Cluster Node Issue Content Server
Hi ,
I have configure 2 node cluster Content Server. I have one issue only from one box I can not see node2 in admin server. For example, I have test1 and test2 box as node1 and node2. From admin server on test1 box I can not able to connect to test2. But same time I can connect to both the server from test2 box.
Please see error I am getting.
Need help resolving this issue.
Regards,
Jigar
Copyright(C) 1996-2007 Oracle, Inc. All rights reserved.
Ready and waiting for connection on port 4440, PID 7236 (idc42)
idcadmin 08.12 13:37:57.119 IdcServerThread-1 requestRequiresRemoteServer() checking admin 'Prodcs1_admin', node name 'ecmprod1.sjrwmd.com'
idcadmin 08.12 13:37:57.123 IdcServerThread-1 Executing command: [opt/oracle/ucm/cs1/admin/bin/UnixProcCtrl, exec, /opt/oracle/ucm/cs1/etc/idcserver_query]
idcadmin 08.12 13:38:07.977 IdcServerThread-2 requestRequiresRemoteServer() checking admin 'Prodcs1_admin', node name 'ecmprod1.sjrwmd.com'
idcadmin 08.12 13:38:07.978 IdcServerThread-2 Executing command: [opt/oracle/ucm/cs1/admin/bin/UnixProcCtrl, exec, /opt/oracle/ucm/cs1/etc/idcserver_query]
idcadmin 08.12 13:38:08.071 IdcServerThread-2 requestRequiresRemoteServer() checking admin 'Prodcs1_admin', node name 'ecmprod2.sjrwmd.com'
(internal) 08.12 13:38:08.080 IdcServerThread-2 !csUnableToConnect2,127.0.0.1|164.51.112.14|164.51.112.18,4440-exception stack
intradoc.common.ServiceException: !csUnableToConnect2,127.0.0.1|164.51.112.14|164.51.112.18,4440
at intradoc.provider.SocketOutgoingConnection.createSocket(Unknown Source)
at intradoc.provider.SocketOutgoingConnection.connectToServer(Unknown Source)
at intradoc.provider.SocketOutgoingProvider.createConnection(Unknown Source)
at intradoc.provider.SocketOutgoingProvider.createRequest(Unknown Source)
at intradoc.admin.AdminService.doRequestRemoteAdminService(Unknown Source)
at intradoc.admin.AdminService.loadAllIdcServerData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(Unknown Source)
at intradoc.common.ClassHelperUtils.executeMethodEx(Unknown Source)
at intradoc.common.ClassHelperUtils.executeMethod(Unknown Source)
at intradoc.server.Service.doCodeEx(Unknown Source)
at intradoc.server.Service.doCode(Unknown Source)
at intradoc.server.ServiceRequestImplementor.doAction(Unknown Source)
at intradoc.server.Service.doAction(Unknown Source)
at intradoc.server.ServiceRequestImplementor.doActions(Unknown Source)
at intradoc.server.Service.doActions(Unknown Source)
at intradoc.admin.AdminService.doActions(Unknown Source)
at intradoc.server.ServiceRequestImplementor.executeActions(Unknown Source)
at intradoc.server.Service.executeActions(Unknown Source)
at intradoc.server.ServiceRequestImplementor.doRequest(Unknown Source)
at intradoc.server.Service.doRequest(Unknown Source)
at intradoc.server.ServiceManager.processCommand(Unknown Source)
at intradoc.server.IdcServerThread.run(Unknown Source)
Caused by: java.net.UnknownHostException: 127.0.0.1|164.51.112.14|164.51.112.18
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:177)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at java.net.Socket.connect(Socket.java:469)
at java.net.Socket.<init>(Socket.java:366)
at java.net.Socket.<init>(Socket.java:179)
at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:196)
... 26 more
Hi!!
First
What is ECM Enterprise content management?
What is Stellent
What is Standard cluster content server?
Is this more than product or that is one product and which one is for cluster on windows 2003
Do I need to install content server standalone for every node with IntradocDir different to clusternodeIntradocDir before going to install cluster server
I have
Second
When I try to install cluster server this error displayed to me
D:\CS10gR3\UCM\ContentServer\win32>Installer -set-ClusterNodeIntradocDir=f:/oracle/ucm/server/stelletnt/ucm01 -set-ClusterNodeName=ucm01 -set-ClusterNodeAddress
=101.101.102.196 -set-ClusterBinDirRule=shared ConfigureClusterNode
Unable to find file "ConfigureClusterNode".
The file wait.dat wasn't removed.
I find release note that describe problem with -set- it correct to set and still same error appears
Thank you for cooperation
Similar Messages
-
MySql Cluster under the Content Server
Hi
Can you use MySql cluster with the content server?
One of the requirements is that the database supports transactions. With MySql it is highly recommended useing the InnoDB storage engine.
So my question is can we use the NDB storage engine.
Regards, MarinóNDB has not been tested against by Adobe, so we don't know one way or the other. However given the limitations in SQL Syntax and Transactional support, it is likely that this will not work.
-
Does anyone know if it is possible to use a dual 2.0 G5 Cluster Node as a head server for an XRAID? I would like to have a monitor attached also. I know this will require filling both PCI slots (one video card and one fiber card). Just wondering if there are any issues with that config.
Nah, it will work.
Things to note:
* Cluster node only has one drive. If it goes, there's no mirror to fail over to.
* Cluster node comes with a 10-client version of OS X. If you're going to use it as a file server, hopefully there aren't many clients.
* No CD/DVD drive on the cluster node.
But otherwise no physical reason it won't work. -
Is setting up a cluster node as a stand alone file server possible? What would it take?
Main concern is if there is a firmware stop point that expects a physical or logical link to a normal server before a cluster node will boot
OK, I'm confused. What makes you think a cluster node isn't a normal server?
The only difference between the XServe Cluster Node and the XServe (at least, the PowerPC one it's based on) is the single drive bay (vs.3) and lack of optical drive. That's it. It comes with the same version of the OS. The same ports, runs the same apps and does the same thing as the non-cluster node version.
Can a cluster node be put into firewire mode with the T option, followed by a drive restore from a pre-configured Mac X server disk image....avoiding all the command line stuff. Or for that matter...just wapping out the drive with a pre-configured Mac X server drive?
Sure. The only thing you can't do it put a second drive inside the machine since, by definition, it only has a single drive bay. -
Sender File Channel Cluster Node issue in CC monitoring
Hi,
I have a issue in Sender File CC. The channel is active and polling every 1 min. The issue is in the CC monitoring it is just showing one single line i.e "Polling interval started.Length: 60.0 seconds" the other two lines Processing started and Processing Finished Successfully are not visible...
Please let me know the solution if you have faced a similar issue.
http://i50.tinypic.com/28sv4vr.jpg This is the refrence to the screen shot from CC monitoring...Deepak,
Please let me know the solution if you have faced a similar issue.
Delete the Enqueue-lock related to the stopped Communication Channel. Refer SAP Note 821267.
For the 7.1 versions, please note that the Lock Manager is under the /nwa/locks, or on the location "Availability and Performance Management -> Locks".
@ Ramg
If no files are placed in the source directory and the channel will keep try polling l!!! Place files in the source and check.
Even if there are no files in the source directory, the 3 steps of - polling interval started, processing started and processing finished - should take place by the file channel.
Regards,
Neetesh -
Configure MaxDB Content Server Website in IIS 6.0
Dear All:
I need to know how can I configure content server website on IIS. Our company was working on standalone server 2003 with MaxDB 7.6. Now the server has been migrated into windows 2003 cluster with MaxDB 7.6 installed on the same cluster.
I tried to execute WebSiteManCS.exe from content server CD but i got the error "An error occured during the creation of the SAP Content Server website in IIS".
Could you please advise how can I resolve this issue? Also, I did not created IIS cluster on both content server nodes. Do I have to create it or is there any steps that I have to follow in this case?
Regards,
Ahmad YasinHi,
The installation of the content server creates the web site automatically.
Please refer the following SAP Notes carefully, to get more information.
[ Note 1039401 - SAP Content Server Clustering with Windows 2003.|https://service.sap.com/sap/support/notes/1039401]
[Note 175096 - SAP Content Server installation guide|https://service.sap.com/sap/support/notes/175096]
[Note 658442 - SAP Content Server 6.30 on Windows 2003 servers|https://service.sap.com/sap/support/notes/658442]
Regards,
Bhavik G. Shroff -
Failover cluster node - You do not have administrative privileges on the server 'servername' ?
Hi Hello & Good morning Technet's,
I would like to post a question which i really expecting a solution.
I got 2 domain in one single forest.
Domain 1: hg.corp
Domain 2: iac.corp (iac.corp
is a tree domain under hg.corp forest)
Trust : Transitive
trust between hg.corp and iac.corp
Domain controller 1: dc.hg.corp
(for hg.corp)
Domain controller 2: iacdc.iac.corp
(for iac.corp)
I want to make a Fail-over cluster between this 2 domain controllers ( But both are in different domain literally, but in same forest )
Process Validate cluster in dc.hg.corp
dc.hg.corp can added, but iacdc.iac.corp failed (Error: You do not have administrative privilages on the
server 'iacdc')
Process Validate cluster in iacdc.iac.corp
iacdc.iac.corp can added, but dc.hg.corp failed (Error: You do not have administrative privilages on the
server 'dc.hg.corp')
Technet please provide me a solution for this issue, So i can reduce server box counts.
Thank you & Have a nice day.
Shamil MohamedHi,
We do not support combining the AD DS role and the failover cluster feature in Windows Server 2012.
This behavior is by design.
The related KB:
You cannot add a domain controller as a node in a Windows Server 2012 failover cluster environment
http://support.microsoft.com/kb/2795523
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
File Share Cluster Transfer Issues - Windows 2012 R2 - Two Nodes
Hi There,
I am having some issues in creating a simple file share on a 2 node cluster.
Each "File Server" is Windows 2012 R2 Standard.
Each server has 4 Nic Ports, 2 are configured as a Control Team and the other 2 as a Media Team. The media team is specifically for any storage and file sharing traffic, the control team is purely for access to the server via RDC.
The storage is from a NetApp SAN connected via SAS cables to the 2 "File Servers" and transfer speeds to and from that are good (1GB/s)
I have looked at different step-by-steps to get this working, they all are similar to: https://robertsmit.wordpress.com/2012/06/26/clustering-fileserver-on-windows-2012-step-by-step/
The share permissions are configured with Everyone with Full Control.
Once the file shares are all set up, I can browse the shares and any current folders and files.
I can download any files that exist on these shares...
The issue is when I try to put a file on the share from a "client" server (win 2008 r2) or even from the other node (connecting to the file share location as I would on another machine)
I just get the copying dialogue attached, which sits there for about 3-4 minutes and then just finishes with a Network Error.
This only occurs during an upload of a file to the share.
All servers can ping each other, there are no cluster event errors..
Can anyone help, I need to get this fixed ASAP.
If you need more info then please ask.
Thanks,
-TimHi Tim,
Did you run the cluster validation before you create this cluster? Please disable any firewall or AV soft and install the recommended hotfixes and updates for Windows Server
2012 R2-based failover clusters update to narrow down the issue first.
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://support.microsoft.com/kb/2920151
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
SAP Content Server Connectivity issue
Hi Friends,
We have installed Content server 6.40 on a standalone server after the installation i tried to open below link but its not opening.
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
This content server has to be connected to R3(ECC 6 EHP4 ) hence we went to t codes OAC0 and OACT to create content repository
We have created a content repository as below
Content Rep. ZDMS
Description ZDMS
Document Area : DMS document management system
Storage type: 04 HTTP content server
Version no. 0046 Content Server version 4.6
HTTP server 192.168.30.12(where the content server is installed)
Port Number 1090 SSL Port Number
HTTP Script ContentServer/ContentServer.dll
Phys. path D:\usr\sap\FNS\SYS\global\
and when i am checking i am getting below error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
i have also created a entry in table SDOKPROF
as below but still same issue.
NAME = USEHTTPPLG
VALUE = OFF
and also we have run RSHTTP05 to check if any error but no errors.
Even when we are going in t code CSADMIN we are getting same error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
In dev_icm belwo error is showing.
** WARNING => Connection request from (2/3/0) to host: xxx.xxx.xx.xx, service: 1090 failed (NIECONN_REFUSED)
[Thr 5352] {000102ca} [icxxconn.c 2271]
Kindly help to solve this issue.
Thanks
BasisHi Deepak,
Thanks for your inputes i checked IIS and after the content server installation these website were not created hence i created it manully as per note 1823408 - Manual Creation of Website on Windows 2008 Server
I created SAP_Content_Server by following first 3 steps but after that 4 , 5 and 6 steps are not clear i dont see those option in ISS manger.
1. Go to Internet Information Services Manager from Start Menu >> Admintrative tools >> IIS manager
a) or Start Menu >> Run >> "Inetmgr"
2. Right Click on Sites >> "Add Website" to create a new Website.
a) Site name <Name of the webiste>
b) port <Port No>
c) Physical Path <path of the Content Server installation directory>
d) Application Pool >> Select "DefaultAppPool"
e) Click "OK"
f) Website will be created.
3. Right click on the newly created website >> "Add Application"
a) Alias "ContentServer"
b) Application Pool >> Select "AppPool_ContentServer"
c) Physical Path <path of the Content Server installation directory>
d) Click "OK"
Content Server Application will be created.
4. Double Click on the website >> Handler Mappings
a) Select "ISAPI.dll" from the list >> Edit Feature Permissions
b) Check the tick boxes for "Script" and "Execute"
c) Click "OK"
5. Double Click on the website >> Handler Mappings
a) Enable "Anonymous Authentication"
b) Enable "Basic Authentication"
c) Enable "Windows Authentication"
6. Double Click on the IIS Server name >> ISAPI and CGI Restrictions >> Click on "Add"
a) ISAPI or CGI Path <path of the Content Server installation directory,selecting "ContentServer.dll" >
b) Description "ContentServer.dll"
c) Check the tick box "Allow extension path to execute"
d) Click "OK" -
MaxDB Connection Issue for Content Server
Hi All,
We have installed Content Server 6.40 on Windows 203 server.
We are able to visit the Url http://host:port/ContentServer/ContentServer.dll?serverInfo
But while creatng a repository i am facing issues..its throwing error that
"HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s"
Checked these two notes 698915, 301352 and ru the comman to register MaxDB drivers and got that message that the drivers registered successfulyy.
But still i am not able to create repository uing CSADMIN.
Also ,when tryng to connect to MaxDB using superdba or contro user ,its throwing error "-2 ERR_USRFAIL authorization failed "
Even the control user i amnot able to login.I am giving the password which i gave during installation.
Database is SDB
Pls suggest.
Regards
AjayHello Ajay,
1. I recommend you to create the SAP ticket, if you failed to connect to MaxDB
using superdba or control user with known to you passwords.
2. Could you post the password, which you used during the installation.
In the past the issue was with using passwords more as 9 symbols with Unicode MAXDB.
If you was using, for example, "test123456" password => try to connect to the database
with u201Ctest12345u201D password < first 9 symbols of the password you used during the installation >.
Thank you and best regards, Natalia Khlopina -
We setup a server core single node cluster (W2012 R2). The MS DTC is running, and the Distributed Transaction Coordinator firewall rules are enabled. I can connect to the firewall rules and compmgmt.msc remotely for this server. When
I attempt to connect to the Component Services Management console with this server, the MS DTC object is not displayed. Only the COM+ applications are displayed. We've setup other server core instances with out clustering and DTC is displayed.Hi Steve,
We just finished the local test and found this behavior is by design. It’s expected that we can’t see the DTC remotely from component services for a cluster node.
In my lab, 2012R2 node3 is a single node cluster and has DTC role. -
Why the non-cluster SQL Server appeared in the cluster nodes list
1, I install the node rs6 standalone, Why it appeared in the cluster node list by inquiry the dmv?
2, how to removed the rs6 from the cluster node list ?
by "set -clusterownernode -resource "XXXASQL" -owners NODE1,NODE2"?
But how to find the resource name? I tried to use window cluster name, SQL cluster name, and SQL role name , All of them say failed to get the cluster object.
3,how to set the owers to {}, I try below, but failed.IMHO, sys.dm_os_cluster_nodes DMV is associated with the SQL Server
Operating System (SQLOS), sys.dm_os_cluster_nodes returns one row for each node in the failover cluster configuration.
As you are running standalone instance on cluster I am assuming this information is being picked from
OS and not from RS6 SQL instance.
As you have confirmed Is_cluster is false and if you don’t see RS6 instance in failover cluster manager I don’t think anything damaged here. Everything looking as expected, dont change owner node as its standalone instance. -
Problem accessing sql server cluster node
Simple two node cluster configuration with SQL server 2014 and Windows Server 2012. When node 2 is active, remote client access to SQL server works fine through SQL Management Studio. However, when node 1 is active, remote client access will
not work. Node 1 was installed first, and node 2 was the added node when SQL server was installed. All other settings have been confirmed to be the same. Anyone have any ideas????
TIAHi TIA,
Did you try to disable all the node firewall and try again, any error information you got when it fail connect to SQL cluster?
Best Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi,
The doc. seems to indicate that the content server is not cluster-aware. When we use WebLogic we don't want to rely always on the WebLogic's cluster failover capabilities. There are too many things running on WebLogic.
Can I access a content server cluster that is separate from WebLogic ?
Thanks,
MohanHI,
It is supported on sun cluster. You can use Apache 2.052 and MaxDB 7.6
Anirudh, -
Content Server Configuration issue
Hi Gurus
I am working on Content server configuration.
Installed Content server (640 build 201 ) on Win 2003 server
- Using SAP ECC 5.0
- This is initially our test environment so here we are not using any certificates
I am facing issue with TXN (si24_csconfig) configuration of newly installed content server.
It flash error "error occured while creating depositories"
Please note that this transaction will go on for some work if i try administrator user, which is the user for NT server where content server is installed. With any other user it again prompt for password and will not move forward untill I provide this user-pwd.
When I check in txn slg1 log following is the error message:
HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s
Please suggest.
Best Regards
JaswantHi,
Give the following parameter in CSADMIN for windows:
Driver MaxDB
Immediately the error goes away.
Regards,
Phani.
Maybe you are looking for
-
Select open items for a settlement amount
Hi All, I have a requirement to do a clearing with situation like this, upload a excel file contains of settlement amount. This amount will use to clear up the payment JV save earlier (open items) for example: settlement 57.00 then the open item docu
-
WINDOWS 8 DID NOT SUPPORT MY PALM ZIRE 72 PROGRAM. LOST ALL DATA.
My new windows 8 computer does not support my Palm Zire 72 software. I had my handheld charged, but unplugged and lost all my data since there was no backup. I have my old hard drive with most of the backup on it. Is there any way I can get this data
-
How to restore a class after I delete it?
Hi, I deleted a class incorrectly. Can I restore it? It's very important for me. Thank you very much!
-
Reconciliation between uninvoiced receipt and Trial balance
hello, i can't reconcil between URR AND TR.i have a big diffrence amount in account accruel. the setup is at receip for the both expence and good. what should the paramater that i put and the right time to URR. or is there another parameter that i ha
-
Converting binary data to cluster
Hello, I have a problem converting binary data to a cluster. I have to create a VI that reads out some parameter from a device, which is connected via RS232. I get an array of 128 Byte from the device. The data has the following (C-)structure: struct