Cmd + z

Drücke ich cmd+z um den letzten Schritt rückgängig zu machen, erhalte ich ein anderes Layout. DER LETZTE SCHRITT KANN NICHT RÜCKGÄNGIG GEMACHT WERDEN.
iMac 27", Bridge CS6. Fehler besteht von Anfang an (seit etwa 1,5 Jahren).
Aktuell Software update: Problem noch immer, Löschen der Prefs hat auch nichts gebracht.

Hi,
Thanks for the fast reply. below you see three screenshots (one file) what happens when I press cmd+z only the Layout switches.
I never get a "undo"
I use Bridge for editing my photos (IPTC). By a test i did now, I recognized, when i make a "Rotate Picture 90°" i can undo this. But whenever i work with the IPTC fields (Date, Adress, Caption, Camera, place and so on) I can not "undo" what I wrote.
Another thing: Its a hassle that the Font size changes when a field is made active. If you want to change or correct one word, after a click in the field the word is on another place. See scrteenshot 2.
Best regards
Oliver
I use a iMac 27", middle 2011
Prozessor 3,1 GHz Intel Core i5
Speicher 8 GB 1333 MHz DDR3
Grafikkarte AMD Radeon HD 6970M 1024 MB
Seriennummer C02GG3D8DHJQ
Software Mac OS X Lion 10.7.5 (11G63b)
Bridge CS 6 last update last week. 5.0.2.4

Similar Messages

Safari doesn't open website fully unless CMD R (force refresh)

Hello Everyone,
Headteacher isn't happy that for some reason Safari will not open images at the top of this website unless I hit CMD R. Doesn't work with the normal refresh/reload button. It works fine in Chrome and Firefox.
Site is http://www.lowerpark.cheshire.sch.uk (Using Safari 7.0.1).
I obviously can't tell all the kids here's a new website but you have to press CMD R if you are using an iMac or MacBook Pro. Normal refresh doesn't work and I can't check if Safari on a PC works as I don't have one.
Clearing out cache files etc have no effect even using a 'through cleansing' software such as Washing Machine.
Any advice much appreciated before the headteacher changes to another company to update the school website.
Thanks,
Mike

There's a couple of extra headers you can try using:
http://www.webmasterworld.com/forum21/9880.htm

Error while executing a scenario from CMD

I am trying to execute a scenario from CMD using the starctscen command.
when I use the below command
E:\OraHome_ODI\oracledi\bin\startscen EXT_DATA 002 GLOBAL
it is executing correctly
but I tried to create a sceduler for the execution where i used the below command
C:\Documents and Settings\Desktop>"E:\OraHome_ODI\oracledi\bin\startscen.bat" EXT_DATA 002 GLOBAL
and it is giving me the following error
The system cannot find the path specified.
OracleDI: Starting scenario EXT_DATA 002 in context GLOBAL ...
'oracle.odi.Agent' is not recognized as an internal or external command,
operable program or batch file.
can someone help me on this.
Thanks,
Sri

In the batch File write this way
cd E:\OraHome_ODI\oracledi\bin
E:
startscen EXT_DATA 002 GLOBAL In case you are providing the values (EXT_DATA 002 GLOBAL) as parameter
then call the startscen this way
cd E:\OraHome_ODI\oracledi\bin
E:
startscen %1 %2 %3

An error The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered after launching a ps1 script from cmd file.

I'm trying to load sharepoint script from *.cmd file.
I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
My cmd file is:
Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
My sharepoint file 1.ps1 is:
$snapin="Microsoft.SharePoint.PowerShell"
if ($action -eq $null -or $action -eq '')
{<br />
# Action by default is complete uninstallation.
$action='uninstall'
$uninstall = $true
else
$action = $action.ToLower()
switch($action)
{ $_ -eq "uninstall" } { $uninstall = $true; break }
{ $_ -eq "removesolution" } { $removeSolution = $true; break }
{ $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
{ $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
Check the Sharepoint snapin availability.
if (Get-PSSnapin $snapin -ea "silentlycontinue")
Write-Host "PS snapin $snapin is loaded."
elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
Write-Host "PS snapin $snapin is registered."
Add-PSSnapin $snapin
Write-Host "PS snapin $snapin is loaded."
else
Write-Host -f Red "Error: PS snapin $snapin is not found."
Exit -1
$url = "http://pc1/sites/GroupWork/"
$site= new-Object Microsoft.SharePoint.SPSite($url )
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
$site.Dispose()
The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
PS C:\2> .\1.ps1
PS snapin Microsoft.SharePoint.PowerShell is loaded.
GLOBAL#0 Global template
STS#0 Team Site
STS#1 Blank Site
STS#2 Document Workspace
MPS#0 Basic Meeting Workspace
MPS#1 Blank Meeting Workspace
MPS#2 Decision Meeting Workspace
MPS#3 Social Meeting Workspace
MPS#4 Multipage Meeting Workspace
CENTRALADMIN#0 Central Admin Site
WIKI#0 Wiki Site
BLOG#0 Blog
SGS#0 Group Work Site
TENANTADMIN#0 Tenant Admin Site
{248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
{95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
{7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
PS C:\2>
I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
the cmd file but without success.
My PowerShell has version 2.0:
PS C:\2> $psversiontable
Name Value
CLRVersion 2.0.50727.5477
BuildVersion 6.1.7601.17514
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
After launching the script from 1.cmd file i get an errors:
C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
PS snapin Microsoft.SharePoint.PowerShell is registered.
The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
tered.
Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
ration.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
No xml configuration files loaded.
Unable to register core product cmdlets.
Could not read the Types files in the folder CONFIG\PowerShell\types.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
"No Types files Found."
Could not read the Format file in the folder CONFIG\PowerShell\format.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
No Format files Found.
PS snapin Microsoft.SharePoint.PowerShell is loaded.
New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
on at http://Pc1/sites/GroupWork/ could not be found. Verify t
hat you have typed the URL correctly. If the URL should be serving existing con
tent, the system administrator may need to add a new request URL mapping to the
intended application."
At C:\2\1.ps1:48 char:18
+ $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
+ CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
tionException
+ FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
Shell.Commands.NewObjectCommand
Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.

I have an answer for my problem: for solving a problem I've made several steps:
1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
This user has been added as farm administrator in the wizard.
This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
the Management Shell of Sharepoint.
3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
(my main account) in the Config database
4. Run CMD file only from Start->Run menu.
runas /user:Domain1\UserAccount1 "C:\1.cmd".
Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
Thanks all for help.

Powershell Script Send-zip not working when running in cmd

I found there is powershell send-zip script available in technet. I tested it and found that it works when the script is running under powershell env, but when it is calling in cmd env, I can see the zip file, but there is nothing in it. If
I add the "-noexit" switch it runs normally. Anyone have ideas what might be happening?
The orig codes is as following:
function global:SEND-ZIP ($zipfilename, $filename) {
# The $zipHeader variable contains all the data that needs to sit on the top of the
# Binary file for a standard .ZIP file
$zipHeader=[char]80 + [char]75 + [char]5 + [char]6 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0
# Check to see if the Zip file exists, if not create a blank one
If ( (TEST-PATH $zipfilename) -eq $FALSE ) { Add-Content $zipfilename -value $zipHeader }
# Create an instance to Windows Explorer's Shell comObject
$ExplorerShell=NEW-OBJECT -comobject 'Shell.Application'
# Send whatever file / Folder is specified in $filename to the Zipped folder $zipfilename
$SendToZip=$ExplorerShell.Namespace($zipfilename.tostring()).CopyHere($filename.ToString())
SEND-ZIP C:\abc\a.ZIP C:\a\a.bak

I've had the same problem with similar code found on another web site.
The reason the zip file ends up being empty is that the temporary $ExplorerShell object you created is deleted when the send-zip function returns,
and any incomplete copy operation that may still be ongoing at that time is aborted. (The copy operation is asynchronous, and continues after the CopyHere() function returns.)
To work around this, you need to add a delay loop before you return, waiting for the copied object to appear in the zip.
(Note that adding a fixed delay, like I've seen on other web sites, does not work: Small files appear almost immediately, whereas large file or worse still large subdirectory trees can take a long time to appear.)
Try changing the end of your routine to something like...
# Create an instance to Windows Explorer's Shell comObject
$ExplorerShell=NEW-OBJECT -comobject 'Shell.Application'
# Open the zip file object
$zipFile = $ExplorerShell.Namespace($zipfilename.tostring())
# Count how many objects were in the zip file initially
$count = $zipFile.Items().Count
# Send whatever file / Folder is specified in $filename to the Zipped folder $zipfilename
$SendToZip=$zipFile.CopyHere($filename.ToString())
# Wait until the file / folder appears in the zip file
$count += 1 # We expect one more object to be there eventually
while ($zipFile.Items().Count -lt $count) {
Write-Debug "$filename not in the zip file yet. Sleeping 100ms"
Start-Sleep -milliseconds 100
# Return deletes the $zipFile object, and aborts incomplete copy operations.

Please I can not get a .jar file to run on XP SP3 start/run/cmd/

I can not get a .jar file to run on XP SP3 start/run/cmd/
Please help if can figure this out. I'm convinced it is a Windows XP SP3 problem from searching on google and seeing other ppl on XP SP3 with same problem (but no working solution for myself). I'll try to be complete-listing all I've done.
I had installed: Java SE Runtime Environment v6u14 for Windows Multi-language
I had checked here it was working properly: http://www.java.com/en/download/manual.jsp
I'm trying to run this jar file (soht-client-0.6.2.jar):
http://prdownloads.sourceforge.net/telnetoverhttp/soht-java-client-0.6.2.zip?download
http://www.ericdaugherty.com/dev/soht/javaclient.html < this is the information for the program.
(yes the file can be executed and should open the program's window
I wanted to post screenshot of it but friend that it's working for isn't here)
_(Please find log of all cmds I did in this post here: http://pastebin.com/f792983df )_
_I have extracted +'all' the files to: C:\062\+_ (I have tried using other directories, same problem)
++I then start/open/run/cmd+
then I: cd C:\062\+
then I try various commands - all+ of these do absolutely nothing- meaning no errors, no reply, no window opens, nothing except enters that directoy again:
java -jar soht-client-0.6.2.jar
java -jar -client soht-client-0.6.2.jar
java -client -jar soht-client-0.6.2.jar
java -jar soht-client-0.6.2.jar soht.properties
soht-client-0.6.2.jar
So I try this cmd: java soht-client-0.6.2.jar
Reply:
C:\062>java soht-client-0.6.2.jar
Exception in thread "main" java.lang.NoClassDefFoundError: soht-client-0/6/2/jar
Caused by: java.lang.ClassNotFoundException: soht-client-0.6.2.jar
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Could not find the main class: soht-client-0.6.2.jar. Program will exit.
I try this cmd:
java -jar soht-client-0.6.2.jar -client
Reply:
C:\062>java -jar soht-client-0.6.2.jar -client
Unable to load configuration file: -client - java.io.FileNotFoundException: -cli
ent (The system cannot find the file specified)
SOHT Java Client
The SOHT Java Client requires a properties file. Either start
the application in the same directory as the soht.properties
file, or specify the file name on the command line:
java -jar soht-cleint-<version>.jar c:\soht.properties
So then I do these cmds which produce the exact same error/reply just above; Unable to load..:
j_ava -jar soht-client-0.6.2.jar -client soht.properties_
java -jar soht-client-0.6.2.jar -client C:\062\soht.properties
So then I copy soht.properties to C root and do:
java -jar soht-client-0.6.2.jar -client C:\soht.properties <same error as above
Then from other information I have read I right click on the .jar file, select open with Always open with:
_"C:\Program Files\Java\jre6\bin\javaw.exe"_
Try again.. same problem.
Then I do cmd:
_"C:\Program Files\Java\jre6\bin\javaw.exe" -jar "C:\062\soht-client-0.6.2.jar"_
does nothing, retry the other commands same thing (either nothing or those same replies)
Then I read (http://forums.sun.com/thread.jspa?threadID=5384879) someone had the same problem as I and they solved it by uninstalling all Java/reboot/ then install JDK 6 Update 14 with NetBeans 6.5.1 start NetBeans and then it worked for them.
So I unistalled all Java, rebooted and gave the cmd another try (before re-installing), now a new error, of course:
C:\062>java -jar soht-client-0.6.2.jar
'java' is not recognized as an internal or external command, operable program or batch file.
Then I install Java SE and NetBeans Cobundle (JDK 6u14 and NB 6.5.1) Final Release/ reboot/ open Netbeans/
go to test java page; all is good, run cmds again -and still nothing..
C:\062>java -version
java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode, sharing)
I reassociate program with: C:\Program Files\Java\jre1.6.007\bin\javaw.exe_
same thing.. nothing
Thank you very much for your time :D_
PS. My computer has been newly reformatted so needing another reformat I'm sure is not the solution.

Thank you very much for your replies Taggert_77 & swmtgoet_x :D
Taggert77_: I have never used NetBeans. I only installed it in the bundle as I had read on another post that somehow installing the bundle magically helped another user with the same problem (he didn't know why it worked after that either).
Before XP SP3 I was able to execute .jar file through cmd prompt. Now I am not.
This file is executable, grab it and you will see. Here is a screen shot (program in front is FlashFXP, behind is the cmd prompt and what should happen):http://www.freeimagehosting.net/uploads/53273b4ddf.jpg
swmtgoetx_: I only did the other cmd's to try to make it spit out something, anything lol :D
The proper cmd is simply: java -jar soht-client-0.6.2.jar
I did give your cmd a try, and it produced nothing :( (just like the other correct cmds)
java -client -jar soht-client-0.6.2.jar soht.properties
Thank you again...the mystery remains
PS. If you do a search for this you'll find an amazing amount of XP SP3 users with the same problem and no solution posted that I could find except one chap that did the unistall install order that I did above).

CMD.EXE: The application was unable to start correctly (0xc0000142). Click OK to close the application.

Hi. I am running Windows 8.1.
I recent have been having trouble running cmd.exe. I am getting this pop up message everytime I run the program, whether as a regular user or as Admin. The message that pops up is:
The application was unable to start correctly (0xc0000142). Click OK to close the application.
Can you please help?
I ran event viewer and this is the report of the error:
Log Name: System Source: Application Popup Date: 12/22/2013 3:56:10 PM Event ID: 26 Task Category: None Level: Information Keywords: User: SYSTEM Computer: Jason-Vaio Description: Application popup: cmd.exe - Application Error : The application was unable to start correctly (0xc0000142). Click OK to close the application. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Popup" Guid="{47BFA2B7-BD54-4FAC-B70B-29021084CA8F}" /> <EventID>26</EventID> <Version>0</Version> <Level>4</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2013-12-22T19:56:10.126735000Z" /> <EventRecordID>493149</EventRecordID> <Correlation /> <Execution ProcessID="760" ThreadID="312" /> <Channel>System</Channel> <Computer>Jason-Vaio</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="Caption">cmd.exe - Application Error</Data> <Data Name="Message">The application was unable to start correctly (0xc0000142). Click OK to close the application. </Data> </EventData> </Event>

Hello,
See this blog-post;
http://blogs.technet.com/b/gladiatormsft/archive/2013/06/11/app-v-5-0-on-these-0xc0000142-errors-and-where-they-are-coming-from.aspx
Nicke Källén | The Knack| Twitter:
@Znackattack

How do i connect to sql server 2012 from cmd .

Hi ,
I Installed sql server 2008 R2 and 2012 Express and sql server2014 . I can conect to sql server 2008 R2 using
SQLCMD -L command .
How do i connect to sql server 2012 express edition from cmd .
Any Hep appreciated
Thanks in advance,
Shravan

I HAVE ANOTHER INSTANCE NAMED TEST WHEN I USE THE COMMAND IT GIVES ME THIS ERROR
HOW TO RECTIFY
C:\Users\HP>SQLCMD -S HP-HP/TEST
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Named Pipes Provider: C
ould not open a connection to SQL Server [67]. .
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Login timeout expired.
Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : A network-related or in
stance-specific error has occurred while establishing a connection to SQL Server
. Server is not found or not accessible. Check if instance name is correct and i
f SQL Server is configured to allow remote connections. For more information see
SQL Server Books Online..
PLZ HELP

How to pass CMD in FM RRW3_GET_QUERY_VIEW_DATA?

I want my query results to be fully expanded using RRW3_GET_QUERY_VIEW_DATA function module. I saw while using RSRT transaction that in a query output, all levels can be expanded by going to Right Click on BEx report->Enhanced Menu->Expand Hierarchy-> Level <n>. I see that when I do that the bookmark text adds things like ENHANCED_MENU=X&
CMD=DRILL_TO_LEVEL&LEVEL=4&IOBJNM=0PLANT. I want to get data from my queries expanded till last level in an ABAP program.
I tried passing below values to I_T_PARAMETER of function module but still it is returning only the first level of data in hierarchy.
CMD - DRILL_TO_LEVEL
LEVEL - 4
IOBJNM - 0PLANT
Please help me out!

Seems there are some options, see this thread:
RRW3_GET_QUERY_VIEW_DATA - Hierarchy Variable

CMD=Ping&log query is taking long time-taken when checked in IIS logs.... Exchange 2010 SP3..

Query regarding the ActiveSync and parameter time-taken from ActiveSync IIS logs.
Here what I see for from the logs.
[email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200 0 0 1501129
443 [email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200
0 0 22105
443 [email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200
0 0 452
443 [email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200
0 0 936
443 [email protected] 45.101.90.185 Apple-iPad2C3/1202.410 200
0 0 656238
In the above log, highlighted are the time-taken and I just want to check what is the ideal time-taken value, some value above should be causing some problem, like the one of the top 1501129 ?
?AND I see its for POST event and CMD=Ping&log query.......
We have Mobile Iron in the environment and we are seeing few timeout errors on MobileIron server and for users intermittently. They usually see below error... However we don't see any end users issues, but just want to get rid of below error. MobileIron guys
are pointing it to time-taken value which is high intermittently.
IOException connection to server [email protected] -- java.io.IOException:
awaitUninterruptibly was stopped by timeout
@BALA

Hi,
To understand more about the issue, I’d like to confirm the following information:
1. What’s your Exchange 2010 version?
http://support.microsoft.com/kb/2536517/en-us
2. Do you install other software, like SQL, on the same Exchange Server?
3. Change another admin account to access EMS.
Thanks,
Angela Shi
TechNet Community Support

I want to show console output in my cmd prompt in C# winform application

Hi,
I'm launching the some process in C# .net Winform appliaction. But i couldn't able to see console output on the screen. The process is getting launched but inside cmd prompt window, it is showing nothing. I would like to show something on cmd prompt. Please
help on this.
using (Process comxdcProcess = new System.Diagnostics.Process())
comxdcProcess.StartInfo.FileName = fileName;
comxdcProcess.StartInfo.Arguments = args;
comxdcProcess.StartInfo.RedirectStandardError = true;
comxdcProcess.StartInfo.RedirectStandardOutput = true;
comxdcProcess.StartInfo.UseShellExecute = false;
comxdcProcess.Start();
this.errorComment = comxdcProcess.StandardError.ReadToEnd();
StreamReader myStreamReader = comxdcProcess.StandardOutput;
//// Read the standard output of the spawned process.
this.errorComment = myStreamReader.ReadToEnd();
comxdcProcess.WaitForExit();
click "Proposed As Answer by" if this post solves your problem or "Vote As Helpful" if a post has been useful to you Happy Programming! Hari

@Hariprasadbrk
Do you mean you have use process class to start "cmd prompt" And want to display some output in it?
If so, there is no need to use RedirectStandardOutput property. This property means the output of an application is written to the
Process.StandardOutput stream.
// Setup the process with the ProcessStartInfo class.
ProcessStartInfo start = new ProcessStartInfo();
start.FileName = @"C:\7za.exe"; // Specify exe name not cmd exe.
start.UseShellExecute = false;
start.RedirectStandardOutput = true;
// Start the process.
using (Process process = Process.Start(start))
// Read in all the text from the process with the StreamReader.
using (StreamReader reader = process.StandardOutput)
string result = reader.ReadToEnd();
Console.Write(result);
Output
This section shows the output of the process.
7-Zip (A) 4.60 beta Copyright (c) 1999-2008 Igor Pavlov 2008-08-19
Usage: 7za <command> [<switches>...] <archive_name> [<file_names>...]
[<@listfiles...>]
So you can start a cmd exe.
Please also take a look at the article from codeproject
How to redirect Standard Input/Output of an application
In summary, the shutdown proces is invoked from my application, and it displays the output from the process in RichTextBox control.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I lose the connection when closing the CMD

Hi guys,
I have configured a standalone listener as following:
C:\Program Files (x86)\Java\jre6\bin> java -Dapex.home=D:\list -Dapex.images=C:\images -jar D:\apex.war
Afterward,
If I close the CMD, I will lose the connection, and I have to reconfigure it again.
If I open APEX locally , I mean by using the shortcut "Get Started With Oracle Database 11g Express Edition" , Then I will lose the connection that uses the default port of the listener, that is 8080.
After I configured the listener I got this message on the CMD
-- listing properties --
PropertyCheckInterval=60
ValidateConnection=true
MinLimit=1
MaxLimit=10
InitialLimit=3
AbandonedConnectionTimeout=900
MaxStatementsLimit=10
InactivityTimeout=1800
MaxConnectionReuseCount=1000
APEX Listener version : 1.1.2.131.15.23
APEX Listener server info: Grizzly/1.9.18-o
May 21, 2011 5:14:41 PM com.sun.grizzly.Controller logVersion
INFO: Starting Grizzly Framework 1.9.18-o - Sat May 21 17:14:41 GST 2011
INFO: http://localhost:8080/apex started.
Using JDBC driver: Oracle JDBC driver version: 11.2.0.2.0
Regards,

Hi,
I'm not sure I got your question right, but I'll try to find some solution anyway.
If I close the CMD, I will lose the connection, and I have to reconfigure it again.That's what happens when a shell is terminated - all associated processes will stop as well. However, if you have a apex-config.xml in your apex.home you shouldn't need to configure your APEX Listener each time your start it, but it would reuse an existing configuration.
If I open APEX locally , I mean by using the shortcut "Get Started With Oracle Database 11g Express Edition" , Then I will lose the connection that uses the default port of the listener, that is 8080.Now, if you have XE running on the same (local) machine as you have your APEX Listener running in standalone mode, you probably have a port conflict: By default, both APEX Listener in standalone mode and the Embedded PL/SQL Gateway (EPG) use port 8080. The EPG is activated as web server for APEX in XE after a fresh installation, the APEX Listener would be an alternative in that case. You can either stop the EPG, or reconfigure any of the two web servers to use a different port, if you want to run them parallel.
To change the port used by the APEX Listener in standalone mode, you simply add another parameter to the startup: -Dapex.port=8888 and you're done.
To change the port used by the EPG, connect as sys and run the following
EXEC DBMS_XDB.SETHTTPPORT(8888);
COMMIT;If you want to disable the EPG, simply set the port to *0* .
After I configured the listener I got this message on the CMDThat's what it should look like.
No, since your topic is "lose the connection when closing the CMD", I assume you search for an alternative. You could run the APEX Listener as a Windows service, even in standalone mode. To do this, you create a batch file, e.g.
%JAVA_HOME%\java -Dapex.home=D:\oracle\APEX_Listener\_home -Dapex.images=D:\oracle\apex_4_0_2\images -Dapex.port=8888 -jar D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\apex.war >>D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\my_apex_listener.log 2>&1Note that you have to set JAVA_HOME as system property or replace the call with the absolute path to your JDK or make sure the JDK is in your PATH variable.
Of course, you can and should change the other directories as well to fit to your system.
Next, create a Windows service, e.g. using [url https://iain.cx/src/nssm/]NSSM (free) or [url http://support.microsoft.com/kb/137890]SRVANY (MS, non-free), that starts your batch as a windows service.
The command for creating that service using NSSM could look as follows
nssm install APEX_Listener D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\startup.cmdYou can edit the service properties afterwards, e.g. change the start mode from "Automatic" to "On Demand".
I hope this answers your question. If not, please point me into the right direction.
Thanks,
Udo

I can't connect to Facebook, it doesn't even register the site, and I can't even ping it in CMD?

I can't connect to Facebook. I could this morning, but suddenly I can't anymore. It tries to load, and then says "The connection has timed out".
I also can't connect with Internet Explorer. However, I can connect with Firefox, or IE from other computer (Other computer also has other internet provider).
I can connect to any other site on the web, like I am now on Mozzila support.
When I go to run, CMD, and type "ping www.facebook.com" it also says "Request timed out", and 4 packets lost. When I ping it, I get "star.c10r.facebook.com [31.13.64.65]". When I search for that IP i get "Facebook Ireland Ltd".
When I do same ping on my other computer (and other internet provider) he pings "star.c10r.facebook.com [179.60.192.3]" and pings correctly. From that other computer I also can't ping first IP (31.13...), but from first computer (on which I can't go to Facebook site) I can ping second ping (179...) correctly, but I need to type it in manually. When I just type "ping www.facebook.com" it gives me that first IP that doesn't work (31...).
Why does it happen, and why do I get different IP's when I type "ping www.facebook.com"?
Any idea how to fix it?

Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
Contact your ISP and have them check your service.

System exec cmd window

Hello, first time posting a question!
I have spent a good while trying to find an already posted answer to this, and looking on the wider web, hope i have not just missed it.
I am using XP Pro SP3, LV 8.6.
I am not very familiar with Windows command lines and structures etc.
I am using the System Exec VI to start a third party piece of software. I have wired the path in to the path input, and if i wire cmd /c start xxx to the command line terminal the VI will run and start the software application (xxx.exe). As the VI executes the cmd window clunks open and closed. If i run the VI without the cmd /c part of the command then an Error 2 is returned (as widely reported by others).
Is it possible to open an application without the cmd window opening and closing?
Using the System Exec VI it is possible to open NotePad just by wiring 'NotePad' to the comand line terminal. Is it possible to place the third party software somewhere, or register it with the OS somehow so it could be started in the same way as NotePad (i.e. without the cmd window flashing up)?
Thanks...
Blue
Message Edited by BlueTwo on 09-25-2008 09:22 AM

Hi Thoric, thanks for the suggestions, Success!
I tried the True boolean to the Run Minimized, but it did not help.
Changing the Environment Path string to include the path to the directory containing the application did work (once i had worked out the syntax).
On to the next problem....
Cheers,
Blue

How to change Switch between open documents keyboard shortcut (default Control + Tab or Cmd + ~)

I use Control + Tab and Control + Shift + Tab or Cmd + ~ and Cmd + Shift + ~ to switch between tab back and forth alot how do I change the shortcut to something else?
On Photoshop CC 2014 mac

No, there isn't. you can't even set your own shor cut keys as you don't know what the documents will be named. Normally you can add short cuts keys but only for those menus options that already exist but your documents will change. I have searched for the answer earlier as I also want it.
There is in the Pages Help menu an option for Keyboard shorcuts but nothing is mentioned ther about changing document windows.

Not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion Financial reporting 11.1.2 version.

I am not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion 11.1.2 Financial reporting .
When I enter the value , it just vanishes. Am I missing something here.?
I need to set export path for PDF generation in Hyperion financial report for batches.

Edit FRConfig.cmd and update
set EPM_ORACLE_INSTANCE=%MIDDLEWARE_HOME%\user_projects\epmsystem1
update epmsystem1 to the correct epm instance name
Cheers
John
http://john-goodwin.blogspot.com/

Cmd + z

Similar Messages

Maybe you are looking for