CO15 quantity field as uneditable

Hi,
Can any one tell me how to make the BOM Quantity field as uneditable in goods movement overview screen of CO15 Transaction ?
Regards,
Krishnam Raju

Contact functional team to find possibilities on disable field through configuration, if its not possible then look for user exit / badi for CO15.

Similar Messages

Confirmed quantity field

Dear Guru ,
We are developing an abap program that can do the the production order confirmation ( like CO15 ) .
In order to calculate the open quantity ( "Current to Confirm" field in CO15 ) , we need the "Already Confirmed" field .
Is the "Already Confirmed" field saving in table "AFRU" ? I saw there have two fields : GMNGA & LMNGA , But i am not sure which one can be used .
And i am also not sure the relation-ship between AFPO & AFRU , because in my abap program , i only have the production order number as a parameter .
If i search the record on AFRU table with production order number , the performance will be very bad ... Does another solution can improve the performance ?
Many thanks .
Best Regards,
Carlos

Hi Carlos,
As AFRU is the confirmation table for production/Process orders. and if u want to use the order confirmation from some ABAP development then u should use AFRU for the quantity field.
Are u using any fuction module for this?
AFPO is just the Order item table, that u can use to verify the production order no. but not the confirmed quantity. Use the field "GMNGA" and also take care of the reversal too.
Thanks,
SISL !!

Sales order quantity field editable even when billed.

Hi Gurus,
Good Day to you all!
We have this sales order that is already delivered and billed. I was just wondering why the sales order 'order quantity' field can still be changed or is still editable? Is it standard procedure that it would be disabled and uneditable? Is there a configuration behind this?
We have some sales orders that are directly billed without any need for delivery. These sales orders shows the order quantity as disabled and uneditable unlike the one stated above. Anyone can please help regarding this problem
Thank you very much!
Best Regards,
JV Nunez

Dear,
User exits in the program MV45AFZZ - USEREXIT_FIELD_MODIFICATION or USEREXIT_SAVE_DOCUMENT
SEREXIT_FIELD_MODIFICATION -> you can disable/enable screen fields by using this user exit as you want quantity in VA02.
screen-name = 'RV45A-KWMENG' OR " Order quantity
screen-name = 'VBEP-WMENG' OR " Order qty in Schedule Lines
screen-name = 'RV45A-KMPMG'. " Order quantity in "Structure" tab
SCREEN-INPUT = 0.
Please check with ABAPr.
Regards,
R.Brahmankar

Subcontract GRN - disable quantity field for 543 movement type

Dear All,
1) while making the GRN for subcontract PO the raw material will get consumed by 543 movement type but here the field is editable and we need to make it uneditable
2) also if you might have observed that raw material qty will be calculated as per ratio but if i change the semi-finished matl qty the consumption qty of RM is not amended immdiately and if we need to take as per ratio in PO, we need to close the line by pressing " + " and amend the semi-finished qty and system will calculate the ratio and you can check by again pressing "+"
this is certainly not desirable and we need the change in RM qty immedietely after changing semifinished goods qty.
Please suggest me how to make it without help of ABAPER.
Regards,
Vimlesh

Hi,
Saying with regret that it is not possble in standard SAP .we had faced the same problem at my cleint side.We had gone for a custom development where the quantity field against the Input material will be not editable .
Regards
Sandeep

Regarding Editable Quantity field in ALV Grid

Hi Experts,
I need your advice in this 2 scenarios.
1.I have a scenario where quantity field in output is editable and the user wants the quantity field printed without thousand separator. If i take a char field and display the field is editable then user may mistakenly type a,bcd...z/ special characters which it should not capture. Is there any char data type data element which accepts only integers. Because after that i need to save that value in z database table quantity field.
2. when there i raised an error message after validation of that editable field in alv output(by events), the user wants all other rows in that grid as uneditable except the row which has got error till this error is solved. Is this possible. If yes how.
Please share your valuable suggestions.

Hi abilash n
as in dictionary, all quantity fields should have a reference to the unit field which then defines the number of decimals.
The rest is done automatically as long as you do it standard way. In field catalog you have to set the fcat-qfieldname to the name of the field that has the unit.
If you do so, also totals will be grouped by unit.
SAP has really done a great thing by inventing units for quantities (and currency keys for currency amounts). Only developers do not understand and thus refuse to use it.
Regards,
Clemens

Quantity fields not getting displayed in the second total row

Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
Abhishek

You can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

Make quantity field of Free goods as non-editable.

Hie!
I have free goods scheme of 9 + 1 .If quantity of main material is 10 then it will split into 9 + 1 where 1 is free of cost.
While making the sales order the free goods quantity field is editable. So the users are able to change the free goods quantity. I want to make this field as non-editable.
Please suggest how to do this.
Thankyou.

Hi Pallavi
If you change the manual qty which is automatically determined by the system then there will be a message thrown by the system
Suppse in your case if 9+1 you change the qty manually to 2 from 1 there is a message V1 no 737 thrown by the system
You need to change the message class thro ABAP development only not possible thro customization
Not only this in delivery also it is possible to change the free qty and this also has to be controlled by the ABAPer only
Regards
Raja

ALV QUANTITY field Geting converted into decimals ?

Hi All ,
I have developed an alv report .In that the quantity field is made editable after editing the quantity when i save it .It gets converted into decimals.Suppose if i give 77 its getting reflected as .077 all the field name ,table name ,reference field name, reference table name, quantity field data type has been passed but the problem persists.If there is any one whos has come across this kind of scenario please share your thoughts on this.
Best Regards,
Sreeram

Hi Sreeram,
I am not gettin this issue. See below code :
If you are gettiing the same issue with the below code then it has something to do with your user settings.
Go to Menu Item System -> User Profile -> Own Data -> Defaults ->Decimal Notation.
Set it to 1,234,567.89 and save. Now try the program again.
REPORT z_test.
TYPE-POOLS: slis.
TYPES : BEGIN OF ty_ekpo,
          ebeln TYPE ebeln,
          ebelp TYPE ebelp,
          ktmng TYPE ktmng,
          menge TYPE bstmg,
        END OF ty_ekpo.
DATA: it_ekpo TYPE TABLE OF ty_ekpo,
      it_fieldcat TYPE slis_t_fieldcat_alv.
SELECT ebeln ebelp ktmng menge
FROM ekpo
INTO TABLE it_ekpo
UP TO 20 ROWS.
PERFORM add_fieldcat USING 'EBELN'.
PERFORM add_fieldcat USING 'EBELP'.
PERFORM add_fieldcat USING 'KTMNG'.
PERFORM add_fieldcat USING 'MENGE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   i_callback_program                = sy-repid
   it_fieldcat                       = it_fieldcat
TABLES
    t_outtab                          = it_ekpo
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORM add_fieldcat USING p_fieldname TYPE slis_fieldcat_alv-fieldname.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-ref_fieldname = p_fieldname.
wa_fieldcat-ref_tabname = 'EKPO'.
IF p_fieldname EQ 'KTMNG'.
    wa_fieldcat-edit = 'X'.
ENDIF.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM.                    " ADD_FIELDCAT
Regards,
Jovito

Quantity field in ALV

Hello All,
I am using OO - ALV in which I am displaying a quantity field.This field is an editable field and if user tries to change the value and SAVE , it is taking some wrong values.
Say suppose I am having 1.000 as the initial value and if user changes it to 2.000 and saves it is converted to .002.
I tried with qfieldname , ref_fieldname of fieldcat but of no use. Anything apart from this will be highly appreciated.
Regards,
Dhwani

User might be changing the value to only 2 and you might have declared the fieldcat with 2-3 decimal places. If you enter value with decimals say 2.001 it will take.
Otherwise you need to replace it with char value as Nanda has suggested.
Hope it helps.
Thanks,
Jayant

Quantity field in ALV Grid

I am using KWMENG data element in my ALV grid which is a quantity field. In normal dialog programming this field does not allows entering characters in editable cells. But in ALV grid I am not able to restrict it from entering characters.
Eg: In VA01 if we try to enter any character "ABC...Z" then it wouldn't be typed in the screen. But when using the same data element in ALV grid iot allows to enter alphanumeric values. Since it's a quantity field so character value gives a short dump. I know I can restrict the dump by using "NA" in comparing string but I want to knw is there a way by which I restrict character field entry in alv grid, the same way this field works in VA01. I checked with a simple dialog prog and in that also it doesn not allows character typing in editable fields.

simple solution
mention the ref_fieldname and ref_tablename in the fieldcatalog for that column.
ex:
fieldcat-ref_fieldname = 'KWMENG'.
fieldcat-ref_tablename = 'VBAP'.

Quantity field in alv display

Hi all.
we are phasing a problem.
I am using alv to display in output.
I am using a Quantiti field (BDMNG),.
in this field if nodata is there then it is showing 0.000(that is the default value).
I don't want those zeros.I want only space(blank only).
Can any body help me to solve this issue.
Thanks in advance
Eswar.

Hai,
While building field catalog For quantity field Set the NO-ZERO attribute to 'X'.
Or you can change the quantity filed to character in the alv display.
Mark points if helpful.
Regards,
Umasankar

Is is possible to display quantity field in FBU3?

Hi,
Is it possible to display the quantity field in FBU3? We have activated the quantity field for FBL3N but not able to find the configuration to do it for FBU3.
Please guide.

Good Morning Everybody,
The above question still continues...
{Please Answer}

Error with quantity field:Datasource Creation Using Function Module method

Problem with DATASOURCE Creation using Function Module method :
I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
Let me know if my explanation is not clear enough.
Thanks in advance,
Neha.
Z table definition is as below :
MATNR MATNR CHAR 18 0 Material Number
BWKEY BWKEY CHAR 4 0 Valuation area
LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
STPRS STPRS CURR 11 2 Standard Price " Here the currency field is WAERS and table T001
PEINH PEINH DEC 5 0 Price Unit
VJSTP VJSTP CURR 11 2 Standard price in previous year
VJPEI VJPEI DEC 5 0 Price unit of previous year.
Edited by: Neha Rathi on Jan 30, 2009 3:03 PM

Hi,
You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
also if you want to populate it then you will have to write the code for this fields as well.
Thanks
Ajeet

Runtime error in Dynamic internal table with AMOUNT and Quantity Fields..

Dear friends,
I am attempting write a dymanic Select Statement (with joins).
And the sleect query looks like this..
SELECT (LT_SEL_LIST)
INTO CORRESPONDING FIELDS OF
TABLE <DYN_TABLE>
FROM (LT_FROM_LIST)
WHERE (LT_WHERE3).
Here the into table is a dynamically created internal table..
which is created by ...this
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = IT_OUTPUT2[]
    IMPORTING
      EP_TABLE        = DY_TABLE.
the it_output2 contains the the fieldcatlog information of dynamically given fields :-
like:-
       TABNAME
       FIELDNAME
       DATATYPE
       LENG
       INTTYPE
       ROLLNAME
       DECIMALS
       REFTABLE
       REFFIELD
i mean the internal table is constructed with reference to all the bove metadata.
Problem:- This query run fine with all the fields Except AMOUNT AND QUANTITY fields....
When the selection list contain VBAK-NETWR or MSEG-MENGE..It throws a runtime error.
"The data read during a SLECT access couldnt be inserted into the target field,either conversion is not supported for
the target field's type or the target field is too short."
after this I even tried to construct the dynamic table with CFILEDNAME and QFIELDNAME in the Fieldcatalog.
so now my fieldcatlog looks like this:---
LOOP AT IT_DD03L..
IF IT_DD03L-DATATYPE = 'CURR'.
       TABLEFIELD-CFIELDNAME = IT_DD03L-FIELDNAME .
       ENDIF.
   IF IT_FIELDCAT3-DATATYPE = 'QUAN'.
       TABLEFIELD-QFIELDNAME = IT_DD03L-FIELDNAME .
ENDIF.
       TABLEFIELD-TABNAME     = IT_DD03L-TABNAME.
       TABLEFIELD-FIELDNAME   = IT_DD03L-FIELDNAME.
       TABLEFIELD-DATATYPE    = IT_DD03L-DATATYPE.
       TABLEFIELD-INTLEN      = IT_DD03L-LENG.
       TABLEFIELD-INTTYPE     = IT_DD03L-INTTYPE .
       TABLEFIELD-ROLLNAME    = IT_DD03L-ROLLNAME.
       TABLEFIELD-DECIMALS    = IT_DD03L-DECIMALS.
       TABLEFIELD-REF_TABLE   = IT_DD03L-REFTABLE.
       TABLEFIELD-REF_FIELD   = IT_DD03L-REFFIELD.
APPEND TABLEFIELD.
CLEAR TABLEFIELD.
ENDLOOP.
Note:- this is a test code so ignore performance issues...
Please help me with some code ...to avoid the Runtime erorr.
Thanks,
jeevan.

Hi Jeevan,
Why are moving only few fields from DD03L table to your field catalog? Why don't you use move-corresponding? The following code works for me in ECC6.0.
data: it_dd03l type table of dd03l initial size 0,
      ls_dd03l type dd03l,
      lt_fldcat TYPE lvc_t_fcat,
      ls_fldcat TYPE lvc_s_fcat,
      ls_where(72) TYPE c,
      lt_where LIKE TABLE OF ls_where,
      lt_fld LIKE TABLE OF ls_where,
      lt_data_dy TYPE REF TO data.
field-symbols: <ft_data> TYPE STANDARD TABLE.
select * into table it_dd03l from dd03l
    where tabname = 'VBAK'
      and ( fieldname = 'VBELN' or fieldname = 'NETWR' ).
check sy-subrc eq 0.
loop at it_dd03l into ls_dd03l.
move-corresponding ls_dd03l to ls_fldcat.
append ls_fldcat to lt_fldcat.
move ls_dd03l-fieldname to ls_where.
append ls_where to lt_fld.
if ls_dd03l-fieldname = 'VBELN'.
    clear ls_where.
    concatenate ls_dd03l-fieldname ' <> ''''' into ls_where.
    append ls_where to lt_where.
endif.
endloop.
check not lt_fldcat is initial.
CALL METHOD cl_alv_table_create=>create_dynamic_table
      EXPORTING
        it_fieldcatalog           = lt_fldcat
      IMPORTING
        ep_table                  = lt_data_dy
      EXCEPTIONS
        generate_subpool_dir_full = 1
        OTHERS                    = 2.
    IF sy-subrc <> 0.
      RAISE no_configuration_data.
    ENDIF.
    ASSIGN lt_data_dy->* TO <ft_data>.
check sy-subrc eq 0.
select (lt_fld) from VBAK into corresponding fields of table
    <ft_data>
    where (lt_where).
Thanks
Bala

CO15 quantity field as uneditable

Similar Messages

Maybe you are looking for