CM01 - How to see actual confirmed hours?

Hi there,
This relates to capacity planning for normal Production Orders.
I am able to use CM01 transaction to see planned labour hours (calculated from routing). However the report doesn't seem to show confirmed hours, or remaining hours (planned minus confirmed). This seems strange since it's a capacity report shouldn't we be able to see actual capacity too?
I know I can use COOIS to see confirmed quantity, but then it doesn't show Planned Orders which we also want..
Thank you!

Hi sfsm97,
I think what you are looking for can be found in a report called "Capacity Evaluation"
Go to Transaction code CM50 and give work center details.
you will get details like Rem.cap.reqs Avail.capacity Rem. avail. capacity
and as fat as your second question is concerned regarding details of planned orders.
Planned orders do not generate capacity requirement. So you will not get any details of that sort regarding planned orders.
I hope this helps you. Let us know if you need additional details.
Regards,
Abhay Kapase

Similar Messages

How to see Production(confirmed) quantity in Capacity leveling view

Hi,
I have some quantity with Production(confirmed).I am able to see that in Planning book.But not able to see that in Capacity leveling view.How to see that?
Thanks&Regards
Venkadesh

Anybody any help
Thanks&Regards
Venkadesh

How to see actual fonts while composing mail?

This is driving me crazy. I often copy and paste different bits of text from other sources into email messages I compose in Mail. When I paste in the text, it always appears to be in the same font and size as the existing text. Once I send the email, I discover, much to my chagrin, that the pasted text often shows up in a different font or style. This holds true even if I send an email to myself and read it in Mail. If it is just in a slightly different font it only looks a little sloppy, but it is very embarrassing when it is a radically different font or size.
Sometimes the errant font is applied to only fixed-width fonts, and I can fix it for my own display by setting my "fixed width font" and "message font" to the same thing. But this just makes it look better for me -- anyone else is still seeing the different fonts. And sometimes it happens with formatted text (i.e, pasting a line from a webpage where the text looks fine in the composed mail but shows as huge and bold when the mail is received).
I have my "composing - message format" preferences set to Rich Text, because I want to be able to send rich text messages. I have tried to train myself to use the "paste and match style" command, but I am so used to "command - v" that it is hard to remember to use "shift-option-command - v" every time.
If I change a font intentionally, using the format fonts palette, the different font is immediately visible in the compose window.
This happens on both my Macbook, not on my and my Mac Mini; they are each running Mail 3.6 and OS X 10.5.8
Any ideas? It is very frustrating.

Wish I could be king. But you described the problem perfectly and I am still but a pawn. All I can say is that I trashed the mail preferences (com.apple.mail.plist) on my Mac Mini, and now my MacBook seems to work right.
Sorry. :>) But that is the truth... The MacBook now has actually sometimes displayed pasted text in its actual, different, font and style as I paste it into a partially composed new mail message.
In other (more rational) words, the problem seems to be tied to pasting only certain types of text. I have not been able yet to pinpoint what. Yes, frustrating indeed. The only work-around has been to re-train my fingers to command-option-shift V, for "paste and match style" (like you, I do not want to always use only plain text). Maybe someone else will eventually weigh in with a real solution. The solution I want is just to be able to consistently see any font variations within my message before I send the email.
The info about the different ppi scales between Windows and Mac is interesting, although not relevant to this particular problem. It does explain the apparent overall size differences I have seen before.

How to see actual file sizes

I have several Keynote presentations, where I have recorded the presentation. One of them shows up as 370MB (from a previous recording), and the other one as .5MB (slideshow without recording). I get these same results if I re-open Finder, or view them in inspector. In terminal, the sizes show up as 272 bytes (I'm assuming because they are packages and not actual files). If I copy the files to another drive, they are about 14MB each, which reflects the actual size. How do I make Finder to show the actual sizes of the files (packages)?

Hi
You can use report painter .T-Code :KKO0.
Regards

I can't see an app on my iphone, but when i search i get it. i've made room for the icon to show up on screen, but how do i actually get the icon to appear?

I can't see an app on my iphone, but when i search i get it. i've made room for the icon to show up on screen, but how do i actually get the icon to appear?

On your iPad, just go to Settings>Mail, Contacts, etc.>Add account>iCloud and put in the details of the account you set up. Shouldn't be a problem at all.

How do i return calendar to original view?   All I can see is an hour by hour grid...can't get back to page where I can enter new appointments/events

How do I return calendar to original view?   All I can see is an hour by hour grid...can't get back to page where I can enter new appointments/events

     Hi, at the bottom bar you should see a series of five buttons. Press the "Month" button if you desire to see the view of the month. As for creating a new calendar event simply press the "+" button in the upper right-hand corner to create a new appointment. *
* Please note that this is all within the app called "Calendar".

How to see cost componentwise production order actual cost-not planned cost

Hi,
Can anybody tell me how to see cost componentwise production order actual cost ?
Thanks,
Bijay

Hi,
CO03->Goto-> costs-> Anlysis
or use the std. report KKBC_ORD
std. reoprt MCRI
KVBI - Actual Costs
Regards,
R.Brahmankar

How can I actually get a WiFi problem FIXED on my Mini?

OK, 32 years after buying my first Apple product (Apple ][+) I actually need hardware support for one of my products - an iPad Mini.
The result?
Worst. Support. Ever.
It has been THREE weeks since the issue, and tomorrow will be 3 weeks since my first call. The basic problem? When left for work my Mini would connect to my home network just fine, but when I got home it wouldn't. And hasn't since. On my network I also have 3 iPads (1, 2, 3), Macbook Pro, couple of iPod Touchs, Kindle Fires, Nexus 7, PC laptops, Android phones and so on.
- First, they pushed me off to Airport support and that involved loads of reconfiguration and restting. He left me with 'homework' of totally reconfiguring the network (2009 Airport Extreme and 2x Airport Express extenders).
- I finished all of that and it STILL wouldn't work, so I was on the phone, and they eventually decided to send a box to get a repair.
- I get the box a couple of days later - but it doesn't come with return info so I have to get the PDF to print and attach (which means another day before it goes out).
- They get the Mini at Apple, cannot reproduce the issue and turn it around ... but the email notice is late so I miss the delivery truck, and it ends up at ~6PM the next day before I see the Mini. Not surprisingly it doesn't work. Worse yet, I got my new iPhone 5 and it works immediately and perfectly on our network.
- I get on the phone again and although I ask for a PDF label so I can return the Mini, the person ends up sending out another box.
- The next day I take the Mini into work and it works great on WiFi (it had been spotty before, but they reconfigured it over the weekend), so I grab a WiFi analyzer for my Samsung Galaxy S3 and see it is broadcasting on both 2.4GHz and 5GHz.
- I wonder if that is the issue ... so at home I switch the bnetwork to 5GHz and the Mini functions immediately and perfectly. Of course I lose connectivity for about half of the other things. So I switch back to 2.4GHz, and unsurprisingly the Mini doesn't work but everything else does. I have found the problem (no thanks to Apple).
- So I call Apple that evening, and talk to a support rep, who listens for a bit but basically says that it is very likely that regardless of what he puts in the case notes that the support person would take the Mini out switch it on and if it worked they would put it in the box and return it.
- He put me through to someone else who he said would make sure that the situation was properly handled.
- Still concerned, when the box arrived (Christmas Eve), I put in a note detailing the issue and with big letters 'PLEASE DO NOT RETURN THIS IPAD MINI WITHOUT REPAIRING, IT DOES NOT WORK ON 2.4GHZ WIFI'. I wrapped that around the Mini with the writing on the outside.
- On the 26th I get a notice that it had been received by service.
- This morning I get a call from FedEx at 8AM to be expecting the shipment. Then a while later I get the email from Apple.
- Of course, as I checked the email I see that they did exactly the same thing ... returned without doing ANYTHING.
- So ... surprise, surprise ... it STILL doesn't work on 2.4GHz WiFi (but will work on 5GHz).
- So again I call. This time the person sends me to a 'supervisor', who assures me that they will do a swap and gives me a specific case # to take to the UPS Store where they will be able to get it shipped out to the correct warehouse and it will be resolved. He gives me the case #, and his name and contact #.
We got over a foot of snow, so it took a bit to get out, but I had to drive my son to a house to do shoveling as part of the local Youth Bureau, and then headed into town to the UPS Store.
You probably know what is coming - when I get there they cannot pull up any info on the repair ID, nor by my phone number. And when I check the email on my iPhone there is nothing new from Apple Support, meaning that Jason didn't actually DO ANYTHING! I called from the UPS Store but naturally got voice mail.
So here I sit three weeks later, having done 100% of the work myself with only pure incompetence on the part of Apple, and with a still-broken iPad Mini in my hands that has seen both coasts a lot recently.
Worse yet, it isn't like the iPad Mini WiFi is a RARE issue, it is EVERYWHERE, whether the initial disconnects, the stuff resolved by 6.0.2 or the failures like I am seeing.
Worse still, a friend of mine had a similar issue but was just dealing with it, and when I brought up the whole 2.4 vs 5GHz issue, he took it to the Apple store, told them, and walked out with a new one within 10 minutes.
Unfortunately I am 2 hours in either direction from an Apple store so that isn't an option based on my schedule and my family schedule.
So instead I get treated like a second-class citizen, and have direct requests and troubleshooting ignored by an incompetent staff that doesn't even do the most basic troubleshooting.
Any suggestions of how to get ACTUAL support from Apple outside of a store?

Just to close out ... the 'supervisor' was clueless as it turns out. Apple does NOT have a deal with UPS on handling the Mini, so the person who gave me the info was wrong. Did he call back? No ... he just let me go out and find out myself.
So I called again, and this time eventually ended up with a manager, who told me that the UPS Store thing wouldn't work, but that a box would arrive and then there would be a 'forced replacement'.
About 10 minutes later he called back and said he discovered that EVERYTHING the supervisor did was wrong ... he didn't actually properly flag for auto-replace, so I would have gone through an identical cycle again! So he had to restart the whole process, meaning I would get TWO 'coffins', but that I would then get an auto-replacement and would see that indicated in my support email.
I got the email, saw 'auto-replace'. Got the box on the 28th and immediately turned it around. Apple got the box on the 31st, and on the 1st I got emails that my Mini would arrive on the 2nd and it also had the new serial #.
Yesterday I grab the box from FedEx and go home to check it out. As expected, it IMMEDIATELY worked on my WiFi without issue ... and has worked perfectly since.
So ...
- it was NOT my home network.
- it WAS a hardware issue with the Mini
- Apple does NOT do proper testing on the Mini to detect what appears to be a fairly common issue.
- non-retail customers ARE treated as second-class by support.
This issue took FOUR WEEKS to resolve, involved FOUR shipments back & forth, and the ONLY reason it got resolved was that *I* did the troubleshooting that Apple either would not or could not do.
For someone who has been an Apple customer for more than 30 years, this has been a sobering experience ... I quite frankly expected much better from them.

CProjects 4.0 - CATS scenario: Details of confirmed hours in cProjects

Hi Experts,
Do you know how can I see the details of the confirmed hours in cProjects (I mean, depending on the cProjects task)? I would like to know for a certain amount of hours that appear as confirmed, who has posted them, when, and to which WBS element.
Thanks in advance.
Best regards,
Neil

Hi Neil,
It is very interesting question. The two tables mentioned by Vivek should be the right tables to get such information. But I still not 100 percent sure, if the link between two tables are the CATSDB~COUNTER <->
DPR_CONF_LI~CPR_CABA_BELNR.
The table CATSDB is in the ERP system, where you entry the hours via cats. And some inforamtion will be transfered to cProject system into DB table DPR_CONF_LI.
It may be sufficient to use the CATSDB solely.
Kind regards,
Zhenbo

How to post Actual costs

Dear all,
I have number of activities in that i have costs(activities) planned cost is 1lac. But actual am not able get in project planning board. Plz suggest me how to go further, If i miss actual confirmation somewhere.
Regards,
S.Suresh.

Hi Suresh,
I am posting this again as i typed wrong word for point no 4.
1.If you are using Internal Activity to plan Labor Hours then while confirming the Activity system will post actual cost(Controlling document) .The cost is Secondary cost.
2.For external services it will be after acceptance of service in ML81N.
3.For external services it will be after MIGO.
4.For General Cost activities you cant get costs after confirmation.For that you can post by FB50 or you can post a controlling document also by various CO tcodes(Manual cost allocation) i think tcode is KB15N .
Muzamil

How to use collective confirmation CO12

can any body explain me how to use collective confirmation CO12 with screen dump.
Plz help

Hi Viswa,
Prerequisites:
You can predefine values to identify confirmations and to determine default values in Conf. parameters for collective confirmation/fast entry (Customizing for Shop Floor Control by choosing Operations ® Confirmation ® Confirmation Parameters Collective Entry/Fast Entry):
    Identifying the confirmation
You can identify an individual confirmation either by the confirmation number or the order number/operation number.
    Suggest actual data
You can define whether and when (after entry, during saving) quantities (see Determining a Default for Yield) or activities are suggested. The default setting is that no quantities are suggested and activities are determined during saving. Personnel data and dates are always suggested.
Procedure:
    Choose Logistics ® Production ® Shop floor control ® Confirmation ® Enter ® For operation ® Collective entry.
    The screen for collective entry of confirmations appears.
    In this screen you can enter confirmations in a table (table control). You enter a new confirmation in each line. You can control the appearance of the table yourself.
You can change the type of confirmation identification during input. To do so choose Other view.
Enter all the data needed for the confirmations. Each line corresponds to a new confirmation. In this line you have all the fields that are available in single entry of a time ticket confirmation.
On the top line of the screen you can enter default values (for example unit of measure, personnel number) that are copied to all confirmations. Enter the values and choose This graphic is explained in the accompanying text. You can save these default values for a specific user, so that they are preset the next time the user logs on. You can also delete these defaults.
With this function, you can let the system suggest actual data (quantities, activities, dates, personnel data). To do so, select the confirmations, choose This graphic is explained in the accompanying text Propose actual data, set the indicator for the relevant actual data and choose This graphic is explained in the accompanying text. This data overwrites data that you may have already entered.
    Save your confirmations.
Note
To reach the Actual data screen for the selected confirmations choose This graphic is explained in the accompanying text. Here you have the complete functionality of time ticket confirmation. From this screen you can go to the detail screens and to the goods movement overview. If several confirmation have been selected, you can switch between the individual confirmations.
Note
You can switch to the goods movement overview from the collective entry screen (choose This graphic is explained in the accompanying text Goods movements). In this screen the goods movements for the selected confirmations are displayed.
You can check and, if necessary, change the goods movements. When you go back to the collective entry screen, the GM indicator is set for the selected confirmations (goods movements for confirmations already determined). As soon as you save a confirmation, the goods movements are also posted.
For more information choose the GOODS MOVEMENT OVER VIEW.
Regards,
Madhu.G
Edited by: madhu333mac on Jan 11, 2012 11:34 PM

How can I actually PLAY a game on my iPhone 6? When I GOTO the Game Center and click games, all I get is the screen with leaderboards, stats, etc

How can I actually PLAY a game on my iPhone 6? When I goto the Game Center and click on games, then click on a specific game (solitaire, for example), all I get is the leaderboards, achievements and player screen. All I want to do is launch the game.

Hi Jordanali!!!
Game Center is just simply used for what you are seeing, leaderboards and stats between your friends and yourself.
To launch an app, first download it from the app store, then just tap the icon on the home screen when it is done downloading!!!
I hope that answers all of your questions!

How to Find Actual Time Spent on a TASK in TFS 2013 by using the scrum template

Hi! Currently we are using the TFS 2013 version with Scrum template this template contains only Remaining work measure for Task item and there is no
other option for getting the Actual time spent on particular Task and Bug having the option called Effort. How to find the Actual Time spent or Actual effort hours on particular TASK is it possible? In the similar way the Agile Template having the These options
like
1 Original Estimate
2 Completed Work
3 Remaining Work
Can i use these 3 for Scrum Templete also?
We require the feature similarly like Atlasian JIRA product (JIRA consist the Actual time, Estimation Time and Log).

The Scrum template doesn't have these fields, tracking "spent time" is not really in line the philosophy of Scrum. it's tracking data that is not really useful anyway, unless you have to do some form of reporting. In which case you probably already
have a system to track time in at a higher level.
The way TFS tracks time is very hard to use when you have a highly collaborative team, it would require you to create tasks for each person contributing to a task or constant re-asssigning of tasks to track the correct time spent. How else would you track
two peopleworking together? Pair programming, for example is a practice we at scrum.org highly promote. As well as pairing a tester and a developer up on applying ATDD when working on a story together. When a story is taking "too long" to move off
the board a technique called swarming is often applied, in which all team members help out to move the story along at a higher pace or to get it unstuck. These ways of workign are very, very, very hard to capture in TFS. But we think the threshold to use these
techniques should be very low. People should default to these ways of working and not be punished by bad functioning tooling.
As mentioned by Alexandr, you can extend the Scrum template with the same fields the MSF templates use, but I would not recommend it. Instead, if you need to track time, first consider doing it in different tool and at a different level than task. Maybe
feature, activity or product backlog item.
If you still want to track time, then a tool like
Imaginet Time Sheet can extend TFS in ways that make it a lot easier to track time against any work item.
As a last resort, consider
adding the fields from the MSF template, but I beg you to reconsider.
My blog: blog.jessehouwing.nl

How to see data in the multi-provider ?

We have a multiprovider with the key figure as total stock, and its given as a non-cumulative kf which has a check mark next to it. Its getting data from the infocube to it, I mean there are 4 infocubes and 1 ods to the multi-provider. If I right click and see the infocube or the multi-provider and select the fields by rite click and I am unable to see the total stock kf. But if I click the actual multiprovider and click display instead of display data, I am able to see the keyfigures folder, if i expand that I see stock quantity folder and many other folders. If I expand stock quantity folder, there are 3 kf's ztotalstock, 0isstock and 0recstock. In those ztotalstok is non-cumulative checked. And I am unable to see the kf value when i rite click on the mp. So any suggestion to display the data by selecting a posting date in the mp. What my guess is , will there be any internal table/view to display the mp data. Please let me know any suggestions.
Thanks for your time,

Prasanth, entering the mp name in LISTCUBE is same as right click on the mp and click on display data, where it will give the selecting criteria for the fields. But here both will display the same fields, that is not my case. I am unable to see one of the key figure which is inside the mp, have you opened any mp. Please right click on it and choose display and then go to the key figures folder , if you open that you have lot of folders in it based on the category. IN my case its the stock kf folder and if you expand that there are three kf's out of the three, one is ztotal stock which is declared as non-cumulative kf, rite next to it, option is checked. So I think that is the reson we are not able to see ztotalstock kf , no matter in the listcube or display data option on the mp. Hope you got my situation. I know how to see the data in the multi-provider or infocube. But in this case its not displaying that ztotal stock keyfigure, but in the reporting we can see the data on the mp. My question is why am I not able to see the selection for that ztotal stock key figure , either in listcube or rite clik display data option. Did anybody face this situation.
Thank You,

How to see data in hierarchy

Experts,
I was searching on the forums, but could not find an appropriate thread on this. I want to see data
1. In PSA tables or equivalent for the hierachy data after succesful infopackage load. I can see the number of records in the monitor for infopack, but how to see the actual data for that run some where like 'ALE Inbox'.
2. When I click on 'display' of the hierarchy, I can see the infoobjects under the hierarchy, but how to see the actual data inside those infoobjects?
Please list the tcodes if possible.

Hi Latha,
Whenever you create a hierarchy and activate it, an internal ID called Hierarchy ID will be generated and this information is stored in the table RSHIEDIR. In SE12 go to this table and in place of HIENM give the name of your Hierarchy and IOBJNM as the name of the infoobject for which you created this hierarchy(0costelmnt in this case). With this you will get a HIEID.
Pass this HIEID to the Hierarchy (H) table of the costelement infoobject(/BI0/HCOSTELMNT) and here you will find all the 9 records that you loaded for your hierarchy. Hope this helps solve your issue.

CM01 - How to see actual confirmed hours?

Similar Messages

Maybe you are looking for