Cloudscape port conflict

Hi,
I just installed J2EE 1.3.1 on a solaris machine and was able to start J2EE server successfully. However, when
I issue
cloudscape -start
it produces the following run-time error:
Fri Aug 30 16:59:18 EDT 2002: [RmiJdbc] Starting Cloudscape RmiJdbc Server Version 1.7.2 ...
Fri Aug 30 16:59:19 EDT 2002: [RmiJdbc] COM.cloudscape.core.JDBCDriver registered in DriverManager
Fri Aug 30 16:59:19 EDT 2002: [RmiJdbc] Binding RmiJdbcServer...
Fri Aug 30 16:59:19 EDT 2002: [RmiJdbc] No installation of RMI Security Manager...
Got Exception: Port already in use: 1099; nested exception is:
java.net.BindException: Address already in use
java.rmi.server.ExportException: Port already in use: 1099; nested exception is:
java.net.BindException: Address already in use
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:243)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:178)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:382)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:116)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:145)
at sun.rmi.registry.RegistryImpl.setup(RegistryImpl.java:92)
at sun.rmi.registry.RegistryImpl.<init>(RegistryImpl.java:78)
at java.rmi.registry.LocateRegistry.createRegistry(LocateRegistry.java:164)
at RmiJdbc.RJJdbcServer.register(RJJdbcServer.java:189)
at RmiJdbc.RJJdbcServer.main(RJJdbcServer.java:295)
Caused by: java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:321)
at java.net.ServerSocket.bind(ServerSocket.java:308)
at java.net.ServerSocket.bind(ServerSocket.java:266)
at java.net.ServerSocket.<init>(ServerSocket.java:182)
at java.net.ServerSocket.<init>(ServerSocket.java:94)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createServerSocket(RMIDirectSocketFactory.java:27)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createServerSocket(RMIMasterSocketFactory.java:306)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:615)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:231)
... 9 more
My question is: how do I change the port settings in cloudscape?

Hi,
the documentation describes in detail how to change the ports used by Cloudscape.
--> %J2EE_HOME%/doc/release/ConfigGuide.html
Daniel :-)

Similar Messages

A port conflict was detected in the server configuration

Hi
Iam getting following error message "A port conflict was detected in the server configuration" error when I run startWeblogic.sh. I checked same in config.sh file about repeatation of port for channel sip but it is not repeated. Please help me out
I have run nodemanager successfully on 5556 port but I have admin server starting problem I tried both $DOMIAN_HOME/startWeblogi.sh and $DOMAIN_HOME/bin/startWeblogic.sh location and I am getting same issue.
Error message:
####<May 4, 2011 10:43:23 AM IST> <Info> <WebLogicServer> <HSCHARTOMR0112> <> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1304486003957> <BEA-000000> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<May 4, 2011 10:43:24 AM IST> <Notice> <Log Management> <HSCHARTOMR0112> <> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1304486004002> <BEA-170019> <The server log file /u01/BEA/MW_HOME/user_projects/domains/base_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Log Management> <HSCHARTOMR0112> <> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1304486004005> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Diagnostics> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004044> <BEA-320001> <The ServerDebug service initialized successfully.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004141> <BEA-002622> <The protocol "t3" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004141> <BEA-002622> <The protocol "t3s" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004141> <BEA-002622> <The protocol "http" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004142> <BEA-002622> <The protocol "https" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004142> <BEA-002622> <The protocol "iiop" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004143> <BEA-002622> <The protocol "iiops" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004144> <BEA-002622> <The protocol "ldap" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004144> <BEA-002622> <The protocol "ldaps" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004147> <BEA-002622> <The protocol "cluster" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004148> <BEA-002622> <The protocol "clusters" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004152> <BEA-002622> <The protocol "snmp" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004152> <BEA-002622> <The protocol "admin" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004153> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004157> <BEA-002622> <The protocol "sip" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004158> <BEA-002622> <The protocol "sips" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004159> <BEA-002622> <The protocol "sips-admin" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004164> <BEA-002622> <The protocol "diameter" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004165> <BEA-002622> <The protocol "diameters" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004166> <BEA-002622> <The protocol "diameter-sctp" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Emergency> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004185> <BEA-002633> <A port conflict was detected in the server configuration. The server is configured to listen on two ports that have the same port number and IP address. Channel "sip" address "sip://fe80:0:0:0:fcff:ffff:feff:ffff:5006" conflicts with channel "sip" address "sip://fe80:0:0:0:fcff:ffff:feff:ffff:5006".>
####<May 4, 2011 10:43:24 AM IST> <Critical> <WebLogicServer> <HSCHARTOMR0112> <AdminServer> <main> <<WLS Kernel>> <> <> <1304486004186> <BEA-000362> <Server failed. Reason: Network configuration error, check log for details.>
####<May 4, 2011 10:43:24 AM IST> <Notice> <WebLogicServer> <HSCHARTOMR0112> <AdminServer> <main> <<WLS Kernel>> <> <> <1304486004281> <BEA-000365> <Server state changed to FAILED>
####<May 4, 2011 10:43:24 AM IST> <Error> <WebLogicServer> <HSCHARTOMR0112> <AdminServer> <main> <<WLS Kernel>> <> <> <1304486004281> <BEA-000383> <A critical service failed. The server will shut itself down>
####<May 4, 2011 10:43:24 AM IST> <Notice> <WebLogicServer> <HSCHARTOMR0112> <AdminServer> <main> <<WLS Kernel>> <> <> <1304486004283> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<May 4, 2011 10:43:24 AM IST> <Info> <WebLogicServer> <HSCHARTOMR0112> <AdminServer> <main> <<WLS Kernel>> <> <> <1304486004283> <BEA-000236> <Stopping execute threads.>
Thanks,
Phani
Edited by: Phani on 3 May, 2011 10:28 PM
Edited by: Phani on 4 May, 2011 1:25 AM
Edited by: Phani on 4 May, 2011 3:03 AM

Refer:- wlcs_server1 won't start - sipchannel port conflict
-Akshay

OVM Manager w 2nd NIC = A port conflict was detected in the server config

Greetings,
ENV: Oracle VM 3.1.1.544.
Issue: We had to add/setup a second interface/NIC on a second subnet on Oracle VM Manager. Now, when ovmm is started, we get: <A port conflict was detected in the server configuration. The server is configured to listen on two ports that have the same port number and IP address. Channel "https" address "https://fe80:0:0:0:26b6:fdff:fec8:f4b1:7002" conflicts with channel "https" address "https://fe80:0:0:0:26b6:fdff:fec8:f4b1:7002".>
BEA Docs (http://docs.oracle.com/cd/E13222_01/wls/docs92/messages/Server.html)
BEA-002633: Emergency: A port conflict was detected in the server configuration. The server is configured to listen on two ports that have the same port number and IP address. Channel "channel1" address "url" conflicts with channel "channel2" address "url".
Action: Please ensure that the address identities [ListenAddress and ListenPort combinations] are distinct and unique.
Would you happen to know which file, (i.e. config.xml), and which lines (i.e. <listen-address>) we need to edit, with the correct syntax to add a second IP address/subnet to our WebLogic server?
Thank you in advance for your support!
Regards,
Roddy

Thank you for your support!
1. What version of Linux? OL 62 x64
2. Have you set a separate DNS name for the second interface IP? No, although we are using/setup dnsmasq on the second interface/eth3 to dish up DNS on the private network. DNS name resolutions works like a charm on the private vlan.
3. Do you still have a single default route or are you trying to use more than one? The second interface is in a private unroutable network. the front end network/NIC eth0 is routable and on a public network.
Public/Private Network Setup:
* Public network with oracle vm manager on eth0/10.4.x.x. This is how we access the ovm manager GUI, and ssh to manager, and via manager ssh to the dom0s. The dom0s are on private nonroutable networks available via the manager host's eth3.
* Private networks accessible via the oracle vm manager host eth3/802.1q/VLAN xxx. this is the server management network channel, this vlan is not routable. We have two other vlans, i.e. heartbeat and live migration, both also not routable.
Thoughts?

N1 and port conflict

Hi all,
i try to install N1 1.3 but i have an error.
Solaris 10 U6
There is no 8083 port in /etc/services.
Nothing in netstat -an and nothing in lsof.
Could you help me please?
N1SM Installer (version 1.3 on SunOS)
1. Install OS packages. [Completed]
2. Install Expect. [Completed]
3. Install IPMI tool. [Completed]
4. Install JDK 1.5. [Completed]
5. Install service provisioning components. [Partially Run]
6. Install OS provisioning components. [Not Completed]
7. Copy DHCP configuration file. [Not Completed]
8. Install user interface components. [Not Completed]
9. Install service container components. [Not Completed]
10. Install N1 System Manager. [Not Completed]
Failed Step: Install service provisioning components.
The following is a portion of the installer
log which may indicate the cause of the error.
If this does not indicate the cause of the
error, you will need to view the full log
file. More information on how to do that is
available below.
Checking port 1130 using netstat
Checking port 1131 using netstat
Checking port 8083 using netstat
Checking port 8083 using telnet
The installer has detected that there may be a port conflict with current running processes. Please stop the processes which are using the following conflicting ports: 8083
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.1461.
t. Try this step again (correct the failure before proceeding)
x. Exit
Enter selection: (t/x)

N1SM is EOL and if you really must install it, the latest is 1.3.3 + patches, please do install in a CLEAN, DEDICATED machine (which should relief you of your problem).
N1SM approaches EOSL - meaning it will not be supported soon, or IF, then for large amount of $$$
I strongly suggest you to talk to your Sun peers for xVM Ops Center 2.0 deployment, which replaced N1SM 2 years ago
L

Port conflict error when trying ot run the page.

Hi ,
Below is the error message whern I try to run the page.How to resolve it.
I tried checking tools->preferences->embedded oc4j->Host name to default local ip address and local host name
Another trial was : open Task Manage ->Process tab..if there will be two process jdevw and javaw. Terminated those process and then start JDeveloper and run the page,it should work , but i could find only java.exe running.
Appreciate your help.Thanks.
**** JMS port conflict detected. The JMS port will be reassigned to port 9236.
[Starting OC4J using the following ports: HTTP=8995, RMI=23892, JMS=9236.]
D:\MC\oajdev\jdevbin\jdk1.4.2\bin\javaw.exe -client -classpath D:\MC\oajdev\jdevbin\j2ee\home\oc4j.jar;D:\MC\oajdev\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:D:\MC\oajdev\jdevbin\jdev\appslibrt\ojdbc14.jar;D:\MC\oajdev\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 com.evermind.server.OC4JServer -config
D:\MC\oajdev\jdevhome\jdev\system9.0.3.5.1312\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Fatal Error: Unable to write to the transaction log (/D:/MC/oajdev/jdevhome/jdev/system9.0.3.5.1312/oc4j-config/log/transaction.state), possible reasons for this are that Orion lacks permission to write to the file, or that another instance of the server is already running with this configuration (most common): Unable to alter transaction log
Process exited with exit code 1.

You have other JDev session running.
Probably your first JDev session was not terminated gracefully.
Close ALL JDev sessions. Go to Task Manager and kill any process related to JDev.
Then open JDev again. You should not get this error message again.
PS. Despite of this message, you will be able to continue with your work.

Cloudscape port config on j2ee 1.4beta

i am trying to configure the cloudscape port. i've seen lots of docs about how to do this with 1.3 but i can't quite figure it out for 1.4beta.
here's what i've done:
1: change bin/launcher.xml. it now has a
<arg line="-port 1098"/>
in cloudscape-start target
2: <value="jdbc:rmi://localhost:1098/jdbc:cloudscape:"/>
in cloudscape-stop target
3: ..key="ij.protocol" value="jdbc:rmi://localhost:1098/jdbc:cloudscape"
...key="ij.database"
value="jdbc:rmi://localhost:1098/jdbc:cloudscape:CloudscapeDB;create=true"
in cloudscape-isql target.
4: change config/server-config.xml so all of its cloudscape url's point to jdbc:cloudscape:rmi://localhost:1098/CloudscapeDB
it seems to startup cloudscape ok on 1098, but when running "setup deploy", the appserver can't connect to cloudscape. i get the suspicion that it's still looking on the default port=1099 because when i run cloudscape -isql it says its using the default url, not the one i had specified in the launcher.xml file.
how can i be positive that cloudscape is running on 1098?
(i just use netstat -noa to check for ports in use, but this doesn't guarantee that it is succesfully installed).
where does the server get the db url, if not from the above metioned 2 files? i'm stuck...
thanks,
derek.

Could someone suggest a solution for this problem. I am trying to do the same thing and am getting stuck. What I am trying to do is this :
1) Run Cloudscape on a different port (2001) instead of 1099.
2) Change the J2EE server configuration by modifying resource.properties file so that the DB source is now rmi://localhost:2001/CloudscapeDB
3) The J2EE server starts up fine.
4) However when I try to deploy the PetStore application, there is an exception saying that connection refused.
So if someone has been able to successfully deploy the petstore application on clouldscape running at a different port than 1099 (default), could you send some suggestions.
Thanks,
Bon Bon

AEBS port conflict? Intermittent problem connecting to Gracenote CDDB

Hi all,
I posted a similar question in the iTunes forum, but the more I troubleshoot, the more I think this is an AEBS issue.
Whilst importing CDs into iTunes, I've had difficulty getting the track listing. I've switched WiFi connections (borrowing my neighbour's) and this resolves the problem. Unfortunately, this means I'm not operating on my local network, which is not acceptable.
Still on my AEBS, I make repeated attempts, until finally I'm able to connect to CDDB and get the tracklisting.
What's causing this? I wonder if there's a port conflict that I need to address. Any ideas?
Steve

Hiya,
Resetting the AEBS gave me a temporary reprieve, but it's failing to connect to Gracenote CDDB again.
I tried unplugging a VoIP gateway which is connected to the same router, but no difference. Also unplugged an AirPort Express which I use for AirTunes.
Anyone else had similar difficulty with CDDB??
Steve

R12 OPMN port Conflict with RAC CRS

i'm facing problem with port conflict.
when i stop ora.linux1.ons and ora.linux2.ons
iam able to start application services and when ora.linux1.ons and ora.linux2.ons are up and running im not able to start application tier services.
Please help
Thanks

What is the port used by the application and by ora.linux1.ons and ora.linux2.ons?
ons.conf
localport=6100 # line added by Agent
allowgroup=true
usesharedinstall=true
remoteport=6200 # line added by Agent
nodes=linux1:6200,linux2:6200 # line added by Agent
~
i have configured RAC on R12.1.1 db-11gr2.
im trying to start application tier services but when i o that
sh adstrtal.sh apps/apps
You are running adstrtal.sh version 120.15
The logfile for this session is located at /d01/oracle/PROD/inst/apps/PROD_linux 1/logs/appl/admin/log/adstrtal.log
Executing service control script:
/d01/oracle/PROD/inst/apps/PROD_linux1/admin/scripts/adopmnctl.sh start
script returned:
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 2
adopmnctl.sh: check the logfile /d01/oracle/PROD/inst/apps/PROD_linux1/logs/appl /admin/log/adopmnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/PROD/inst/apps/PROD_linux1/admin/scripts/adalnctl.sh start
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Listener APPS_PROD has already been started.
adalnctl.sh: exiting with status 2
adalnctl.sh: check the logfile /d01/oracle/PROD/inst/apps/PROD_linux1/logs/appl/ admin/log/adalnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/PROD/inst/apps/PROD_linux1/admin/scripts/adapcctl.sh start
script returned:
You are running adapcctl.sh version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
adapcctl.sh: exiting with status 2
adapcctl.sh: check the logfile /d01/oracle/PROD/inst/apps/PROD_linux1/logs/appl/ admin/log/adapcctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/PROD/inst/apps/PROD_linux1/admin/scripts/adoacorectl.sh start
script returned:
You are running adoacorectl.sh version 120.13
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 2
adoacorectl.sh: check the logfile /d01/oracle/PROD/inst/apps/PROD_linux1/logs/appl/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/PROD/inst/apps/PROD_linux1/admin/scripts/adformsctl.sh start
script returned:
You are running adformsctl.sh version 120.16
Starting OPMN managed FORMS OC4J instance ...
adformsctl.sh: exiting with status 2
adformsctl.sh: check the logfile /d01/oracle/PROD/inst/apps/PROD_linux1/logs/appl/admin/log/adformsctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/PROD/inst/apps/PROD_linux1/admin/scripts/adoafmctl.sh start
script returned:
You are running adoafmctl.sh version 120.8
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 2
adoafmctl.sh: check the logfile /d01/oracle/PROD/inst/apps/PROD_linux1/logs/appl/admin/log/adoafmctl.txt for m ore information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/PROD/inst/apps/PROD_linux1/admin/scripts/adcmctl.sh start
script returned:
You are running adcmctl.sh version 120.17.12010000.3
Starting concurrent manager for PROD ...
Starting PROD_1231@PROD Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
adcmctl.sh: check the logfile /d01/oracle/PROD/inst/apps/PROD_linux1/logs/appl/admin/log/adcmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/d01/oracle/PROD/inst/apps/PROD_linux1/admin/scripts/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 120.3
Validating Fulfillment patch level via /d01/oracle/PROD/apps/apps_st/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for PROD on port 9300 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
All enabled services for this node are started.
adstrtal.sh: Exiting with status 0
adstrtal.sh: check the logfile /d01/oracle/PROD/inst/apps/PROD_linux1/logs/appl/admin/log/adstrtal.log for mor e information ...
[applmgr@linux1 scripts]$
Thanks
Edited by: Maverick on Dec 31, 2010 4:11 AM

Oracle ApplicationServer 10g Port Conflict Error

Hi,
We had installed both the Database & Application Server 10g on a Single Machine When we restart the system & tried to Opmnctl Startall its says no port Available.XML files say port range is 10000- as specified in Oracle AS Installation guide.
I think it is of Port Conflict can someone help me to resolve.
Thanks in Advance.
Regards,
Viswa

Wich version and type of OAS you install?
maybe problem could be
the listener.
or ons port.
if is the first.
change the listener.ora of the app server, and change the tnsnames.ora
if is the second
edit the opmn.xml and change the reques, remote and local port, just ad one to the port.
Regards.

Oc4j, jdeveloper and apache, port conflicts ?

Hi all,
I am currently in the process of deploying my first EJB on Oracle 9i AS.
I have successfully installed oc4j.zip and set the login credentials.
I am however, unable to connect to the index page of the OC4J server from any computer besides the server.
My URL is http://prams_nt_03:6666 and this works on the server. The reason for it being 6666 is that I have changed it to avoid conflicts with the oc4j server. I have changed it in the default-web-site.xml file. There is a danger of conflict because I want to access the OC4J server behind Apache.
I have also created the oc4j.conf file, which httpd.conf looks at :
<IfModule mod_proxy.c>
ProxyRequests On
ProxyPass /servlet/ http://prams_nt_03:6666/servlet/
ProxyPassReverse /servlet/ http://prams_nt_03:6666/servlet/
</IfModule>
Does anyone have any suggestions as to what else I need to do ? Maybe I need to specify somewhere else that I am using port 6666 ?
Also, another point is that I am unable to deploy from JDeveloper, the connection test to the application server fails with the error message : Disconnected.
My server is Win NT sp6, my AS is 1.0.2.2.2a.
Thanks in advance for any help you can give.

Hiya Debu,
1) Are OHS and OC4J running on the same server ?
- Yes, along with 9i DB rel 1
2) What ports are used by OHS and OC4J ?
The ports are 8888 for both, I have removed the setting for the OC4j Server, which means the OC4J server is not working behind Apache.
3) Can you go to OC4J's homepage directly i.e. http://myhost:6666 ?
I cannot go using hostname, but can using I.P address
4) Can you go to OHS (aka Apache)'s homepage directly ?
Yes, using I.P and hostname
5) Do you get any errors during startup of OC4J or OHS ? You will an error port already in use error when a port is used by someone else ?
None that I can think of.
I think you hit the nail on the head when you said it could be a DNS problem ! I will configure that now. Thanks for your help, you're a star !

Firewire ports conflict with sound settings.

Hi, Peculiar problem. My sound suddenly switched to being internal speaker only, even though I have decklink HD Extreme card and was using it as my audio output the night before. Narrowed the problem down to anything being plugged in to the firewire ports - FW400 and FW800 ports and drives or even my Mini DV deck. When I plug anything into the firewire ports, trying to get to the sound settings in system preferences hangs, and all sound will only work on the internal speaker. This is a sudden problem and leaves me only being able to plug in esata external hard drives. There is some sort of conflict going on somewhere. Can anybody help?
Sam

Here's a little bit of the system log with some crashes reported to do with coreaudio. I've tried to isolate the important bit
Oct 29 10:24:28 main-users-mac-pro ReportCrash[437]: Formulating crash report for process coreaudiod[149]
Oct 29 10:24:29 main-users-mac-pro com.apple.launchd[1] (com.apple.audio.coreaudiod[149]): Exited abnormally: Bus error
Oct 29 10:24:29 main-users-mac-pro ReportCrash[437]: Saved crashreport to /Library/Logs/CrashReporter/coreaudiod2009-10-29-102424main-users-mac-pro.crash using uid: 0 gid: 0, euid: 0 egid: 0
Oct 29 10:24:33 main-users-mac-pro ReportCrash[437]: Formulating crash report for process coreaudiod[447]
Oct 29 10:24:33 main-users-mac-pro com.apple.launchd[1] (com.apple.audio.coreaudiod[447]): Exited abnormally: Bus error
Oct 29 10:24:33 main-users-mac-pro com.apple.launchd[1] (com.apple.audio.coreaudiod): Throttling respawn: Will start in 6 seconds
Oct 29 10:24:33 main-users-mac-pro ReportCrash[437]: Saved crashreport to /Library/Logs/CrashReporter/coreaudiod2009-10-29-102432main-users-mac-pro.crash using uid: 0 gid: 0, euid: 0 egid: 0
May showing that will help.
Thanks
Sam

USB Port conflict on Windows XP

My C309a works fine, but I am having a conflict with my external hard drive, The strange thing is that the HP C309a is listed under Disk Drives when I look at Device Manager, Is there away to fix this?

I also sent this to Lightroom Extra and Adobe Bug Report.

I need a scrubber to remove printer port conflicts.

Trying to install a color Okidata printer. I'm told by Oki tech support that I need a scrubber from HP to clear ports and then install okidata driver first, before any HP drivers. Where do I get this scrubber. I used to have an HP 1200. Using Windows 7 on an HP Pavilion desktop.

Hi,
I can only find HP P2055dn:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=3662059
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Apparent port conflict using LCDS with JBoss

Hi,<br />I am somewhat new to this so please bear with me. On my server I have lcds installed and sample.war working in JBoss 4.0.5. I have written a datatier in Java against PostgreSQL 8.x and am writing simple mxml programs to test it. I have had some success with this. All of the new code is installed in a copy of samples.war because I do not understand the configuration files well enough to toss the examples out. My latest problem is that my recent versions of the war file get this error in my JBoss log file:<br />Exception in thread "RTMP-Server" <br />flex.messaging.endpoints.rtmp.RTMPException: The RTMP server has encountered a fatal exception starting up: Address already in use<br /> at flex.messaging.endpoints.rtmp.BaseNIORTMPServer.run(BaseNIORTMPServer.java:317)<br /> at java.lang.Thread.run(Thread.java:595)<br />The port specified in the services-config.xml in my war is 2038, and I see JBoss also has an identical services-config.xml at:<br /> <jboss root>/server/default/flex/WEB-INF/flex. <br />Has anyone else seen this? Do I just need to change the port? In both places? Or is there something else I need to do?<br />Thanks!

Robert,
Thanks for responding. Here is my Ant script, comments and all.
Jerry
=======================
<?xml version="1.0" ?>
<project default="main" >

<taskdef name="svn" classname="org.tigris.subversion.svnant.SvnTask"> </taskdef>
<target name="main" depends="checkout, initvars, initdirs, compile, war, deploy"/>
<target name="mainxxxx" depends="initvars, compile"/>
<property name="checkout_target" value="C:\dev\sb\BuildScience\ant_dev\root3"/>
<property name="checkedout_project" value="${checkout_target}"/>
<target name="checkout" >
<svn javahl="true" description="use svn-ant to checkout from our svn -- destPath is 'basedir' for all else">
<checkout url="http://sb001.com/dev/sbda"
destPath="${checkout_target}"/>
</svn>
</target>
<target name="initvars">
<property name="src" value="${checkedout_project}/src"/> 
<property name="bin" value="${checkedout_project}/output"/> 
<property name="web" value="${checkedout_project}\WebContent"/> 
<property name="descriptors"
value="${checkedout_project}/output/deploymentdescriptors"/>
<property name="wardir" value="${checkedout_project}/output/war"/>
<property name="warfile" value="sbda.war"/>
<property name="warfinaldir" value="${checkedout_project}/finalwar"/>
<property name="deploydir" value="${checkedout_project}/fakojbossdeploydir"/>
<property name="morejarsdir" value="${web}\WEB-INF\lib"/>
<property name="morejarsdir2" value="${web}\WEB-INF\flex\jars"/>
<echo> "checkout_target is: ${checkout_target}" </echo>
<echo> "checkedout_project is: ${checkedout_project}" </echo>
<echo> "src is: ${src}" </echo>
<echo> "bin is: ${bin}" </echo>
<echo> "web is: ${web}" </echo>
<echo> "descriptors is: ${descriptors}" </echo>
<echo> "wardir is: ${wardir}" </echo>
<echo> "warfile is: ${warfile}" </echo>
<echo> "warfinaldir is: ${warfinaldir}" </echo>
<echo> "deploydir is: ${deploydir}" </echo>
<echo> "morejarsdir is: ${morejarsdir}" </echo>
<echo> "morejarsdir2 is: ${morejarsdir2}" </echo>

</target>
<target name="initdirs">

<mkdir dir="${wardir}/WEB-INF/classes"/> 

<mkdir dir="${warfinaldir}" />
<mkdir dir="${deploydir}" />
</target>


<target name="compile">
<javac destdir="${bin}" srcdir="${src}" includes="**/*.java" verbose="true" >
<classpath>
<fileset dir="${morejarsdir}">
<include name="**/*.jar"/>
</fileset>
<fileset dir="${morejarsdir2}">
<include name="**/*.jar"/>
</fileset>
</classpath>
</javac>

</target>
<target name="war">

<copy todir="${wardir}">
<fileset dir="${web}" >
<include name="**/*.*" />
<exclude name="**/junit.jar" />
<exclude name="**/javax.servlet.jar" />
<exclude name="**/commons-logging.jar" />


</fileset>

</copy>


<copy todir="${wardir}/WEB-INF/classes">
<fileset dir="${bin}" includes="**/*.class" />
<fileset dir="${src}" >


<include name="**/*.properties"/>
</fileset>
</copy>

<jar jarfile="${warfinaldir}/${warfile}" basedir="${wardir}" />
</target>
<target name="deploy">
<copy file="${warfinaldir}/${warfile}" todir="${deploydir}" />
</target>

</project>

Listener error port conflict 1521

Ple help me to resolve my issue. I installed oracle 11g on windows 7. Showing an error message "use another port number" While configuring listener in Windows 7 environment. But I have checked that port with using netstat -nabo command even any application not engaged with this port.

06bc13a3-6c24-46d0-8a46-dbc3c6d597b1 wrote:
Thanks for your reply. Earlier I configured listner with same port but I forcefully accepted with the same error but I am unable connect db. I checked with Net Manager I tried to connect with service name. But I got below reply
Initializing first test to use userid: scott, password: tiger
Attempting to connect using userid: scott
The test did not succeed.
ORA-12170: TNS:Connect timeout occurred
There may be an error in the fields entered,
or the server may not be ready for a connection.
Or there could be a firewall
or there could be no listener on that port at that IP
or you could actually have two processes vying for the same port
or ....
or ...
or ...
We don't know what OS the database and listener are on
we don't know the actual connect specification you used.
We don't know what state your listener is in.
Instead of telling us your interpretation of what you think you did, try showing us what you actually have. Copy and paste from a command line prompt are a beautiful thing, but only if you actually use them.
============================================================================
BTW, it would be really helpful if you would go to your profile and give yourself a recognizable name. It doesn't have to be your real name, just something that looks like a real name. Who says my name is really Ed Stevens? But at least when people see that on a message they have a recognizable identity. Unlike the system generated name of 'ed0f625b-6857-4956-9b66-da280b7cf3a2', which is like going to the pub with a bag over your head.
============================================================================

Cloudscape port conflict

Similar Messages

Maybe you are looking for