Cluster member caches a copy of DefaultWebApp from admin server

Hi,
          It seems that when a cluster member starts up, it fetches a copy of
          DefaultWebApp web application from admin server, and keeps it under a
          directory of $BEA_HOME/wlserver6.1/config/mydomain/applications/.wlnotdelete_$SERVER_NAME,
          and it doesn't look into its local copy of DefaultWebApp even being
          modified.
          How does this happen? How can it be disabled?
          Thanks in advance,
          William

Hi,
          this does probably occur due a change in WLS 6.1 which was done in order to assure the server
          to function properly even when the customer deletes the defaultWebApp. If this is the case
          this
          cannot switched off.
          Do you observe other symptoms, which lets you think you have a problem with your server ?
          Regards,
          Christian Buchegger
          Developer Relations Engineer
          BEA Support
          William Li schrieb:
          > Hi,
          >
          > It seems that when a cluster member starts up, it fetches a copy of
          > DefaultWebApp web application from admin server, and keeps it under a
          > directory of $BEA_HOME/wlserver6.1/config/mydomain/applications/.wlnotdelete_$SERVER_NAME,
          > and it doesn't look into its local copy of DefaultWebApp even being
          > modified.
          >
          > How does this happen? How can it be disabled?
          >
          > Thanks in advance,
          >
          > William

Similar Messages

Need to copy .txt file from FTP server and downloaded on local server directory.

I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.

Below links will help achieving it:
https://www.virtualobjectives.com.au/sqlserver/ftp_scripts.htm
http://www.mssqltips.com/sqlservertip/2884/sql-server-integration-services-ssis-ftp-task-for-data-exchange/

How to copy a file from application server to local system

Guys,
Need to copy a file from application server to local system.Is there an FM for the same.
Tried searching for it but couldn't find anything useful.
Code snippets will be highly appreciated.
Warm Regards,
P.
Moderator message: very frequently asked and answered question, obviously you did not search thoroughly, all points removed.
Edited by: Thomas Zloch on Dec 3, 2010 4:48 PM

hi,
You can use the transactions CG3Y or through program u can do like this..
DATA: BEGIN OF IT_FILE OCCURS 0,
                LINE TYPE STRING,
           END OF IT_FILE.
OPEN DATASET <file_name> FOR INPUT IN TEXT MODE ENCODING DEFAULT.
        IF SY-SUBRC IS INITIAL.
          DO.
            READ DATASET<file_name> INTO IT_FILE-LINE.
            IF SY-SUBRC = 0.
              APPEND IT_FILE.
              CLEAR IT_FILE.
            ELSE.
              EXIT.
            ENDIF.
          ENDDO.
        ENDIF.
CLOSE DATASET <file_name>.
Download it to local system using FM - GUI_DOWNLOAD

Copied oracle binaries from one server

We are on 10.2.0.1 on solaris 10 We have copied oracle binaries from one server to another and now we want that oracle database will get installed
Can you please let us know that what needs to be done so that I will be in sync
If I am not wrong then there is command like relink
Please suggest>???

Take a look to the metalink note : How To Clone An Existing RDBMS Installation Using OUI Doc ID: Note:300062.1
... and the doc :
http://download.oracle.com/docs/cd/B19306_01/em.102/b31949/managing_deployments.htm#BABCGEHB
Nicolas.
Message was edited by:
N. Gasparotto

TS1402 I can not copy any files from the server & from the Finder. System MAC OS 10.7.5

I can not copy any files from the server & from the Finder. System MAC OS 10.7.5
<Email Edited by Host>

Hi, what is the no boot directory found about???
Can you give details step by step of what you're trying?

MAXDB copy log file from one server to the other server.

Hi All,
I want to copy a log file from one server to the other server , the database is Maxdb and i don't know how to do it. I want to do it through command prompt, (set of commands required) the front end tool which we are using is DBM ( database manager). Please help.
Regards
M.A

Hi,
Basically, the process is of log shipping. Transferring logs from DC to DR system.
For that, you can check HowTo - Standby DB log shipping - MaxDB - SCN Wiki
This is script based. I have not done it but the idea remains the same.
Regards,
Divyanshu

How Can I Copy an database from one server to another ?

Hi All,
I need to copy an existing database from one server to another server. I want to maintain all the settings from the source database.
I´m not used to Oracle database and i´d be glad for any help.
How can I do this ? Do I need to backup and restore in the other server ? Do I need to copy files from one server to another ?
Any help will be really appreciated.
Carlos.

I think a simpler approach, other than using RMAN, is to do a database export from the source and then import them into the target database. But you will need to do some ground work on the target, i.e, create database, tablespaces, and schemas (with their name the same as those in the source database.)

Copying directory data from one server to another

Hi friends,
I maintain two directory server (ver. 5.2) with same domain (xxx.com) and i have to copy the entire data from one server.
I tried to export from a one server and import it on another server, but it didn't get copied and it is getting object class violation error,
Please give me some tips to copy the entire data along with password encryption, so the users should be able to login to the new server.
Regards,
Iqbal

Before you copy the data, make sure the new server has all user-defned schema (objectclass, attribute) which reside on the first server. What you can do is to copy the schema over first. Then you can copy the data over.

Copying SSL Certificates from one server to another.

I have a question that hopefully someone might have the answer for... I have a IPlanet 6.0 SP4 server that has an SSL certificate I'm trying to move to a new server that's on SunOne 6.1. I was under the impression that I could easily copy the <Iplanet_Root>/alias/https-<ServerInstance>-<server>-<key3/cert7>.db files to the new server from that server's alias directory. However before I copied the files, I immediately noticed the new server's cert file is called cert8 instead of cert7 and is 64K as opposed to the 6.0 server's 16K.
I stopped the web instance and renamed the current db files and copied in the new and changed the cert7 to cert8. When I restarted the server, it stayed up and didn't report any problems. However, when I go the security tab and click on any of the links on the left column, an internal server error (http500) page is displayed. No additional errors show up in the errors log.
Unfortunately, we don't have the original certificate request. I'm sure when it was applied for; it was cut and pasted into the install certificate page. Otherwise, I'd simply do the install on the other server. Is there a simply means to copy an already installed cert from one sever to another?
Any assistance would be greatly appreciated.

Migration from 6.0 to 6.1 should take care of this. You don't have to rename the files to cert7.db after the migration, just leave them with their new names and size as is. The new file created in 6.1(after migration is complete) will be called cert8 and this is fine because 6.1 uses newer version of security libs. Doc links:
http://docs.sun.com/source/817-1830-10/migrate2.html
http://docs.sun.com/source/817-1831-10/agcert.html#wp1017112
Thanks,
Manish

Copying report file from one server to another requires refresh database?

Hi,
I am using Crystal Reports 11 for development.
We have a number of crystal reports that are served on a web server running classic ASP that uses these reports with Embedded Crystal Server XI installed on the server.
When I am developing or modifying a .rpt file (report) I connect to a UAT/development database on a dedicated development server.
When I am happy with the report and testing is successful I copy and paste the report onto the production server, replacing the old report.
The problem is I don't have a user account and password on the production server. Our DBAs are the only one with passwords on the prod servers. If an application needs a password entered they come to my desk and enter it for me.
The problem is in order for the modified report to work on the production, I have to call up a DBA to "verify the database" for me by connecting to production server and entering username and password.
This is really annoying.
Why can't I just disconnect\log off server in crystal reports, then copy and paste the .rpt file to prod server and be done with it?
If I had dozens of reports to change, it seems very rigid that I have to ask a DBA to enter the user account and password used by the application to run the report.
Can someone please explain how to be able to copy and paste modified reports/ or new reports from one server to another without having this problem.
Thanks
Haggisns

Moving to the Legacy SDK forum.
Crystal can be magical sometimes but if you don't tell CR where the database is how is it to know you moved it?
As you have seen and for security reasons you can't simply "drop" a report on any server and expect it to just connect to a new DB server without being asked to enter in credentials or that you have changed the DB server to report off of.... If it's too much work for the DBA to set log on info then he should give you access to so can.
Thank you
Don

Needed to copy the share from one server to share in another server

Hi ,
Needed to copy the data from one share named as xyz in the server 1 to the another share abc in another server 2.
Share xyz data should be copied to the share abc which has already different data in it .We need to copy all the data from the share xyz to the share abc without deleting any existing data in the destination share.
I know that /MIR option will replace the destination same as source
Can anybody help us in the Robocopy command & switches for this activity?
Any help is greatly appreciated!
Thanks & Regards S.Swaminathan Live & let others live!!!

Hi Mandy,
Thanks for your reply.
I have done many robocopy for the share movements from the one server joined in a domain to another server joined in the same domain.In that instances, the destination server will not be having any share of the old server name and just I robocopy the share
from the old server to the new server after creating a new share .The usual command is as follows:
"\\server1\oldshare" \\server2\newshare" *.* *.* *.* /ZB /E /COPY:DATO /XJ /R:0 /W:0 /TEE /dcopy:T /NP /log:c:\robocopy.txt
And after the copy , during the cutover of the standalone DFS pointing to the new share , the domain users in the corresponding access groups (name of the groups based on the old server name) of Full,Modify,Read will be appropriately copied to the respective
new groups (name of the groups based on the new server name) of the new share and the access is ensured by the users.
But in this case , the destination server is already having a share with existing data in it and to be added with the old share data
My question is shall I use the same command as before by copying all the data to the newly created subfolder inside the existiing destination share through the following command
"\\server1\oldshare" \\server2\newshare\new sub-folder" *.* *.* *.* /ZB /E /COPY:DATO /XJ /R:0 /W:0 /TEE /dcopy:T /NP /log:c:\robocopy.txt
You have already mentioned /E without purge options will do.
Just asking one more time for the safer side
Thanks & Regards S.Swaminathan Live & let others live!!!

Copying logical database from one server to another

Hello All,
I have one logical database name as KDF in my test server which has become inconsistent due to some reason . In my live server tht logical database is consitent now what is the option to copy the same from my live server to test server .
If i copied will it work properly or is there any other solutions or options.
Thanks
Sunny

Hi Suny,
First of all, we cannot create a transport request in Prodcution server and then transport it to the Development Server.Else, it is the other way round,one can create a request in development,then transport it to Test and then to the Production server.
That is why I said that if the SAP standard LDB is disturbed in Development as well,then you will have to manually look in for the modifications between the Production and the Test Server,and change them in the developemt and then transport it to Test server and then Production.
Hence,the best solution is to manually check for the inconsistencies and modify in the development server and then transport.
The path for copying that you are following is correct anyways.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

Copy the data from Sql Server to edirectory using java

Hi ,
I am new to e directory.I don't know how it works.Can some one assist
me on this ,I have to extract data from SQL Server and update these
data in edirectory.This is needs to be done using java.
If any one can provide me the sample code or please suggest how to
proceed .
Thanks in advance
dukewarm
dukewarm's Profile: http://forums.novell.com/member.php?userid=53430
View this thread: http://forums.novell.com/showthread.php?t=373051

dukewarm;1792481 Wrote:
> Hi ,
>
> I am new to e directory.I don't know how it works.Can some one assist
> me on this ,I have to extract data from SQL Server and update these
> data in edirectory.This is needs to be done using java.
>
> If any one can provide me the sample code or please suggest how to
> proceed .
>
> Thanks in advance
Read the values from SQL server and use LDAP to update the data in
eDirectory.
Thomas
thsundel
thsundel's Profile: http://forums.novell.com/member.php?userid=128
View this thread: http://forums.novell.com/showthread.php?t=373051

How to remove copy of message from .Mac server

To autoremove the copy of a message on the .Mac server, Mail help says "choose Mail > Preferences and click Accounts. Select a .Mac or IMAP account, click Mailbox Behaviors, and change the option for storing messages on the server."
Unfortunately, that option seems to be missing from both the "Mailbox Behaviors" and "Advanced" tabs.
I have a separate pop account from another ISP that does have the option under the "Advanced" tab.
Does anyone know how to do this for the .Mac account?
Thanks!
Jim
iMac 24" Mac OS X (10.4.9) Mail version 2.1.1

A .Mac type account with Mail is really an IMAP account and behaves in the same way.
There is no option to automatically remove messages from the server for an IMAP account's Inbox mailbox with any email client such as the Mail.app.
You can access a .Mac account as the following account types with the Mail.app.
.Mac
IMAP
POP
And as the following account types with another email client on your Mac or on another computer - a Mac or Windows PC.
IMAP
POP
I access my .Mac account as a .Mac type with Mail and as an IMAP account with Outlook Express on my Windows XP notebook at work.
A benefit of an IMAP account is the ability to keep all server stored mailboxes available and synchronized with an email client on different computers.
If you want to access your .Mac account as a POP account with Mail will require deleting and recreating the account selecting POP as the account type instead of .Mac or IMAP.
If you are not storing the account's Sent messages on the server with Mail, before deleting the account you need to transfer all sent messages from the account's Sent mailbox to a user created "On My Mac" location mailbox which is stored locally on the hard drive.
When deleting an account with Mail, the account named folder at Home > Library > Mail which stores the mailboxes for the account is also deleted along with the mailboxes for the account.
This will not affect any messages currently stored on the server in the account's Inbox mailbox.

Problem while starting Managed Servers from Admin Server console

I am facing a problem while trying to start the managed servers in wlp8.1 portal from the admin server console.
<Dec 7, 2004 4:52:14 PM IST> <Info> <NodeManager@*.*:5555> <Starting Server orbitPortalDomain::orbit_ManagedServer1 ...>
<Dec 7, 2004 4:52:16 PM IST> <Info> <NodeManager@*.*:5555> <Server orbitPortalDomain::orbit_ManagedServer1 started, process id = 1,832>
<Dec 7, 2004 4:52:17 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.4.2_04-b05 from Sun Microsystems Inc.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://10.6.0.212:7001 to check if there exists a running admin server at this URL.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973
WebLogic XMLX Module 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973 >
<Dec 7, 2004 4:52:18 PM IST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://10.6.0.212:7001 to retrieve the initial configuration.>
<Dec 7, 2004 4:52:21 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\bea_turner\weblogic81\common\nodemanager\orbit_ManagedServer1\orbit_ManagedServer1.log is opened. All server side log events will be written to this file.>
The WebLogic Server did not start up properly.
java.lang.NoClassDefFoundError: com/bea/wsrp/util/debug/Debug
at com.bea.wsrp.security.WSRPIdentityAsserterProviderImpl.<clinit>(WSRPIdentityAsserterProviderImpl.java:45)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.createSecurityProvider(SecurityServiceManagerDelegateImpl.java:232)
at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:939)
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:151)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:257)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceManagerDelegateImpl.java:698)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:731)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:874)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:717)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)
at weblogic.Server.main(Server.java:32)
Reason: com/bea/wsrp/util/debug/Debug
pls advice
Thanks
Sasanka

Hello,
There is a lot of stuff on this thread:
http://forum.java.sun.com/thread.jspa?threadID=567363&messageID=2801617
these guys are trying to run weblogic with JBuilder.
Looks like your classpath is incorrect, can you go to your admin console-->server-->remote start
copy the classpath and post it here.
Check for spaces in your classpath, missing jars or directories and miss spelt paths.
Has this problem been occuring as soon as you installed WLP or not?
Cheers,
Hoos

Cluster member caches a copy of DefaultWebApp from admin server

Similar Messages

Maybe you are looking for