Code changes are not effected in .swf file

Hi,
I have made changes in the code and compiled it and executed
the application.
But, the changes whatever I made are not shown in GUI part. I
am able to view the changes if I execute my application in debug
mode but not in normal mode. Even I have reinstalled my Flex plugin
in to Eclipse, that also not working.
Expecting your valuable solution for my problem.
-Sreedhar

Run "Clean" command at FB2 from "Project" menu

Similar Messages

Code changes are not reflected in .swf file

Hi,
I have made changes in the code and compiled it and executed
the application.
But, the changes whatever I made are not shown in GUI part. I
am able to view the changes if I execute my application in debug
mode but not in normal mode. Even I have reinstalled my Flex plugin
in to Eclipse, that also not working.
Expecting your valuable solution for my problem.
-Sreedhar

Oh, I'm facing that problem almost constantly. I'm even
thinking to automate that process :)
One solution that I use in HTML pages is that I specify some
dummy random number. Say your SWF is called, my.swf. Then you could
try to specify a name like my.swf?rnd=4857845 and so on.
George

Code changes are not effected in SWF(GUI)

Hi,
I have made changes in the code and compiled it and executed
the application.
But, the changes whatever I made are not shown in GUI part. I
am able to view the changes if I execute my application in debug
mode but not in normal mode. Even I have reinstalled my Flex plugin
in to Eclipse, that also not working.
Expecting your valuable solution for my problem.
-Sreedhar

Run "Clean" command at FB2 from "Project" menu

Performance Point: Code blocks are not allowed in this file.

Hi All,
I'm trying to use Performance Point 2010 in Sharepoint 2010...
I have start the application in centrel admin
I have created a site collection based on the Bisuness Intelligence Center template
I can surf the new Site Collection but when I try to open the "Start using PerformancePoint Services" link I get the following error:
"An error occurred during the processing of /PerformancePoint/Pages/ppssample.aspx. Code blocks are not allowed in this file."
is there any way to fix it???
is there any good source to understand and deploy Performance Point 2010??
thanks All
Vit

I have tried the above PageParserPath settings, however none seem to fix this problem for me. Does anyone have another solution to this issue?
I've tried...
<PageParserPath VirtualPath="/Pages/ppssample.aspx"
CompilationMode="Always" AllowServerSideScript="true" />
<PageParserPath VirtualPath="/PerformancePoint/ppssample.aspx"
CompilationMode="Always" AllowServerSideScript="true" />
<PageParserPath VirtualPath="/mysitecollection/ppssample.aspx"
CompilationMode="Always" AllowServerSideScript="true" />
Help Please!!!

OIA rbacx/WEB-INF files' changes are not effecting

Hi All,
We have deployed OIA 11.1.1.5.0 in weblogic 10.3.5 (as folder deployment) , on top of managed server "oia_server1".
when ever, we changes any config files in rbax/WEB-INF folder, thats not effecting immediatly (after restart also, its not effecting). Its effecting, after redeploy the war again.
We have deployed war as "folder deployment method" (selected war as folder), in our previous env, it was effected immdiatly (with out restart). In our new deploy, we have created "managed sevrer" and deployed on top of managed server and its not effecting immediately, when we change any files in rbacx/WEB-INF folder.
Please suggest me.
Thanks.

It happened to me as well :(
The deployment gets effected only if you re-deploy the war file or click on Update (if you are using Weblogic).
The managed server takes the cache folders of deployment even after the re-start. The only difference and way to perform is to update the application in the deployments section, which does not even require a restart of the server.
Krish.

Code changes are not reflecting

Hi,
I am facing one strange issue.
One of my colleague developer made some code changes. He checkin the code and was transported successfully to quality system. The changes are working fine in quality system.
Now using my NWDS I synced the code by connecting to NWDI. When I build and deployed the code in my local server I am not able to see the all the code changes in my system. I am able to see some label changes but not all the code changes.
I checked the deployment of my local server by keeping some print statements and it is fine.
I removed the entire configuration from Development Configurations perspective and imported the configuration, created the project again. But still I am facing the same issue.
Can anyone help me in resolving this issue.
Regards
MQ

Hello MQ,
That is weired..Can you check in C:/USR/... where your JSP's and Java classes gets deployed. See if you get the changes deployed at this location you are looking for. You need to decompile your class file to Java file to see the content of it. If you still have issues , remove all the DC's from your NWDS, import again from the track , undeploy your EAR from SDM, and deploy it again.
But some other functionalities which are coming in my system are not coming in that system. Did you deploy to any server? If so, are you seeing all your changes on the server. Check you are connecting to right NWDI and to the right track.
I am sure you might have tried all these options..but nothing is striking to my mind at this time.
Thanks,
Raj

Changes are not saved in Exported file

I am using the trial version of Lightroom 5. When I do a Lens Correction and then export the file, the new file is the same as the original before my corrections when I open it in Photoshop or another program. Help!

Lr & Photoshop both have the potential to use tiny (xmp) files for storing changes (and never save any other files), and both can save/export big honkin' tiffs, or like-sized jpegs...
If you save files in Photoshop with layers and such stuff, the files can get pretty big.
So, to answer your question: "It depends..." - which files, how saved/exported...
Try some stuff and inspect the file sizes!
Rob

Problem in building and changes are not reflecting

Hi Team,
When I am building my DC, It is building without any errors,
But it is not showing anything like build failed yes or no.
I feel Its not building my DC,bcoz in tasks its not showing my DC name.
When I deploy, It is deploying without any errors, but my changes are not effecting.
What could be the problem ?
Thanks in advance.
Regards,
Naresh

Hi Ayyapparaj,
Thank you very much for your reply.
I have reverted the activity i have created for the DC, and deleted the activity.
I have deleted that DC from my NWDS also.
Now I have created the project again, with new activity.
And made the changes, build and deploy.
But still the changes are not effected.
When I build my DC, It is not showing any errors in tasks,
but My DC name is not there in tasks.
I feel my Dc is not building at all.
If some other user is created any activity on same DC but not checked in, then will create this kind of problem ??
I am not sure , where it is going wrong?
Its not showing like build failed---NO.
Its not showing any errors also.
Build is happening within 2 seconds.
Can you please sort it out..??
Thanks in advance.
Regards,
Naresh

BADI Changes are not taking effect

Hi,
I have done few changes at BADI...but those changes are not taking effect...
I activated everything...wat might b the problem?
Regards,
venkat
Moderator message: too vague, help not possible, please describe problems in all technical detail if posting again.
Edited by: Thomas Zloch on Feb 23, 2011 3:02 PM

Yes, Actually after looking into the problem some more it looks like the
changes are taking effect. The only problem that we are having is that
the start bar does not appear when the user log in and no drives are
showing up under windows explorer. I checked the policy and we did not
configure the section under windows explorer so i am not sure why the
drives are not showing. Also I am not sure why the start bar does not
appear.
Dan

When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

Have used Aperture for some time - at some point this stopped working - not sure when
workflow:
click photo and elect to use the external editor (Photoshop Elements 9)
Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
Have to change the type to 8-bit in Photoshop to start making changes
When done and I exit I am prompted to save the photo
On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
Other Things:
I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
Current version of Aperture is 3.1.3, Elements is 9.0
Any help/suggestions greatfully received

Try using psd. Some rerports indicate some confustion between the apps with TIFF. See:
https://discussions.apple.com/message/15921933#15921933
I cannot confirm, nor test, since I use PS CS5, and not Elements.
Ernie

HT4075 I tried the steps mentioned above but the changes are not being saved.

I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

The link you posted gives be a 404 not found message.
The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos.
The standard URL for domain names that are forwarded with the CNAME method is:
http://www.domain_name.com/site_name/page_name.html.
You can change the site and page names in iWeb to give you something more informative about the site and page.
If you're publishing to a 3rd party server and want to get rid of the site name in the url and only have
http://www.domian_name.com/page_name.html
do the following:
publish the site to a folder on your hard drive (already done)
use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
You should delete the old site folder and files that are currently there beforehand.

Changes are not updating :(

Hi-
For the past few days, after I save changes (and these are simple text changes) they are not showing up on my webpage. The upload seems to be a little slow lately, but I'm not getting any error messages......it says it has uploaded. But....my changes are not there
Is anyone else experiencing this??? Any advice???
Thanks!

yes, empty your cache as kabing said!
a cache saves files from your website when you visit it often - therefore it loads faster. yet when you make changes to your website - they are then not recongnized and the old page is still showing!
so my advice, empty your cache everytime you publish!
max

Re-publish site using 3rd party FTP Client-Changes are not visible

I uploaded my Iweb site to the server using FileZilla. When I make changes in I-web and republish, the changes are not visible. I even tested it out by deleting the site folder and re-uploading everything after I re-published the site in IWeb...but the change still isn't visible. Any suggestions as to why?

Apparently you publish to a folder.
iWeb's job is done!
What you do next with the files is your responsibility.
Try uploading the changed files to their respective folders on the server.
You can identify the changed files by the date/time.
Then in the browser, clear the cache and reload the page.
iWeb is not involved.

Why changes are not visible in alternate profit center heirarchy?

Hi
I did changes in the master data of profit center. I chaged the profit center group in the masterdata of profit center & the same change is visible in the standard heirachy but the changes are not visible in the alternative heirarchy.
I think it should visible as I did changes in the master data.
I just want to know why it is like so or there is some other way to change the master data.
I know i can drag the profit center as well in t code KCH9 or KCH 2.
After doing so i activated the same.
Waiting for sugestions, comments.
Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
Edited by: Smruti Mohanty on Nov 13, 2008 2:03 PM
Edited by: Smruti Mohanty on Nov 13, 2008 3:02 PM

Hi,
If your are using same profit center group(which is used in standard hierarchy) in alternate hierarchy,you will see change.
if your using different groups in Standard hierarchy and Alternate hierarchy you will not see change in alternate hierarchy.
hope this helps you.
Thanks,
Rau

Changes are not applying to the reports

hi all
i have moved the RPD and catalog file to UAT there i got few changes
i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
so i again i copied same RPD and catalog to UAT now it is working fine,
why the changes are not applied to the reports that i have moved to UAT
is it mandatory to move RPD and catalog to the other environment ??
Thanks

Hi,
if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
If not you need to deploy RPD and catalog into UAT.
By,
KK

Code changes are not effected in .swf file

Similar Messages

Maybe you are looking for