CMS two software components with different version

Hi,
We are going to develop and maintain pararell two software components versions (e.g. SOFTWARE_SAMPLE 1.0 and SOFTWARE_SAMPLE 1.1) and we have got problem during transports (we are not able to create second track in CMS). Is it possible to have two separete tracks for two SWCV? Because I've noticed that we can only create track for one SWC. It looks like that track depends on SWC not SWCV. Am I right or not?
regards,
wojtek

Hi,
Plz remember what doc says:
Oracle Document wrote:
All nodes within the topology must be configured to use the same multicast address and port.
The multicast address must be within the valid address range, which is 224.0.1.0 to 239.255.255.255.
Ideally, multicast address and port assignments should be managed by your systems administration staff to avoid potential conflicts with other applications.
So you can use any from the above range and unique to all nodes in the cluster.
For more info on links, visit this page:
Regds,
http://www.ibiztrack.com/
Edited by: user8848593 on Nov 12, 2009 2:20 PM

Similar Messages

Bible software with different version

Hi all, thanks for all good work you are doing here.
Please I want to ask: is it possible to have a parrallel bible application in my phone? I mean a bible with different versions as one application in my phone?

Steve,
Each web application has its own session within a J2EE container. You cannot share sessions, unless you deploy both apps as one web application which is probably not what you want. So, yes, the only work around I can think of is abandoning container-managed security so you can navigate to the other web app with some request params that cause an "auto-login" to happen.
Steven Davelaar,
JHeadstart Team.

Adobe media encoder components have different versions error CS5 (32 bit)

I updated the CS5 suite the other day and all the updates installed fine, except adobe media encoder which said "done with errors" (no indication of what the errors were mind you).
Now, when I open Adobe Media Encoder (CS5) it pops up saying "Adobe Media Encoder components have different versions. Please update Adobe Media Encoder."
This is the 32 bit v of CS5 (so no Premiere or AE) but Adobe Media Encoder is still used to encode flv etc for the web (Flash and Dreamweaver).
The CS4 suite version of Adobe Media Encoder (that does have Premiere and AE) works the same as always. Has anyone else noticed this?

This was a problem with the installer.
We have updated and posted a new version to Adobe.com.
If you still get error on launch, you can download the new patch and install it to fix this issue:
1.       Go to http://www.adobe.com/support/downloads/detail.jsp?ftpID=4869
2.       Download the patch and save it on your Hard drive.
3.       Unzip the file.
After unzipping the file, you should end up with one installer and two folders:
4.       Dbl-click on “AdobePatchInstaller.exe”.
This will over write the previous 5.01 patch you installed with new one.
Since we didn't actually change the files inside the patch, but basically fixed the installer, this update has the same update number 5.0.1.
We have also updated the update manager and future automated updates won't have this issue.

Performance between two partitionned tables with different structure

Hi,
I would like if there is a difference between two partitionned tables with different structure in term of performance (access, query, insertions, updates ).
I explain myself in detail :
I have a table that stores one value every 10 minutes in a day (so we have 144 values (24*6) in the whole day), with the corresponding id.
Here is the structure :
| Table T1 |
+ id PK |
+ date PK |
+ sample1 |
+ sample2 |
+ ... |
+ sample144 |
The table is partionned on the column date, with a partionned every months. The primary key is based on the columns (id, date).
There is an additionnal index on the column (id) (is it useful ?).
I would like to know if it is better to have a table with just (id, date, value) , so for one row in the first table we'll have 144 rows in the future? table. The partition will already be on the columns (id, date) with the index associated.
What are the gains or loss in performance with this new structure ( access, DMLs , storage ) ?
I discuss with the Java developers and they say it is simpler to manage in their code.
Oracle version : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Thanks & Regards
From France
Oliver
Edited by: 998239 on 5 avr. 2013 01:59

I mean storage in tablespaces and datafiles on disk.
Can you justify please and give me concrete arguments why the two structures are equivalent ( except inserting data in T(id, date,value))
because i have to make a report.i didnt say any thing like
two structures are equivalent ( except inserting data in T(id, date,value)i said
About structure : TABLE1(id, date, value) is better than TABLE1(id, date, sample1, .... sample144)because
1) oracle has restriction for numbers of column. Ok you can have 144 columns now but for future if you must have more than 1000 columns , what will you do?
2) Restrictions on Table Compression (Table compression is not supported for tables with more than 255 columns.)
3) store same type values on diffrent columns is bad practise
http://docs.oracle.com/cd/B28359_01/server.111/b28318/schema.htm#i4383
i remember i seen Toms article about this but now i cant find it sorry ((( if i found i will post here

HT1491 I have two itunes accounts with different Apple ID's. How can I merge them into one?

I ahve two itunes accounts with different Apple ID's. How can I merge them into one account?

Apple has no provisions for this. You cannot merge multiple Apple ID's into one ID. Content is always tied to the Apple ID that was used to purchase it.

How can I read pdf files from LabVIEW with different versions of Acrobat reader?

How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
Read PDF file.jpg ‏201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

hi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Merge of two same items with different Qty in po

Hi Experts,
Is it possible to merge two Same items with different Quantity into 1.
For Eg:- 2 similar items with qty 2 & 3 must show 5 qty appearing once.Is it possible through Transnotification what should be the query.
Mona

Hi Mona,
If you want to display a Purchase Order on screen summarized by item, set the "Summary Type" to "By Item" (by default it is "No Summary"). The PO lines will then be summarized by item with total quantity for each item.
If you want to display it on the printout then you need to modify the PLD. It is quite easy actually. You can use the Repetitive Area Footer to display the summary of each item and set all fields in the Repetitive Area to be not visible and set the height to minimum height.
Cheers,
Marini

Joining two fact tables with different dimensions into single logical table

Hi Gurus,
I try to accomplish in Oracle Business Intelligence 11.1.1.3.0:
F1 (D1, D2 and D3)
F2 (D1 and D2 and D4)
And we want to build a report F1 F2 D1 D2 D3 D4 to have data for:
F1 that match only for D1-D2-D3
and data for
F2 that match only D1-D2-D4
all that in one row, so D3 and D4 are not common dimensions.
I can only do:
F3 (D1, D2)
F4 (D1, D2 and D4)
And report
F3 F4 D1,D2,D4 (all that in one row, and only D4 is not a common dimension)
Here is the very good example how to accomplish the scenario 1
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
But looks like it does not work in 11.1.1.3.0
I get
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 14025] No fact table exists at the requested level of detail: [,,Clients,,Day,ROI,,,,EW_Names,,,,,,,,,,,,,,,,,]. (HY000)
I am sure I set up everything correctly as advised in the blog but it works with only one not a common dimension
Is it a bug in 11.1.1.3.0 or something?
Thanks,
Kate

Thanks for all your replies.
Actually, I've tried the solutions you guys mentioned. Generally speaking, the result should be displayed. However, my scenario is a little bit tricky.
table Y's figures are not the aggregation of table X for D dimension. Instead, table Y's figures include not only D dimension total, but also others (others do not mean A, B, C dimension). For example, table Y stores all food's figure, while table X stores only drink's figure. D dimension is only about drink's detail. In my scenario, other foods' figure is not provided.
So, even if I set D dimension to all/total for table X, table X's result is still not the same as table Y.
Indeed, table Y does not have a column key to join to D dimension's key. So, if I select D dimension and table Y's measures at the same time in BI Answer, result returns no data. Hence, I can't compare table X and table Y's results with selection of D dimension.
Is there any solution to solve this problem?
Edited by: TomChan on Jun 3, 2009 9:36 AM

I want to connect to a network printer hp cp1518ni with different versions of windows (win7& winxp)

I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp) . My pc with win 7 work ok but the pc with win xp not "see" the printer on the network. What is the additional driver should I install?
thanks
This question was solved.
View Solution.

Hi @OHIMATAS,
I see by your post that you are unable to network the printer to the Windows XP computer, but the Windows 7 computer is connected. I can help you with this.
Make sure the Windows XP computer is connected to the correct network name, not a Guest network either.
Print a configuration page to get the printer's IP address.
Printing a Configuration Page.
Try and access the printer's Embedded Web Server on the Windows XP computer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Did it load the webpage?
If you can't access the printer's EWS, then check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
Go to start, type run in the search box, type in cmd, then type ipconfig.
Check the IPV4 address.
Now check the IPV4 address for the printer.
Do the first 3 sets of numbers match?
Try and ping the printer.
In the same window, type ping printers IP address (space between ping and IP address)
What are the results?
Run the add printer wizard through printers and faxes, if you were able to access the printer's EWS.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can PI work with different versions of MQ?

Hello
I have requirment to let PI (7.1) communication with different versions of MQ (5.3 and 6.0). However I doubt that this is possible.
As for MQ, the JMS drivers of the MQ needs to be deployed to PI. For MQ 5.3 and 6.0, different drivers (6.0 has additional jar files as 5.0) are to be packaged into com.sap.aii.adapter.lib.sda and deployed to PI. There is no way you can deploy different version of drivers onto the same PI box. even if you can deploy different version of hte driver to PI box, it won't work in runtime, simply because, when the driver is loaded, there is no way to tell PI class loader which version of class (driver) to load.
how do you guys think of this?
Thanks
Jayson

Hi
I think that the 6.0 version should be backword compatible and should work with 5.3 also.
Did you tried it?

Java Cache Viewer shows duplicate URL with different versions

In doing some testing lately we have come across a couple of situations where the same URL is showing in the JAVA cache viewer with different versions to them. In the case of a 1.7 JRE this is not causing any adverse effects however when utilizing a 1.6 JRE we are getting messages about mixed mode for the JAR files.
The jar file is signed as below:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.8.2
Application-Library-Allowable-Codebase: *
Application-Name: named_applet
Built-By: relbuild
Permissions: all-permissions
Created-By: 1.6.0_17-b04 (Sun Microsystems Inc.)
Caller-Allowable-Codebase: *
Codebase: *
understanding the need to change the wildcard's to domains as we move forward. I am wondering why the jar file is being listed and called twice and why it is being recognized as signed one time and not the next.
The URL is identical in the cache viewer and the java console says it is not found in the cache when it is used the second time, even though previously in the session is finds it with the correct version.
Any advice would be helpful

that i even know, but the problem is that i do not have that version of java re installed, but i found distribution 07 of the same java version, i'll try it out with that.
but when it still doesn't work, then i still would like to find the link where i can download java version 1.4.2_06.

How to do consolidation using two chart accounts with different currencies

Hi
How to do consolidation using two chart accounts with different currencies and do we need to use same fiscal year variant ?
What would be the impossible factors when we use two company codes with two chart of accounts ...
Regards
Kesharika

Good Afternoon
You need to use translationa and/or valuation
translation takes account in foreign currency and translates to group currency
valuation takes account in currency 1 and restates into currency 2 for a company with currency 2
so depends on which company you are consolidating for, a company in a foreign currency in that currency or consolidating a compnay in foreign currency to parent company in another currency

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

Firefox Sync on same computer with different versions of Firefox

Hi,
I know how to use Sync on two different computers and a mobile device, but how can I Sync two or more different versions of Firefox (Nightly, Beta, Aurora, Release Candidate)? I can't get the code from the other computer/firefox because I can only have one version of Firefox open at the same time. I tried it. This is my setup. I have a different Profile for each version of Firefox I have. I also have each version of Firefox installed in a different directory, for example:
Nightly - C:\Program Files\Mozilla Firefox\Nightly\
Aurora - C:\Program Files\Mozilla Firefox\Aurora\
Beta - C:\Program Files\Mozilla Firefox\Beta\
Release Candidate - C:\Program Files\Mozilla Firefox\Release Candidate\
and my Profiles are in my
Nightly - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Nightly\
Aurora - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Aurora\
Beta - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Beta\
Release Candidate - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Release Candidate\
and I run Firefox with the following command (Properties/Target)
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Nightly"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Aurora"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Beta"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Release Candidate"
Can anyone help me so that I can Sync all the accounts (basically, just the bookmarks), so I will have access to all my bookmarks, instead of going to the firefox version I saved it in? I would appreciate any and all assistance concerning this matter.
Thank You.

Use the -no-remote command line switch to open another Firefox instance with its own profile and to run different Firefox instances simultaneously, but do not use -no-remote with the default browser and the default profile.
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
Enter all details like the account name (email address) and password and the 26-character Sync key manually to connect to an existing sync account instead of using the 12-character code to pair a device if pairing isn't possible.
# open "Tools > Options > Sync" or "Firefox > Set Up Sync"
# click "Set Up Firefox Sync" to go to "Firefox Sync Setup"
# click "I Have an Account" : Connect
# click "I don't have the device with me" at the bottom to enter the account settings (email, password, sync key)
# click the "Sync Options" button at the bottom to select what to sync (Sync Options only affect the first sync)

Can NI-PSP be used to communicate between machines developed with different versions of LabVIEW?

Hi all,
A customer has a large PC application developed with LabVIEW 2010 SP1.
They would like to add extend their system with a cRIO-9075. According to this document (ftp://ftp.ni.com/pub/devzone/tut/crio_software_versions.htm ), the minimum supported version of LabVIEW (with Scan Engine support) is LV 2011.
To minimize risks, it is preferred that we don't upgrade LabVIEW for the main application, which is atively being used in production.
I was thinking of developing the cRIO software in a newer version of LabVIEW (say, LV 2013 SP1), and using shared variables only to communicate between the PC and the cRIO.
Is this a viable option? Does it matter if the PC and the cRIO have different versions of the LV runtime?

It shouldn't matter, but then with shared variables you can never know for sure -- there are so many things that can make them break.
You might be money ahead to write the comm using TCP/IP. You know that will work.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

CMS two software components with different version

Similar Messages

Maybe you are looking for