
FYI!
close notification text "
The following access has been processed from access request %REQNO% that was submitted on your behalf:
%PROVISIONING_WITHOUT_PASSWORD%
Please note that some of your access may still be pending approval. You can check the status of your request by logging into SAP ARM"
I don't see this template ID GRAC_AR_CLOSE linked to any recipient ID in any stage notification settings and looking at the above text message the person who build this workflow knows that this notification triggers at each path.
Let me know, if I am missing anything.
Regards,
Mohammed

Similar Messages

Event to be triggered after the completion of ProcessChain

Hi,
I have a scenario in Process chain. After successful completion of the proces chain,i shall trigger an event for other system (XI).
Please help me in this regard, how to handle the event.
Thanks,
ILYAS

Hi,
On the successful completion of the last step, have another ABAP program that would raise an event using the following function module.
call function 'BP_EVENT_RAISE'
       exporting
            eventid                = i_eventid
            eventparm              = i_eventparm
        TARGET_INSTANCE        = ' '
       exceptions
            bad_eventid            = 1
            eventid_does_not_exist = 2
            eventid_missing        = 3
            raise_failed           = 4
            others                 = 5.
Hope this helps.
Regards,
Kalyan

Is there a way to auto check a check box triggered off the completion of a specific text box?

I am using Conga Composer. I'm hoping when information is filled into a specific text box in a pdf, it will auto check a specific checkbox. Any script ideas? Or if this is even possible? I've seen scenarios for the reverse, but my situation requires this particular flow.

I highly doubt this process is going to trigger any of these scripts, if that's what you're planning...
What you can do add a doc-level script that will execute when the file is opened and set the check-box based on the text field's value, in addition to the custom keystroke code. That would look something like this:
this.getField("CheckBox").checkThisBox(0, this.getField("TextBox").value!="");

Ticket close notification

Hi Team,
We are facing issue with ticket close notification. Could you Please look into this. As of now Except from end user no one receiving ticket close notification. Please, find the notification setting below:-
Thanks,Deepak
This topic first appeared in the Spiceworks Community

hi
sami
WHat are the Pros and Cons if the Quality notification is keep open for ever but all tasks are complete
Notifcations are Niothing but communications.These are alwaz not intended for complain.they can be informative also.
As you know that Notifications are for analysis.You can certainly keep them open with all tasks close.
You can close any notifcation from T code:QM02 or QM10.
If you do not close the notification the signal lights in QM10 will show red as per priority set by you.
There is no harm keeping notification open.
But there are no repercations even you close it.because any notification you can put in process again.
I hope it's clear to you
Regards
Sujit

Table or function module from for complete physical file path?

Hi All,
I know the Logical file and Logical path name, i can see the complete path also from logical path name i.e. the physical file address through transaction FILE, e.g. /USR/TMP/ , but i want to display this path in one of the report output,
so please help me with the table or the function module which can give me the complete physical file path.
I checked the the table ADMI_FILES but it contains the file name or the Logical path name but the complete physical file address e.g /USR/TMP?, like this is not available. More over i tried function module file_get_name, still the physical address is not correct one, it is giving same address for all logical paths.
Kindly Guide me for this
Regards,
Nikesh Kumar

try sth like this:
    CALL FUNCTION 'FILE_GET_NAME_AND_LOGICAL_PATH'
      EXPORTING
        LOGICAL_FILENAME = LDS_NAME
            IMPORTING
        FILE_NAME        = sfile
        LOGICAL_PATH     = pth
      EXCEPTIONS
        FILE_NOT_FOUND   = 01.
    IF SY-SUBRC NE 0.
      MESSAGE E300(BD) WITH LDS_NAME.                         " TODO MG
    ENDIF.
                                                                                SELECT single PATHEXTERN FROM path INTO expth
           where pathintern = pth.
    replace '<FILENAME>' with space into expth.
    concatenate expth '/' sfile into sfile.
    open dataset sfile for output in text mode encoding default.
A.

HT1849 I have received notification that the "Complete My Album", Music Speaks by Candice Glover is now available to download. I have three devices that are all enabled to receive automatic downloads. My problem is the same on all three devices. Only

I have received notification that the "Complete My Album", Music Speaks by Candice Glover is now available to download. I have three devices that are all enabled to receive automatic downloads. My problem is the same on all three devices.
Only 0.05 minutes download on each song with the exception of the original song purchase: I Am Beautiful. What needs to be done to solve this problem?

It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this.

I've downloaded ADE 4.0.3, apparently successfully, and I 'Close the 'Completed' window. But, when I attend to run the program, I get an hourglass for about 2 seconds and then ... ... nothing! Clearly I can't authorize my computer for download. Ideas?

I've downloaded ADE 4.0.3, apparently successfully, and I 'Close the 'Completed' window. But, when I attend to run the program, I get an hourglass for about 2 seconds and then ... ... nothing! Clearly I can't authorize my computer for download. Ideas?

Try restarting your machine and Launch ADE again

Triggering a report after the completion of processing the session

Hi Friends,
I want to know how to trigger an report after the completion of processing the session.
Thanks,
Raj

Hi
        SELECTION-SCREEN                               *
PARAMETERS: p_name     LIKE apqi-groupid,
            p_datum    LIKE apqi-credate,
            p_time     LIKE apqi-cretime,
            p_event    LIKE tbtco-eventid.
             DATA                                     *
DATA: fl_job_ok TYPE c,
      fl_event TYPE c,
      cont_sysubrc_6 TYPE i.
DATA: start_time LIKE sy-uzeit,
      start_date LIKE sy-datum,
      time       LIKE sy-uzeit,
      delta_time TYPE i.
DATA: apqitab LIKE STANDARD TABLE OF apqi WITH HEADER LINE.
DATA:
btc_running       LIKE tbtco-status VALUE 'R',
btc_ready         LIKE tbtco-status VALUE 'Y',
btc_scheduled     LIKE tbtco-status VALUE 'P',
btc_released      LIKE tbtco-status VALUE 'S',
btc_aborted       LIKE tbtco-status VALUE 'A',
btc_finished      LIKE tbtco-status VALUE 'F',
btc_put_active    LIKE tbtco-status VALUE 'Z',
btc_unknown_state LIKE tbtco-status VALUE 'X'.
                     START-OF-SELECTION                              *
START-OF-SELECTION.
DATA: a VALUE '1', b.
Controllo esistenza job:
start_time = sy-uzeit.
start_date = sy-datum.
DO.
    apqitab-creator = sy-uname.
    CALL FUNCTION 'BDC_OBJECT_SELECT'
      EXPORTING
        name                   = p_name
        datatype               = 'BDC'
    CLIENT                 = SY-MANDT
        date_from              = p_datum
    DATE_TO                =
        time_from              = p_time
    TIME_TO                =
       QSTATE                 = 'F'
        session_creator        = apqitab-creator
      TABLES
        apqitab                = apqitab
      EXCEPTIONS
        invalid_datatype       = 1
        OTHERS                 = 2.
    IF sy-subrc <> 0.
      fl_job_ok = space.
    ELSE.
      LOOP AT apqitab.
        CASE apqitab-qstate.
          WHEN 'F'.          fl_job_ok = 'X'. EXIT.
          WHEN 'E'.          fl_job_ok = 'E'. EXIT.
          WHEN OTHERS.       fl_job_ok = space.
        ENDCASE.
      ENDLOOP.
      IF fl_job_ok = 'X' OR fl_job_ok = 'E'.
        EXIT.
      ENDIF.
    ENDIF.
    IF start_date <> sy-datum.
      start_time = sy-uzeit.
    ENDIF.
    time = sy-uzeit.
    delta_time = time - start_time.
    IF delta_time > 1800.
      EXIT.
    ENDIF.
    REFRESH apqitab.
ENDDO.
IF fl_job_ok = 'X'. " Trovato JOB
    fl_event = 'X'.
    IF fl_event = 'X'.
Attiva evento
      CALL FUNCTION 'BP_EVENT_RAISE'
        EXPORTING
          eventid                = p_event
        EXCEPTIONS
          bad_eventid            = 1
          eventid_does_not_exist = 2
          eventid_missing        = 3
          raise_failed           = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
      ELSE.
        MESSAGE i999(zfagm) WITH p_event 'is successfully actived'(002).
      ENDIF.
    ELSE.
      MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
    ENDIF.
ELSE.
    IF fl_job_ok = space.
      MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
    ELSE.
      MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
    ENDIF.
ENDIF.
Max

SCSM 2012 Notifications Re-Triggering

Hello Everyone,
I am running into a frustrating issue and could use some help! Whenever I make an update to a Request Offering for a Service Request class item it re-triggers our Service Request completion notification for all Work items that were created using that
Request Offering. The Service Request notification is set to send when the status of a Service Request changes from "Does not equal" Completed, Failed, or Cancelled to "Equals" Completed, Failed, or Cancelled, but these notifications
are triggering for work items that have long since been completed with no recent status changes, minutes after updating the corresponding Request Offering (like adding a new user prompt).
Does anyone have any insight into this?
Thanks!
Lex

I'm making an educated guess here, but I believe there are two things causing this behavior. First, do a quick test for me.
Open a completed, cancelled, or failed service request and change the description (just add "test" to the description or something..just enough to change it). Is the notification re-sent?
If the notification is re-sent, your notification criteria is probably formed incorrectly. Post it here and we'll take a look at it.
Furthermore, if that is indeed the problem, I'll give you some background on why changing a request offering can trigger service request notification subscriptions (and what you can do to avoid it in the future).

Notifications not going to the contact person

Hello Friends,
Scenario - When i create an RFI Customer activity in a CSR and set its status to 'Requested Customer'', a notification (more information is required) goes to the contact person and the team lead of CRO (Customer Responsible Organization). If the customer does not reply for 3 days (in case of a High Severity CSR) or 7 days (in case of severities other than High), then reminder notifications (more information required - reminder) get triggered which go to the contact person and the team leads of CRO.
Problem - In the first case,the notification (more information is required) goes to the contact person and the team lead of CRO (Customer Responsible Organization) where as in the second case, the reminder notifications do not go to the contact person, but they go to the team leads of CRO.
Analysis - There are 2 workflows that get triggered when the RFI Customer activity in a CSR and set its status to 'Requested Customer''. The first one sends the notification (more information is required) to the contact person and team leads of CRO immediately. The other workflow checks whether the customer has replied for 3 days (in case of a High Severity CSR) or 7 days (in case of severities other than High), and then sends the notification to the contact person and team leads of the CRO. I have checked the bindings, tasks, receiver rules and the methods in both these workflows. They are exactly similar. The only difference in these workflows is the wait step added in the second workflow.
Do you have any clue as to what is the reason behind the second workflow not sending the notifications to the contact person ?
Appreciate your help and timely response.
Thanks
Prashant

Hello Rick,
Thank you for your response. Here are the answers to your queries -
Question -->Is a mail being sent to the same email address in both workflows with SendMail, and only working in one of them?
Answer --> Yes
Question -->There must be some other difference other than the wait step.
Answer --> The difference between the 2 workflows is mentioned step by step as below -
Workflow for which the notifications are sent to the contact person and team lead of CRO
Step 1 --> Condition step whether the email address exists or not.
If No --> Sends a mail to the LDA (Local Database Administrator) to maintain the email address of the contact person
If Yes --> Goto Step 2
Step 2 --> Condition step whether the Severity of the CSR is High or not
If Yes --> Send step (to send the email notifications to the contact person and team lead of CRO)
If No --> Send step (to send the email notifications to the contact person and team lead of CRO)
Workflow for which the notifications are not sent to the contact person and team lead of CRO
Step 1 --> Condition step whether the email address exists or not.
If No --> Sends a mail to the LDA (Local Database Administrator) to maintain the email address of the contact person
If Yes --> Goto Step 2
Step 2 --> Condition step whether the Severity of the CSR is High or not
If High - Wait Step (waits for 3 days before sending the notifications to the contact person and team lead of CRO)
If Other - Wait Step (waits for 7 days before sending the notifications to the contact person and team lead of CRO)
Step 3 --> Condition step to check the CSR Status (to check whether the customer has replied or not)
If Yes(customer replied) --> End workflow
If No (customer has not replied)--> Send step (to send the email notifications to the contact person and team lead of CRO)
Question -->How have you implemented the wait step? Does it fetch the address before or after the wait?
Answer --> The email address is fetched at the very first step.
Question -->What happens if you make a test workflow with just the Sendmail step and send to the same address?
Answer --> The notification goes to the same email address.
Kindly let me know if the information that i have provided is comprehensive enough. Your help will be deeply appreciated.
Thanks
Prashant

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?

With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?
I have developed a form with fields hidden by default, that become visible based on box ticked or radio button selections.
My problem is that, when I close the form and re-open it, it comes back to it's default presentation, regardless of the information already recorded in the form (including in the now hidden fields.
How to correct that
Thanks in advance for any hint you can provide.

I've had the same problem. This solved it...
Go to the "Form properties..." in the File-menu. Select "Run-time" to the left and in the box "Scripting" Preserve scripting changes to form when saved: choose Automatically (Script-based state changes are saved locally in an insecure fashion. This option cannot be used for certified forms).
Hope it works for you to...

Creating a pop-up in Acrobat X that is triggered when the PDF is opened.

Hello all,
I am wanting to create a pop-up that is triggered when the PDF is opened.
The problem I am facing is that our customers are filling out the packet , but are not using the purple "Submit" button located at the top of the page to submit the form to us. They are instead printing out the form and faxing it to us, or scanning and emailing the packet, which defeats the whole purpose of it being a fillable, distributed pdf.
The email invitation that they receive is a bit wordy so I have have pared that down as well. To be honest with the amount of "Read this first" pop ups that we are exposed to daily I think that our customers are simply not reading the instructions properly.
There was a post here in the forums but the expanation was for Acrobat 7 or 8.
Any help is appreciated.

Thank you for the quick response George. I guess a better way communicate what I need to accomplish is "how"
I went to the toolbar on the right, then "javascript", then "Document Java Scripts". That opened a window that had me name the script, then add it, then put in the scripting (see below). I do not know how to "place it in a document-level JavaScript (outside of a function definition) or in the initial page's Page Open event."
This is the script I am attempting to use.
var message = "When you have completed filling out the Tax Organizer, click on the purple "SUBMIT" button at the top of the page. This will automaticall submit your Tax Organizer for you. Be sure to print a copy for your files"
app.alert(msg,3);
If you could provide some step by steps that would be super.
I am wanting this pop-up box to open and the client will have to then click on the "ok" button to make it dissapear so that they can then fill out the PDF.
The "Submit" button is auto created for me when I choose to distribute the form, I am unaware of any way to move it.
I feel that my issue is a elementary one, I am currently working through the Adobe Classroom in a Book lessons as all my acrobat skills have been self taught.

HT3919 In the past was able to adjust the memory for each individual application, my Illustrator CS5 appears is doesn't have enough memory to complete a particular project. How do I boost the amount of memory that Illustrator uses so I can complete my pro

In the past I have always been able to adjust the memory of each individual application,
my Adobe Illustrator CS5 appears that is doesn't have enough memory to complete a particular project.
How do I boost the amount of memory that Illustrator uses so I can complete my project?

With OS X, it automatically allocates RAM and it can't be allocated manually.
What model Mac do you have and what OS X version is it running. Your profile shows a PowerMac and OS 10.6.8. A PowerMac can't run OS 10.6.8. It's max OS is 10.5.x
How much RAM is installed in your Mac? You need to max out the RAM and close other open apps if you are having problems with Illustrator.
 Cheers, Tom

Close PO's with status Transction complete programatically

Hi all,
We are on SRM 5.0..I need to programatically close some PO's in the system which are in status "Transaction complete".Is there any std FM which can be used to close such PO's?
Thanks!

Hi
Try these two FMs BBP_PROCDOC_GETDETAIL, BBP_PROCDOC_UPDATE and BBP_PROCDOC_STATUS_CHANGE
Regards
Virender Singh

Close Notification is triggering at the completion of each path

Similar Messages

Maybe you are looking for