CMS that integrates with both Dreamweaver and SQL server
We are in the process of trying to choose a CMS for our organization.
The Problem: Our house is divided
Our development side of the house uses PCs, IIS, .Net and SQL for the backend.
Our design team uses MACs, Apache, and Dreamweaver for our development tool. We are in need of a CMS that could integrate the two sides of the house using SQL as the backend.
Our ApDev team is pushing for using Sharepoint as our CMS which would mean that we would have to move away from Dreamweaver. As designers we do not want to do that. HELP.
Dreamweaver CAN plug into the sharepoints sql database, as I said it is simply a matter of connecting it in the site definition (I have done this and also used DW to design the site).
It may be worth pointing out to your development team that if there are more than 2 of them in the team, then using sharepoint would not require them.
For you to use .net in CS4 there is a undocumented (and unsupported) extension available in the configurations folder of DW CS4 (look under disabled features). it may also be worth pointing out that the new version of sharepoint is not even supported by MS expression web.
Sharepoint is also overkill if you are just developing an Internet site and not a corporate extranet site as well, that is password secured. If it is just a server that both teams require for collaboration during development then use a svn server (DW Apple/Apache and windows/IIS can then use it).
Do a search for svn server using your prefered search engine.
PZ
Similar Messages
-
Is there a way to get a creative cloud license that works with both Mac and PC platforms?
Is there a way to get a creative cloud license that works with both Mac and PC platforms?
Hi there
A Creative Cloud membership gives you access to both the Mac & Win versions of the desktop applications.
Please check the FAQ for more information: Creative Cloud Help | Creative Cloud / Common Questions
Kind regards
Bev -
SMS_SRS_REPORTING_POINT - Error retrieving folders with SCCM 2012 and SQL Server 2008 R2 SP2
Hi:
According to all the Reporting Services logs my Reporting Point was setup correctly. When I try and run any report I see the entries below in the srsrp.log on the SQL Server. The report names show up in the Console but when I right any of the
listed reports I get errors and no report runs.
I am running SQL Server 2008 R2 SP2 on a remote server. SQL is installed on its own server. There is no firewall between the Configuration Manager server and SQL Server.
Thanks.
Mark
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)]. SMS_SRS_REPORTING_POINT
1/25/2013 9:15:07 AM 4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
SRSRP registry key change notification triggered.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)]. SMS_SRS_REPORTING_POINT
1/25/2013 9:17:40 AM 4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)Hi:
Windows Firewall is off on both systems.
I can ping the Configuration Manager server from the SQL Server by netbios name, ip address and fully qualified domain name. I can ping the SQL Server from the Configuration Manager server by netbios name, ip address and fully qualified domain
name.
I have uninstalled and installed the Reporting Point Service a couple of times and everything looks fine according to the logs after the install finishes but these errors only appear each time I try and Run a report.
Mark -
Help with Flex - PHP - and SQL Server
Good afternoon,
I have been working on this problem for over a week and am at
my wit's end. I am trying to create an application that will allow
me and my fellow statisticians to share code easily. The
technologies at my disposal are Flex, PHP and SQL Server 2005. The
web server is IIS. I have downloaded and installed the PHP driver
for SQL Server 2005 and am able to query the database and generate
XML. The problem I'm having is that I can't return the XML from PHP
to Flex.
If I execute the php code in a web browser and view the
source, it looks like XML. I can then cut and paste the exact same
code into an xml file and read it in from the harddisk and the tree
will populate. Can anyone please help me? I don't have flex builder
so I it's hard for me to use trace and view what is going on.
Thanks in advance,
Eric GravesThanks for the suggestion. I have tried every permutation of
e4x path notation I can think of. You're right, you're not supposed
to need the root level as that's supposed to be returned in the
result. So you should only need to reference first level after the
root. When I do this and launch the .SWF I get a completely empty
tree.
I think the problem lies somewhere in my understanding of
what format Flex needs returned from a HTTPRequest. It's my
understanding that it just needs to be XML. As far as I can tell,
that's what I'm sending it. On the PHP side, does it have to be
cast a special way? Everything I've seen just shows people using
ECHO to output the XML data. -
C# application to execute both oracle and sql server script files.
Hi All,
I am suppose to develop an application using c# which can execute oracle script files as well as sql server script files based on some user's choice.
Both the script files(oracle/sql server) contains scripts to create tables, create views and create functions.
What is the best way to do this and which existing c# functions should is use.
Thanks in advance.I am suppose to develop an application using c# which can execute oracle script files as well as sql server script files based on some user's choice.
You can use SQL Plus for Oracle. You can have a C# program that issues commands for scripts for table, views, triggers creation and the whole 10 yards to SQL Plus,
http://docs.oracle.com/cd/B19306_01/server.102/b14357/qstart.htm
https://www.google.com/#q=sql+plus
I started writing a program to use SQL Plus to run the scripts, but cI ame to the conclusion that it was a waste of my time.
A tool called OSM, an Oracle, tool gives a list of script files that need to be run do to a change in a script file based on file timestamp. You can copy the list doing a copy/past operation and drop it into SQL Plus's Command line, and SQL Plus runs the
scripts.
For MS SQL Server, you have this, which you can run from a C# program too.
http://www.webfactory-world.de/wfknowledgebase/wfknowledgebase_wf3.3/Content/AdditionalWindowsSettings/Tutorials/UpdatingSQLDBFromCommandLine.htm
I would consider using the above from a C# program a waste of time too.
I look at it this way. If the user doesn't have database admin experience and know how to use DB admin tools, then they have no business doing anything with a database - period.
BTW, the Invoke statement in VB or C# will run SQL Plus or SQL Server command line tool. -
Creating OLAP report with Crystal Reports and SQL Server Analysis Services 2005
Post Author: orahc_mao
CA Forum: Data Connectivity and SQL
Hi!
I am currently using the trial version of the Crystal Reports XI and I wanted to do an OLAP report. The problem is I cannot select a cube using "OLAP Connection Browser" (the popup window). I already selected Microsoft OLE DB Provider and entered the server name but still can't connect.
I don't think the problem is with SQL Server Analysis Services (2005) since Microsoft Excel - Import Data can detect the server as well as the cube I have created.
I also tried the "Database Expert" of Crystal Reports, created an OLE DB (ADO) connection with "OLE DB Provider for OLAP Services 8.0" driver, entered the server name, checked the integrated security and then I can readily select the database created at SQL Server Analysis Services. However, I still need the OLAP grid create the report but it goes back to my original problem... selecting a cube.
I hope somebody would help me with this issue.
Thanks a lot!
orahc_maoHello,
I don't recognize those variables as CR ones so it's likely something the original developer is setting in code.
You'll have to discuss with that person.
If your have SDK issues then post your question to one of the .NET or Java SDK forums.
Thank you
Don -
How to Build a Flex App that works with both SQLite and MySQL?
Let me explain a bit: I am developing an app that will
be published as an AIR application using SQLite, as well as a FLEX application that will use MyDSQL via web services.
I want to develop both applications in such a way that all the components can be reused, and I only have to do minimal redevelopment. I have started witht the AIR application. Once I have it completed, I want to publish the application (with minimal redevelopment) as a FLEX web app.
My thinking is that I contain the database accesses in the Application, and passing the data via interfaces to the respective modules, as well as receiving data from the modules back to the Application to be written to the database. This was the only changes between the FLEX and the AIR application will be how the database access is handled in the Application file, and I can leave all modules as is and will be able to maximize reusability,
I haven't done this before, and was wondering what the best approach for this is?
Thanks!It seems very difficult to find best practices on how to structure your database layer in FLEX. None of the books I have go into detail about it, nor do any of the websites I have found so far, including the Adobe Flex tutorials. Sure, they explain how to interact with databases, but don't seem to care about best practices for structuring your application.
Can anyone point me in the right direction for this?
Thanks! -
Developing database views between Oracle and SQL Server tables
I am on Oracle 10.2, my organization has many SQL Server databases as well and has now made
SQL server as company standard so many new databases will be developed in SQL Server. It is of course
not possible to convert all Oracle databases to SQL Server, so a mix environment will exist. Two questions:
1. Is it possible to develop database views in Oracle (10g in my case) which join Oracle tables with tables in SQL Server 2008? If yes, how. I have seen some heterogeneous connectivity setup to connect SQL Server to Oracle, but not sure whether it is possible to develop a database view across two databases.
2. I know it is not a SQL Server forum, but many DBA’s know both Oracle and SQL Server. Is it possible to develop views in SQL Server (SQL Server 2008 R2 in my case) which join Oracle 10g and SQL Server 2008 tables? I know in SQL Server, there is way to set up linked servers, but do not know whether it is possible to develop views.
Thanks a lot for your insight.You can create views that join local Oracle tables and remote SQL Server tables. I'm pretty sure you can do the reverse as well but I haven't personally done it.
However, I would be very concerned about the performance you'd get if you created that sort of view. You'd very frequently end up in a situation where Oracle has to pull all the data in the remote table across the database link in order to apply predicates and join the data locally. That could be disastrous from a performance standpoint.
Justin -
Sorting differences between Oracle and SQL Server
Hello All,
This question is related to both Oracle and SQL Server
I have a requirement where I want to compare 2 tables line by line. One table is in Oracle and other table is in SQL Server
And suppose that both of the tables don't have a primary key. Now when I sort the records using order by clause for a column then -
Rows having null values in that column of Oracle are placed at the bottom.
Where as Rows having null values in the same column of SQL Server are placed right at the top.
How can I make either of them to behave like other.
My sole aim is to have same order of occurrence of rows in both Oracle and SQL Server tables so that I can compare them line by line.For example :
select * from emp order by comm;
So all null value in comm column are at the end.
Now if you wish to get them on the top of select output then :
SELECT EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,NVL(COMM,0) COMM,DEPTNO FROM EMP ORDER BY COMM;
Means i am using NVL (oracle function) function. If comm column is having null value it will converted to zero value at the time of exectuion of select query.
So, now comm column is having zero value in select output and SQL Server is having nulls at the top. I do'nt know who to make nulls to zero in SQL Server. So issue solved.
HTH
Girish Sharma -
Which version of crystal reports can link to Windev 14 and SQL server 2008 applications
I am developing an application with windev 14 and sql server 2008, i would like to know which version of crystal report can i use?
Hi GS,
Move to .NET SDK forum.
I don't know how CR for Visual Studio will integrate into WinDev but to get the installer for VS 2010/2012/2013 go to this page:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
It's the runtime for CR 2011 or 2013 now.
As for SQL 2008 you need to install the Client tools and when creating reports use the SQLNCLI10.dll as the client DB driver for ODBC or OLE DB.
Don -
Matching data types b/w oracle and sql server
anyone here knows if there is a list of data types supported by both oracle and sql server (regardless of releases & versions?
an immediate response would be highly appreciated.
thanks.Hi,
The following post might be of assistance to you:
http://msdn.microsoft.com/en-us/library/ms151817.aspx
If this is what you're looking for, then mark the question as answered and closed.
Regards,
Naveed. -
I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack
Hi,
I could resolve the issue since there were lot of issues after system copy.
1. During distribued to Cenrtal system - system copy.
You need to combine both DB and CI export copies in one folder during which one thing can happen.
SOURCE.PROPERTIES - this file will be there in DB export JAVA folder and also CI export JAVA folder where
DB SOURCE.PROPERTIES file doesn't have an entry of "src.ci.host". This will stop the SAPINST with error and after modifying the file "SOURCE.PROPERTIES" Traget System Copy finishes without any issue.
Then after this stage I encountered an issue with bind hosts entry in config tool which was due to virtual host name usage in my HACMP setup due to whcih JAVA gives a startup problem.
I eliminated this issue also.
After JAVA started I faced an issue with XI related navigations.
ecchangeProfile url still had an entry of Production System. This may be a bug.
After changing that entry, exchangeProfile was downloaded but it had all the source system host entries which were manually changed.
Now I can access all the XI related navigations.
I need to also perfrom SGEN and Profiles import.
Do I need to change any additional settings after this so that my production and DR can work without any issue?
Do you have any additional checks which I can perfrom to ensure my DR systems consistency before I start the log shipping from Production?
Regards,
Rajkumar -
Cisco ISE with both internal and External RADIUS Server
Hi
I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
I will like to know if it is possible to configure it and how I can do it ?
Thanks in advance for your help
Regards
BlaiseCisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same. -
Hi,
I have a problem with DW. I´d like to develop a site
using PHP and SQL Server. Anyone knows if is there a extension to
do this kind connection inside DW?
I´ve tried to use the string that DW generates to
connect with MySql and change it to connect with SQL Server,
however it doesn´t work.
I´ve already found a extension that do this, but it
doesn´t work with DW CS3.
Anyone can help me?
Thank you,
Luciano Fernandes
PS: I have a original DW CS3"lucianopopo" <[email protected]> wrote in
message
news:ff7k9h$euc$[email protected]..
> Hi,
>
> I have a problem with DW. I?d like to develop a site
using PHP and SQL
> Server.
> Anyone knows if is there a extension to do this kind
connection inside DW?
>
> I?ve tried to use the string that DW generates to
connect with MySql and
> change it to connect with SQL Server, however it doesn?t
work.
> I?ve already found a extension that do this, but it
doesn?t work with DW
> CS3.
>
> Anyone can help me?
>
> Thank you,
> Luciano Fernandes
>
>
> PS: I have a original DW CS3
There used to be the PHAkt servermodel supporting multiple
databases in PHP
with Dreamweaver,
unfortunately Adobe dropped the product after acquiring the
company that
produced it before the release of CS3, so
it's not compatible with Dreamweaver CS3.
Previous versions are available at
http://openphakt.sourceforge.net,
you can
help development of a CS3 compatible version by posting bug
reports for the
error messages you encounter.
Joris van Lier -
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar.
Maybe you are looking for
-
My computor wont let me update my Itunes
For some reason my computer won't recognize my Ipod Touch and it won't let me update I tunes it gets about half way and then it gives me a message that errors have occured and if it persists to go to tools>download only and install it manually...
-
G5 Starts Up Fine But Doesn't Start Monitor Consistently! I'm stumped!
Hello all. I just purchased a new Mac Pro. My G5 has been problematic for a number of months now even under Leopard. I replaced the internal battery, have done PMU and zapped PRAM and nothing solved my problem. The problem has been: It takes me at le
-
Encore CS5 slideshow transitions not rendering reliably to DVD
I'm trying to create a relatively simple slideshow DVD in Encore CS5 on Mac (10.6). The slideshow is about 35 images long, and most of the transitions are cross-dissolves. However, there are exceptions: a couple of the transitions have no effect (i
-
Hi all, I'm new here, and I have a stupid problem, I think. If someone could help me, I'll be grateful. I have to build a very simple JSP application using a few database tables, providing the base functionality: insert, update, delete, search. I'm u
-
Phap_admin: how to add columns to the initial ALV
Hello everyone, I have a requirement which is to add 2 new columns on the ALV that appears after going through the phap_admin selection screen. I show you a picture as an example: I need to add 2 fields form infotype 0002 in this ALV list. I've been