CNVMBTDTL_CLUSTER_DELETE job aborted - missing required key field

Hi Experts,
I believe this problem has been reported before.
The CNV_MBT_CNVMBTDTL_CLUSTER_DELETE (Postprocessing: PC002_DTL_CLUSTER_DELETE_SND) was aborted.
In the job log, the failure was due to missing required fields.
The recommendation is to run the SGEN transaction to regenerate the DMIS components.
But what I would llike understand is what is causing this problem? Why do the DMIS component need to be regen?
Thank you!
Best Regards,
Bee Huang

Hi Niraj and all,
Thank you for your response!
I have not run the SGEN but would like to understand the reason. Any note to address this problem? We just upgraded to SP14 for DMIS/DMIS_CNT. We did not see this problem earlier on in a lower SP. Is the bug related to SP14?
Thank you again.
Best Regards,
Bee Huang

Similar Messages

  • Input file missing required key: [Distribution] GUID.

    Hi,
    I freshly converted a .bld (LV7.1) file to .lvproj (LV11) through Tools > Convert Build Script. It ran well.
    Opening the .lvproj, I then successfully build the .exe but failed on the Installer :
    Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
    CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
    Loading product deployment information
    Adding files to installer
    Validating...
    Copying files...
    Scanning files...
    Updating files...
    Build complete successfully.
    Done adding files
    Preparing to build deployment
    Copying products from distributions
    Building deployment
    Copying setup files
    Setting merged database information
    Setting product information
    Setting developer part information
    Starting final build
    *** Error: An internal tool or library returned an error. (Error code -21)
    Error Messages
    Input file missing required key: [Distribution] GUID.
    *** Error Details:
    Error in MDF API function: _MDFBuildDist_Build
    Error List
    .\InputParser.cpp(5420): InstallerError 105
    Input file missing required key: [Distribution] GUID.
    <No Debug Message>
    *** End Error Report
    Done building deployment
    Any idea ?
    Many thanks

    Not too sure... Is your installer supposed to create any keys in the registry?
    Anyway, open your installer's build specification and check all the sections, I would suggest to bring specific attention to the following sections :
    - "Source Files", because here, all the "extra files you want you installer to place in specific format have to be included/referenced in the project (.lvproj)
    - "Registry", that's only if the installer is supposed to create keys in the registry
    - "Additional installers", make sure you only tick the boyes corresponding to drivers/module that are required for you application and also make sure that when building, the installer you used to install those drivers/modules on your computer are still available.
    Hope this helps
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

  • Why do I keep seeing Missing required field: Publication when I try to publish a file in iBooks format?

    I have produced a book in iBooks format and filled in everything asked for including but I can't slide the file into the window area and I get a message, Missing required field: Publication. I don't understand what I need to do to complete the transaction. I hope someone can understand and tell me what to do. Thank you.

    Thank you. You're dealing with an old woman doing her best here.   Sorry, I was somewhat distracted when I posed the question having been wrestling with it all afternoon. Yes, I am using iTunes Producer and have filled in all the information requested including cover art. The file is saved in iBooks format.
    I click on Files at top left, which I assume to be the thing to do, and get a a new page showing red circle with a number 1 in it. Clicking on that produces this :
    "Drag and drop the full book that will be used on the iBooks store. Books can be in the EPUB or iBooks format. Submitting a new book version will replace the existing version on the iBooks store.
    Missing required field: Publication. "
    I have tried to drag and drop the file into the box on the left but it won't allow me to. Clearly something is missing but I don't know what. I am just baffled as to what is wanted.

  • To save to the server, correct the invalid or missing required fields.

    We have a SharePoint 2010 document library that has a required field that is from an external data source.  When we open existing Excel documents, a ribbon appears stating "To save to the server, correct the invalid or missing required fields.". 
    If you go File>Info>Document Information Panel you will see this external data source field with a Red Asterisk and it says "Show Details".  If you click "Show Details" it will show you the "Document Properties - Server"
    toolbar and you will see this field populated.  It is however read only, and I believe that it is because its an external data source.  It will not let us save any excel documents as it seems that Excel feels this field is empty or incorrect.
    The same happens with Microsoft Word documents, in that if you open an existing document and go to the document control panel you will see the external data field with a Red Asterisk and it says "Show Details".  If you click "Show Details"
    it will show you the "Document Properties - Server" toolbar and you will see this field populated but read only; the difference is with the Word documents we can save and close the documents.  If we upload a new excel document, it behaves
    just like word documents, so it seems its only applicable to existing excel documents.
    Over the past 2 weeks we have upgraded from SharePoint RTM to SharePoint SP2.  This is has never been reported prior to the upgrades so I am assuming, but cannot confirm, if it was caused by the upgrades.
    I see there are workarounds online for Word, but nothing for excel. 
    Any help for further troubleshooting would be greatly appreciated. 
    Thanks
    Ken
    Kenneth Clebak

    Hi Ken,
    According to your description, the error will occur when saving the documents in the library which has an external data column from client application.
    The document which cannot be saved may contain invalid XML information or invalid XML properties.
    I recommend to remove the invalid XML information before you save the documents:
    Open the document in corresponding client application.
    Click File, click Info, click  Check for issues, and then click Inspect Document.
    In the Document Inspector dialog box, accept the default options, and then click Inspect.
    In the Document Inspector dialog box, click Remove All, and then click Close.
    Best regards.
    Thanks

  • Itunes producer delivery erroe Missing required Field Vender Identifier

    I'm submitting a new book and sample both made in iAuthor the delivery error meesage is: Missing required field: Vendor Identifier
    When I click on the error message it takes me back to the ISBN number. I have checked and I am entering the correct 13 digit number without any spaces or hyphens and can't see anything else to corrrect.

    Thanks Fabini -
    That worked - "Your package has validated correctly."
    Many Thanks for the help.
    Darren
    (haha! Sod's Law: "The iTunes Store is temporarily not accepting deliveries due to planned maintenance....." - but looks like it will work tomorrow!)

  • Unable to save a form with missing required fields

    I have a form, with required fields, as part of the new hire process. I would like to make sure the user fills in the required fields before closing/saving the form.
    I have a custom script that highlights the missing required fields when the complete/validate button is clicked.
    This, however, doesn't stop the user from saving the form. As a result, we are getting incomplete forms returned.
    Is there a way to stop the user from saving the form until the required fields are filled ?
    Thanks in advance.
    Aditya

    I have a "validate" button that sets a flag (for workflow). This button will perform the check and highlight the missing fields.
    Once the user completes the form, he/she saves and emails the form. The reason for not having the email button is because not all users will have outlook and wouldn't want to go through the wizard.
    I understand your point but I need to know if there is some solid way of not allowing the users to return the form without completing the form.
    If I include an email button, the users can still save, by using the toolbar menu, and email the incomplete document.
    As we are planning to implement Digital Signatures, would it be possible to have the check in the presign event. Will this prevent the document fron being signed until the required fields are filled ?
    Thanks
    Aditya

  • Key Field missing in transformation

    Hi
    I am trying to use BI7.0 transformation (1-1 mapping basically) to send data from one DSO to another DSO
    Source : DSO1
    Key fields : Account ,Itemid, Position number
    Target: DSO2
    Key fields : Account ,Itemid, Position number
    However when i create transformation i don't see "Itemid" in the source side in the transformation mapping. Rest of the two key fields are present.
    Please help.
    -Anurag

    Hi, Anurag.
      I just posted a question to the forum, because we are implementing the same architecture, and we are wondering how deltas will work with this
    architecture.  Are you using deltas? 
    The text of my recent post is below. 
    We are loading from R/3 into DSO1, and then from DSO1 into DSO2.  The R/3 extractor that loads DSO1 is
    delta-enabled.  We are not sure, however, if a delta mechanism governs the load from DSO1 into DSO2.  The
    DTP says its extraction mode is delta, but does that mean, if a row in DSO1 changes, it will negate the key figures
    on the  original row and send a new row the way R/3 does?
    For example, suppose the R/3 extractor sends us Row 1. 
    Row 1 has a key figure with a value of $100.
    Row 1 gets changed in R/3, and the new value is $125. 
    The R/3 delta mechanism takes care of this by negating the key figure on the appropriate row and sending us a correcting
    row.  For example,
    the R/3 extractor will send us:
    Row 1 $100
    Row 1 -100
    Row 1 $125
    So... the net value is correct, i.e. 100 - 100 + 125 = 125. 
    When we load from DSO1 into DSO2, however, do you know what rows will load into DSO2?  Is BW "smart" enough to do this
    type of negation?
    Thanks!

  • "Fill in all required entry fields"

    Hi,
    I am executing a program in background using a variant.
    But background job is getting cancelled with messge "Fill in all required entry fields"
    Can anyone help with the possible cause and solution for it.

    Hi Preet,
    I think may be you are missed the filling the mandatory fields..while creating your variant.
    for seeing those
    you can do one thing go to SM37 select your batch job and put JDBG (just JDBG not /nJDBG or /oJDBG) in the command line and hit enter..it goes to the debugging mode.
    so that you can replicate your job there.. and you find out by your own where that error message is coming.
    Thanks!

  • Field Status Groups Vs  Posting keys Field Status Groups

    Hi, Seniors,
    In my job posting Keys field status group fields I never used as required field  some cases just I used only Special G/L transaction Indicators except this I kept all the fields as Optional.  My doubt is How this fields can be used as independent priority If there is no important why dont we use only field status group fields like G001, G002, .....  why should we depend on Posting keys field status group Fields.
    Thanks in Advance
    Sarath babu

    Hi Sarath,
    If you do any chages in the FSG it will applicable to all G/L accounts which are using the same FSG. But if change posting keys FSG then it will applicable only to that particular posting key it wont effect rest of the G/L's. But you should takecare of the below things.
    I. A field which is suppressed at the posting key level shouldn’t be required in the
       field status group specified in the General Ledger Account.
    II. A field which is suppressed in the field status group under General Ledger
       Account shouldn’t be specify as required in the posting key level. 
    III. Posting keys are defined by Account type wise.
    Rams.N
    If this is helpful assign me points

  • Key Fields & Data Fields in DSO.

    In Standard DSO, Maximum how many number of key fields and data fields we can enter in one DSO?
    For e.g : In Cube Char - 248      KF - 233
                  In DSO Key Fields - ?   Data Fields - ?
    Regrards,
    Nithi.

    Hi Nithi,
    Since Key fields are decide by us we can add according to our requirement.
    Key fields can only be 16 you cannot exceed this. but if you have more key fields, you can combine fields using a routine for a key field
    Max Data Fields - 749 data fields can be added in a DSO.
    Warm regards
    Gokul

  • Creation of key field in a database table

    Hi All,
    As per my requirement, i have to add few new key fields in an existing table.
    Now total number of key fields are 17, but while saving this is giving me an syntax error stating 'According to SAA standard key fields cannot be more that 16'.
    I s there any other go? i can not reduce the number of key fields.
    Regards,
    Pankaj.
    Edited by: Pankaj Bist on Sep 5, 2008 3:24 PM

    Hi,
    In the se11 transaction,In the menu bar o like this.
    Utilites-->Database Utility and the Press the button Activate and Adjust Database.
    Note:
    Make sure that you total data in the table to be downloaded into ur system.
    As ctivate and Adjust Database makes data to be deleted.
    Regards,
    Rama.

  • DSO Key Fields Deisgn

    Hi Experts,
    I have Sales Schedule data( DSO ) and Delivery Item data( DSO ). I would like to combine this two DSO into one new DSO in order to get the Open Order Quantity ( Order Quantity - Delivery Quantiy ).
    Fields in Sales Schedule DSO are
    Sales Document   ( Key Field )
    Sales Docment Item ( Key Field )
    Schedule Line  ( Key Field )
    Material Avail Date  ( Data Field )
    Order Quantity  ( Key Figure )
    Fields in Delivery Item  DSO are
    Delivery Number ( Key Field )
    Delivery Item Number ( Key Field )
    Document number of the reference document   ( Data Field ) which is refered to the field Sales Document in 1st DSO
    Item Number of the reference document  ( Data Field )  which is refered to the Sales Document Item in 1st DSO
    Delivery Quantity  ( Key Figure )
    I would like to create new DSO based on the common fields Sales Document (DSO1)= Document number of the reference document ( DSO2)
    and Sales Document Item Number ( DSO1) = Item Number of the reference document (DSO2)  in the both DSOs.
    I required feilds like Sales Document, Sales Document Item, Material Avail Date, Order Quantity and Deliver Quantity ( Some other fields which are not mandatory ).
    Would like to create new DSO on top of two DSOs, please suggest me what are the Key Fields and Data fields should be in the new DSO.
    Your quick help is really appreciated.
    Thanks
    Robert.

    Hi Robert,
    Define the key as a combination of the keys of both DSO:
    Sales Document ( Key Field )
    Sales Docment Item ( Key Field )
    Schedule Line ( Key Field )
    Delivery Number ( Key Field )
    Delivery Item Number ( Key Field )
    Map the sales doc from the delivery to the key as well.
    This will ensure you have a unique key and your data will be aggregated correctly when reporting.
    Cheers,
    Diego

  • ODS Key Fields and Data Fields

    Hi Gurus,
    While creating an ODS how do we decide whether a characteristic has to be defined as a key field or a data field.
    Thanks,
    KR

    Hi KG,
    Key fields in the DSO are the primary keys in the active data table, depending on the keyfields the data in the aggregates will be overwrited.
    It depends on the requirement we will decide what are the keyfields has to be taken. To utilise the overwrite functionality of the DSO depending on the data which is coming into bw we take keyfields.  If u are using DSO as a staging then u have to lookinto the corresponding tables of the DSO, what are the primary keys in those tables..
    Khaja

  • How many key fields can we have in a DSO?

    Hi,
    how many key fields can we have in a DSO.is it 16 or any number of key fields can be used? If only 16 are allowed pls let me know how to add more key fileds (my requirement is 21 keyfields) .
    Thanks in advance,
    Praveen

    Hi,
    Thanks for the reply. Pls let me know the procedure to include 5 more key fields because i have 21 keyfields which i have to use.
    Thanks&Regards
    Praveen

  • Adding fields into DSO in the Key Fields

    Hello Experts,
    I am using a Cube which loads data from DSO. Now, for some requirement I have to add one field into DSO in the key  fields Part. But DSO already has 16 fields which I cannot remove.
    So how can I add one more field into DSO in this case?
    The cube I am using is 0FIGL_C10 and the DSO is 0FIGL_O10.
    Regards,
    Nirav Shah

    You can create an Infoobject - acts as a custom key to concatenate multiple fields into one and make it a keyfield.
    15 fields + custom key ( concatenate 2 fields ) = 16 Keyfields
    Procedure  - > Example
    16th Key - > RVERS-Version-CHAR-3-0VERSION
    17th Key - > RMVCT-TransactnType- CHAR-3-0MOVE_TYPE
    1. Create one infoobject - ZKEY - Length = 6 ( add lenghts of the two objects)
    2. Make ZKEY as a keyfield for the DSO.
    3. Make 16th Key and 17th Key datafields.
    Create a routine for ZKEY in the transformation or transfer rules to concatenate values coming from source into one.
    TRFN Routine
    Concatenate SOURCE_FIELDS-RVERS SOURCE_FIELDS-RMVCT into RESULT.
    Or
    Transfer Rules Routine
    Concatenate COMM_STRUCTURE-RVERS COMM_STRUCTURE-RMVCT into RESULT.
    This way nodata will be lost/overwritten due to less number of keyfields in the DSO.
    We have as many as 21 Keyfields for GL Totals DSO.

Maybe you are looking for