CMS dependency problem

Post Author: mplunkett
CA Forum: Deployment
I installed XI R2 on a Windows 2003 server, specifying an Oracle
database as the database for the CMS. This database resides on a
separate Unix server. Everything was fine initially, but eventually I
started getting the following error message:The system WORKSTATION can be contacted, but there is no Central Management Server running at port 6400. WORKSTATION is obviously not the real name. It is a Windows XP desktop that was being used by development to test using the same database schema as I was given for the Windows 2003 server installation. I want to remove this dependency, so that all that matters is my Windows 2003 server and the Unix server. How is this possible, or do I have to rerun the installation?Thanks,Matthew

John,
Wish I could help you but I had the same problem. Not sure why.
Erik

Similar Messages

Is this how pacman is supposed to work? (dependency "problem")[SOLVED]

Hi
Just did a fresh install of archlinux after buying a new computer.
Installed some drivers.. kde (and some other stuff)
Then.. just for the fun of it I removed qt3 with pacman -Rd.
I was expecting that pacman -Syu would see that a dependency was missing and try to reinstall qt3.
So I did a pacman -Syu, and what happened? Nothing.. pacman says all is okay, well all is not okay cus kde will not work without qt3.
Is this how it should work or is this a bug? I checked the manpages for some kind of "install all missing dependencies" but found nothing..
/Ivan
Last edited by Fuel (2008-01-23 01:34:22)

fwojciec wrote:
That's not how Arch is supposed to work. Arch is about giving power to the users. With power comes responsibility, and this responsibility falls on the users in this case. Remember -- this is a "do it yourself" kind of distribution and so if what I want to do is to screw up my system I should be able to do it in an easy, efficient and elegant way. This is consistent with the mission statement of the Arch Linux project, this is how Arch works and this is why many of us love it.
On a personal note, if Arch/pacman tried to hold my hand more, like you suggest it should, I'd be switching to another distro very, very quickly.
It's not really about trying to get arch/pacman to hold your hand for you. It's more about giving the possibility to recover from a serious mistake. If you can tell me something wrong with adding an option wich checks for missing dependencies on your system and how that particular feature intervenes with "the arch way" - then please do.
I'm not saying arch is bad, arch is actually the best linux distro I've used so far - but there is something common with almost all distros - you get dependency problems after a while, one way or another.
Thats why I think there should be a way to resolve such issues.

LSADMIN CMS authorization problem - How To Transport XI Content Using CMS

We are configuring CMS using the "How To Transport XI Content Using CMS". For the LSADMIN user we have added the SAP_XI_CMS_SERV_USER and SAP_SLD_ORGANIZER roles. We have followed all of the steps in the guide.
The problem we are encountering is that when we define the domain but put in the LSADMIN as the user, we get an error - "SLD (URL http://server:50000) server exception: HTTP response code: 403 Forbidden"
We then gave the LSADMIN all of the roles of XISUPER and restarted the J2EE engine. We still have the same problem. So we changed the CMS User to be XISUPER and we could save the domain. Now, we have another problem - when we try to export from dev using CMS, we get the following problem:
"Sent on 3/9/06 at 1:26 PM: Unable to establish connection to CMS server http://servername:50000. Unable to transfer the following transport lists: Export list for ...
Details: unknown exception: com.sap.cms.util.exception.conf.CMSCFinderException: Workspace name does not exist: com.sap.cms.util.exception.conf.CMSCFinderException: Workspace name does not exist: version=0,dtrWSName=
Check the availability of the CMS and the user authorizations and send the transport request again if necessary
We are on SP16. Anyone encountered this issue?
Regards,
Jay

Here are all of roles we have given LSADMIN in client 100:
SAP_CMS_ADMINISTRATOR
SAP_SLD_DEVELOPER
SAP_SLD_GUEST
SAP_SLD_ORGANIZER
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_CMS_SERV_USER
SAP_XI_CMS_SERV_USER
SAP_XI_DEMOAPP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
But on the J2EE side, we only see the following roles for LSADMIN:
- Authenticated Users Built-in Group Authenticated Users
- Everyone Built-in Group Everyone
- SAP_XI_CMS_SERV_USER Exchange Infrastructure: Change Management Service User
I checked client 000, and noticed that LSADMIN only had the SAP_XI_CMS_SERV_USER. So this the problem. I added all of the roles to LSADMIN in client 000 and restarted J2EE and now i can see all of the roles under the LSADMIN user in UME.
We noticed the problem that our UME configuration was pointing to client 000 and not client 100. If we go to Visual administrator and go to the Services->UME Provider, we see that - ume.r3.connection.master.client points to client 000. We will need to change this.
That was the issue. UME was pointing to the wrong ABAP client. I appreciate all of your help.
Regards,
Jay

CMS setup problem

I installed CMS per the instructions.
In step 4 of creating E-site I get the following after clicking submit (_Menu_for_Site ):
Exception:
java.lang.NullPointerException
     at cms.TopicModule.createDefaultACL(Compiled Code)
     at ifs.files._ifs._webui._jsps._SiteAddition._jspService(_SiteAddition.java:131)
     at oracle.jsp.runtime.HttpJsp.service(Compiled Code)
     at oracle.jsp.app.JspApplication.dispatchRequest(Compiled Code)
     at oracle.jsp.JspServlet.doDispatch(Compiled Code)
     at oracle.jsp.JspServlet.internalService(Compiled Code)
     at oracle.ifs.protocols.dav.impl.IfsDavServlet.processJsp(Compiled Code)
     at oracle.ifs.protocols.dav.impl.IfsDavServlet.doGet(Compiled Code)
     at oracle.ifs.protocols.dav.impl.IfsDavServlet.doPost(Compiled Code)
     at oracle.ifs.protocols.dav.DavServlet.processRequest(Compiled Code)
     at oracle.ifs.protocols.dav.DavServlet.service(Compiled Code)
     at oracle.ifs.protocols.dav.impl.IfsDavServlet.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at org.apache.jserv.JServConnection.processRequest(Compiled Code)
     at org.apache.jserv.JServConnection.run(Compiled Code)
     at java.lang.Thread.run(Compiled Code)
Even with the error, It appears to create the E-site directory in the jsps directory, subfolders are CMSTemplates and Images.
I do not see a Menu_for_Upload item...
Thanks for any help
John Hayles

John,
Wish I could help you but I had the same problem. Not sure why.
Erik

CMS Configuration Problem

Hi Folks,
While configuring NWDI - CMS, under Transport Studio, we need to put SAP-JEE.sca, SAP_BUILDT.sca and SAP_JTECHS.sca files under \usr\sap\JTrans\CMS\inbox. so that these files can be seen in Checked-In tab.
Usually these files can be found under \usr\sap\<SID>\SYS\global\CMS_CBS\plugins but in my j2ee these files are not available.
I downloaded these files from marketplace which are retrieved in .zip format. on Extraction i did'nt get any .sca file. i renamed these file to .sca and put in CMS Inbox but all in vain.
Please help.
Mandeep Virk

Hi Anil,
Thanks for reply,
These mentioned components are available in SLD and for my SC i created Build Time dependency on these components.
After creating Domain and Track Under Landscape Configurator, i need to Check-In these .sca files to from CHECK-IN tab and Import Checks to Development tab.
I am not getting .sca files in Check - In tab of Transport studio.
Mandeep Virk

CSS render dependency problems

We are using portal on a marketing site that has specific rendering requirements which are satisfied by extensive use of CSS. One such requirement is that themes can be used control the leading colour of the page i.e. changes the colour of heading text in page content and the logo in the header. The hope was to use the cascading nature of CSS to override styles so that the lowest level CSS definitions are applied to the page. The problem is that CSSs are being included on pages when they are not required:
Consider a site with a top level of books each of which has a set of pages beneath, each book is required to have a different leading colour. In Portal a set of themes have been defined which consist of skin definitions containing a link render dependency that point to the CSS with the appropriate colour definitions for that theme. When the theme is applied to a book all of the pages are rendered with that theme. However, when one page within the book requires a different colour this is not achievable, as adding a different theme to one specific page in the book results in it being rendered in all of the pages in that book. When the HTML source is examined it shows that for all pages in the book, both CSSs are declared in the head, in the order in which the pages occur in the book.
It seems that the render dependencies are being evaluated inside the book and added to all pages, but our expected behaviour is that only the render dependency associated with the active page will be rendered. Is there any way to control this behaviour?
We are using Portal 10.0 MP1, the CSS files we are using are being served by apache so the render dependency definitions are absolute. As an aside whenever the page is rendered a number of error messages appear in the weblogic log indicating that 'The look and feel resource at base path ... could not be found', this occurs for all of the CSS and script files used on the page even though they appear correctly in the head. I do not know if this is at all related to the issue but we would also like to make sure these errors stop appearing in our logs.

Hello,
Set the UL margin so the browsers don't use their defaults.
IE is less than FF's default.
ul#navlist {margin: 10px;}
Adjust as needed.
Then just get rid of the margin-top:20; in the LI style.
The menu text does overflow in my FF, as I probably have my
text size set larger than yours.
Such is the nature of AP Divs (aka Layers).
More info at the link below. Scroll down to the section
entitled "The trouble with Layers: Overflowing Text" to see
screenshots and the fix.
http://apptools.com/examples/pagelayout101.php
Take care,
Tim

Task dependency problem?

Hi,
I have an AD already provisioned to user. and on exchange Resource object , for depends on tab I have selected AD. Meaning saying that if user have not requested AD earlier it would raise request for both AD and Exchange.
But the problem is, I have a user who AD is already provisioned. Now when I request for exchange , its also raising request for AD along side exchange which should not happen. Since, AD is already provisioned and account exists in the target system. Can any one Highlight on whats wrong with my approach.
Thanks,
sat

Hi,
What I could see that its not doing anything in AD , its simply provisioning Exchange.
I have selected "AD" as the dependent resource object for Exchange. Also unchecked "Allow Multiple" for AD.
Have created a user and assigned AD resource.Now when I request for exchange , its also raising request for AD along with exchange and triggering approval process for both AD and Exchange resource. But AD approval process is not affecting anything on Exchange provisioning.
is this the default behaviour ? If so , is there any way I can avoid this? kindly assist.
Thanks & Regards
Inbaa

Cannot Update Circular Dependency problem

Hi everyone,
I wanted to update a few packages but ran into dependency cycle problem.I did pacman -Syu and then tried to update but all in vain.I searched the forum and found some solutions but I am still unable to solve the problem.This is the error message that I get:
extra is up to date
community is up to date
:: The following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n] y
resolving dependencies...
warning: dependency cycle detected:
warning: udev will be installed before its util-linux dependency
looking for inter-conflicts...
:: gnupg and gnupg2 are in conflict. Remove gnupg2? [y/N] y
:: kmod and module-init-tools are in conflict. Remove module-init-tools? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: gcc: requires gcc-libs=4.6.2-5
I am not sure about the real approach to this problem.I cannot update pacman neither can I delete all the packages to resolve dependencies.
Any help will be appreciated Thanks.
Last edited by stp002 (2012-04-06 10:03:48)

This is really handled in quite alot of threads on the forums already. Simply running:
# pacman -S pacman
should fix it for you.
Additional info about the kmod/module-init-tools warning.

Stock Price Add-in - msnsq.exe dependability problem

I've used msnsq.exe as an Excel add-in to obtain stock prices for years but it recently become "unstable." Sometimes it works and sometimes it doesn't. I've tried the "USA" & "NSYE" changes
that have been suggested but that is only a
very temporary fix. I've read a lot of "press" about the problem but haven't found a solution. How do you make it work dependably in Excel 2010 and/or 2013? Is another Add-in more appropriate now?
If so, how can I access it?

Works OK with XP and Office 2010.
Also with Win 7 and Office 2007.
Win 7 and Office 2010 DON'T work together.
As for 2013 or Windows 8 I would not hold your breath! Microsoft don't care about customers' needs, only selling new systems, like so many companies that only sell you what they want to sell, not what you want to buy!
I will never buy Microsoft again!

[SOLVED]Installing steam in optimus and lib32-libgl dependency problem

Hello everyone!
I have a problem concerning the installation of steam under arch_64 on a laptop with Optimus. I have succesfully installed Bumblebee with Nvidia 319.17-2, everything works fine. I have also installed lib32-nvidia-utils which is version 319.17-1. Now I try to install steam:
[root@VOSTRO onur]# pacman -S steam
resolving dependencies...
:: There are 3 providers available for lib32-libgl:
:: Repository multilib
1) lib32-mesa-libgl 2) lib32-nvidia-304xx-utils 3) lib32-nvidia-libgl
Enter a number (default=1):
The problem arises at this point:
1) I am using nvidia, so I can't use mesa.
2) I have installed driver 319.17 with the corresponding util package, so not this one.
3) I guess this is the answer. But since I am using bumblebee, I checked the wiki page (https://wiki.archlinux.org/index.php/Bumblebee) and under section 2.1 there is a note:
Note: Do not install lib32-nvidia-libgl! Bumblebee will find the correct lib32 nvidia libs without it.
This leaves me confused. What am I supposed to do at this point? Is it a problem on Bumblebee's part? Or since lib-32-nvidia-304xx-utils is legacy now, shouldn't the dependency be updated to include the latest nvidia-utils package 319.17-1? Or am I missing something?
Any kind of insight will be deeply appreciated.
NOTE: Just before submitting this post, I learned that there was Optimus support in the beta release of this driver, but in the release notes of the released version contains nothing about Optimus
http://www.nvidia.com/object/linux-disp … river.html
so I guess installing Bumblebee was not a mistake?
Last edited by Pipix (2013-05-17 22:43:22)

I have pretty much the same problem.
I went for lib32-mesa-libgl and uninstalled lib32-nvidia-libgl. Problem was that Steam did not find libgl.so so i had to install lib32-intel-dri too.
Now steam works but i cannot use the nvidia GPU..... if i set launch options to "primusrun %command%" then dota2 does not launch.
optirun glxgears works.
primusrun glxgears works.
Even all CUDA examples work.
what could be the problem?
Last edited by labotsirc (2013-08-26 20:25:32)

CMS track problem (NWDI)

Hello!
Please help
I need to modify Web User Interface (component SAP-CRMWEB)
I make track with "Modify a Software Component" wizard (NWDI), than I add this track to NWDS.
And here are the questions:
1. I do not have "Development Configuration Perspective" in NWDS, but I have "Development Infrastructure Perspective" instead. Is it ok? Guide tells to do a few steps, including u201CInactive DCu2019su201D Panel, and I do not have one!
2. No components in the imported track in NWDS. Nothing to modify!
3. In CMS new track is marked as waiting for assembly and component SAP-CRMWEB as "developed". Why?

Hi Alexander,
did you do what is desciben on help.sap.com for [track specific authorizations|http://help.sap.com/saphelp_nw70/helpdata/EN/04/551b42d10b5633e10000000a155106/frameset.htm]?
Could you please check whether your developers have the right to execute the actions CMS.Export* (Own or Foreign) as desibed in [here|http://help.sap.com/saphelp_nw70/helpdata/EN/94/6c7b401c976d1de10000000a1550b0/frameset.htm]?
Kind regards
Karin

Dependency problem with unixODBC-devel-2.2.11-7.1.i386

Hello, guys:
I got problem when I try to install 11gR1 on my FC15. I have installed unixODBC-devel-2.2.11-1.i386.rpm successfully. But when I tried to install unixODBC-devel-2.2.11-7.1.i386.rpm. An error says:
error: Failed dependencies:
unixODBC = 2.2.11-7.1 is needed by unixODBC-devel-2.2.11-7.1.i386
How can I resolve this problem?
Thank you in advance.
Geng

sorry. I mean, I installed unixODBC package at first.
The problem is resolved. It was version conflict. I installed unixODBC-2.2.11-1.i386.rpm first, but actually I should install unixODBC-2.2.11-7.1.i386.rpm!
Thank you all the same. :-)
Geng

DTR dependency problem

My problem is as follows:
1)I have created a java DC which contains several classes.
2)In that DCs public part, I have created an assembly (by choosing Can be packaged into other) which exposes all of the classes.
3)I have created a second DC which is a WebDynpro DC.
4)In the WebDynpro DC I have declared the 1st DC as a used DC.
5)I have built and deployed the Webdynpro DC this part works fine. However, when we run the webdynpro I get an error that states that the classes from the JAVA DC are not known to the Webdynpro.
I think that the problem might be that the .jar files are not packaged into the webdynpro .ear file as a result of a bug in the ANT script that is generated in order to package this .ear file.
I have created a second scenario which uses a J2EE Enterprise Application instead of the WebDynpro. This project too results in an .ear file but this time the .ear DOES include the classes from the JAVA DC.
Furthermore, I have looked at the build.xml files of both the projects (the webdynpro DC and the Enterprise Application DC). While the Enterprise Applications build.xml contains the line:
<copy todir="C:\Documents and Settings\I029211\.dtc\POCCAF\t\644CC03E11A2633C5526B12EC82461DB/jars">
                    <mapper type="flatten"/>
                    <fileset dir="C:\Documents and Settings\I029211\.dtc\POCCAF\DCs\sap.com\xapps\poc\common\_comp\gen\default\public\CommonDataObjects\">
                           <include name="lib/java/."/>
                    </fileset>
Which is responsible for bundling .jars into the .ear file, the WebDynpros script contains no such line (or anything similar).
That leads us to the conclusion that the problem might be in the generation of the ANT script of the WebDynpro project.

Did u try adding the referenced DC project name(in the format of <provider name>/<application name>) in the sharing references of the second webdynpro DC? I suppose this should solve the problem.
Regards
Shakeel

CMS exports problem - urgent

Hi,
Issue: CMS transport option is not displaying in the context menu drop down list for the Integration Repository (IR) Export CMS transport for the all SWCVs.
My question is:
1. Do we really need the CMS track to display CMS TRANSPORT in the context menu?
2. As per How to...Use XI with CMS.pdf ; document the context menu should display the
CMS TRANSPORT irrespective of track creation (Section 3.3.1; PAGE:7 once
the following parameters (Integration Rrepositor) are set to true value:
com.sap.aii.ibrep.core.cms.enableClTransport
com.sap.aii.ibrep.core.cms.enableManualSpDefinition
com.sap.aii.ibrep.core.cms.enableTransportWizard
But this is not reflecting in my IR - CMS TRANSPORT context menu for all SWCVs why?. It is displaying only for the SWCV's which are having CMS track data.
thanks
Sreedhar Urupatturu

Hi,
How to Transport XI Content Using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Go through all those links..
Thanks,
Satya Kumar,
Reward points if it is useful..

Pacman -Suy gives mod_perl dependency problem

:: Starting full system upgrade...
resolving dependencies...
warning: cannot resolve "perl=5.12.1", a dependency of "mod_perl"
:: the following package(s) cannot be upgraded due to unresolvable dependencies:
mod_perl
Do you want to skip the above package(s) for this upgrade? [y/N] y
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: mod_perl: requires perl=5.12.1

File a bug report.

CMS dependency problem

Similar Messages

Maybe you are looking for