Clusterware/DB Setting For Low Resource System

I'm trying to Install oracle Clusterware on Redhat Linux Using VMWare and it Crashed twice after Successful Installation.
The Node Hangs Whenever I Start Clusterware and Database on a Node and try to change config of any clusterware resource.
Can Anyone help me in Setting proper Settings for
1) Linux Hangcheck Driver
2) RAC Timeout and Failer Detection parameter for CSSD/CRSD and VIP Parameters ?
Thanks and Regards
Prakash

What do you mean 'and try to change config...' Does it only crash when you attempt this ? If so what are you doing exactly.
On your un-support configuration you may as well leave the hangcheck timer off if you think that is your problem
Philip...

Similar Messages

Introducing Lowarch - Arch for low-end systems

Some of you might remember that I mentioned my plans of making an Arch install cd for low end systems. I've come quite far with this project now.
First, I must say that it was a lot harder than I first expected. So I can say I have learned a lot in the process.
Second, before I start ramblig about where I am in the process, I'll just outline what the plan is:
The best Linux distribution is Arch Linux, because of it's speed, simplicity and elegance in design. I often get hold of some old laptops which are too old for Arch (i586 normally, but also i486). I have tried a lot of distros made for low end systems, but I always end up thinking, ah how wonderful it would have been to have Arch on this. It would have been the perfect distro for this machine.
And the more I thought about it, I realised that even though Arch is perfect for super modern systems, it would be even more perfect for old systems, because of it's speed and simplicity, and not least the choice of packages.
Some have started projects to port Arch to i586. I don't think that is the best solution. A lot of Arch isn't really useful on these machines. Therefore I decided to make a new distro based on Arch, where the main difference is the choice of packages. You don't want to run a video editor on a i586. For now I've called the distro Lowarch.
Here's what I have done so far:
1st try:
Oh, I just change the compiler flags to i486 in /etc/makepkg.conf and start compiling all the packages. That worked great. Almost everything in base compiled fine. Until I started to notice the strange i686's coming up in all the ./configure outputs, and when I tried to install some of it on my i586, a lot of Illegal instruction messages came up.
After doing some research, I understood that some programs make static links to libraries, all of which, of course, are i686 coded on my system. I realised I needed to do this differently. Of course I didn't want to do all the compiling on a 486 machine.
2nd try:
I made a Cross Linux From Scratch system, compiled for i486. Even that I had to make twice, for a lot of programs check what processor they are running on and compile for that. So the second time I used a so-called uname-hack. A small kernel module which makes the kernel report that it's running on an i486 machine.
When I had a basic build system, I compiled pacman, and started to build packages. This time I had to take care of the order for dependencies to work out. First kernel-headers, glibc, etc. I installed one package at a time into an empty directory with the pacman -r option.
After having the base system compiled, I booted it, and (using the uname-hack still) continued to compile the other packages in current, and the ones that I wanted from extra.
It was really hard, since a lot of packages just don't compile with recent glibc and gcc. I have learned a lot about writing small patches just to make gcc happy or take away symbols not used anymore etc. The dependencies in the pkgbuilds are not always correct when it comes to building packages. Sometimes, and this is the most frustrating, packages seems to build correctly, but because some library wasn't installed or whatever, a few files are missing from the package, and I have no way to know, untill something goes wrong. Often this wrong is a package not compiling because include files are missing.
Another problem was to make an installer. I decided I just wanted a simple installer, like Arch has. So I compiled busybox and made an almost exact copy of the 0.7.2 install cd, just compiled for i486, and with my package selection on it.
What's left to do:
1. Look more closely at the package selection. If there are people who are interested in this we can have some nice discussions about this. There are a lot of packages I just don't know what is for, and therefore I don't dare take them away.
2. Clean up the PKGBUILDs, e.g take away references it the i686 and 64bit arch.
3. Compile the whole set of packages again, just in case.
4. Releasing it.
I've set up a wordpress page at lowarch.linuxophic.org, which is empty now, but where I'll put out a link to the iso when it's ready.

Yes, I think it would be smart to check out the PKGBUILD once in a while and see if they are still able to build packages. It seems this is only done when new releases arrive.
The thing about old programs not compiling with newer glibc and gcc or other libraries is unavoidable, and there's an unending stream of patches to address this issue. If a package hasn't had a release for a year, it's quite common that a change in a library it depends on will break the compilation. When or if new releases come, they should usually fix this.
Of course, PKGBUILDs of current packages should work with a current system, not with a system from last year, if their supposed to be of any use. But it's a huge job to keep this up to date at all times, and you need some programming skills to do it, and I would rather have the devs focus on more important things, like updating packages and making everything work even better.

No location set for Topic resource MessageDrivenBean

i get the following error while trying to run a message driven bean:
Error deploying file:/E:/jdev1012_base/jdev/mywork/MDB/Model/classes/ homes: No location set for Topic resource MessageDrivenBean MessageDrivenEJB
Error in application current-workspace-app: Error loading package at file:/E:/jdev1012_base/jdev/mywork/MDB/Model/classes/, Error deploying file:/E:/jdev1012_base/jdev/mywork/MDB/Model/classes/ homes: No location set for Topic resource MessageDrivenBean MessageDrivenEJB
05/10/24 20:09:32 done.
05/10/24 20:09:32 Error instantiating application 'current-workspace-app' at file:/E:/jdev1012_base/jdev/mywork/MDB/MDB-oc4j-app.xml: Error initializing ejb-module; Exception Error in application current-workspace-app: Error loading package at file:/E:/jdev1012_base/jdev/mywork/MDB/Model/classes/, Error deploying file:/E:/jdev1012_base/jdev/mywork/MDB/Model/classes/ homes: No location set for Topic resource MessageDrivenBean MessageDrivenEJB
the bean is initializes after this error. but it seems to be not working.

To develop Message Driven Beans, select EJB in the Component Palette, and select Message Driven Bean in Component Palette list. A UML diagram, and a Message Driven Bean node gets added. Select the Message Driven Bean node. A EJB Module Editor gets displayed. Select Enterprise JavaBeans>Message Driven Bean in the EJB Module Editor and configure a Message Driven Bean.

Reimaged System is Receiving Deployments Set for Its Old System Name

Our organization (post-secondary) cascades computers from the student labs to the staff, and it's time for me to give the staff their "new" computers. This morning I reimaged a system (Dell Optiplex 380) that once belonged to a student lab in preparation
for doing my first USMT. The computer was called TE-MHD11-03 when it was a student computer. It hadn't been booted since July-ish, and the new computer that replaced it is working fine using that name. The new name for the old system is PA-15cascade03, a completely
new and unique name. But something strange happened. All of a sudden, it started installing an Adobe product, even though I've never added it (since imaging) to any collection related to our Adobe deployments. A co-worker found it sitting in the deployment
collection for that software, and I can only assume that when it had the name TE-MHD11-03 it was added to that deployment collection.
I can't be certain, but I believe some common identifier (MAC address, I'm guessing) has stayed behind in the SCCM database and is causing this. My problem is that I have a couple dozen more cascades to complete. I don't know what the fix is for this, and
I'd kinda like to fix the issue for all of them at once, instead of one-at-a-time. Any suggestions?

Ah, gotcha. The Adobe collection in question doesn't use any queries, just direct rules for membership.
Another tech around here said as much (re: deleting the resource first), and I plan to change my procedure going forward. But it's too late now for the systems I've already replaced. Is there a way to search/delete those systems from the database without
affecting the new systems that replaced them?
I see in this article:
Managing Conflicting Records for Configuration Manager Clients that we can manually choose to create a new record for duplicate hardware IDs. Unless I'm misunderstanding the purpose of that option, could we use that to fix this issue?

Setting for "Rely on system fonts" does not work

Hello,
Some time ago I wrote a VBA function that would print a worksheet to pdf. It worked great. I reformatted my system, and now the code no longer works. When I run the routine, I receive the error message, "When you create a PostScript file, you must reply on system fonts and use document fonts. Please go to the printer properties, 'Adobe PDF Settings' page and turn OFF the option 'Rely on system fonts only; do not use document fonts."
I have changed this setting within the Adobe printer setting in Excel, I have changed it in both the 'Printing Preferences" and "Printer Properties" with the Devices and Printers Windows dialog, and I have confirmed that it is turned off in the binary registry key "HKEY_CURRENT_USER\Printers\DevModePerUser\Adobe PDF". Also, I have applied the Acrobat 9.4.2 patch. Yet still I get the message when my code is executed....
There were a few changes between my system from before my reformatting. The common items were Windows7 64-bit, Adobe Acrobat 9. The changes were that I went from Microsoft Office 2010 64-bit to Office 2010 32-bit. Windows 7 SP1 is now installed. Also, both Acrobat and Office are installed on my internal "Data" drive, rather than the "C" drive where my operating system is installed.
Although I do not see an issue with code, since it worked for months, I have included it below (the printing code is at the end). Any help would be GREATLY appreciated!
Public Sub EnumOrder(ByVal lngLine As Long)
'lngLine is the line number to start enumeration at
Dim strStore As String
Dim strFileName As String
Dim strTmpPath As String
Dim strPDFPath As String
Dim c As Long
Dim x As Long
Dim lngErr As Long
Dim wsPicklist As Worksheet
Dim wsTemplate As Worksheet
Dim oPDF As PdfDistiller
Set oPDF = New PdfDistiller
Set wsPicklist = Worksheets("Phase II Picklist")
Set wsTemplate = Worksheets("Template")
strStore = wsPicklist.Cells(lngLine, 1).Value
' Clear formatted border on order template
wsTemplate.Activate
wsTemplate.Range("A7:L56").Select
Selection.ClearContents
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
Selection.Borders(xlEdgeLeft).LineStyle = xlNone
Selection.Borders(xlEdgeTop).LineStyle = xlNone
Selection.Borders(xlEdgeBottom).LineStyle = xlNone
Selection.Borders(xlEdgeRight).LineStyle = xlNone
Selection.Borders(xlInsideVertical).LineStyle = xlNone
Selection.Borders(xlInsideHorizontal).LineStyle = xlNone
wsPicklist.Activate
' Initialize variables
strFileName = wsPicklist.Cells(lngLine, 1) & "-" & wsPicklist.Cells(lngLine, 2) & " " & Format(wsPicklist.Cells(lngLine, 4), "mm-dd-yy") & " Team" & Format(wsPicklist.Cells(lngLine, 3), "00")
c = 7
x = lngLine
' Add store order data to the template
With wsTemplate
    ' Add header data to the order template
    .Cells(1, 2) = wsPicklist.Cells(lngLine, 1) ' Store #
    .Cells(2, 2) = wsPicklist.Cells(lngLine, 3) ' Team #
    .Cells(4, 2) = wsPicklist.Cells(lngLine, 4) ' Deliver By
    .Cells(1, 5) = wsPicklist.Cells(lngLine, 13) ' Ship To Name
    .Cells(2, 5) = wsPicklist.Cells(lngLine, 14) ' Ship To Address
    .Cells(3, 5) = wsPicklist.Cells(lngLine, 15) ' Ship To City/State/Zip
    .Cells(4, 5) = wsPicklist.Cells(lngLine, 16) ' Comment
    ' Add line items to the order template
    Do
        .Cells(c, 1) = wsPicklist.Cells(lngLine, 6) ' Part #
        .Cells(c, 2) = wsPicklist.Cells(lngLine, 7) ' Part Name
        .Cells(c, 7) = wsPicklist.Cells(lngLine, 8) ' Qty Ordered
        wsPicklist.Cells(lngLine, 10) = Now         ' Date Printed
        wsPicklist.Cells(lngLine, 11) = strFileName ' File Name
        lngLine = lngLine + 1
        c = c + 1
    Loop While strStore = wsPicklist.Cells(lngLine, 1)
End With
'Create formatted borders on store order template
x = lngLine - x + 6
wsTemplate.Activate
wsTemplate.Range("A7:L" & x).Select
With Selection.Borders(xlEdgeLeft)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlEdgeTop)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlEdgeBottom)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlEdgeRight)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlInsideVertical)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlInsideHorizontal)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
' Print the store order to PDF
strTmpPath = "D:\Eric\Desktop\WIS-Speedway\Phase II\Picklists\New\Tmp\"
strPDFPath = "D:\Eric\Desktop\WIS-Speedway\Phase II\Picklists\New\"
wsTemplate.PrintOut copies:=1, preview:=False, _
ActivePrinter:="Acrobat Distiller", printtofile:=True, _
collate:=True, PrToFileName:=strTmpPath & strFileName & ".ps"
oPDF.FileToPDF strTmpPath & strFileName & ".ps", strPDFPath & strFileName & ".pdf", ""
' Set active cell to next store order
wsPicklist.Activate
wsPicklist.Cells(lngLine, 10).Select
End Sub

Ok, I have given up the ghost on this problem. I found a MUCH better solution to the problem that I was having, that also has the side benift of processing far faster. See http://msdn.microsoft.com/en-us/library/ee834871(office.11).aspx for details. Basically, I am now using the VBA ExportAsFixedFormat method, rather than Distiller. Hope this helps.

Invoice block for lower invoices prices

In MIRO SAP blocks invoices for higher prices.
As SAP standard Invoices are not automatically blocked for price and quantiy differences exceeding lower tolerence.
Is it possible to do it for lower invoice prices.For lower price I want to make ZLSPR =R(Invoice Verification)

Hi,
I am not sure but I remember seeing the setting for lower limits on the same place where you set the higher limits.
Please have a look into the t.code: OMR6, if you haven't. Here, maybe, you need to check the type of the tolerance key used for your requirment.
Hope this helps,
Sumant.

SDK optimizing for low system resources

Hello,
I'm temporary working on legacy Pentium 133MHz machine with 64MB RAM Win98SE. After multiple unsuccessful probes with J2SE SDK 1.5.0.04 and previous version I stayed with JDK 1.1.8. It works without errors at least.
My question is:
does it possible to optimize recent versions of SDK for low system resources removing unnessesary features, modules, libraries etc.?
Thanks
Antanas

Video editing via USB drive does not really work... the data transfer rate is too slow... you need eSata or Firewire 800
eSata Dock http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all program installs
2 - 320G WD Win7 swap file and video project files
3 - 1T WD all video files... read and write files
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for easy video editing
One hard drive is not as good as two which is not as good as three

Is there any way I may set low resources priority for a specific job or even all SQL jobs?

Is there any way I may set low resources priority for a specific job or even all SQL jobs?
Our database is quite big and everything works OK and very fast, except SQL jobs which are used mainly for maintenance purposes.
I have one specific job which runs for 2 minutes and takes a lot of resources which may affect execution of other stored procedure which should be executed fast.The worst part is that this job has to be executed during the most active working hours. It does
not matter for me how long will it take to execute this job. I just do not want it to use so much resources.
Also I noticed when SQL backup job (takes about 4 minute) is scheduled it also takes a lot of resources and sometimes because of that I am receiving "login timeout" error on my web site.

depending on you sql server version and edition, you can use resource governor and limit the cpu and memory.
in most typical cases , you can use the session user name and times and classify the how much cpu and memory they can use. refer : https://msdn.microsoft.com/en-us/library/cc645892.aspx
but in your case, the problem seems to be with the maintenance jobs which could run as sql server service account.
also, if the backup are third party tool backup, you can specify the priority level and other options etc to make it less priority.
it is possible to do that even with native backups such as specifying the limiting buffercount, max transfer size, if the server is memory pressured. sometimes, stripping the backups to multiple sets across different devices, could help as well. even though
stripping the backups can introduce another complexity.
may be you need to rethink you back up\recovery strategy.
Hope it Helps!!

Can anyone help me with getting the best setting for me system

can anyone help me with getting the best setting for me system on cpufan it says my temp is 38c but on corecentre it says 42c can anyone help get my system overclocked any more but keeping it stable as well thanx in advance for the help

my corecenter temp sometimes says im at 60 cel at idle....and i have the most recent update...i would rely on speedfan for temp control...core center seems to always read 3 degrees higher than speedfan on my pc....
i wouldnt be too concerned...those temps are pretty low to begin with.

CS5 Bridge low on system resources

Everytime I open CS5 bridge and work on my camera raw files I get the foloowing error message: bridge low on system resources and needs to be closed. I never had this problem in CS4. I am running Windows XP Pro with 4gb of ram. I have talked to Adobe Tech support 3 times this week and have not been able to fix the problem. Is any one else having this problem?

I've experienced these exact same problems, and have been watching for anything useful to be added to this and one other thread.
( http://forums.adobe.com/message/2847218#2847218 )
I did install the update released by Adobe today (May 27) but unfortunately nothing has changed.
I was interested to read that you did not have these problems with CS4 (as I skipped that version and upgraded from CS3). So, it appears that this is a problem specific to CS5.
For now, my "workaround" is to abandon CS5 and go back to using CS3. NOT a great solution...or use of my money;but I have to get some work done!

System message setting for delivery.

Hi All,
I need to set message VL 261 Free goods group not complete as error message. I tried to do this setting at LE> shipping> system modification-->specify characteristic for system message.
But when i am enter error message number 261 it is giving error " enter valid value". But when I am creating delivery I can see that message in log as information. can any one help on this.
Thanks in advance.
Regards
Chetan

Hi Chetan,
for my understanding you can not switch "VL 261 Free goods group not complete as error message". If you look at the SAP customizing help you will see following information:
"The maximum possible message category is predefined by SAP. For this reason some error messages only have a limited selection of message catogories that can be set. Use F4 Help to find the maximum possible message category from the sequence 'E', 'W', 'I', ' '."
That means the message types predefined in customizing can be switched from error to warning and vice versa. BUT error messages not included can not be added or switched by customizing.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

If that's the best you can do why don't you get on another forum?

Cpio syntax in 10g Release 1 (10.1.0.3) Patch Set 1 for AIX-Based Systems

OracleÂ® Database Patch Set Notes
10g Release 1 (10.1.0.3) Patch Set 1 for AIX-Based Systems
Download and Extract the Installation Software
To download and extract the patch set installation software:
1. Download the p3761843_10103_AIX64-5L.zip patch set installation archive to a directory that is not the Oracle home directory or under the Oracle home directory.
2. Enter the following commands to unzip and extract the installation files:
$ unzip p3761843_10103_AIX64-5L.zip
$ cpio âidcv p3761843_10103_AIX64-5L.cpio
Of course cpio -i is expecting a standard input, so there a missing <
cpio âidcv < p3761843_10103_AIX64-5L.cpio
Best Regards
Laurent Schneider

Hi Laurent,
Apologies for the delay responding to your feedback.
The Document to which you refer does not appear to be listed on the pages my group maintains at: http://www.oracle.com/technology/documentation/index.html
We are not actually part of the OTN group.
Therefore, please try the Members Feedback forum instead at: Community Feedback (No Product Questions)
Thanks and regards,
Les

Str Loc Mandatory Setting for Project System PR

Hi
How can i make mandatory setting for a PR getting generated by project system thro the trans CJ20N.
Since its not an mandatory field the PR s from project based are not hv str loc in PR.
Also we are not able to edit the same. All the fileds are in PR in ME52N in grey colour whr the PR s from project based.
Vijay

if your material is not inventory managed, then you cannot have a storage location in the PR.
If it is inventory managed, then you can set the defautl storage location in material master MRP view field Storage location EP

How to set property for KM Resource in webdynpro Java

Hi all
i am trying to set the property for KM resource in webdynpro for java.
can anybody send sample code, then it will be great help to us?
Regards
Sunil

Hi Sunil,
check in sdn with thread name as
"Reading property from a resource via api, tricky one"
Koti Reddy

Clusterware/DB Setting For Low Resource System

Similar Messages

Maybe you are looking for