Code changes are not effected in SWF(GUI)

Hi,
I have made changes in the code and compiled it and executed
the application.
But, the changes whatever I made are not shown in GUI part. I
am able to view the changes if I execute my application in debug
mode but not in normal mode. Even I have reinstalled my Flex plugin
in to Eclipse, that also not working.
Expecting your valuable solution for my problem.
-Sreedhar

Run "Clean" command at FB2 from "Project" menu

Similar Messages

Code changes are not effected in .swf file

Hi,
I have made changes in the code and compiled it and executed
the application.
But, the changes whatever I made are not shown in GUI part. I
am able to view the changes if I execute my application in debug
mode but not in normal mode. Even I have reinstalled my Flex plugin
in to Eclipse, that also not working.
Expecting your valuable solution for my problem.
-Sreedhar

Run "Clean" command at FB2 from "Project" menu

Code changes are not reflected in .swf file

Hi,
I have made changes in the code and compiled it and executed
the application.
But, the changes whatever I made are not shown in GUI part. I
am able to view the changes if I execute my application in debug
mode but not in normal mode. Even I have reinstalled my Flex plugin
in to Eclipse, that also not working.
Expecting your valuable solution for my problem.
-Sreedhar

Oh, I'm facing that problem almost constantly. I'm even
thinking to automate that process :)
One solution that I use in HTML pages is that I specify some
dummy random number. Say your SWF is called, my.swf. Then you could
try to specify a name like my.swf?rnd=4857845 and so on.
George

Code changes are not reflecting

Hi,
I am facing one strange issue.
One of my colleague developer made some code changes. He checkin the code and was transported successfully to quality system. The changes are working fine in quality system.
Now using my NWDS I synced the code by connecting to NWDI. When I build and deployed the code in my local server I am not able to see the all the code changes in my system. I am able to see some label changes but not all the code changes.
I checked the deployment of my local server by keeping some print statements and it is fine.
I removed the entire configuration from Development Configurations perspective and imported the configuration, created the project again. But still I am facing the same issue.
Can anyone help me in resolving this issue.
Regards
MQ

Hello MQ,
That is weired..Can you check in C:/USR/... where your JSP's and Java classes gets deployed. See if you get the changes deployed at this location you are looking for. You need to decompile your class file to Java file to see the content of it. If you still have issues , remove all the DC's from your NWDS, import again from the track , undeploy your EAR from SDM, and deploy it again.
But some other functionalities which are coming in my system are not coming in that system. Did you deploy to any server? If so, are you seeing all your changes on the server. Check you are connecting to right NWDI and to the right track.
I am sure you might have tried all these options..but nothing is striking to my mind at this time.
Thanks,
Raj

OIA rbacx/WEB-INF files' changes are not effecting

Hi All,
We have deployed OIA 11.1.1.5.0 in weblogic 10.3.5 (as folder deployment) , on top of managed server "oia_server1".
when ever, we changes any config files in rbax/WEB-INF folder, thats not effecting immediatly (after restart also, its not effecting). Its effecting, after redeploy the war again.
We have deployed war as "folder deployment method" (selected war as folder), in our previous env, it was effected immdiatly (with out restart). In our new deploy, we have created "managed sevrer" and deployed on top of managed server and its not effecting immediately, when we change any files in rbacx/WEB-INF folder.
Please suggest me.
Thanks.

It happened to me as well :(
The deployment gets effected only if you re-deploy the war file or click on Update (if you are using Weblogic).
The managed server takes the cache folders of deployment even after the re-start. The only difference and way to perform is to update the application in the deployments section, which does not even require a restart of the server.
Krish.

Problem in building and changes are not reflecting

Hi Team,
When I am building my DC, It is building without any errors,
But it is not showing anything like build failed yes or no.
I feel Its not building my DC,bcoz in tasks its not showing my DC name.
When I deploy, It is deploying without any errors, but my changes are not effecting.
What could be the problem ?
Thanks in advance.
Regards,
Naresh

Hi Ayyapparaj,
Thank you very much for your reply.
I have reverted the activity i have created for the DC, and deleted the activity.
I have deleted that DC from my NWDS also.
Now I have created the project again, with new activity.
And made the changes, build and deploy.
But still the changes are not effected.
When I build my DC, It is not showing any errors in tasks,
but My DC name is not there in tasks.
I feel my Dc is not building at all.
If some other user is created any activity on same DC but not checked in, then will create this kind of problem ??
I am not sure , where it is going wrong?
Its not showing like build failed---NO.
Its not showing any errors also.
Build is happening within 2 seconds.
Can you please sort it out..??
Thanks in advance.
Regards,
Naresh

BADI Changes are not taking effect

Hi,
I have done few changes at BADI...but those changes are not taking effect...
I activated everything...wat might b the problem?
Regards,
venkat
Moderator message: too vague, help not possible, please describe problems in all technical detail if posting again.
Edited by: Thomas Zloch on Feb 23, 2011 3:02 PM

Yes, Actually after looking into the problem some more it looks like the
changes are taking effect. The only problem that we are having is that
the start bar does not appear when the user log in and no drives are
showing up under windows explorer. I checked the policy and we did not
configure the section under windows explorer so i am not sure why the
drives are not showing. Also I am not sure why the start bar does not
appear.
Dan

Why changes are not visible in alternate profit center heirarchy?

Hi
I did changes in the master data of profit center. I chaged the profit center group in the masterdata of profit center & the same change is visible in the standard heirachy but the changes are not visible in the alternative heirarchy.
I think it should visible as I did changes in the master data.
I just want to know why it is like so or there is some other way to change the master data.
I know i can drag the profit center as well in t code KCH9 or KCH 2.
After doing so i activated the same.
Waiting for sugestions, comments.
Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
Edited by: Smruti Mohanty on Nov 13, 2008 2:03 PM
Edited by: Smruti Mohanty on Nov 13, 2008 3:02 PM

Hi,
If your are using same profit center group(which is used in standard hierarchy) in alternate hierarchy,you will see change.
if your using different groups in Standard hierarchy and Alternate hierarchy you will not see change in alternate hierarchy.
hope this helps you.
Thanks,
Rau

Changes are not reflecting when de-implemented the SNOTE.

Hi All,
I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was got appended due to implementations of note , now it is not getting removed.
kindly help me out.....

Hi All,
I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was got appended due to implementations of note , now it is not getting removed.
kindly help me out.....

Changes are not reflected in ODS

Hi all
Can anyone help me with this!!!!!!!!
There is an ODS1 which gets data from transparent table. From ODS2 data is loaded into transparent table. Then the data is deleted from ODS1 and ODS2.
Again the data is reloaded into ODS2 and then into ODS1.
The changes are reflected in the ODS2 and changes are not reflected in ODS1
Even after refreshing also changes are not reflected in the ODS1.
what could be done??????
Thanks
Rani

Hi rani,
U need to check whether the changes are reflected in the transparent table once you reload it from DSO2.
The reason might be, the key of the table might be different hence it might be adding records instead of overwriting or updating it. If there is any code used, check the logic whether u are appending or modifying the contents of the table. generally it should be modifying the contents.
Hope this help
Regds,
Shashank

Trigger changes are not committing to the database

I have 9iAS and 9i DB both on my laptop.
I am having a problem in which a trigger run off a WHEN_BUTTON_PRESSED function is not committing the changes to the database. In the trigger I have:
1 record insert into table A.
1 record update to table B.
1 record insert into table C.
1 delete from table D.
None of the data is related.
I have tried various combinations of the below to get the changes to commit:
POST;
COMMIT_FORM;
Exit_Form(NO_COMMIT, NO_ROLLBACK);
MESSAGE('Got past COMMIT');
COMMIT;
CLEAR_FORM(NO_COMMIT);
ENTER_QUERY;
I am getting varying amounts of "FRM: 40508 Oracle Error: Unable to INSERT record" statements. Even so, many times the form would act as if the changes had been properly applied. But when I did a separate DB verification, I would see that the changes are not being committed. Also, most of the time the changes would also be reflected in the calling form queries, but when I exit, all changes are rolled back no matter how many commit stmts are in the trigger.
I have finally gotten the form to do what I want to do (the 4 steps noted above), but I had to add a FORMS_DDL('COMMIT'); stmt and I am still getting a FRM 40508, but at least the changes are appearing in the db.
Any ideas on why so many troubles in getting the changes to commit??? I have spent a ton of hours trying "what ifs" to see what might work. Also, this trigger is the only real "code" in the forms.
Kim

Brett -
You're probably right about the intention, but this is a place where people can come and share styles, ideas, and coding tricks, I don't understand why someone would say that. Additionally, I had a professor who was a complete momo that said that all the time (consequently, his lax attitude towards teaching crippled the IS program where I graduated and most likely will cause it to no longer be available). It's a personal peeve of mine, just to let you know where I was coming from.
Secondly, the problem I'm having may have to do with what you said, however I can't be sure. To give a better description of my scenerio, I created a form that allows the user to load information about an employee by querying a SSN. Most of this information is for display only. Six fields are available to be updated and I wrote a DML UPDATE statement that I placed inside a WHEN-BUTTON-PRESSED trigger. However, these changes won't be written to the DB because Forms is attempting to write my entire datablock, instead of just following the specified DML statements. I'm at a loss as to why this would happen, but for simplicity's sake, I would listen to ideas of how to suppress this from happening so only my statements are used when updating the DB. If you can help, thank you, if not, then thank you for your time.
Steve

After transporting changes are not happening

Hi All,
As per the requirement we need a change in the pricing procedure ZJEXPS
(Export Sales Switch). We made the changes in transaction code V/08.
But after transporting the request to quality server, changes are not reflecting there.
I had checked the request number all the tasks are there and transport was completed with warning.
our consultant created another request and then also after transporting changes are not reflecting.
How it is happening particular to this request?
How to trace this? Kindly suggest me.
(Ours is two system landscape with master client 009 and quality client 007.I am trying to transport to 007)
Regards,
Nagendra.

Hi
Check the import logs. If you are getting warnings that original objects cannot be replaced. You need to import the change request in unconditional mode. During performing imports select option, overwrite originals.
Some times the requests contain the objects, which are original to the target system, e.g SAP standard objects.
Check if this could help you.
Regards
Rahul

Component binding - changes are not reflected

Dear all,
When using JSF method binding I'm experiencing the following strange behavior.
Within the view, I'm registering a panel by method binding expression, which I then use within the controller bean to add additional UIComponents on it. However when running through "addTestToDEBUG()", the existing Panel is retrieved properly via the getViewRoot's children, the new HtmlOutputText is created and added upon - also when I call getComponent on the newly created HtmlOutputText's userID I get the UIComponent returned.
However after the addTestToDEBUG() method has finished and the view is updated, the "setComponentPanelDEBUG(UIComponent panel)" is called, but panel (where we have added child UIComponents upon, does not contain the HtmlOutputText element!
Where's my conceptional error? Thanks for your help!
Please find attached my sample code:
here's my view:
<h:form id="formXmlDebugTemplate">
     <p><h:outputText value="Debugging:"/></p>
     <h:panelGroup id="panelDEBUG" binding="#{RegisterTBServiceBean.componentPanelDEBUG}">               </h:panelGroup>
     <br/>
      <h:commandButton id="buttonDEBUG" value="Add Element" action="#{RegisterTBServiceBean.command_addDEBUGITEM}"/>
</h:form>here's the bean:
private UIComponent debug = new UIPanel();
public UIComponent getComponentPanelDEBUG(){
     return this.debug;
public void setComponentPanelDEBUG(UIComponent panel){
     this.debug = panel;
}here's the controller
public void addTestToDEBUG(){
     UIComponent panel = (UIComponent)getComponent("formXmlDebugTemplate:panelDEBUG");
     String sRandom = ((int)((java.lang.Math.random()*100)))+"";
     facesContext = FacesContext.getCurrentInstance();
     HtmlOutputText outputText = (HtmlOutputText) facesContext.getApplication().createComponent(HtmlOutputText.COMPONENT_TYPE);
     outputText.setValue("Test"+sRandom);
     outputText.setId("xmlDEBUGOutputText"+sRandom);
     panel.getChildren().add(outputText);
private UIComponent getComponent(String sID){
     facesContext = FacesContext.getCurrentInstance();
     Iterator<UIComponentBase> it = facesContext.getViewRoot().getChildren().iterator();
     UIComponent returnComp = null;
     while(it.hasNext()){
          UIComponent guiComponent = it.next().findComponent(sID);
          if(guiComponent!=null){
               returnComp = guiComponent;
     return returnComp;
}

Dear all, thanks for your help - we've finally found what was causing the problems:
So the behaviour was that actually all "method bound" UIComponents were updated within the bean, but the changes were not reflected within the gui.
Well *<redirect>* within the faces-config was causing the problems
Redirect foces a HTTP redirect instead of using the usual ViewHandler mechanism to take place.
kr A.

New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

Hi,
I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
I have referred the following links:
http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
this scheduler on development environment changes are getting reflected but not working on the production environment.
Kindly help!
Regards, Shruti

You should check the obvious. You made the change in dev, but did you make the change in production too? And, is the term you updated, actually the one that you are looking at in the list item?
There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process. In this case, you should check the ULS logs for any errors.
Chris
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Code changes are not effected in SWF(GUI)

Similar Messages

Maybe you are looking for