Failover cluster node - You do not have administrative privileges on the server 'servername' ?

Hi Hello & Good morning Technet's,
I would like to post a question which i really expecting a solution.
I got 2 domain in one single forest.
Domain 1: hg.corp
Domain 2: iac.corp (iac.corp
is a tree domain under hg.corp forest)
Trust : Transitive
trust between hg.corp and iac.corp
Domain controller 1: dc.hg.corp
(for hg.corp)
Domain controller 2: iacdc.iac.corp
(for iac.corp)
I want to make a Fail-over cluster between this 2 domain controllers ( But both are in different domain literally, but in same forest )
Process Validate cluster in dc.hg.corp
dc.hg.corp can added, but iacdc.iac.corp failed (Error: You do not have administrative privilages on the
server 'iacdc')
Process Validate cluster in iacdc.iac.corp
iacdc.iac.corp can added, but dc.hg.corp failed (Error: You do not have administrative privilages on the
server 'dc.hg.corp')
Technet please provide me a solution for this issue, So i can reduce server box counts.
Thank you & Have a nice day.
Shamil Mohamed

Hi,
We do not support combining the AD DS role and the failover cluster feature in Windows Server 2012.
This behavior is by design.
The related KB:
You cannot add a domain controller as a node in a Windows Server 2012 failover cluster environment
http://support.microsoft.com/kb/2795523
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Suddenly cannot connect to server "you do not have permission to access the server"

I am one of only two Macs in our office.
Up until now I have been able to connect to our shared folders/server just fine. Occasionally and randomly I would seem to get booted off, but would just log back in.
Now suddenly I get "Connection Failed You do not have permission to access this server".
I seem to get it whether its cifs, afp or smb.
After it denies the connection it also boots me from email. As soon as I cancel the attempt to connect the email recognizes my password again.
I have tried rebooting, repairing permissions and having our network admin change my password and nothing seems to work.
If I enter an incorrect pw it recognizes it as such. I only get the above message when I use the correct username and PW.
Additionally if I go to the other mac in our office I am able to connect using the same credentials without any problem.
This is via ethernet.

i also got the same problem on my ipad i have tried every thing i dont knw hw to fix this problme any solution. ???????????????????????????????????????????????????

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update." I have it set as adminstrator as the user.

I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update." I have it set as adminstrator as the user. I am running Windows 7 Ultimate. Help please?

Thanks, but I've done that several times & it still says I need administraive privileges. I had itunes installed with no problems until I did the latest update. After that it just disappeared, so I tried reinstalling. Now I can't sync my phone. This is so frustrating!

You do not have permission to view the System Landscape Directory.

Hello there,
When I accessed my SLD from portal, it took me to the page but kept saying:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I searched on these forums for the above error. Got some results, but nothing really substantial that has helped/fixed my problem.
I also read a bit on SLD from the pdf file named: System Landscape
Directory of SAP NetWeaver 2004s
I also worked on the security roles and actions to individual
users or user groups like for ex: the above pdf file advised I map the security roles from Visual Administrator, to the created roles in the portal. I've done that too. Like create a user group: 'SAP_SLD_ADMINISTRATOR' and create a user role corresponding to it, which would be: 'LcrAdministrator'
Then, I went to visual administrator, and clicked on 'Assign User Groups to Roles'
Even after this, I tried to access the SLD from portal: It is still giving me the same error I mentioned above in bold italics.
Can somebody please help me how to fix this issue?
Thanks
Dino.

Graham:
Thank you very much for making the effort to reply to my query.
But, it still hasnt solved my problem yet.. for some reason even though I followed your instructions and did what you advised.
I have attached a screenshot of my Visual Administrator screen that you advised me to modify/change.
Here it is: http://img166.imageshack.us/img166/2259/screenshot002co1.jpg
After I made the changes, I restarted the J2EE server and went to my portal SLD page: [http://org-x:50000/sld]
Tried authenticating usernames: LcrAdministrator and Administrator.
Both attempts resulted in the same error show below:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I am wondering, if you would have another workaround regarding this issue, can you please let me know?
Thanks
Dino.

ITunes Get Artwork: "Artwork for [album name] cannot be found. You do not have permission to access the requested resource."

I just installed iTunes 10.5 (latest version as of 11 Jan 2012), onto a computer running Windows 7 Ultimate x64. I loaded my music library into it, it compiled the list and separated them by album. But even though I'd assigned most of the albums artwork through my Zune management software (a Microsoft product), almost none of them populated into iTunes. So I went through and started asking the software to try to find album artwork where possible.
I did this a few times album by album, then I decided to select multiple albums and see what happened. No problems. Then I selected all of the albums I had--about 600 in all--and asked it to get artwork. It seemed to process for a bit, then came back with the error, "Artwork for [album name] could not be located. You do not have permission to access the requested resource." I tried this on several individual albums, only to receive that same error.
The very first time I did it, I was told I needed an account with the iTunes store to make it work, so I signed in using an old Apple ID (the account had been inactive for so long it had been locked for security, I unlocked it and that seemed to be that). Then I did what I described above.
The weird thing--to me--is that I can still add artwork to the albums manually if I want to, from imagery stored locally on my own computer. The only thing it seems to have a problem with is when I ask it to go find artwork from the iTunes store.
Do I need to uninstall iTunes and then reinstall it? Did something go wrong with the process of authorizing the computer to work with the iTunes store? Do I need to de-authorize and then re-authorize the computer? Could this be something related to Windows permissions on the iTunes library?

Right on about how to reset the warnings, it was exactly that.
I went through the steps to let iTunes through Windows Firewall, but still get the same problem when I access the iTunes store (and even though I followed the steps in the help file to the letter, I notice it still says iTunes is NOT enabled for it). And now, thanks to the re-enabled warnings, when I try to get it to download artwork for single albums, this is what I get:
"Artwork for [album name] could not be found. An unknown error occurred (-50)."
New results from the diagnostics too:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire 8930
iTunes 10.5.2.11
QuickTime 7.7.1
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0034AA84038F17E0
Current user is an administrator.
The current local date and time is 2012-01-13 09:21:52.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9700M GT
**** External Plug-ins Information ****
No external plug-ins installed.
The drive Q: SEMC CD-ROM Rev 0001 is a USB 1 device.
iPodService 10.5.2.11 (x64) is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {403AFC2C-1FCE-43B2-B9E8-D414B29FF5D1}
Description: Intel(R) WiFi Link 5100 AGN
IP Address: 10.100.3.244
Subnet Mask: 255.255.248.0
Default Gateway: 10.100.0.1
DHCP Enabled: Yes
DHCP Server: 10.100.0.1
Lease Obtained: Fri Jan 13 09:00:56 2012
Lease Expires: Sat Jan 14 09:00:56 2012
DNS Servers: 202.174.158.10
8.8.8.8
Adapter Name: {B50EA825-FB09-459D-8855-77E5A43E18B1}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:30:00 1970
Lease Expires: Thu Jan 01 04:30:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Basic connection to the store failed.
An unknown error occurred (-50).
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-01-12 07:09:14.

You do not have permissions to open the dashboard

On a clean install of 2012 R2, I joined an existing domain and added the Essentials role. After that, I configured it which took about 5 minutes. At the end, it placed an icon on the desktop called "Dashboard". It will not allow
me to open this no matter what I try. I get this error:
Cannot open the Dashboard
You do not have permissions to open the dashboard. Please log on as a network administrator and try to open the dashboard again.
I am using a domain admin account. For laughs, I tried a couple accounts, but had no luck.
The log at "C:\ProgramData\Microsoft\Windows Server\Logs\dashboard.log" shows "Dashboard.Forms: Dashboard: Non domain admin cannot access dashboard."
Server Manager shows a green up arrow by Manageability for WSEE.
BPA shows only one error about Windows Server Backup and unsupported partition, which from what I gather is to be ignored as a false alarm.
Not sure what to do here. Nothing seems to work. Ideas? Suggestions?

Hi everyone!
I went in and tried all of your solutions, but none worked.
I have found the REAL solution to why this isn't working, and it should be corrected by Microsoft.
In the users profile, you can see the member of and primary group.
With my admin account, on Primary Group, I had "Domain Admins" as the group. It didn't work. I tried setting that to Enterprise Admins, and it worked and was able to get into dashboard. I set it back to Domain Admins, and it didn't work.
I set it as Domain Users, and it worked.
As long as you have the user in Domain Admins group, and primary group set to either "Domain Users" or "Enterprise Admins" -- it will always work. The account does NOT need to be in the Enterprise Admins group, just be sure to keep the
primary group on "Domain Users", and make sure it is in the "Domain Admins" group.
When the member above Lynn said they created a new account, it worked because ALL new user accounts are set to primary group of "Domain Users".
When the other user Brian Hoyt had to remove ALL administrator groups, it removed the primary role from "Domain Admins" to "Domain Users" which then worked. Then he added ALL admin groups (you do NOT need Enterprise Admins group) but
probably forgot to set the primary group, which is good and that is why it worked. When he copied the Admin account, the primary group always rolls over to the new account and is copied with it. When he removed all groups, he forgot to set back the primary
group.
When Robert Pearman tried, he probably had the primary group set to something other than "Domain Admins" as well.
You don't want a Domain Admin (primary group) configuring your server. You want a domain user in Admin group (such as an employee to reset passwords), OR the Enterprise Admin (primary group) to configure server applications, NOT a domain admin. So
I do see why Microsoft had this set the way it is.
So basically, you can NOT have the primary group to "Domain Admins". It needs to be either "Domain Users" OR "Enterprise Admins". The account MUST be in the "Domain Admins" group.
I do believe Microsoft should fix this issue, because it could be a bug, but also could be so that Domain Admins (primary group) can't screw applications that should be maintained and configured by Enterprise Admins (primary group).
I have made a video showing the problem was fixed, and this is the solution!
youtube.com\watch?v=bZoNc3RkBSw
Thanks guys!

ERROR: You do not have sufficient privileges to complete this installation

When attempting to install iTunes 9.0.1, I receive this message just after the installation begins: You do not have sufficient privileges to complete this installation for all users on this machine. Log on as an administrator and then retry this installation."
I am the administrator of this machine. I have tried installing in a different directory of the all users folder, however that failed with the same reason. This PC has had some anomalies of late so this may not be iTunes, but I'm without clues as to where to go to fix this.
Thanks for any clever ideas you may have. I miss the music.
Gina

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

ERROR: You do not have enough privileges to add this item.

On any new web App Items , or any new Web Apps created getting the message when attempting to do update (logged in as user and can access the item in edit)
ERROR: You do not have enough privileges to add this item.
The same user id can do updates to other web app web app items that already exist, the user is assigned and can login and select edit and add the content , but submit the web app item update results in succfull update.
What does the message ERROR: You do not have enough privileges to add this item specifically indicate when the user is
assigned to the web app / web app item,
web app is designated as edit enabled for assigned user
item is active and
can update other web apps and can login to the web app in question but
can not update newly created items without the message.
Appears to me any web app that is new or modified is getting the error, existing ones are ok.
(happens on different browsers, cache cleared, logins not remembered, manual login actioned)

Hi,
I've checked your site users and it show each having full administrative permissions.
Unfortunately I'm not sure why this error would prompt otherwise. Please reach our direct chat support to help investigate this further if the error continues.
Kind regards,
-Sidney

"You do not have sufficient authority for the step" - Help!

Hi everybody!
I was just sitting, listening to music and suddenly I get this message from iTunes saying:
"iTunes-libraryfile can not be saved. You do not have sufficient authority for the step."
(it's translated from Swedish so it might not be what you with a english version would see)
I am the administrator (even made that sure by using the control userpasswords2 i run) so I have the highest authority (or have I?). I had an other problem before that was that I iTunes wouldn't quit but it turned out to be the antivirus software that mad me a mess (and still does).
I haven't yet updated to 7.02 but I'm running on 7.01. I'm going to update now but you can still give me explanations and solutions to my problem.
Oh yeah the question (if you haven't got it yet),
what should I do so the "You do not have..." doesn't come up and how to sole it (maybe the same thing I don't know :P)?
Antivirussoftware: Norman Antivirus
Many thanks!
Waldemar
Fujitsu Siemens Windows XP Home Swedish version

SPAM

You do not have rights to access the data in the universe - WIS 00505

Hello,
Trying to create my firs WebI report above Universe, I entered the InfoView, and selected new Web Intelligence report. After drug and drop the objects I want to display, when I press the run query button I get the message "you do not have rights to access the data in the universe .Contact BO Administrator Error WIS 00505". I already implemented note number 1299687.
What can it be?
Thanks,
David

Hi David,
please make sure that the BOBJ user you are using to create the report has appropriate rights on your universe AND the underlying connection. You can set the authorization for this kind of objects in the CMC under Universes and under Connections .
Regards,
Stratos

You do not have sufficient privileges...

My Apple Genius archived and restored my MBOP last week. "Lost" a coupe registration codes and my printer - but those were easily resstored.
I am now receiving an errormessages when trying to update a few registered third party apops (MailSteward, Alarm Clock Pro).
"The operation cannot be completed because you do not have sufficient privileges for some of the items..."
I can right-click on the app's folder, and reset the permissions. But is there a way (a "batch file" in old Windows-speak) to set all apps up with the "proper" permissions? I am the only user on this machine - just one account has been established.
Clint Bradford

Select all of the application folders, press the Option, Command, and I keys simultaneously, and then change the permissions as desired. If this method doesn't work, open the Terminal in the /Applications/Utilities/ folder and run the following:
sudo chmod -R a+rwX
followed by a space. Next, drag all the folders into the Terminal window, press Enter, and type in your administrator password; nothing will appear in the Terminal while the password is being typed.
(21466)

My iPhone 4 has been saying You do not have permission to access the requested resource whenever I try to watch one of the episodes I bought from iTunes. It will not let me watch them and I don't know why.

A few days ago I bought a season of the series Psych off of iTunes. I was able to watch the first bunch without a problem but now all of a sudden when I try to watch one it says "You do not have permission to access the requested resource". I tried restarting my phone but that do not help. I cleared up a lot of space on my phone as well. I have and iPhone 4 with the update of iOS 6.1.3.

Are you using the same Apple ID that the purchase was linked to? I had this issue with a shared device, and the other person had logged out of my ID and logged in with hers.
If it's the same ID, then try redownloading the purchase.

When a Safari download is interrupted, I get the message "You do not have permission to access the requested resource" when I try to restart it.

I have had this issue with my Macbook Pro ever since I bought it in November. If I start downloading a file with Safari, and the download gets interrupted, I am unable to resume downloading from the point where it was interrupted. Clicking on "resume downloading" button in the downloads list works fine it I do it immediately after the download is interrupted, but if a little time has elapsed (as little as a few minutes) since the interruption it will not let me resume the download, and I get the message in the downloads list "You do not have permission to access the requested resource." I have repaired my permissions...I don't know what else to do. Here's my system configuration:
Macbook Pro Mid-2012 Retina Display
2.3 GHz Intel Core i7
8 GB RAM
System 10.8.2
I just have to editorialize for a moment: My old Macbook Pro and my Mac Pro both worked great with Snow Leopard, but since upgrading the Mac Pro to Mountain Lion and buying the new Macbook I have had all kinds of issues like this. Tech support at Panic software, that I contacted because of issues with some of their software, told me that I was only one of many with Mountain Lion issues, but here we're over half a year since the release of 10.8 and we're only on system 10.8.2. Is anybody at Apple actually trying to fix the issues?
Thanks for anything you can tell me!

If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback

IPhoto Library locked in Yosemite; You do not have permission to open the document "iPhoto Library"

Long story to get to the iPhoto part but may help someone who is in-the-know about what can be done for me...
I turned on my computer a few weeks ago (iMac 27" late 2012, 2.9GHz Intel core i5) to access some photos in iPhoto and it would not load to the home screen but gave me the Disc Utilities Menu. From memory the options I had were; (1) Restore from Time Machine Back-up, (2) Re-install OSX, (3) Get online Help, (4) Repair or Erase using Disc Utility.
I tried Repair in option 4... no success.
I tried option 1 as I have my internal HDD backed up to an external HDD via Time Machine in case anything goes wrong... no success.
I tried option 2 (which was Mavericks) and it loaded and took me to my desktop.
When I tried to opened the iPhoto app in the dock there were no photos in it.
After searching forums and the internet they suggested it may have been an iPhoto upgrade issue so I tried to update iPhoto but found it was already up-to-date.
After looking, I found that the "iPhoto Library" in "Pictures" had a red circle with the white dash through it and was locked. When the "iPhoto Library" folder was double clicked I got the message "You do not have permission to open the document “iPhoto Library”.
In all the trouble I have upgraded to Yosemite 10.10.3 (with Photos 1.0) and am obviously still having the same warning/error message come up when the iPhoto Library folder is clicked.
Right click won't allow me to view package contents.
The "Import" function in the "Photos" app won't do anything with the folder, and the "iPhoto Library" folder looks and functions the same in all of the back-ups on my external HDD Time Machine.
I don't care if I need to use "Photos" or "iPhoto" but I do need to get the photos out because they are irreplaceable. If had know this problem was possible (especially while using Time Machine) I would have manually stored and backed my photos up in folders on another external HDD.
Any help would be greatly appreciated, feel free to ask any additional Questions (but this is the first time I have posted in the forum so hopefully I can work out what is going on if you do reply to this post )
Cheers.

Thanks for the suggestion. I had tried this earlier with no success either. Even with the padlock unlocked I can't even change the tab that says "OPEN WITH". I still get the... "You do not have permission to open the document “iPhoto Library” message. You may also it continues to say "Fetching" where it should say my user name at the bottom.

Failover cluster node - You do not have administrative privileges on the server 'servername' ?

Similar Messages

Maybe you are looking for