Code 10 error - wireless adapter

For some reason, and all of a sudden, my Linksys WMP54G wireless card has the code 10 error - Device cannot start.
I've searched and searched, un-installed, re-installed, tried different PCI slots etc and was even on the live chat to a Linksys 'Technical' support person last night (what a waste of time). I have the latest drivers.
Can anyone point me in the direction of anything that'll help me rectify the error. I asume it's an IRQ problem. The card was working well for 3 or 4 days and prior to that it was working for a couple of years in my old set up.
Coincidently, although it may be connected, ATItool had problems at exactly the same time, but I've now un-installed that......................
Any help is appreciated!
D.

Hi,
I just 'GOOGLED' code 10 error and all seems sorted for you------so----away you go. Hope this helps. Just reassign the resourse i think.
Regards Jabiru

Similar Messages

Upgrade my DV6-6126sl with an Wireless adapter Bluetooth

Hi,
I open a new topic, because searching among existing ones, I did not find useful answers.
I have a DV6-6126sl and I decided to upgrade it with a wireless card that implements the Bluetooth. analyzing the service and maintenance guide, I chose to buy the part number 657325-001, which should be compatible with both AMD and those models intel, but when I insert the card at startup hangs and does not post bios, giving an error "wireless adapter installed is not supported and then has the error" wireless (702) "," how is it possible? there is a method to unlock it, thanks
Knowledge is power, sharing knowledge is powerful!
HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

Today, the seller has sent to me an email that says: "I have the Ralink RT3090BC4 802.11b/g/n 1 × 1 WiFi and Bluetooth 2.1 + EDR Combo Adapter 630705-001".
According to you, since the manual is listed as "For use on all computer models:" can I try?
Knowledge is power, sharing knowledge is powerful!
HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

Code 10 error for 'Broadcom BCM43142 802.11 bgn Wi-Fi Adapter'.

Last week, i tried setting up hotspot manually using CMD window. But it failed and the system stopped detecting wifi altogether. i tried installing the driver 'Broadcom BCM43142 802.11 bgn Wi-Fi Adapter' but it shows up 'code 10' error after installing it. Please suggest suitable measures to restore wifi connections.

Hi: See if this works... Download but don't run this driver... The package contains Broadcom Wireless LAN driver. It is required to enable integrated Broadcom Wireless LAN adapter. File name: sp68301.exe Go to the device manager, right click on the problem Broadcom wireless adapter. Select Uninstall and check the Uninstall Driver box. Reboot and see if installing the driver I posted above installs the device properly.

Wireless Adapter Error 10 when CSM Support Disabled

After a motherboard replacement, my Thinkpad Yoga was returned with CSM Support enabled, causing a legacy bios and windows splash screen to appear.
I went into the bios and disabled CSM support to bring back the default black Lenovo boot up screen, but now when windows loads the Wireless Card reports an Error Code 10. I have tried updating to every driver and even refreshed windows to no avail.

I later disabled Broadcom Virtual Wireless Adapter and found that I could still use WiFi so I went on and upgraded to Windows 10 anyway. Broadcom Virtual Wireless Adapter does come off the list on Device Manger but I can still use WiFi regardless.

Disabling Wireless Adapter

I want to run a Powershell Startup Script to disable the Wireless adapters on some systems. I thought I'd want to get some WMI stuff
Get-WmiObject -Class Win32_NetworkAdapter -Filter "Name = 'Intel(R) Centrino(R) Advanced-N 6205'
Then run netsh to disable it
netsh interface set interface "Wireless Network Connection" DISABLED
After looking at this I wondered why not just run the
netsh interface set interface "Wireless Network Connection" DISABLED
I don't really need the Get-WmiObject do I?
Orange County District Attorney

Here are a couple of scripts ( ps and vbscript ) that can be used on a dell bios.. You could adapt it to disable the wireless adapter in the bios if you want ..
( pcombobox app is on www.justcode.ca )
Powershell ( may require dell client management agent )
(gwmi DCIM_BIOSService -namespace root\dcim\sysman).SetBIOSAttributes($null,$null,"Wake On LAN","4")
Possible values are:
1 - Disable
2 - Add-in
3 - On board
4 - LAN
5 - PXE boot enable
6 - LAN or WLAN
7 - WLAN only
vbscript
' Set Dell Bios items
' Requires that the Dell Client Management software is installed
'Dell DCIM values
' Wake on LAN values
'Enables or Disables Multiple CPU Core support on next boot.
'Possible values are:
'1 = Other
'2 = Unsupported
'3 = Enabled
'4 = Disabled
'The actual values are not the above, but the below - Paul Jorgensen - Nov 2011 ( Dell gx760 )
'1 = Disabled
'2 = Enabled
'AC Power Recovery Mode
'1 = ?
'2 = ?
'Processor Logical Processor(HyperThreading)
'1 = ?
'2 = ?
Option Explicit
'*** Declare variables
Dim strNameSpace
Dim strComputerName
Dim strClassName
Dim strKeyValue
Dim objWMIService
Dim ColSystem
Dim objInstance
Dim oInParams
Dim returnValue
Dim strAttributeName(2)
Dim strAttributeValue(2)
Dim strAuthorizationToken
Dim psDellBios
Dim WshShell, objWshScriptExec
Dim psAttribute
Dim psValue
Dim pbAttributeFound
Set WshShell = WScript.CreateObject("WScript.Shell")
'*** Check that the right executable was used to run the script
'*** and that all parameters were passed
If (LCase(Right(WScript.FullName, 11)) = "wscript.exe" ) Or _
(WScript.Arguments.Count < 1) Then
Call Usage()
WScript.Quit
End If
'*** request combobox input as to which bios setting should be updated
psDellBios = GetComboInput("pcombobox.exe /p:WakeOnLAN,EnableDualCPU")
WScript.Echo("This is setting ->" & psDellBios)
'*** Initialize variables
strNameSpace = "root\dcim\sysman"
strComputerName = WScript.Arguments(0)
strClassName = "DCIM_BIOSEnumeration"
'*** Set Variables based on combobox selection
If psDellBios = "WakeOnLAN" Then
psAttribute = "Wake On LAN"
psValue = "4"
End If
If psDellBios = "EnableDualCPU" Then
psAttribute = "Multiple CPU Cores"
psValue = "1" ' see value notes at top of script
End If
'*** Retrieve the instance of DCIM_BIOSEnumeration class for the TPM
Set objInstance = GetObject("WinMgmts:{impersonationLevel=impersonate," &_
"AuthenticationLevel=pktprivacy}\\" & strComputerName & "\" &_
strNameSpace)
'*** print out attribute if found
Set ColSystem = objInstance.execquery("Select * from " & strClassName)
For Each objInstance In ColSystem
'*** Check every instance
'iTKVal = objInstance.Properties_.Item("CurrentValue").Value(0)
'*** Auto On Hour and Auto On Minutes don't have PossibleValues and PossibleValuesDescription properties
If (objInstance.AttributeName = psAttribute) Then
WScript.Echo("Specified Attribute found " & objInstance.AttributeName & ", " & ( objInstance.CurrentValue(0) ) & VbCrLf )
pbAttributeFound = True
End If
Next
strClassName = "DCIM_BIOSService"
strAttributeName(0) = psAttribute ' Wake on LAn or Multi Core CPU, see psAttribute in query section above
WScript.Echo("strAttributeName-> " & strAttributeName(0))
strAttributeValue(0) = psValue
WScript.Echo("strValue-> " & strAttributeValue(0))
strAuthorizationToken = ""
'*** Retrieve the instance of DCIM_BIOSService class
Set objWMIService = GetObject("WinMgmts:{impersonationLevel=impersonate," &_
"AuthenticationLevel=pktprivacy}\\" & strComputerName & "\" &_
strNameSpace )
Set ColSystem=objWMIService.execquery ("Select * from " & strClassName)
For Each objInstance In ColSystem
Set oInParams = objInstance.Methods_("SetBIOSAttributes").InParameters.SpawnInstance_
oInParams.AttributeName = strAttributeName
oInParams.AttributeValue = strAttributeValue
oInParams.AuthorizationToken = strAuthorizationToken
Set returnValue = objInstance.ExecMethod_("SetBIOSAttributes", oInParams)
Exit For
Next
'End If
'*** If any errors occurred, let the user know
If Err.Number <> 0 Then
WScript.Echo "Enabling Wake On LAN failed."
End If
'*** Sub used to display the correct usage of the script
Sub Usage()
Dim strMessage
strMessage = "incorrect syntax. You should run: " & vbCRLF & _
"cscript.exe /nologo SampleWakeOnLAN.vbs <systemname>"
WScript.Echo strMessage
End Sub
Function GetComboInput(cbparam)
Dim sTempPath, sTempResult, sTempExitCode
sTempPath = cbparam
WScript.Echo sTempPath
Err.Clear
'WshShell.run sTempPath, WINDOWNORMAL, True
Set objWshScriptExec = WshShell.Exec(sTempPath)
' ***** BELOW - ** USE RegRead to read reg return value **** !!!!
'wscript.Echo WshShell.RegRead(testregpath)
'WScript.Echo Err.Number
Do While objWshScriptExec.Status = 0
WScript.Sleep 100
'WScript.Echo "this is the status code" & objWshScriptExec.Status
Loop
'**** if item was not picked from combobox, take action based on errorlevel
sTempExitCode = objWshScriptExec.ExitCode
If (objWshScriptExec.ExitCode = 0 Or objWshScriptExec.ExitCode = 100 Or objWshScriptExec.ExitCode = 102 Or objWshScriptExec.ExitCode = 101) Then
'If(objWshScriptExec.ExitCode > 20 )Then
Select Case sTempExitCode
Case 0
WScript.Echo "User clicked cancel"
WScript.Quit(0)
Exit Function
Case 100
WScript.Echo "User clicked return abort"
WScript.Quit(100)
Exit Function
Case 101
WScript.Echo "User clicked ok with NULL item"
WScript.Quit(101)
Exit Function
Case 102
WScript.Echo "User clicked ok with data entry"
'WScript.Echo " result is " &
GetComboInput = WshShell.RegRead("HKCU\Software\Green-Frog-Software\pComboBox\RData\PComboBox")
WScript.Echo " GetComboInput is " & GetComboInput
Exit Function
Case Else
End Select
End If
'WScript.Echo objWshScriptExec.ExitCode
'**** return the error value
'*****ACTUALLY - parse "cbparam" using the exitcode to return the
'***** the string required rather then run another function
'***** or run a generic function from here...
'***** this will make the function single line usage
'***** which is way more script friendly
sTempResult = pfParseResult(cbparam, objWshScriptExec.ExitCode)
'WScript.Echo sTempResult
GetComboInput = sTempResult
End Function
' ** Application: VB MapDrives
' ** Function: pfParseResult
' ** Purpose: match the errorlevel returned to the input string desired
' ** Update:
' ** Date: Jan 6 2009
' ** Author: Paul Jorgensen
Function pfParseResult(cbparam, pi_Result)
Dim sTempPath, sSplitFirst, piLen
Dim paParseArray
sTempPath = cbparam
'WScript.Echo sTempPath
Err.Clear
piLen = Len(cbparam)
If (piLen > 17) Then
sSplitFirst = Right(cbparam, piLen - 17) ' 17 = 3 for /p: and 14 for pcombobox.exe with spaces
End If
'WScript.Echo "this is sSplitFirst" & sSplitFirst
paParseArray = Split(sSplitFirst, ",", -1, 0) ' string, delimiter, count -1 = all, binary(0) or text (1)
'WScript.echo CrLf
'WScript.echo paParseArray(0)
'WScript.echo CrLf
'WScript.echo paParseArray(1)
' ie a valid selection was returned from GetComboInput, so use the return code ( pi_Result) which represents the item
' selected to select the item from the paParseArray which is the cbparam parameter minus the exe and the /p: with
' the /p: parameters split into the paParseArray ( ie D,L,R,S,V.... )
pfParseResult = paParseArray(pi_Result - 1)
'Do While objWshScriptExec.Status =0
'WScript.Sleep 100
'WScript.Echo "this is the status code" & objWshScriptExec.Status
'Loop
End Function
just code, no beer...although that would probably help..

[T400] Cisco VPN client not working over wireless adapter (but works on cabled connection)

I have a very strange problem.
I need to connect to my work via the cisco vpn client (version 5.0.00.0340).
My previous laptop (T43 , windows XP) worked well through both wired / wireless connections. My desktop machine (vista) works via wired connection (it has no wireless connection).
On my new T400, the VPN client works via a wired connection but not via the wireless adapter.
On the wireless apapter, the vpn seems to connect OK, but when I try to access resources via the VPN there is little response.
I get this in the vpn log...
405 08:56:57.073 04/16/09 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xa4510009 (IPSecDrvCB:846)
I've tried disabling the firewall (in both the T400 and the router), removed access connections, and disabling tcp v6. I've rebooted everything too.
But, nothing seems to work. I suspect the problem is on the t400 somewhere, because the old laptop used to work OK via wireless.
I've seen some google links on cisco vpn not working via wireless but nothing seems to apply to my exact situation yet.
Anyone else had this problem or know of a fix? Thanks in advance.
Solved!
Go to Solution.

all good now, got it working.
The Deterministic network thing was not installed on the wireless adapter for some reason.
So, I installed the latest wireless driver, reinstalled the vpn and all is good now.

Wireless adapter not showing any available networks

I've recently discovered that my Intel Centrino Advanced-N 6235 wireless adapter in my Asus Zenbook UX32VD running Windows 7 64 bit is not working as it won't show any available networks while my phone can find plenty in the same area.
So far I've:
-Re-installed the driver. Before I did this the adapter wouldn't even show when trying to change adapter settings. When I looked at the adapter in device manager I found an error code 52 which disappeared after I re-installed the driver.
-Re-installed the client for windows networks installed for the adapter which did not make a difference.
-Temporarily turned off my AVG-free anti-virus which did not make a difference.
When looking at the adapter after clicking change adapter settings in the networks and sharing center it says it's not connected, but as stated above it doesn't show any networks to connect to.
Also, when I try to use the networks diagnostics tool I get the following error message:
Windows cannot find
'::{26EE0668-A00A-44D7-9371-BEB06...\resultPage?keywords=+Network;NetworkDiagnostics'.
Make sure you typed the name correctly, and the try again.
Any possibly solutions I've not already tried are welcome. Thanks in advance for any help.

Hi,
Locate to Services and check all services relating to wireless and network are enabled: Wireless Zero Configuration and WLAN AutoConfig, etc.
Also, make sure your NIC is working correctly from device manager.
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=108496d0924847afaf9c4a7bb72110b5_5646.xml&pid=80&converted=0
Have you tried manually connecting to wireless?
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=8fd9ee85a0bf42f0986ed23390be8c66_19850.xml
Andy Altmann
TechNet Community Support

Code 10 error for touchscreen using windows 8

We have a HP 42" monitor (LD4200tm) and the touchscreen feature does not work and we have a code 10 error - device not working. The panel works fine using Windows 7 and the drivers appear to be the most updated.

Hi: See if this works... Download but don't run this driver... The package contains Broadcom Wireless LAN driver. It is required to enable integrated Broadcom Wireless LAN adapter. File name: sp68301.exe Go to the device manager, right click on the problem Broadcom wireless adapter. Select Uninstall and check the Uninstall Driver box. Reboot and see if installing the driver I posted above installs the device properly.

2g Shuffle crashes wireless adapter

Hello,
I'm a dell machine with windows xp and whenever I plug in my new 2g shuffle I get an error message saying windows does not recognize my device and then it crashes my wireless internet connection. I am using a Linksys wireless adapter on my home machine. I moved my machine and hard wired and the shuffle worked like what you expect from all Apple products! I moved it back and reconnected to wireless plugged in the shuffle, same error message, wireless does not work and shuffle is not recognized by windows or itunes.
Any ideas?
Dell Windows XP
Dell Windows XP 1g shuffle, 2g shuffle, 1g mini, 2 5g 60 gig video

After looking at another post I decided to try a powered usb hub, the shuffle works fine, no problems at all with any other devices using the usb ports. The shuffle works like it should, I just don't understand why that makes a difference, do I have a defective shuffle, is it using too much power from the usb port, should I exchange it?
Windows XP

Wireless adapter causing blue screen

Hello,About a month ago on my Lenovo Ideapad Z580, I was using the internet when it said I was no longer connected. When I tried troubleshooting, it reset the wireless connection adapter and gave me a blue screen. When it restarted and I tried troubleshootingt it again, it enabled the adapter and worked fine. Since that first time, this BSOD has happened every day, sometimes multiple times a day, but not everytime I am on the internet. I have tried doing a system restore at a few different points, but the restore always ends in an error. I checked at the driver for the wireless adapter is up to date. Please advise on what I can do to fix this problem. Thank you,Stephanie

The symptoms you describe could be symptomatic of a variety of things to include hardware/software issues, overheating caused by a failed processor fan, bad memory (RAM), failing or underpowered power supply, CPU overheating, motherboard, video card, faulty or unsigned device drivers, CMOS battery going bad, BIOS and firmware problems, dirty hardware components, programs hanging or unresponsive in the background, and even malware. If the computer is overheating, it usually begins to shutdown/restart on a more regular basis.
If the machine is only crashing at home after establishing a connection but not at work when establishing a connection, then its probably an issue with your network configuration or something (i.e. wireless adapter) causing a conflict and not a malware issue.
The DRIVER_IRQL_NOT_LESS_OR_EQUAL error is usually due to a bad driver or faulty/incompatible hardware or software. This error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel Interrupt ReQuest Level (IRQL) that was too high.

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

CLIENT_SEND_FAILED error code: 500, error text: Internal Server Error

Hi,
Developed Proxy <-->PI<-->JDBC SELECT scenario and getting the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
When I cross checked the JDBC Receiver communication channel in Runtime Work Bench
request and response were successfull. RWB shows the following message.
2009-06-12 09:34:50 Information The message was successfully received by the messaging system.
2009-06-12 09:34:50 Information Message successfully put into the queue.
2009-06-12 09:34:50 Information The message was successfully retrieved from the request queue.
2009-06-12 09:34:50 Information The message status was set to DLNG.
2009-06-12 09:34:50 Information Delivering to channel: DB2ReceiverTableSPT
2009-06-12 09:34:50 Information JDBC Adapter Receiver processing started, required QoS BestEffort
2009-06-12 09:34:50 Information JDBC Adapter Receiver Channel DB2ReceiverTableSPT:
2009-06-12 09:36:35 Information Database request processed successfully.
2009-06-12 09:36:35 Information The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2009-06-12 09:36:35 Information The message status was set to DLVD.
I had gone thru all the previous threads related to 'CLIENT_SEND_FAILED' but
those did not solve my problem.
Can some one help me to solve this issue.
Thanks,
Vijay.

I made necessary changes as per the blog. Appended '_response' for JDBC response structure.
Still I am facing same problem.
Strange....delibarately gave the link so that you can cross-check the JDBC config on receiver side...I assume that the proxy is configured properly with the Sync communication....also mapping is done accordingly...
Regards,
Abhishek.

Having Trouble Connecting To Xbox Live using my router and wireless adapter.

Okay, so this is kinda long but I'll try and speed through. Recently I moved from my old place to a newer place (larger) and before, my old spot worked perfectly, no troubles. Now, eversince i got my internet cable service re-hooked up I've had problems. My internet is fine, that's not the problem. It's my xbox live for my 360. My cable guy pretty much set up my living room with the main router and not my studio office which I keep my 360 in. Instead he told me it would be much easier to just go out and buy a wireless adapter for my PC to recieve the signal from my living room off the main family computer. Well, went out and bought a $80.00 wireless adapter top of the line and it works perfectly, I get the internet really fast. Problem is, my 360 will not connect now. It always says DNS failed. Well here's the problem. I have a Linksys router in my studio office that sits on top of my PC that i have connected to the ethernet of my PC, then in the 2nd or 1st port i have my 360ethernet wire connected to my xbox360. Still it says DNS failed. Shouldn't my router be getting the signal from my Wireless adapter that it's receiving from the living room? It's connected through the same computer yet it doesnt connect. It finds my I address, and it finds the network adapter yet it always fails my DNS. I've tried evern switching the xbox360 ethernet to the main ethernet port on my pc and that just makes me fail the IP address test. I need help guys. My wireless adapter for the pc is a Belkin but my router is a linksys and not sure if the 360 just doesnt recognize it or not. Is there settings I'm missing or something? Please help!!!
The Burninator...

On your 360 if u getting an error msg DNS failed,you can login to your router setup page and go to status tab, not the Static DNS1 and DNS2 numbers and u can give a static dns to your 360. its will resolve ur issue.

Received HTTP response code 500 : Error during conversion of XI message

hi
Facing the error , "Received HTTP response code 500 : Error during conversion of XI message"
This is the fist time i am configuring the sender soap ( Axis Framework in the SOAP Adapter) (Quality of service Best effort) communication channel and i am getting the above error did any body face this error.
01.09.2011 12:02:32     Information     The message status was set to DLNG.
01.09.2011 12:02:32     Error     SOAPFault received from Integration Server. ErrorCode/Category: XIServer/ATTRIBUTE_INITIAL; Params: Manifest cid:6D90482BF678436D75928FC8B9930519; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Attribute Manifest cid:6D90482BF678436D75928FC8B9930519 is initial
01.09.2011 12:02:32     Error     Transmitting the message using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during conversion of XI message.
regards
sandeep
Edited by: pendyalas on Sep 1, 2011 12:20 PM

I found a link with respect to similar error , sap note 1522630 has been used to resolve this error.
i will try and see if it works.
AXIS Sender Adapter Failure after upgrade to PI 7.11 SP06
regards
sandeep

HTTP response code 500 : Error during parsing of SOAP header

Hi Experts,
I have a MAIL to IDOC scenario. An external third party emails invoices to our inbox - which we pick up and process the attachment. All is well when I test the scenario internally, but when the third party emails it fails with (see ERROR MESSAGE below).
When I look at the SOAP header of the failed message I see the values from the dump in this field:
<sap:Record namespace="http://sap.com/xi/XI/System/Mail" name="SHeaderTHREAD-INDEX">AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=</sap:Record>
Can anyone tell me what SHeaderTHREAD-INDEX does? Or what my problem is (Our email is Outlook)
ERROR MESSAGE.........
SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/WRONG_VALUE; Params: SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14), AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=協彎䅍䔾ਉ़䥎噏䥃䕟乏㸸㌱ㄵㄹ㰯䥎噏䥃䕟乏㸊उ㱁䵏啎呟䕘䍌彖䅔㸷⸵〼⽁䵏啎呟䕘䍌彖䅔㸊उ㱃啒剅乃失㹅啒㰯䍕剒䕎䍙ㄾਉ़䅍何乔彖䅔㸱⸴㜼⽁ꯃ䅢坡汫, ST: ST_XM; AdditionalText: An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC; ApplicationFaultMessage: ; ErrorStack: XML tag SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14) (or one of the attributes) has the incorrect value AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQ An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC Data loss occurred when converting AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1p
Transmitting the message to endpoint http://sdcxp1-ci.na.fmo.com:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during parsing of SOAP header.

We work with Microsoft Outlook, but I'm sure this could work with any email system.
This error only came from external emails - what we did in the end is to get the third party to email a particular email (email1) in our company. This is set up as a regular email account. On this email put a forward rule to email2 for a particular sender/subject. email2 is set up as POP3 so that XD1 can poll it - we also block any emails except from email1.
Doing this accomplishes a couple of things:
1) We get around the error because XI polls email2 (which has adapter settings of IMAP4 so we can see MAIL adapter attributes ie. sender, subject etc...When we originally had as POP3 we were not able to see these - but setting as IMAP4 causes the error for external emailers)
2) We have a SPAM filter - the XI email is clean from SPAM and the adapter will not have errors, as it only receives valid emails to process
3) We have a central email (email1) which is used to archive all XI emails - we use this for all email scenarios (as we also save to folder and forward in the rule)
Hope this helps your situation.

Code 10 error - wireless adapter

Similar Messages

Maybe you are looking for