CM50 Extended Evaluation - to set the period

Hi dears,
I'm using CM50 to do extended evaluation of capacity. Currently it's coming out by Day, and I want the report by Month.
I know the Overall profile SAPSFCG020 can be set in SPRO in OPD0, but then where exactly do I need to change to switch the reporting to Month?? I tried changing the Time profile but it doesn't seem to have any effect...
Please help!!

Hi,
Before directly using it to release in /sapapo/mc90 or in background job, you can check it using the period split simulator which is at the top in /sapapo/sdp_extr. You can give date range, random value of forecast to be splitted and also the calendar to be used. Distribution function is what decides how value is split within the period(in your case it's week). So use this functionality.
Remember in background jobs you can't give dates, planning horizon is taken into account. The "No of periods" in the period split profile plays a crucial role in background job.
If more value is released(spikes i think in your terms) then forecast is more i think in 6th month.
Hope this helps.
Thanks and Regards,
Nithin.

Similar Messages

High number of "The connection has timed out" errors. Where do I set the time out period (variable and file name) - windows 7

I usually use a wireless network at home and have very few time out problems with Firefox.
I am travelling and using Optus Wireless broadband where the average ping to a site is 700+ms .
I suspect that this is the cause of the high number of timeouts I am experiencing.
Optus say there are no problems so I think I will have to set the timeout to a longer period.
Please advise what variable name/s (and in which file) the timeout is set for LOADING PAGES.
Thanks in anticipation.
Greg Atkinson.
By the way the same is happening in IE8
and on many sites other than the Yahoo one below.
================Full Error Page ==============
URL is http://au.mg4.mail.yahoo.com/dc/launch?.gx=1&.rand=81jkv757qfdqt
=========================================
The connection has timed out
The server at au.mg4.mail.yahoo.com is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Having the same problem 4 out of 5 times I try to navigate to a new site I get the error "connection has timed out".
My I phone works fine on the same wireless connection so it must be something to do with the computer. The problem occurs on IE, firefox, and google chrome.
I too would like to know how to how to either fix this problem or failing that to extend the length of time before the connection times out (which is currently only about 5 seconds).
Please help!
Thanks in advance

Mid quarter depreciation without setting the mid period

Hello All,
Thank you for taking time to read my question.
When AA went live, half monthly data for the company code was not maintained (while it should have been maintained 15 as the mid period). Since the half period is not configured, I am not able to set the mid month setting in OAVH. Now the taxes are calculated with an additional 15 days when specifying mid quarter when using period method control 005. The company code went live last year October and SAP will not allow updating the mid period from blank to 15.
Have anyone dealt with such a situation? I planned on defining a new period control key and assign it to a custom period method control. But still not able to get the depreciation value correct to the mid quarter.
Any help is greatly appreciated.
AM

What do you mean without mid period setting? Is this OAVH? Anyway, you can try this.
Use of Half Months in the Company Code
In this step, you determine the company codes in which you want to use half periods. In this way, you can calculate depreciation in these company codes on the basis of half months or half periods. Using this method, you can work with 24 periods in Asset Accounting, although the fiscal year version in Financial Accounting has only 12 normal periods (without using a different fiscal year version for Asset Accounting).
You should be aware, however, that the specifications for periods in the transactions in Asset Accounting (such as, useful life) have to be based on whole periods (12).
Example
Half periods are, for example, necessary to represent the "mid quarter/month rule". This is a version widely used in the U.S.A. With this rule, it is important for the determination of depreciation whether an acquisition takes place in the first or the second half of a period.
Caution
When you specify the use of half periods in the definition of an asset company code, half periods are automatically specified in all other company codes that use this fiscal year version.
You cannot use half periods with non-calendar fiscal months.
You cannot take back the use of half periods once the specification has been made. It is noted internally by the system in the asset master records.
Requirements
The number of the posting periods in the fiscal year version used must correspond to the number of calendar months (12).
Activities
1. Specify the use of half periods by entering the date (for example, the 15th) for the middle of the period for the company codes.
2. If you have defined period controls yourself
(see Period Control),
you must provide for the use of half periods in their assignment rules. For monthly and quarterly periods, corresponding period controls have already been created as standard in the system.
Thanks!
Jhero

How do you set the time period on IMAP email accounts (razr maxx)

Hi Guys -
Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
Your help is appreciated!
Best Wishes for the Holiday Season.
-Rich

Hey Rich. Once in 'settings,' there should be a "days to sync' under the 'data usage' section. You don't have that?

How do you extend the period of a trend line of a graph?

Hi, I am having trouble extending the trendline of a graph. Can someone please tell me how to extend the period of the trendline?
Thank you.

Hi wildgherkin - have a look at this very good, cheap app that does what you want and more. It is fully compatible with imovie. You can export the file directly into an iMovie project if you want.
http://www.rqs.ca/RollingCredits/

How to set the size of a class that extends JDialog

Hi,
I was trying to set the size of my dialog window to be 600 by 600, but couldn't change it. Here is my code:
public class alii extends JDialog {
/** Creates new form alii */
public alii(java.awt.Frame parent, boolean modal) {
super(parent, modal);
initComponents();
private void initComponents() {
Container contentPane = getContentPane();
addWindowListener(new java.awt.event.WindowAdapter() {
public void windowClosing(java.awt.event.WindowEvent evt) {
closeDialog(evt);
pack();
public static void main(String args[]) {
JFrame frame = new JFrame();
alii a = new alii(new javax.swing.JFrame(), true);
frame.setSize(600,500);
frame.setLocation(200,200);
frame.setVisible(true);}}
Please help me with this and explain to me what is the problem and what needs to be changed.
Cheers

Hi,
The code you sent me doesn't work, and the code I posted wasn't a complete, but there is the complete one. You can see now what the code does.
* alii.java
* Created on 15 November 2003, 13:31
* @author Ali
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.sql.*;
import java.util.*;
import java.io.*;
import java.applet.*;
import java.net.*;
public class sun extends JDialog {
int x[] = new int[4];
int y[] = new int[4];
int w[] = new int[4];
int h[] = new int[4];
int Y_ax = 310;
double DrawGraf[][] = new double[4][4];
String line[] = new String[9];
double Perc[] = new double[4];
double Sum=0;
GUICanvas can;
double graphvalue[] = new double [5];
/** Creates new form alii */
public sun(Frame parent, boolean modal) {
super(parent, modal);
initComponents();
//setVisible(true);
//setSize(600,500);
//setLocation(200,200);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
//Container contentPane = getContentPane();
addWindowListener(new java.awt.event.WindowAdapter() {
public void windowClosing(java.awt.event.WindowEvent evt) {
closeDialog(evt);
//contentPane.setSize(700,700);
//pack();
public void drawthegraph(String s)
/* try {
URL url = new URL(
"http://localhost:111/test/servlet/Compare?value="+s);
BufferedReader in = new BufferedReader(
new InputStreamReader(url.openStream()));
for (int c = 0; c<9; c++)
line[c] = in.readLine();
in.close();
}catch (Exception e){
e.printStackTrace();
graphvalue[0] = 200;
graphvalue[1] = 200;
graphvalue[2] = 100;
graphvalue[3] = 300;
graphvalue[4] = 20;
//graphvalue[4] = can.d2i(graphvalue[4]);
//System.out.println(line[8]);
Sum = graphvalue[0]+graphvalue[1]+graphvalue[2]+graphvalue[3];
Perc[0] = graphvalue[0]/Sum*200;
Perc[1] = graphvalue[1]/Sum*200;
Perc[2] = graphvalue[2]/Sum*200;
Perc[3] = graphvalue[3]/Sum*200;
System.out.println(Perc[0]);
DrawGraf[0][0] = 130;
DrawGraf[0][1] = Y_ax - Perc[0];
DrawGraf[0][2] = 60;
DrawGraf[0][3] = Perc[0];
DrawGraf[1][0] = DrawGraf[0][0]+60;
DrawGraf[1][1] = Y_ax - Perc[1];
DrawGraf[1][2] = 60;
DrawGraf[1][3] = Perc[1];
DrawGraf[2][0] = DrawGraf[1][0]+60;
DrawGraf[2][1] = Y_ax - Perc[2];
DrawGraf[2][2] = 60;
DrawGraf[2][3] = Perc[2];
DrawGraf[3][0] = DrawGraf[2][0]+60;
DrawGraf[3][1] = 310 - Perc[3];
DrawGraf[3][2] = 60;
DrawGraf[3][3] = Perc[3];
for(int d=0;d<4;d++)
x[d]=d2i(DrawGraf[d][0]);
y[d]=d2i(DrawGraf[d][1]);
w[d]=d2i(DrawGraf[d][2]);
h[d]=d2i(DrawGraf[d][3]);
repaint();
static int d2i(double d) {return (int) Math.round(d);}
public void paint (Graphics g)
g.setColor(Color.red);
for(int d=0;d<4;d++)
g.fill3DRect(x[d],y[d],w[d],h[d],true);
g.setColor(Color.blue);
g.drawLine(130,130,130,310);
g.drawLine(130,310,370,310);
g.setColor(Color.black);
g.drawString("WELCOME TO Ali",150,100);
g.drawString("Region: Lambeth",430,150);
g.drawString("Manger: ",430,170);
g.drawString("Location: ",430,190);
g.drawString("Number of Staff: "+graphvalue[4],430,210);
g.drawString("Week1",135,345);
g.drawString("Week2",195,345);
g.drawString("Week3",255,345);
g.drawString("Week4",315,345);
g.drawString(" "+"20 -",100,295);
g.drawString(" "+"40 -",100,255);
g.drawString(" "+"60 -",100,215);
g.drawString(" "+"80 -",100,175);
g.drawString("100 -",100,135);
g.setColor(Color.yellow);
g.drawLine(130,290,370,290);
g.drawLine(130,250,370,250);
g.drawLine(130,210,370,210);
g.drawLine(130,170,370,170);
g.drawLine(130,130,370,130);
/** Closes the dialog */
private void closeDialog(java.awt.event.WindowEvent evt) {
setVisible(false);
dispose();
* @param args the command line arguments
public static void main(String args[]) {
JFrame frame = new JFrame();
sun sn = new sun(frame, true);
frame.setSize(600,500);
frame.getContentPane().add(sn);
frame.setLocation(200,200);
frame.setVisible(true);
You were right that I am know to this, but getting there slowly and thanks for your help.
Cheers

Do you have any fonts with the Latin Extended Additional character set?

I would like to know what fonts in the Adobe catalog support the Latin Extended Additional character set and/or display all of the following diacritics & characters:
Macrons: ā ī ū
Dot below: ṭ ḍ ṇ ḷ ṃ
Dot above: ṅ
Tilde: ñ
Thanks,
MZ

All those characters seem to be included in the Adobe Latin 4 character set.
I believe that currently the only families that support the characters you're looking for are:
Source Sans Pro
Hypatia Sans Pro
Trajan Pro 3
Trajan Sans Pro
Adobe Text Pro

Setting the filter to restrict the data based on processing period

Hi all,
Hope someone might be able to help me - OBIEE 11.1.1.5 - I have an RPD very simple just two tables (nothing coomplex).
Here is the scenario - after every month end close the user will run the report from the dashboard by selecting the processing period like 20111130 (NOV close) processing period is a varchar(8) in the table, once the user selects the 20111130 i need to get the dataset for the last 12 months which is based on a different field called EMP HIRE DATE (this field includes the data values from 2005 onwards but i only need last 12 months) in this example l need to set the filter so that i only get the data from DEC 2010 - I was able to get this done using the SQL in TOAD against oracle 11 - but i am not sure how to set this as a filter in BI answers/dashboard
The below is my filter in TOAD but not sure how i can accomplish this in OBIEE - PROCESSING_PERIOD is VARCHAR(8) , EMP_HIRE_DT is DATE
EMP_HIRE_DT BETWEEN ADD_MONTHS(TO_DATE(SUBSTR(PROCESSING_PERIOD,1,6),'YYYYMM'),-11) AND LAST_DAY(TO_DATE(SUBSTR(PROCESSING_PERIOD,1,6),'YYYYMM'))
i really appreciate any help

Thanks.
I also found that what was happening is that the state was being correctly set, but the List was overriding the state with its built in selected and hovered state. The renderer would have a stepper, but as soon as the mouse moved over it it would change state. I even tried deleting all the states in the states array except "normal" and "stepper" , but it would still change out of "stepper".
Also, the buttons on the item renderer would also cause the item renderer to change states when their states changed.
So, for this case, to get it done I changed from a states model to a visibility model, and that works fine:
// if a recipe is a cocktail, switch state to display numeric stepper
if (XML(data).@course == "cocktails") {
     stepperGroup.visible = true;
     stepperGroup.includeInLayout = true;
     doubleItGroup.visible = false;
     doubleItGroup.includeInLayout = false;
} else {
     stepperGroup.visible = false;
     stepperGroup.includeInLayout = false;
     doubleItGroup.visible = true;
     doubleItGroup.includeInLayout = true;

How to set the fiscal year period as default in variables

Hi All,
How to set the fiscal year period as default it shoud take previous period when the report is executed.
And also I need to do the same changes in reporting agent.
Could you please any one help me.
Points will be given.
Thanks!
Best regards,
Ajay.

Hi Ajay,
Create a customer exit variable.Write the code in the include 'zxrsru01' using system date.
take the system date from the system date variable and using that you can get the current fiscal year period.use this value and using string commands, you can get period.
subtract 1 from this value.Using this you can get the previous fiscal period..
Please let us know, if you need the coding part
Hope it helps
Thanks,
Teja

Mail&Exchange, where can i set the sync period for mails?

Hello everybody!
Where can i set the sync period for my mails with an exchange account? At the moment, i can only see the mails since january, i need to see all of my mails since 2010...
Thanks!
Greets
Jan

first you make a bookmark for WINDOWS LIFE MAIL:
https://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks#w_how-do-i-create-a-bookmark
then you can make a shortcut of it(drag it) where you want it:
https://support.mozilla.com/en-US/kb/Sorting%20bookmarks#w_rearranging-manually
add bookmark to toolbar:
http://support.mozilla.com/en-US/kb/Bookmarks%20Toolbar#w_add-bookmarks-to-the-bookmarks-toolbar
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

How to set the spool retention period till 30 days(Printer Properties).

Hi SAP Experts
I need to setup a job which creates a spool. I want to set the spool retention period till 30 days(Printer Properties). But I have the option of keeping it only for 8 days or Do Not Delete at all. Can you please let me know how can I setup a job which creates a spool which wil be retained for 30 days and then will automatically get deleted?
Advanced Thanks
Thanks & Regards,
Kishore.

Hello Kishore,
I can understand why you dont want to change the variant.
However may be a slight change in the variant might help your cause though I am not sure whether you will like this suggestion or not.
Create a dummy output device type to which all spools created for this report need to be assigned.
Once this is done make a small change in the variant for the field Output device in such a manner that all the spools belonging to this printer/output device are not deleted.
Then create a new variant for this output device ensuring that only spools belonging to this output device and older than 29 or 30 days are deleted.
While this will ensure that normal spool requests are deleted these ones are not.
Really dont if this solution is acceptable or not.
Regards.
Ruchit.

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

Let me see if I can help you with the basic WDS configuration steps:
Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
802.11g AirPort Extreme Base Station (AEBS) Configuration
AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network
Manual Setup > WDS tab
WDS Mode: WDS main
Allow wireless clients (checked)
WDS Remotes: <enter the AppleID for the AXn here>
Click on Update and allow the base station to restart.
802.11n AirPort Express Base Station (AXn) Configuration
AirPort Utility > Select the AXn > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
Manual Setup > WDS tab
WDS Mode: WDS remote
Allow wireless clients (checked)
WDS Main: <enter the AppleID for the AEBS here>
Click on Update and allow the base station to restart.

Set the "Schedule compliance evaluation" schedule in the default client agent settings (compliance settings) using powershell?

I am having trouble figuring this out. using the Set-CMClientSettings is it possible to modify the "Compliance Settings" "Schedule compliance evaluation" schedule. The default is every 7 days and I want to be able to modify
that.
Thanks
Eric

I just checked and I don't see a way to do this even with the R2 CU1 cmdlets. I would recommend filing a feedback on Connect regarding this here:
https://connect.microsoft.com/ConfigurationManagervnext
Check out my Configuration Manager blog at http://aka.ms/ameltzer

My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim if the period of inactivity is less than 7 mins. Please help. MBP 13" OSX 10.6.8 (2011)

My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim even if the period of inactivity is less than 7 mins. Please help. MBP 13" OSX 10.6.8 (2011)

Doesn't sound like it. It sounds like you're being logged-off.
Does your Mac go through the complete Restart cycle -- black screen, gray and/or blue screen momentarily, startup chime, etc?
If you're not sure, do a Restart just to watch the process; the next time the problem occurs, see if it's the same.
You need to know which it is, as these will have very different causes, and different places to look for a solution.

Automatic Posting of All Open GR/IR A/c at the period end

Dear Experts,
We have a requirement for IT Act Provision.
1. All Open Credit Purchase documents(for which MIRO has not been done) to be automatically transferred to a A/c called Current Liability & Provision(Clearing Account) on the last date of the period(Month end)
On the first day of next period all such open credit purchase documents line items to be created in GR/IR Account against which users can do MIRO when invoice is received.
2. All open Debit GR/IR line items to transferred to Advance A/c (Clearing A/c) on the last date of the month and again to reversed line item wise to GR/IR account.
What is the settings to be done please advise.
Regards,
Alok

Dear Mr Obviar,
Thanks for you reply,
In that OBYP setting:- there are three columns:-Recon A/c -
Adjustment A/c -
Traget A/c
Please correct me if I am wrong:-
I want GR/IR credit to be transferred to some Clearing A/c
then I shall put GR/IR GL code under Recon A/c
and Clearing A/c GL code under Traget A/c
What shall I put under Adjustment A/c
Please extend your help.
Regards,
Alok

CM50 Extended Evaluation - to set the period

Similar Messages

Maybe you are looking for