CMSXDB sample: install.sql - error out, cannot use rollback segment

I use the setup instruction and had errors when running install.sql at the following part:
connect cmsadmin/cmsadmin@&tnsname
SET serveroutput ON
PROMPT Creating Table 'OTNCMS_PERSONALIZATION'
CREATE TABLE OTNCMS_PERSONALIZATION (
USERNAME VARCHAR2(20) NOT NULL,
RESOURCELOC SYS.XDBURITYPE NOT NULL,
VIEWTYPE VARCHAR2(40) NOT NULL,
XSLLOC SYS.XDBURITYPE NOT NULL
Resulted in error-
ERROR at line 1:
ORA-01552: cannot use system rollback segment for non-system tablespace 'USERS'
Anyone knows why?

Hi,
What is the version of Database that is being used ?.
I guess there must be some issue with the database being used, the archive mode or the UNDO segments. As a workaround, you can remove the following command from install.sql and run the sql script again.
alter user cmsadmin default tablespace users;Regards
Elango.

Similar Messages

PL/SQL: ORA-22992: cannot use LOB locators selected from remote tables

Dear ALL,
My O/S is Redhatlinux 5.2 and i had Migrated my Oracle databse to 11g2. But after that while i am retrieving records through dblinks from one of my other Oracle 9.2.0.8 databse it's throwing the error : PL/SQL: ORA-22992: cannot use LOB locators selected from remote tables.* This error i am getting in TOAD as well as SQL Developer.
Can anybody tell me how to fix this error ? Because am not able to get the records.
Also am getting another error during retrieving data from some of my tables after migrating i.e the table which having CLOB data type while am accessing to retrieve the records using select query it's throwing the error :
+(The following error has occurred:+
A query with LOB's requires OCI8 mode, but OCI7 mode is used.)
If anyone having any idea kindly share.
Thanks and Regards
Biswa

Hi,
Ya what u sent that is fine. But already am using one procudure which is accessing LOB data from another databse through DBlink and working fine. But there Both the databse are 9.2.0.8.
But while am executing the same procedure in oracle 11g where the Dblink accessing the data from Oracle 9i , there am getting this error.
Kindly tell if u know any resolution.
Thanks

Error message "cannot use the spot healing brush because the scratch disks are full. What does this mean? PSE9

Tried to use the spot healing brush and clone stamp and got error messages "cannot use because the scratch disks are full." What does this mean? PSE9

Elements uses drive space to make its calculations, like someone writing down measurements on a scrap of paper. How much free space is there on your hard drive?

ORA-01581: attempt to use rollback segment...

We've started getting "ORA-01581: attempt to use rollback segment (31) new extent (3) which is being allocated" messages in our production database over the last couple of days. Of course, each time we get these the rollback segment number is different, and we are getting these randomly from different applications that connect to the same database. We are using automatic undo management, so the rollback segments are not really under our control. The action in the Oracle docs for this error message doesn't give any specific actions that we should take, but we continue to get these.
We started to get these about the same time as we ran out of available sessions on the database (sessions = 1500 and we had 1500 open sessions). Could these be related? Could there be some open session that may be causing the rollback segment issue? Would a restart of the database fix this? Of course the max sessions issue was cleaned up two days ago but the rollback segment issue is a lingering problem.
Any help would be appreciated. We couldn't find anything for this online and Oracle hasn't responded to our service request yet.
Thanks,
Bobby

As I understand it, you can not explicitly set the size for the undo segments in automatic undo management mode. From the Concepts guide:
"In automatic undo management mode, the system controls exclusively the assignment of transactions to undo segments, and controls space allocation for undo segments."
It looks like we are also using the default storage options that are set when the UNDO tablespace was created. Here is the DDL used to create this tablespace:
CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS" DATAFILE '/alpha/oradata/prod01/undotbs01.dbf' SIZE 750M REUSE AUTOEXTEND ON NEXT 25600K MAXSIZE 2000M , '/alpha/oradata/prod01/undotbs03.dbf' SIZE 2000M REUSE AUTOEXTEND ON NEXT 51200K MAXSIZE 2000M , '/alpha/oradata/prod01/undotbs04.dbf' SIZE 2000M REUSE AUTOEXTEND ON NEXT 104K MAXSIZE 2000M , '/alpha/oradata/prod01/undotbs02.dbf' SIZE 2000M REUSE AUTOEXTEND ON NEXT 25600K MAXSIZE 2000M

Error while creating the rollback segment (Oracle 8i & OS Win NT)

hi
I am using Oracle 8i and when i am creating the new rollback segment for my database i have got following error message
ORA-01593 Rollback segment optimal size (30 blks) is smaller than the computed initial size (2560 blks)
CREATE ROLLBACK SEGMENT "RBS11" TABLESPACE "RBS1"
STORAGE ( INITIAL 120K NEXT
120K OPTIMAL
240K MINEXTENTS 2
MAXEXTENTS 100)
Note:- db_block size is 8k
Tablespace RBS1 is the Locally managed Tablespace having datafile of 50m and uniform size of 10m
But Given statement processed while i am using Tablespace RBS (winch is data dictionary managed)
Plz, suggest me to cause of that error and solution

You said 120K optimal and initial is 120K with minextents of 2. The optimal size then will be smaller than the initial allocation for the rbs.
ORA-01593: rollback segment optimal size (string blks) is smaller than the computed initial size (string blks)
Cause: Specified OPTIMAL size is smaller than the cumulative size of the initial extents during create rollback segment.
Action: Specify a larger OPTIMAL size.

Is "SET TRANSACTION USE ROLLBACK SEGMENT" only a hint

I have two users, one makes some inserts in a table.
The other makes a select which visits many rows.
I have a big rollback-segment.
To ensure, both users use this rollback-segment I created a logon-trigger:
CREATE OR REPLACE TRIGGER a_logon AFTER LOGON
ON DATABASE
WHEN ( USER IN ( 'SCOTT', 'BOB' ) )
BEGIN
SET TRANSACTION USE ROLLBACK SEGMENT rbs_big;
END;
But I still get "snapshot to old" messages from the select, which contains the name off an other rollback-segment in the message.
The trigger really fires, i tested it by adding an insert-statement to a log-table.
What`s wrong ?

The set transaction use rollback segment lasts only until you commit or rollback first time and all other transactions in that session will not be forced to that rbs anymore. Other possible solution could be that other users are accessing same tables / updating them so those sessions can't keep the read consistent image available anymore for your sessions.

Boot camp install would error out

I had multiple issues as well.
When I first tried to install 8.1 full as a fresh boot camp install it would error out and say that the required files were not there to install.
Then I would try it again and it would then get close to finishing and say it cant change the boot order and fail.
Apple please fix as soon as possible.
<Re-Titled By Host>

What's happening here is that the Windows installation, for whatever reason, is not booting properly. It is also set as your default boot system. To change this, reboot your mac while holding down the Option/Alt key. After awhile you will be presented with two icons, one for OS X and the other for Windows. Select OS X and then press Enter.
OS X will boot. Go to System Preferences >> Startup Disk and then select your OS X partition and this won't happen anymore.

SQL Error 207 when using Query Designer

Hi experts I hope you can help me out with this it is urgent!
I am crating a Query on the query designer NW04s, when I add a column from my info provider I get the following error:
CX_SQL_EXCEPTION Occurred (program: cl_sql_statement========cp etc.
I check the WP log and I found this:
C Wed Jan 31 10:22:59 2007
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'TXTMD'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296924022803]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'TXTSH'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296924022803]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'LANGU'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296924022803]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'CURRENCY'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296924022803]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 100. stmt: [select [S00].[CURRENCY] AS [0000000023] , [T00].[TXTSH] AS [0000000
C /* R3:CL_SQL_STATEMENT==============CP:399 T:/BI0/SCURRENCY */
C ]
C Conn_i:1 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 1122000
C dbdsmss: DBSL100 SQL207
C Invalid column name 'CURRENCY'.Invalid column name 'LANGU'.Invalid column name 'TXTSH'.Invalid column name 'TXTMD'.
B ***LOG BY2=> sql error 207 performing OPC [dbds#1 @ 482] [dbds 0482 ]
B ***LOG BY0=> Invalid column name 'CURRENCY'.Invalid column name 'LANGU'.Invalid column name 'TXTSH'.Invalid column name 'TXTMD'.
B ***LOG BY1=> sql error 207 [dbacds#2 @ 1422] [dbacds 1422 ]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'TXTMD'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296940022803]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'LANGU'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296940022803]
C sloledb.cpp [ParamStmtExec,line 12768]: Error/Message: (err 207, sev 16), Invalid column name 'UNIT'.
C Procname: [##Y4CWP_JFR_wpf00000074440000296940022803]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 100. stmt: [select [S00].[UNIT] AS [0000000008] , [T00].[TXTMD] AS [0000000008_
C /* R3:CL_SQL_STATEMENT==============CP:399 T:/BI0/SUNIT */
C ]
Dont know what is going on,
Regards,
Alejandro.

Hi Its quite difficult to analyze,however are you on latest FEP SP 11??
if not try downloading from
service.sap.com/swdc>Download>support packages and patches>Ebtry by application component>Support Packages and Patches" SAP Frontend Components" SAP GUI FOR WINDOWS" SAP GUI FOR WINDOWS 6.40-->Win 32
for 3.x front end bw350_11-10001615.exe
for Nw2004s front end - Bw700SP11_1100-10001615.exe
Hope it Helps
Chetan
@CP..

SQL Error 40804 : Cannot import local database to Azure in new SQL Azure version V12

Hi,
The 'West Europe' Region is now live with the 'new' portal. Is there a way to import an existing database into SQL Azure V12 without producing SQL Error 40804.
Regards
David

hi David,
From your description, It seems that this issue is more related to SQL Azure , I suggest you could post this issue on SQL Azure for better support.
https://social.msdn.microsoft.com/Forums/en-US/home?forum=ssdsgetstarted
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can we see the old value using rollback segment no?

hi
querying the following
SELECT * FROM joschedule AS OF TIMESTAMP To_Timestamp('5-jul-09 8:50:58','DD-MON-YY HH24:MI:SS') where unitid = 1 and joborderno = '91260050' but im getting the following error. How to see the using the segment no.
ORA-01555: snapshot too old: rollback segment number 1 with name "_SYSSMU1$" too small kanish

Well, as the error says, you do not have the rollback anymore that is required to build the old snapshot that your query specifies.
You may want to increase the undo_retention parameter to specify how long Oracle should (try to) hold on to rollback data for this type of queries.

ORA-01581: attempt to use rollback segment (5) new extent (67) which is being allocat

While importing a table, I got the following errors. Basically, the server couldn't extend the rollback segment. I checked the disk space, tablespace extents (unlimited), and segment extents (unlimited), but I couldn't find a reason that the segment couldn't be extended.
What else do I have to check?

As I understand it, you can not explicitly set the size for the undo segments in automatic undo management mode. From the Concepts guide:
"In automatic undo management mode, the system controls exclusively the assignment of transactions to undo segments, and controls space allocation for undo segments."
It looks like we are also using the default storage options that are set when the UNDO tablespace was created. Here is the DDL used to create this tablespace:
CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS" DATAFILE '/alpha/oradata/prod01/undotbs01.dbf' SIZE 750M REUSE AUTOEXTEND ON NEXT 25600K MAXSIZE 2000M , '/alpha/oradata/prod01/undotbs03.dbf' SIZE 2000M REUSE AUTOEXTEND ON NEXT 51200K MAXSIZE 2000M , '/alpha/oradata/prod01/undotbs04.dbf' SIZE 2000M REUSE AUTOEXTEND ON NEXT 104K MAXSIZE 2000M , '/alpha/oradata/prod01/undotbs02.dbf' SIZE 2000M REUSE AUTOEXTEND ON NEXT 25600K MAXSIZE 2000M

How can I avoid using rollback segment for batch updates.

I am currently trying to avoid associating a large amount of space for rollback segment as this gets filled up only during the nightly batch updates. All that space will never be used during the day. Hence want to know if there is any way of avoiding the use of rollback segment at the session level.
Rajesh

No, but what you can do is create a large rollback segment to use with your batch job, at the start of your batch job bring the segment online, then use set transaction to use that rollback segment, when the batch job is finished and committed, you can then bring the rollback segment offline.
If you are really pressed for space, as an alternate plan, you could actually create the large segment before the batch job and drop it after.

Set Transaction Use Rollback segment

Hi everybody. Does It make sense issue a "set transaction use rollback" for a single query that do not update, insert or delete. The trouble is that I get e "SnapShot too Old" for a query that just do a query.
Thanks!

No, If you are not making any modifications then you do not generate rollback (or even a transaction to my knowledge). The SNAPSHOT TOO OLD is because a different session has run through the rollback for the read consistent view you need (either because someone made changes to a table you are reading or from delayed block cleanout). Delayed block cleanout is a pretty complicated scenario so I'll leave it to the Oracle documentation to explain that. Just be aware that even if nobody has made changes to the table since you started your query you can still get SNAPSHOT TOO OLD. Thankfully, 9i helps elleviate this somewhat with the introduction of UNDO TABLESPACES.
Richard

Help with Installing flash error- metafile cannot be loaded

I read the forum on this but it ended last year and there was no response to some recent questions on this and the direct email to the Adobe rep. on there got no response.
I am having this problem with installing Flash- it gets about 30% of the way and then a message comes up that says the metafile cannot be loaded.
I am running 10.7.5 on Mac, all browser software is current. I use both Safari and Chrome. After it said Flash was out of date I tried to update but got the metafile error. So I uninstalled Flash to install it fresh but the same error came up. I tried everything recommended from the forum. I also did all the steps from the help list direct from Adobe ( deleting Flash files, folders, rebooting, etc.) The offline link Adobe provides says the "file cannot be found" so I can't download that either. So I tried the online link download, but even after doing all the steps in order etc. I still get the error when I try to install it.
I have no firewall and have no virus software running. I also tried the direct offline links that others have provided from 2013, (unfortunately they are old) in both clicking on them and also downloading by right click but they are dead links and even the download for it has no content.
Any help that is more recent than last year? If this is in the wrong place, apologies. New to the forum.

I tried all solutions but one posted in adobe support. I am local administrator but IE security settings are set by group policies and buttons in tools security setting are grayed out.
After three days with "The ActiveX control for Flash Player could not be registered" message I tried registering the activeX control manually.
Bingo! that made the trick.
So open a DOS window, type "regsvr32.exe C:\WINDOWS\system32\Macromed\Flash\Flash10d.ocx" -first check if this directory exists and contains the Flash10d.ocx (no quotes needed) and you should receive a confirmation that it registered correctly.
I must say that I've tried so many ways that I cannot repeat the correct order before this has worked ;-(
Hope it works for you all

The latest update has caused a runtime error and cannot use i tunes

i have just tried to put the latest update on my laptop and it has caused a runtime error and now cannot install i tunes at all.

have you use latest version of nvidia driver, you have a compatibility issue here.

CMSXDB sample: install.sql - error out, cannot use rollback segment

Similar Messages

Maybe you are looking for