Code gets stuck at daqmxbasecreatetask
Hi there,
I'm running the NI-DAQmx base on Mac os X with labview 7.1. I'm trying to use the dio C code examples that came with it, in particular writedigport.c (attached)
The thing is, when running the executable I get no signal, instead the program just get stuck. With some prodding I found that the it hangs at the call to DAQmxBaseCreateTask
The line is: DAQmxErrChk (DAQmxBaseCreateTask ("", &taskHandle));
I'm not sure what to do about this and would appreciate it if anyone could help me resolve this issue. All the example vi code runs fine in labview, so ii'm pretty sure the ports are set up right. Also, I'm pretty sure I'm calling the right port (Dev1/port0) so I don't think that's the problem.
Thanks,
Aatish
From NIDAQmxBase.h:
#define DAQmxErrorInvalidDeviceID (-200220)
Looks like you aren't using the correct name for your device.
John Weeks
WaveMetrics, Inc.
Phone (503) 620-3001
Fax (503) 620-6754
www.wavemetrics.com
Similar Messages
-
My Code Gets Stuck in One Loop
Hey LabVIEWer's,
Sometimes when I try to run code with mulitple loops the code execution gets stuck in just one of the loops leaving the other loops to run once initially but then fail to run again unless I stop the code and restart. Has anyone had any experience with this? Does anyone have any advice?
I've attached an image of my code.
Thanks,
Mike
Attachments:
code.jpg 333 KBUnfortunately, you don't really show the rest of the code, and it's kind of impossible to debug a picture. What are the termination conditions on the other loop. Is the other loop actually stopping, or is it waiting for something? Did you turn on highlighting to see whether you're stuck inside a subVI? You may have subVI dependencies so that the one loop is calling a subVI that eventually uses a subVI that is called by one of the VIs in the other loop. If you get stuck inside this subVI then the other loop as to wait, unless that subVI is reentrant.
-
I cant reset my iphone because it demand restriction code, em stuck now, kindly help what to do to get the **** out ov this?
Force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808 -
Pleaseeeee urgent i need help. my iphone 5c is getting stuck at the end while restoring and after 2 hours it is exiting with error code (3). Itunes downloaded the 7.0.2 ipsw and it is failing to restore the phone. i tried this on many computers and on each computer I did the uninstall and the reinstall trick for itunes. Nothing worked and im left with a ******** stuff with no software installed!!!!!!!!!!!!!!!!!!!!!
Hi there masfahani,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
P67A-GD65 gets sometimes gets stuck on boot status code 98 until i turn of main
Hi,
I have a issue which seems to be more recurring over time - it simply gets stuck on the first status code screen, it continues to do it until I power down system by mains for 10 secs.
To start with I'd say only once a month but now about once a week.
The usual boot status codes read "98 B4 98 94" and when the problem occurs it just gets stuck on the first 1.
To quote another forum member
Quote
0x92 PCI Bus initialization is started
0x93 PCI Bus Hot Plug Controller Initialization
0x94 PCI Bus Enumeration
0x95 PCI Bus Request Resources
0x96 PCI Bus Assign Resources
0x97 Console Output devices connect
0x98 Console input devices connect
0x99 Super IO Initialization
0x9A USB initialization is started
0x9B USB Reset
0x9C USB Detect
0x9D USB Enable
From what I've read it seems to be down to imput devices, I have logitech mx518 and g15 keyboard which previously had a problem that was fixed 2 BIOS updates ago (which may well have been when this started)
Here's a couple of threads I found of simular problems
Code: [Select]
https://forum-en.msi.com/index.php?topic=151778.0
https://forum-en.msi.com/index.php?topic=145195.0
https://forum-en.msi.com/index.php?topic=147690.0
https://forum-en.msi.com/index.php?topic=152005.0
Would love to hear from some others because I don't know what to do about it really with it being quite rare it's hard to test possible causes/fixes.
Thanks.pH0tr0N, please start your own new topic regarding your problem.
>> Please read and comply with the Forum Rules <<
>> Posting Guide <<
I don't really know as I have the as shipped BIOS 1.9 on mine and only problem I have is my mouse doesn't work in BIOS and since mice never worked in BIOS before these new MB's it's nothing I'm concerned about. It seems every new BIOS fixes one thing and then another problem crops up for other people so I'm sticking with the no mouse and no other problems BIOS 1.9. The only BIOS's I understand that have had the fewest problems for most people have been 1.9 & 1.C. Mines goes through POST so fast I can't even read anything as it flashes by everything in just a few seconds and goes to loading Windows.
Unplugging the USB devices was just a suggestion for test purposes not a work around for the problem. -
I get caught in a loop when trying to log into my account in iTunes and redeeming cards. When i enter my password i get stuck in a loop where i kept getting asked for it over and over again. The weird thing is intermittently - maybe after 20 or 30 times it lets me redeem/in. But then it has the same problem again... I tried chat and it kept dropping out. Any help would be very welcome.
Ok, time to report the issue here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress.
Refer to EX11....
Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium -
I ran into a glitch on my system that I tried to fix myself. My NOD32 was always showing the yellow warning circle as my protection status when I started my computer. I tried to fix this every way I new how.
Then I started to get pop ups asking me to fix and then send system error reports to Windows. Some stating they were '''''critical.''''' So I sent NOD32 the e-mail below.
'''Me:''' I cannot seem to run a complete system scan. I keep getting stuck at 56% at the following point. C:\Documents and Settings\Owner\Application Data\
Mozilla\Firefox\Crash Reports\Pending
I also keep getting messages to send error reports to Microsoft constantly. I also have this code C:\pagefile.sys-error opening
Thank you for your assistance.
'''Their solution:'''
Based on the information you provided, we recommend that you upgrade to latest version of ESET NOD32 Antivirus and see if this makes a difference.
Please click or copy/paste the following ESET Knowledgebase article into your web browser for step-by-step instructions:
'''Me''' : I did as they requested and am fully upgraded and licensed with their new edition.
Ran a new scan same problem.
I sent them a new e-mail but now wonder if it is a Firefox issue as, C:\Documents and Settings\Owner\Application Data\
''Mozilla\Firefox\Crash Reports\Pending'' this is where the scan stalls.
Any help would be appreciated.
Thank you.Try delete the files in Pending folder and make the scan again, do not be afraid to delete the files see : https://support.mozilla.org/en-US/questions/679996
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
Here is a script I am using to export recordings made with EyeTV. My problem is when the script is triggered from EyeTV when the recording is done it works just fine. If I run the script as a stand alone app on a selected recording it gets stuck at the CheckMultiplePIDs subroutine. I put a display dialog before and after the "set logdata to every paragraph of input_text" line and only the first dialog box shows and nothing obvious is happening. I tried to take out the non-relevant code to make things a little easier to read. If you want to see all the code I can post that.
-- Run the python MarkCommercials script for the given recording
-- this must be run with the RecordingStarted script
-- it will check if there were multiple PIDs for the recording and runs MarkCommercials for each pid
-- requires updated MarkCommercials which allows specifying the pid
-- by Ben Blake, September 2009
global LogMsg
on RecordingDone(recordingID)
set LogMsg to ""
CheckMultiplePIDs(recordingID)
--display dialog "in RecordingDone" & recordingID
--disable this if you do not want a logfile written
end recordingdone
-- one more edit for plex export, only section below.
on readFile(unixPath)
set foo to (open for access (unixPath))
set txt to (read foo for (get eof foo))
close access foo
return txt
end readFile
-- testing code: this will not be called when triggered from EyeTV, but only when the script is run as a stand-alone script
on run
tell application "EyeTV"
set selectedRecordings to selection of programs window
repeat with theRecording in selectedRecordings
--display dialog "theRecording ID " & (get unique ID of theRecording as integer)
set recordingID to unique ID of theRecording as integer
my RecordingDone(recordingID)
end repeat
end tell
end run
on CheckMultiplePIDs(recordingID)
--check if there are multiple Video PIDs in the file
tell application "EyeTV"
set input_text to my read_from_file((path to "logs" as string) & "ETVComskip" & ":" & recordingID & "_comskip.log")
if (count of (input_text as string)) > 0 then
set logdata to every paragraph of input_text
set logdata_lastrow to (item ((count of logdata) - 1) of logdata) as string
if (items 1 thru 19 of logdata_lastrow) as string = "Video PID not found" then
--multiple Video PIDs, rerun MarkCommercials until successful
set recrdingIDInteger to recordingID as integer
set rec to recording id recrdingIDInteger
set LogMsg to "RecordingDone found multiple PIDs for recording ID: " & recordingID & ", Channel " & (channel number of rec) & " - " & (title of rec)
set PIDs to (items 44 thru ((count of logdata_lastrow) - 2) of logdata_lastrow) as string
set delims to AppleScript's text item delimiters
set AppleScript's text item delimiters to ", "
set PID_List to {}
set PID_List to every word of PIDs
set AppleScript's text item delimiters to delims
repeat with pid in PID_List
my launchComSkip(recordingID, pid)
repeat while (my mcIsRunning())
delay 5
end repeat
end repeat
end if
end if
end tell
end CheckMultiplePIDs
on read_from_file(target_file)
--return the contents of the given file
set fileRef to (open for access (target_file))
set txt to (read fileRef for (get eof fileRef) as «class utf8»)
close access fileRef
return txt
end read_from_file
on write_to_file(this_data, target_file, append_data)
--from <a class="jive-link-external-small" href="http://www.apple.com/applescript/sbrt/sbrt-09.html">http://www.apple.com/applescript/sbrt/sbrt-09.html</a>
try
set the target_file to the target_file as string
set the open_target_file to open for access file target_file with write permission
if append_data is false then set eof of the open_target_file to 0
write this_data to the open_target_file starting at eof
close access the open_target_file
return true
on error
try
close access file target_file
end try
return false
end try
end write_to_file
on launchComSkip(recID, pid)
if pid = "" then
set cmd to "'/Library/Application Support/ETVComskip/MarkCommercials.app/Contents/MacOS/MarkCommercials' --force --log " & recID & " &> /dev/null &"
else
set cmd to "'/Library/Application Support/ETVComskip/MarkCommercials.app/Contents/MacOS/MarkCommercials' --force --log " & recID & " --pid=" & pid & " &> /dev/null &"
end if
do shell script cmd
end launchComSkip
on mcIsRunning()
set processPaths to do shell script "ps -xww | awk -F/ 'NF >2' | awk -F/ '{print $NF}' | awk -F '-' '{print $1}' "
return (processPaths contains "MarkCommercials")
end mcIsRunning
--Subroutine to remove troublesome characters
to parseout(stringtoparse)
set illegals to (ASCII character of 60) & (ASCII character of 62) & (ASCII character of 58) & (ASCII character of 34) & (ASCII character of 47) & (ASCII character of 92) & (ASCII character of 124)
repeat with i from 1 to count (illegals)
set testletter to (text i thru i of illegals)
set the_offset to 1
repeat
set the_offset to offset of testletter in stringtoparse
if the_offset > 0 then
set stringtoparse to (text 1 thru (the_offset - 1) of stringtoparse) & "_" & (text (the_offset + 1) thru -1 of stringtoparse)
else
exit repeat
end if
end repeat
end repeat
return stringtoparse
end parseoutWhile this isn't a solution, you could write lots of output to a log file. You should eventually see where it is stalling out. I use textwrangle to look at the log file while it is running.
the code escape is. Notice the tag is the same for start & end:
your code here
Here is my log program.
Write debug text to the file /debugLog.txt
example
--- debug on Friday, February 11, 2011 2:23:20 PM ---
start program.
thePath = Macintosh-HD:
End of program.
fyi:
The applescript log statements are ignored when not run from the script editor.
on run
-- thePath points to the folder in which to create the debug log.
global thePath, firstRunning
(* Use the path to clause to create a generalized path statements *)
set thePath to (path to startup disk as string)
set firstRunning to ""
-- Write a message into the applescript editor event log.
log " --- Starting on " & ((current date) as string) & " --- "
debug("start program. ")
Your program here...
debug("thePath = " & thePath)
debug("End of program. ")
end run
on appendToFile(fileId, theData)
local theSize, writeWhere
set theSize to (get eof fileId)
set writeWhere to theSize + 1 as integer
write theData to fileId starting at writeWhere
end appendToFile
-- based on log by James Reynolds, 12.18.2000, University of Utah
on debug(theMessage)
global thePath, firstRunning
local theSize, startupDiskName, pathToLog, fileReference
set pathToLog to (thePath & "debugLog.txt")
try
set fileReference to (open for access file pathToLog ¬
with write permission)
log "firstRunning = " & firstRunning
set theSize to (get eof fileReference)
if firstRunning = "" then
set theSize to (get eof fileReference)
log "theSize = " & theSize
if theSize is equal to 0 then
appendToFile(fileReference, "New log created on " & ((current date) as string) & " " & return)
end if
appendToFile(fileReference, " --- debug on " & ((current date) as string) & " --- " & return)
set firstRunning to "running"
end if
appendToFile(fileReference, theMessage & return)
close access fileReference
tell application "Finder"
set the creator type of the file pathToLog ¬
to "R*ch"
end tell
on error mes
try
log " We got an error when writing to " & mes
close access fileReference
end try
end try
end debug
Robert -
I can't sync my mobile with laptop, and dialogue on android device gets stuck. Is this a bug?
I use my Ee PC notebook as the "main device" and have successfully synced with my other laptop. When I try to sync with Android Phone however, I don't get a 3 x 4 digit code that I should enter in the dialogue pop-up on the main device.
My Android also shows 3x4 dots where i´m supposed to enter the code. So, no code, and two empty 3x4 dot dialogue pop-ups.
Worse, the dialoge pop-up on my Android device gets "stuck", It does not respond to the cancel button and won't go away when I use the arrow back-button on the device.Thank you for your reply. I tried to sync using the Sync key (by tapping "I don't have the device with me"), but again: the dialog pop-up on my android got stuck and I had to restart it.
Now I have trouble to log the bug to file it. I suppose I have to log the Android activity, since that is the device I'm having trouble with (syncing two laptops worked fine). But I have no idea were to find "about:sync-log" on my droid phone :-S
Hope you can help? Really appreciate it! -
Get Stuck in Webutil1.0.6 Configuration & Installation..
Dear All Experts,
I m trying to configure and Install webutil1.0.6 on Oracle Developer Suit (9.0.4) in
Windows XP Professional having the browser Internet explorer 6.0.
I have done almost all the steps mentioned in Runtime Setup Checklist (Appendix A)
in Webutil Users Guide Release 1.0.6 . Except Step 9 Configure your webutil.cfg file.
Have a look at my default.env & formsweb.cfg files.
default.env
# $Id: win32_os_default.env,v 1.5 2003/10/02 18:42:24 pkuhn Exp $
# default.env - default Forms environment file, Windows version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value in the Windows registry
# will be used. If no value is found in the registry, the value used will
# be that defined in the environment in which the servlet engine (OC4J
# or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=D:\DS10g
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# If you need to include more than one directory, they should be semi-colon
# separated (e.g. /private/dir1;/private/dir2)
FORMS90_PATH=D:\DS10g\forms90;D:\invsys;D:\DS10g\forms90\webutil_106;D:\Webutil_demo
# The PATH setting is required in order to pick up the JVM (jvm.dll).
# The Forms runtime executable and dll's are assumed to be in
# D:\DS10g\bin if they are not in the PATH.
# In addition, if you are running Graphics applications, you will need
# to append the following to the path (where <Graphics Oracle Home> should
# be replaced with the actual location of your Graphics 6i oracle_home):
# ;<Graphics Oracle Home>\bin;<Graphics Oracle Home>\jdk\bin
PATH=D:\DS10g\bin;D:\DS10g\jdk\jre\bin\client
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications. In addition, you will need to
# modify the PATH variable above as described above.
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
#GRAPHICS60_PATH=
# Settings for forms9i tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS90_TRACE_PATH=<FORMS_ORACLE_HOME>\forms90\server
# System settings
# You should not normally need to modify these settings
FORMS90=D:\DS10g\forms90
WEBUTIL_CONFIG=D:\DS10g\forms90\webutil_106\server\webutil.cfg
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here)
# f90srv.jar, repository.jar and ldapjclnt9.jar are required for
# the password expiry feature to work(#2213140).
CLASSPATH=D:\DS10g\j2ee\OC4J_BI_Forms\applications\forms90app\
forms90web\WEB-INF\lib\f90srv.jar;D:\DS10g\jlib\repository.jar;
D:\DS10g\jlib\ldapjclnt9.jar;D:\DS10g\jlib\debugger.jar;D:\DS10g\forms90\webutil_106\java\frmwebutil.jar;D:\DS10g\jlib\ewt3.jar;D:\DS10g\jlib\share.jar;D:\DS10g\jlib\utj90.jar;
D:\DS10g\jlib\zrclient.jar;D:\DS10g\reports\jlib\rwrun.jar;D:\DS10g\jdk\jre\lib\rt.jar;D:\DS10g\forms90\java\f90all.jar
formsweb.cfg
# $Id: formsweb.cfg,v 1.24 2003/08/22 01:07:35 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (f90servlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overriden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/servlet/f90servlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: base HTML file for use with Microsoft Internet Explorer
# (when using the native JVM)
baseHTMLie=baseie.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms90 if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# System parameter: JVM option for Microsoft Internet Explorer.
# This parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x or above. Put IE=native if you want
# the Forms applet to run in the browser's native JVM.
IE=JInitiator
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar;invsysicons.jar;frmwebutil.jar;jacob.jar
# webutil....
WebUtilArchive=frmwebutil.jar;jacob.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=f90all.jar;invsysicons.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0017-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,17
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.17
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=D:\DS10g
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration affecting users of MicroSoft Internet Explorer 5.x.
# Forms applet will run under the browser's native JVM rather than using Oracle JInitiator.
[ienative]
IE=native
# Example Named Configuration Section
# Example 3: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
baseHTMLie=basejpi.htm
# Example Named Configuration Section
# Example 4: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms90/l90servlet/debug
# Trying own applications
[itsys]
form=frm_sline.fmx
userid=docsys/docsys@orauma
separateFrame=True
lookandfeel=Generic
# Inventory system UMA, applications
[invsys]
form=FRM_LOGIN.fmx
userid=docsys/docsys@orauma
lookandfeel=Generic
# Sample configuration for deploying WebUtil.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[webutilie]
IE=native
webUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLie=webutilbase.htm
archive=frmall.jar
lookAndFeel=oracle
[webutiljpi]
webUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljpi.htm
baseHTMLjpi=webutiljpi.htm
baseHTMLie=webutiljpi.htm
baseHTML=webutiljpi.htm
archive=frmall.jar
lookAndFeel=oracle
NOW while I run form from RuntimeSettings=default
http://rana-adnan.umarine.local:8889/forms90/f90servlet?userid=docsys/docsys@orauma
Form runs successfully on browser but while pressing button for File Open OR Save As
It shows the error
Oracle.forms.webutil.file.FileFunctions bean not found.
WEBUTIL_FILE.FILE_SELECTION_DIALOG_INT will not work.
AND while I run form from RuntimeSettings=webutil or webutilie or webutiljpi
http://rana-adnan.umarine.local:8889/forms90/f90servlet?config=webutil&userid=docsys/docsys@orauma
Form does not run and browser gives the error
500 Internal Server Error
Forms Servlet Error.
Missing or invalid value for baseHTML parameter.
Please check the servlet configuration to make sure this value specifies a valid file.
I get stuck here.
Kindly help me to use webutil1.0.6
Thanks
Rana AdnanDear,
Now I have Installed the Jinitiator1.3.1.22 in C:\Program Files\Oracle\JInitiator 1.3.1.22
and edit the configuration in formsweb.cfg
Now it looks
# $Id: formsweb.cfg,v 1.24 2003/08/22 01:07:35 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (f90servlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overriden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/servlet/f90servlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: base HTML file for use with Microsoft Internet Explorer
# (when using the native JVM)
baseHTMLie=baseie.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms90 if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# System parameter: JVM option for Microsoft Internet Explorer.
# This parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x or above. Put IE=native if you want
# the Forms applet to run in the browser's native JVM.
IE=JInitiator
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar,invsysicons.jar,frmwebutil.jar,jacob.jar
# webutil....
WebUtilArchive=frmwebutil.jar,jacob.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=f90all.jar;invsysicons.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=D:\DS10g
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration affecting users of MicroSoft Internet Explorer 5.x.
# Forms applet will run under the browser's native JVM rather than using Oracle JInitiator.
[ienative]
IE=native
# Example Named Configuration Section
# Example 3: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
baseHTMLie=basejpi.htm
# Example Named Configuration Section
# Example 4: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms90/l90servlet/debug
# Trying own applications
[itsys]
form=frm_sline.fmx
userid=docsys/docsys@orauma
separateFrame=True
lookandfeel=Generic
# Inventory system UMA, applications
[invsys]
form=FRM_LOGIN.fmx
userid=docsys/docsys@orauma
lookandfeel=Generic
# Sample configuration for deploying WebUtil.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=on
WebUtilLoggingDetail=normal
WebUtilErrorMode=AllWebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=f90all_jinit.jar
archive=f90all.jar
lookAndFeel=oracle
[webutilie]
IE=native
webUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLie=webutilbase.htm
archive=f90all.jar
lookAndFeel=oracle
[webutiljpi]
webUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljpi.htm
baseHTMLjpi=webutiljpi.htm
baseHTMLie=webutiljpi.htm
baseHTML=webutiljpi.htm
archive=f90all.jar
lookAndFeel=oracle
Now when I run the form then browser shows Jinitiator Security Warning dialog and I clicked on "Grant this Session" and it show nothing
and java console showing this..
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\rana.adnan
Proxy Configuration: no proxy
JAR cache enabled
Location: C:\Documents and Settings\rana.adnan\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://rana-adnan.umarine.local:8889/forms90/java/frmwebutil.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.6
Is there any signing jar files problem or any other?
Please help
Thanks
Rana adnan -
Cannot install Windows 7 Pro; gets stuck on "Starting Windows" screen
I have read dozens of posts on this topic but none has helped yet.
My system has Windows 8 with UEFI. I want to install Windows 7 Pro on another partition. I have turned off Secure Boot in the UEFI/BIOS. When I try to install Windows 7 Pro from a DVD it shows "windows is loading files" and then gets stuck on "Starting Windows"
for ever. This happens even when no USB peripherals are attached.
I have already wasted many days on this. I hope someone can help.
Thanks!Hi friends of the internet
I have been reading several forums regarding the issue of installing windows 7 (64 bit) to a computer that have had windows 8 installed previously or just a GPT formatted disk.
My Case:
Windows version installed: Windows 7 Professional N with Service Pack 1 (x64) or Windows 7 Professional (x64)
Computer used: Samsung laptop
Model Code: NP53U4C-A02SE
See the specks here:
http://www.samsung.com/dk/consumer/computer-peripherals/notebook/notebook/NP535U4C-A02SE-spec
Create a USB install disk that not freezes at ”starting windows” screen:
First I followed this great guide (Thanks Daniel):
http://
hodgin.ca/2012/10/02/creating-a-uefibios-windows-7-usb-and-installing-to-gpt-partitions/
STOP AFTER STEP 13!
1. Open a command line in administrator mode
2. run DISKPART
3. type LIST DISK
4. Look for the disk number that represents your USB drive
5. type SELECT DISK # where # represents the number of your USB drive. Get this right or you will wipe a different drive out.
6. type CLEAN
7. type CREATE PARTITION PRIMARY
8. type SELECT PARTITION 1
9. type ACTIVE
10. type FORMAT fs=fat32 quick
11. type assign
12. The drive should now be formatted and marked as active and fat32. Do not format the drive as NTFS or you will only be able to boot into the installer in BIOS mode.
13. Now you will need to copy the contents of the windows 7 install dvd to the USB with a regular copy paste from windows explorer.
Here comes a very weird hack... I do not know why it works, but I think it is all about flash drive data structure. I did these steps on a win 7 prof. computer.
(Let’s assume it’s drive E:)
Make a copy of your e:\efi\microsoft folder to e.g. your desktop.
Delete the e:\efi folder
Copy the \efi folder from a windows 8 installation disk (I used Windows 8 (x64) Professional) to the e:\efi folder. Sorry I cannot provide this for you.
Here comes the weird part. Then delete e:\efi\microsoft you just copied from the win 8 installation disk.
Copy the \microsoft folder form the desktop to e:\efi\microsoft
Resume the guide from step 18.:
http://
hodgin.ca/2012/10/02/creating-a-uefibios-windows-7-usb-and-installing-to-gpt-partitions/
18. Insert the USB in the machine and turn it on and boot into the UEFI/BIOS loader and check for boot options. On the ASUS Zenbook it detected two boot options on the USB drive. One was UEFI and one was regular BIOS. I made the
UEFI option the first choice and restarted the machine.
My bios setup was:
Secure Boot = Disable
OS Mode Selection = CSM and UEFI OS
Boot Device Priority = I made the UEFI option the first choice and restarted the machine.
The installation should start normal.
E.g. See this guide:
www.sevenforums.com/tutorials/186875-uefi-unified-extensible-firmware-interface-install-windows-7-a.html
What I did was:
Select custom installation (Advanced).
Click Drive options (Advanced).
Delete all partitions (this might not be needed). When I did not delete all partitions I was asked every time after the install, during start up by the windows boot manager to select ether win 8 or win 7.
Click new (DO NOT make Changes in the size of the disk), apply, see NOTE!
Edit the Primary partition as you want it e.g. divide it to more partitions.
Select the one you will install windows on and do a normal install.
I do not make changes in the Bios after install. The Boot priority is automatic set to “Windows boot manager”. If I change the boot mode back to OS Mode Selection = UEFI OS, the computer will freeze at the “starting windows” screen again.
All this worked for me, good luck. There might be more to it, but this is a start.
By the way, the start up time for a MBT install was 37 s. And for the GPT it was 49 s.
Remember if we stand on each other’s shoulders we will reach higher
J.
NOTE: Here the installation program should create three partitions automatically!
Partition 1 - System - The EFI System partition that contains the NTLDR, HAL, Boot.txt, and other files that are needed to boot the system, such as drivers.
Partition 2 - MSR - The Microsoft Reserved (MSR) partition that reserves space on each disk drive for subsequent use by operating system software.
Partition 3 - Primary - Where Windows is to be installed to.
If this isn’t the cast you are not installing in UEIF mode. To check for this (thanks again Daniel):
If you need to find out if you have booted into BIOS mode or UEFI mode when the installer starts you can press SHIFT+F10 when the welcome installer shows up to open a cmd prompt. from here you will likely be at X:\Sources. Type cd .. to
go back a dir and move into \Windows\Panther\
Then type notepad setupact.log
Within this file do a ctrl+f and search for
Callback_BootEnvironmentDetect: Detected boot environment:
It should either say BIOS or UEFI.
To check if your disk is in the GPT format.
Open the command prompt.
Type: DISKPART
Type: List Disk
See for the star (*) in the GPT column -
Messages getting stuck in SMQ2
Messages get stuck in SMQ2 with the Error msg "SQL error on database occurred when accessing a table".
This is happening on PI system 7.11 SP04 with Max DB version 7.7.06.07.
This typically happens when sending messages from one BPM to another although it has more of a random pattern.
A corresponding dump is also seen in ST22.
The dump details are as below:
Runtime error : DBIF_RSQL_SQL_ERROR
Exception : CX_SY_OPEN_SQL_DB
Database error text : Invalid numeric value for parameter/column (10)
Internal call code : "[RSQL/UPDT/SWFRXIHDR ]"
Any help is highly appreciated in resolving this issue.
Regards,
Murali Narayanan> The dump details are as below:
> Runtime error : DBIF_RSQL_SQL_ERROR
> Exception : CX_SY_OPEN_SQL_DB
> Database error text : Invalid numeric value for parameter/column (10)
I would update the kernel (plus the database interface library lib_dbsl) to the latest patchlevels and try again. If the error persists I'd upgrade the database to the latest patchlevel. If it still doesn't work I'd open an OSS call (BC-DB-SDB).
Markus -
IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play
I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
Final cut pro gets stuck for days in the middle of work. Force quit doesn't solve the problem. It happens every once in a while.
Jan 29 00:00:00 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:00:02 ronnies-iMac-8.local WindowServer[106]: disable_update_timeout: UI updates were forcibly disabled by application "Dropbox" for over 1.00 seconds. Server has re-enabled them.
Jan 29 00:00:02 ronnies-iMac-8.local WindowServer[106]: common_reenable_update: UI updates were finally reenabled by application "Dropbox" after 1.33 seconds (server forcibly re-enabled them after 1.00 seconds)
Jan 29 00:00:05 ronnies-iMac-8.local WindowServer[106]: disable_update_timeout: UI updates were forcibly disabled by application "Dropbox" for over 1.00 seconds. Server has re-enabled them.
Jan 29 00:00:06 ronnies-iMac-8.local WindowServer[106]: common_reenable_update: UI updates were finally reenabled by application "Dropbox" after 2.16 seconds (server forcibly re-enabled them after 1.00 seconds)
Jan 29 00:00:20 ronnies-iMac-8.local WindowServer[106]: CoreAnimation: context hosting changed while locked!
Jan 29 00:03:43 ronnies-iMac-8.local WindowServer[106]: CoreAnimation: context hosting changed while locked!
Jan 29 00:04:16 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:04:16 ronnies-iMac-8 com.apple.iCloudHelper[5787]: objc[5787]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
Jan 29 00:04:16 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:08:11 ronnies-iMac-8.local Mail[355]: No worthy mechs found
Jan 29 00:08:41 ronnies-iMac-8 kernel[0]: process WindowServer[106] caught causing excessive wakeups. Observed wakeups rate (per sec): 154; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 3069375
Jan 29 00:08:41 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.ReportCrash.Root[5788]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
Jan 29 00:08:41 ronnies-iMac-8.local ReportCrash[5788]: Invoking spindump for pid=106 wakeups_rate=154 duration=293 because of excessive wakeups
Jan 29 00:08:52 ronnies-iMac-8.local spindump[464]: Saved wakeups_resource.diag report for WindowServer version ??? (???) to /Library/Logs/DiagnosticReports/WindowServer_2015-01-29-000852_ronnies-iMac-8.w akeups_resource.diag
Jan 29 00:10:08 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:10:51 ronnies-iMac-8.local SubmitDiagInfo[376]: The connection to https://radarsubmissions.apple.com/submit could not be created
Jan 29 00:10:51 ronnies-iMac-8.local SubmitDiagInfo[376]: Request object for https://radarsubmissions.apple.com/submit couldn't be created
Jan 29 00:10:51 ronnies-iMac-8.local SubmitDiagInfo[376]: Error while bootstrapping the main Config File
Jan 29 00:10:51 ronnies-iMac-8.local diagnostics_agent[346]: Submission failed
Jan 29 00:13:41 ronnies-iMac-8.local discoveryd[49]: Basic NATTServer Got control URL: http://10.0.0.138:5431//uuid:acf1df9e-1918-1819-9edf-f1acf19e180002/WANPPPConnec tion:1 (ppp)
Jan 29 00:13:58 ronnies-iMac-8.local com.apple.usbmuxd[52]: _SendAttachNotification Device 18:f6:43:39:08:1d@fe80::1af6:43ff:fe39:81d._apple-mobdev2._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
Jan 29 00:14:28 --- last message repeated 3 times ---
Jan 29 00:15:50 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:16:06 ronnies-iMac-8.local spindump[5796]: Saved diag report for powerstats version com.apple.SystemStats.Daily to /Library/Logs/DiagnosticReports/powerstats_2015-01-29-001605_ronnies-iMac-8.dia g
Jan 29 00:16:06 ronnies-iMac-8.local spindump[5796]: Removing excessive log: file:///Library/Logs/DiagnosticReports/powerstats_2015-01-09-073301_ronnies-iMa c-8.diag
Jan 29 00:16:11 ronnies-iMac-8 kernel[0]: Over-release of kernel-internal importance assertions for pid 5798 (AddressBookSourc), dropping 1 assertion(s) but task only has 0 remaining (0 external).
Jan 29 00:16:12 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:16:12 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.auditd[5800]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
Jan 29 00:16:12 ronnies-iMac-8.local auditd[5800]: Auditing enabled
Jan 29 00:16:12 ronnies-iMac-8.local auditd[5800]: Got low space trigger
Jan 29 00:16:12 ronnies-iMac-8.local auditd[5800]: auditd_read_dirs(): all audit log directories over soft limit
Jan 29 00:16:12 ronnies-iMac-8.local ronnie[5803]: audit warning: allsoft
Jan 29 00:16:12 ronnies-iMac-8.local ronnie[5804]: audit warning: soft /var/audit
Jan 29 00:16:12 ronnies-iMac-8.local auditd[5800]: renamed /var/audit/20150128214535.not_terminated to /var/audit/20150128214535.20150128221612
Jan 29 00:16:12 ronnies-iMac-8.local auditd[5800]: New audit file is /var/audit/20150128221612.not_terminated
Jan 29 00:16:12 ronnies-iMac-8.local ronnie[5806]: audit warning: closefile /var/audit/20150128214535.20150128221612
Jan 29 00:16:12 ronnies-iMac-8.local AddressBookSourceSync[5798]: [CardDAVPlugin-ERROR] -getPrincipalInfo:[_controller supportsRequestCompressionAtURL:https://gooshi777%[email protected]/carddav/v1/principals/gooshi777%40gmail .com///gooshi777%[email protected]/carddav/v1/principals/gooshi777%40gmail.com/] Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fb7db5ed530 {CoreDAVHTTPHeaders=<CFBasicHash 0x7fb7dd80e330 [0x7fff79b76cf0]>{type = immutable dict, count = 13,
entries =>
0 : Content-Type = <CFString 0x7fb7db4eea70 [0x7fff79b76cf0]>{contents = "text/html; charset=UTF-8"}
1 : Www-Authenticate = <CFString 0x7fb7db49e660 [0x7fff79b76cf0]>{contents = "basic realm="Google APIs""}
5 : Content-Encoding = gzip
6 : Server = GSE
7 : x-clienttoken-request = true
8 : x-xss-protection = <CFString 0x7fb7dd9023c0 [0x7fff79b76cf0]>{contents = "1; mode=block"}
9 : Expires = <CFString 0x7fb7db4a7b60 [0x7fff79b76cf0]>{contents = "Wed, 28 Jan 2015 22:16:12 GMT"}
12 : Cache-Control = <CFString 0x7fb7db4b25e0 [0x7fff79b76cf0]>{contents = "private, max-age=0"}
13 : Date = <CFString 0x7fb7db475320 [0x7fff79b76cf0]>{contents = "Wed, 28 Jan 2015 22:16:12 GMT"}
15 : Content-Length = 34
19 : x-content-type-options = nosniff
21 : x-frame-options = <CFString 0x7fb7db4a29e0 [0x7fff79b76cf0]>{contents = "SAMEORIGIN"}
22 : Vary = <CFString 0x7fb7db649840 [0x7fff79b76cf0]>{contents = "Origin, X-Origin"}
Jan 29 00:16:49 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:16:51 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb44efe0 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:16:51 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf926581c0 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:16:51 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:16:51 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:16:52 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: YES
Jan 29 00:16:52 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: YES
Jan 29 00:16:52 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:16:52 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: NO (Topics: (null))
Jan 29 00:16:52 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf9279e5d0 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:16:52 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:16:52 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: YES
Jan 29 00:16:52 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:17:11 ronnies-iMac-8.local nsurlstoraged[5512]: ERROR: shrinkDB - unable to start a DB transaction. Error-code=5
Jan 29 00:18:11 ronnies-iMac-8.local Mail[355]: No worthy mechs found
Jan 29 00:20:55 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf92428820 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:20:55 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb482940 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:20:55 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:20:55 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:20:55 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: NO
Jan 29 00:20:55 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: NO
Jan 29 00:20:55 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: YES (Topics: (null))
Jan 29 00:20:55 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: YES (Topics: (
"com.apple.private.alloy.icloudpairing",
"com.apple.private.alloy.continuity.encryption",
"com.apple.private.alloy.continuity.activity",
"com.apple.madrid",
"com.apple.private.ids",
"com.apple.private.alloy.phonecontinuity",
"com.apple.private.alloy.continuity.activity.public",
"com.apple.private.alloy.continuity.auth",
"com.apple.private.alloy.idsremoteurlconnection",
"com.apple.private.alloy.sms",
"com.apple.private.alloy.screensharing",
"com.apple.private.alloy.maps",
"com.apple.private.alloy.callhistorysync",
"com.apple.private.alloy.continuity.tethering"
Jan 29 00:20:55 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf92428820 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:20:55 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:20:55 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: NO
Jan 29 00:20:55 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: YES (Topics: (
"com.apple.madrid"
Jan 29 00:20:56 ronnies-iMac-8.local WindowServer[106]: CoreAnimation: context hosting changed while locked!
Jan 29 00:21:17 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:21:22 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb6304f0 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:21:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf9279d180 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:21:22 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:21:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:21:22 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: YES
Jan 29 00:21:22 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:21:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: YES
Jan 29 00:21:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: NO (Topics: (null))
Jan 29 00:21:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf92428820 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:21:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:21:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: YES
Jan 29 00:21:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:21:54 ronnies-iMac-8.local SubmitDiagInfo[376]: The connection to https://radarsubmissions.apple.com/submit could not be created
Jan 29 00:21:54 ronnies-iMac-8.local SubmitDiagInfo[376]: Request object for https://radarsubmissions.apple.com/submit couldn't be created
Jan 29 00:21:54 ronnies-iMac-8.local SubmitDiagInfo[376]: Error while bootstrapping the main Config File
Jan 29 00:21:54 ronnies-iMac-8.local diagnostics_agent[346]: Submission failed
Jan 29 00:22:39 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb4363d0 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:22:39 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf92679630 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:22:39 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:22:39 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:22:40 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: NO
Jan 29 00:22:40 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: NO
Jan 29 00:22:40 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: YES (Topics: (null))
Jan 29 00:22:40 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: YES (Topics: (
"com.apple.private.alloy.icloudpairing",
"com.apple.private.alloy.continuity.encryption",
"com.apple.private.alloy.continuity.activity",
"com.apple.madrid",
"com.apple.private.ids",
"com.apple.private.alloy.phonecontinuity",
"com.apple.private.alloy.continuity.activity.public",
"com.apple.private.alloy.continuity.auth",
"com.apple.private.alloy.idsremoteurlconnection",
"com.apple.private.alloy.sms",
"com.apple.private.alloy.screensharing",
"com.apple.private.alloy.maps",
"com.apple.private.alloy.callhistorysync",
"com.apple.private.alloy.continuity.tethering"
Jan 29 00:22:40 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf927e6eb0 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:22:40 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:22:40 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: NO
Jan 29 00:22:40 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: YES (Topics: (
"com.apple.madrid"
Jan 29 00:22:52 ronnies-iMac-8.local discoveryd[49]: Basic DNSResolver Re-Binding to random udp port 56499
Jan 29 00:22:52 ronnies-iMac-8.local com.apple.WebKit.Plugin.64[5812]: Failed to connect (colorGridView) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
Jan 29 00:22:52 ronnies-iMac-8.local com.apple.WebKit.Plugin.64[5812]: Failed to connect (view) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
Jan 29 00:22:58 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:23:58 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb517b30 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:23:58 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf9256ee80 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:23:58 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:23:58 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:23:59 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: YES
Jan 29 00:23:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: YES
Jan 29 00:23:59 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:23:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: NO (Topics: (null))
Jan 29 00:23:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf9241e3b0 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:23:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:23:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: YES
Jan 29 00:23:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:24:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf92717cb0 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:24:22 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb523d50 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:24:22 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:24:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:24:22 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: NO
Jan 29 00:24:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: NO
Jan 29 00:24:22 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: YES (Topics: (null))
Jan 29 00:24:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: YES (Topics: (
"com.apple.private.alloy.icloudpairing",
"com.apple.private.alloy.continuity.encryption",
"com.apple.private.alloy.continuity.activity",
"com.apple.madrid",
"com.apple.private.ids",
"com.apple.private.alloy.phonecontinuity",
"com.apple.private.alloy.continuity.activity.public",
"com.apple.private.alloy.continuity.auth",
"com.apple.private.alloy.idsremoteurlconnection",
"com.apple.private.alloy.sms",
"com.apple.private.alloy.screensharing",
"com.apple.private.alloy.maps",
"com.apple.private.alloy.callhistorysync",
"com.apple.private.alloy.continuity.tethering"
Jan 29 00:24:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf9260b1c0 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:24:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:24:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: NO
Jan 29 00:24:22 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: YES (Topics: (
"com.apple.madrid"
Jan 29 00:25:59 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb50b850 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:25:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf9256ee80 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:25:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:25:59 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:25:59 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: YES
Jan 29 00:25:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: YES
Jan 29 00:25:59 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:25:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: NO (Topics: (null))
Jan 29 00:25:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf9242b0d0 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:25:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:25:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: YES
Jan 29 00:25:59 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:28:11 ronnies-iMac-8.local Mail[355]: No worthy mechs found
Jan 29 00:28:41 ronnies-iMac-8.local discoveryd[49]: Basic NATTServer Got control URL: http://10.0.0.138:5431//uuid:acf1df9e-1918-1819-9edf-f1acf19e180002/WANPPPConnec tion:1 (ppp)
Jan 29 00:30:53 ronnies-iMac-8.local com.apple.WebKit.Plugin.64[5822]: Failed to connect (colorGridView) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
Jan 29 00:30:53 ronnies-iMac-8.local com.apple.WebKit.Plugin.64[5822]: Failed to connect (view) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
Jan 29 00:32:57 ronnies-iMac-8.local SubmitDiagInfo[376]: The connection to https://radarsubmissions.apple.com/submit could not be created
Jan 29 00:32:57 ronnies-iMac-8.local SubmitDiagInfo[376]: Request object for https://radarsubmissions.apple.com/submit couldn't be created
Jan 29 00:32:57 ronnies-iMac-8.local SubmitDiagInfo[376]: Error while bootstrapping the main Config File
Jan 29 00:32:57 ronnies-iMac-8.local diagnostics_agent[346]: Submission failed
Jan 29 00:35:19 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb635250 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:35:19 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf92717cb0 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:35:19 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:35:19 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:35:19 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: NO
Jan 29 00:35:19 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: NO
Jan 29 00:35:19 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: YES (Topics: (null))
Jan 29 00:35:19 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: YES (Topics: (
"com.apple.private.alloy.icloudpairing",
"com.apple.private.alloy.continuity.encryption",
"com.apple.private.alloy.continuity.activity",
"com.apple.madrid",
"com.apple.private.ids",
"com.apple.private.alloy.phonecontinuity",
"com.apple.private.alloy.continuity.activity.public",
"com.apple.private.alloy.continuity.auth",
"com.apple.private.alloy.idsremoteurlconnection",
"com.apple.private.alloy.sms",
"com.apple.private.alloy.screensharing",
"com.apple.private.alloy.maps",
"com.apple.private.alloy.callhistorysync",
"com.apple.private.alloy.continuity.tethering"
Jan 29 00:35:19 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf9243aef0 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:35:19 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:35:19 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: NO
Jan 29 00:35:19 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: YES (Topics: (
"com.apple.madrid"
Jan 29 00:36:33 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:37:05 --- last message repeated 3 times ---
Jan 29 00:37:08 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:37:16 ronnies-iMac-8.local com.apple.WebKit.Plugin.64[5831]: Failed to connect (colorGridView) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
Jan 29 00:37:16 ronnies-iMac-8.local com.apple.WebKit.Plugin.64[5831]: Failed to connect (view) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
Jan 29 00:37:51 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb635250 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:37:51 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf927d4e30 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:37:51 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:37:51 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: YES
Jan 29 00:37:51 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:37:51 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:37:51 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: YES
Jan 29 00:37:51 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: NO (Topics: (null))
Jan 29 00:37:51 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf927d4e30 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:37:51 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:37:51 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: YES
Jan 29 00:37:51 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:38:42 ronnies-iMac-8.local Mail[355]: No worthy mechs found
Jan 29 00:41:58 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf925801d0 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:41:58 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb71d480 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:41:58 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:41:58 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:41:58 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: NO
Jan 29 00:41:58 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: NO
Jan 29 00:41:58 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: YES (Topics: (null))
Jan 29 00:41:58 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: YES (Topics: (
"com.apple.private.alloy.icloudpairing",
"com.apple.private.alloy.continuity.encryption",
"com.apple.private.alloy.continuity.activity",
"com.apple.madrid",
"com.apple.private.ids",
"com.apple.private.alloy.phonecontinuity",
"com.apple.private.alloy.continuity.activity.public",
"com.apple.private.alloy.continuity.auth",
"com.apple.private.alloy.idsremoteurlconnection",
"com.apple.private.alloy.sms",
"com.apple.private.alloy.screensharing",
"com.apple.private.alloy.maps",
"com.apple.private.alloy.callhistorysync",
"com.apple.private.alloy.continuity.tethering"
Jan 29 00:41:58 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf92679630 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:41:58 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:41:58 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: NO
Jan 29 00:41:58 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: YES (Topics: (
"com.apple.madrid"
Jan 29 00:41:59 ronnies-iMac-8.local WindowServer[106]: CoreAnimation: context hosting changed while locked!
Jan 29 00:42:19 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:43:07 ronnies-iMac-8.local identityservicesd[268]: [Warning] ====== IDS Traffic Usage:
Jan 29 00:43:07 ronnies-iMac-8.local identityservicesd[268]: [Warning] Service: com.apple.madrid
Jan 29 00:43:07 ronnies-iMac-8.local identityservicesd[268]: [Warning] query-requests: 40
Jan 29 00:43:07 ronnies-iMac-8.local identityservicesd[268]: [Warning] queries: 8
Jan 29 00:43:07 ronnies-iMac-8.local identityservicesd[268]: [Warning]
Jan 29 00:43:07 ronnies-iMac-8.local identityservicesd[268]: [Warning] Service: com.apple.private.alloy.phonecontinuity
Jan 29 00:43:07 ronnies-iMac-8.local identityservicesd[268]: [Warning] incoming-messages: 9
Jan 29 00:43:07 ronnies-iMac-8.local identityservicesd[268]: [Warning]
Jan 29 00:43:07 ronnies-iMac-8.local identityservicesd[268]: [Warning] ====== Done
Jan 29 00:43:41 ronnies-iMac-8.local discoveryd[49]: Basic NATTServer Got control URL: http://10.0.0.138:5431//uuid:acf1df9e-1918-1819-9edf-f1acf19e180002/WANPPPConnec tion:1 (ppp)
Jan 29 00:43:59 ronnies-iMac-8.local SubmitDiagInfo[376]: The connection to https://radarsubmissions.apple.com/submit could not be created
Jan 29 00:43:59 ronnies-iMac-8.local SubmitDiagInfo[376]: Request object for https://radarsubmissions.apple.com/submit couldn't be created
Jan 29 00:43:59 ronnies-iMac-8.local SubmitDiagInfo[376]: Error while bootstrapping the main Config File
Jan 29 00:43:59 ronnies-iMac-8.local diagnostics_agent[346]: Submission failed
Jan 29 00:45:00 ronnies-iMac-8 bird[5541]: notify name "CKStatusReport" has been registered 20 times - this may be a leak
Jan 29 00:45:00 ronnies-iMac-8 bird[5541]: notify name "CKStatusReport" has been registered 40 times - this may be a leak
Jan 29 00:45:00 ronnies-iMac-8 bird[5541]: notify name "CKStatusReport" has been registered 60 times - this may be a leak
Jan 29 00:45:02 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.com.apple.mail is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:02 --- last message repeated 1 time ---
Jan 29 00:45:02 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:03 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.RZJZBPR7LW.il.co.mobile1.recpies is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:03 --- last message repeated 1 time ---
Jan 29 00:45:03 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:04 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.FQ2L79KK5B.be.timbroddin.Live-Street-View is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:04 --- last message repeated 1 time ---
Jan 29 00:45:04 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:05 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.VDZ8PCF9YD.com.halfbrick.jetpack is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:06 --- last message repeated 1 time ---
Jan 29 00:45:06 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:07 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.TSTV75T6Q5.com.ea.fifa13.bv is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:07 --- last message repeated 1 time ---
Jan 29 00:45:07 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:08 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.356QY8883U.com.melodis.soundhound.free is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:08 --- last message repeated 1 time ---
Jan 29 00:45:08 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:09 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.VDZ8PCF9YD.com.Halfbrick.FruitNinjaHD is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:09 --- last message repeated 1 time ---
Jan 29 00:45:09 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:10 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.5U8NS4GX82.com.dayoneapp.dayone is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:10 --- last message repeated 1 time ---
Jan 29 00:45:10 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:11 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.iCloud.com.footballaddicts.livescoreaddicts is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:11 --- last message repeated 1 time ---
Jan 29 00:45:11 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:12 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.F855WN583V.com.ninjakiwi.bloonstdbattles is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:13 --- last message repeated 1 time ---
Jan 29 00:45:13 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:14 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.NXRRDMLHBY.com.footballaddicts.livescoreaddicts is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:14 --- last message repeated 1 time ---
Jan 29 00:45:14 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:15 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.com.apple.Numbers is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:15 --- last message repeated 1 time ---
Jan 29 00:45:15 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:16 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.AD8DUAC779.com.hadarporat.radio.israel is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:16 --- last message repeated 1 time ---
Jan 29 00:45:16 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:17 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.TSTV75T6Q5.com.ea.fifa14.bv is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:17 --- last message repeated 1 time ---
Jan 29 00:45:17 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:18 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.XXKJ396S2Y.com.autodesk.SketchBookPro is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:18 --- last message repeated 1 time ---
Jan 29 00:45:18 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:19 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.8Z3V4F58RK.com.ustwo.monumentvalley is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:19 --- last message repeated 1 time ---
Jan 29 00:45:19 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:21 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.com.apple.system.spotlight is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:21 --- last message repeated 1 time ---
Jan 29 00:45:21 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:22 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.Z7B373TW8Q.com.andreasilliger.tinywings is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:22 --- last message repeated 1 time ---
Jan 29 00:45:22 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:23 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.com.apple.Notes is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:23 --- last message repeated 1 time ---
Jan 29 00:45:23 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:24 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.3JJX9QL35J.com.sega.fmhi14 is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:24 --- last message repeated 1 time ---
Jan 29 00:45:24 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:25 ronnies-iMac-8.local nsurlsessiond[5538]: Being asked if container with identifier com.apple.clouddocs.HDE72H7JV2.com.fiftythree.paper is foreground before getting callback from BRContainersMonitor!
Jan 29 00:45:25 --- last message repeated 1 time ---
Jan 29 00:45:25 ronnies-iMac-8.local thermald[22]: invalid attribute or value, default to yes
Jan 29 00:45:55 --- last message repeated 18 times ---
Jan 29 00:48:11 ronnies-iMac-8.local Mail[355]: No worthy mechs found
Jan 29 00:48:47 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:51:17 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf92738960 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:51:17 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb773bb0 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:51:17 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:51:17 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:51:17 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: YES
Jan 29 00:51:17 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: YES
Jan 29 00:51:17 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:51:17 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: NO (Topics: (null))
Jan 29 00:51:17 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf92738960 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:51:17 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:51:17 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: YES
Jan 29 00:51:17 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:53:49 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf924313e0 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:53:49 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb63ec30 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:53:49 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:53:49 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:53:49 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: NO
Jan 29 00:53:49 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: YES (Topics: (
"com.apple.private.alloy.icloudpairing",
"com.apple.private.alloy.continuity.encryption",
"com.apple.private.alloy.continuity.activity",
"com.apple.madrid",
"com.apple.private.ids",
"com.apple.private.alloy.phonecontinuity",
"com.apple.private.alloy.continuity.activity.public",
"com.apple.private.alloy.continuity.auth",
"com.apple.private.alloy.idsremoteurlconnection",
"com.apple.private.alloy.sms",
"com.apple.private.alloy.screensharing",
"com.apple.private.alloy.maps",
"com.apple.private.alloy.callhistorysync",
"com.apple.private.alloy.continuity.tethering"
Jan 29 00:53:49 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: NO
Jan 29 00:53:49 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: YES (Topics: (null))
Jan 29 00:53:49 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf92724670 {name = _NSDoNotDisturbDisabledNotification}
Jan 29 00:53:49 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:53:49 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: NO
Jan 29 00:53:49 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: YES (Topics: (
"com.apple.madrid"
Jan 29 00:54:13 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 00:54:24 ronnies-iMac-8.local iTunes[360]: Entered:_AMMuxedDeviceDisconnected, mux-device:204
Jan 29 00:54:24 ronnies-iMac-8.local iTunes[360]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:204
Jan 29 00:54:24 ronnies-iMac-8.local iTunes[360]: tid:226a2b - Mux ID not found in mapping dictionary
Jan 29 00:54:24 ronnies-iMac-8.local iTunes[360]: tid:226a2b - Can't handle disconnect with invalid ecid
Jan 29 00:54:24 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.auditd[5846]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
Jan 29 00:54:24 ronnies-iMac-8.local auditd[5846]: Auditing enabled
Jan 29 00:54:24 ronnies-iMac-8.local auditd[5846]: Got low space trigger
Jan 29 00:54:24 ronnies-iMac-8.local auditd[5846]: auditd_read_dirs(): all audit log directories over soft limit
Jan 29 00:54:25 ronnies-iMac-8.local ronnie[5850]: audit warning: allsoft
Jan 29 00:54:25 ronnies-iMac-8.local ronnie[5849]: audit warning: soft /var/audit
Jan 29 00:54:25 ronnies-iMac-8.local auditd[5846]: renamed /var/audit/20150128221612.not_terminated to /var/audit/20150128221612.20150128225424
Jan 29 00:54:25 ronnies-iMac-8.local auditd[5846]: New audit file is /var/audit/20150128225424.not_terminated
Jan 29 00:54:25 ronnies-iMac-8.local ronnie[5852]: audit warning: closefile /var/audit/20150128221612.20150128225424
Jan 29 00:55:02 ronnies-iMac-8.local SubmitDiagInfo[376]: The connection to https://radarsubmissions.apple.com/submit could not be created
Jan 29 00:55:02 ronnies-iMac-8.local SubmitDiagInfo[376]: Request object for https://radarsubmissions.apple.com/submit couldn't be created
Jan 29 00:55:02 ronnies-iMac-8.local SubmitDiagInfo[376]: Error while bootstrapping the main Config File
Jan 29 00:55:02 ronnies-iMac-8.local diagnostics_agent[346]: Submission failed
Jan 29 00:55:09 ronnies-iMac-8 kernel[0]: BUG in process suhelperd[5854]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
Jan 29 00:56:01 --- last message repeated 118 times ---
Jan 29 00:58:42 ronnies-iMac-8.local discoveryd[49]: Basic NATTServer Got control URL: http://10.0.0.138:5431//uuid:acf1df9e-1918-1819-9edf-f1acf19e180002/WANPPPConnec tion:1 (ppp)
Jan 29 00:58:42 ronnies-iMac-8.local Mail[355]: No worthy mechs found
Jan 29 00:58:56 ronnies-iMac-8.local WindowServer[106]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7fe0c60cef70(2001)
Jan 29 00:58:56 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: notification observer: com.apple.FaceTime notification: __CFNotification 0x7fdbbb50bf10 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:58:56 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf9241c4a0 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:58:56 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: NC Disabled: NO
Jan 29 00:58:56 ronnies-iMac-8.local WindowServer[106]: device_generate_lock_screen_screenshot: authw 0x0(0)[inf, inf, 0, 0] shield 0x7fe0c60cef70(2001), dev [1920,1080]
Jan 29 00:58:56 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: DND Enabled: YES
Jan 29 00:58:56 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: NC Disabled: NO
Jan 29 00:58:56 ronnies-iMac-8.local imagent[278]: <IMMacNotificationCenterManager: 0x7fdbbb41d5f0>: Updating enabled: NO (Topics: (null))
Jan 29 00:58:56 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: DND Enabled: YES
Jan 29 00:58:56 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf9263f9e0>: Updating enabled: NO (Topics: (null))
Jan 29 00:58:56 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: notification observer: com.apple.iChat notification: __CFNotification 0x7fbf926581c0 {name = _NSDoNotDisturbEnabledNotification}
Jan 29 00:58:56 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: NC Disabled: NO
Jan 29 00:58:56 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: DND Enabled: YES
Jan 29 00:58:56 ronnies-iMac-8.local identityservicesd[268]: <IMMacNotificationCenterManager: 0x7fbf924287f0>: Updating enabled: NO (Topics: (null))
Jan 29 01:00:08 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.auditd[5859]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
Jan 29 01:00:08 ronnies-iMac-8.local auditd[5859]: Auditing enabled
Jan 29 01:00:08 ronnies-iMac-8.local auditd[5859]: Got low space trigger
Jan 29 01:00:08 ronnies-iMac-8.local auditd[5859]: auditd_read_dirs(): all audit log directories over soft limit
Jan 29 01:00:08 ronnies-iMac-8.local auditd[5859]: renamed /var/audit/20150128225424.not_terminated to /var/audit/20150128225424.20150128230008
Jan 29 01:00:08 ronnies-iMac-8.local auditd[5859]: New audit file is /var/audit/20150128230008.not_terminated
Jan 29 01:00:08 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 01:00:08 ronnies-iMac-8.local ronnie[5863]: audit warning: allsoft
Jan 29 01:00:08 ronnies-iMac-8.local ronnie[5865]: audit warning: soft /var/audit
Jan 29 01:00:08 ronnies-iMac-8.local ronnie[5864]: audit warning: closefile /var/audit/20150128225424.20150128230008
Jan 29 01:00:09 ronnies-iMac-8.local AddressBookSourceSync[5857]: [CardDAVPlugin-ERROR] -getPrincipalInfo:[_controller supportsRequestCompressionAtURL:https://gooshi777%[email protected]/carddav/v1/principals/gooshi777%40gmail .com///gooshi777%[email protected]/carddav/v1/principals/gooshi777%40gmail.com/] Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7f8a91d1e040 {CoreDAVHTTPHeaders=<CFBasicHash 0x7f8a91d211a0 [0x7fff79b76cf0]>{type = immutable dict, count = 13,
entries =>
0 : Content-Type = <CFString 0x7f8a91c318d0 [0x7fff79b76cf0]>{contents = "text/html; charset=UTF-8"}
1 : Www-Authenticate = <CFString 0x7f8a91c320c0 [0x7fff79b76cf0]>{contents = "basic realm="Google APIs""}
5 : Content-Encoding = gzip
6 : Server = GSE
7 : x-clienttoken-request = true
8 : x-xss-protection = <CFString 0x7f8a91c25320 [0x7fff79b76cf0]>{contents = "1; mode=block"}
9 : Expires = <CFString 0x7f8a91c2cb10 [0x7fff79b76cf0]>{contents = "Wed, 28 Jan 2015 23:00:09 GMT"}
12 : Cache-Control = <CFString 0x7f8a91c333f0 [0x7fff79b76cf0]>{contents = "private, max-age=0"}
13 : Date = <CFString 0x7f8a91c2c910 [0x7fff79b76cf0]>{contents = "Wed, 28 Jan 2015 23:00:09 GMT"}
15 : Content-Length = 34
19 : x-content-type-options = nosniff
21 : x-frame-options = <CFString 0x7f8a91c00630 [0x7fff79b76cf0]>{contents = "SAMEORIGIN"}
22 : Vary = <CFString 0x7f8a94169b90 [0x7fff79b76cf0]>{contents = "Origin, X-Origin"}
Jan 29 01:00:48 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 01:05:01 ronnies-iMac-8 com.apple.iCloudHelper[5869]: objc[5869]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
Jan 29 01:05:01 ronnies-iMac-8 com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Jan 29 01:06:04 ronnies-iMac-8.local SubmitDiagInfo[376]: The connection to https://radarsubmissions.apple.com/submit could not be created
Jan 29 01:06:04 ronnies-iMac-8.local SubmitDiagInfo[376]: Request object for https://radarsubmissions.apple.com/submit couldn't be created
Jan 29 01:06:04 ronnies-iMac-8.local SubmitDiagInfo[376]: Error while bootstrapping the main Config File
Jan 29 01:06:04 ronnies-iMac-8.local diagnostics_agent[346]: Submission failed
Jan 29 01:08:11 ronnies-iMac-8.local Mail[355]: No worthy mechs found
Jan 29 01:13:42 ronnies-iMac-8.local discoveryd[49]: Basic NATTServer Got control URL: http://10.0.0.138:5431//uuid:acf1df9e-1918-1819-9edf-f1acf19e180002/WANPPPConnec tion:1 (ppp)
Jan 29 01:13:58 ronnies-iMac-8.local com.apple.usbmuxd[52]: _SendAttachNotification Device 64:20:0c:3e:5c:8c@fe80::6620:cff:fe3e:5c8c._apple-mobdev2._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
Jan 29 01:13:58 -
Maybe you are looking for
-
can i add a small watermark or basic text text to the lower right of the picture i.e. Photo:Brad thanks and happy holidays
-
How to complain about an unethical BT cold call?
How can a BT representative have the right to cold call my 81 year old mum and sell her a broadband package when she doesn't have a computer & doesn't even know what the internet is? Where is the moral code? My attempts at sorting it all out have b
-
Upgrade projects and Compare and ajust func.???
Hi All. I am trying setting up a demo of the benefits using SolMan for upgrade projects with Compare and Adjust functionality. I am following a guide with the following steps: 1. Create an Implementation project with some processes from BPR (Using SA
-
What problems can I expect upgrading to Mountain Lion, the products I use most are Photoshop, Dreamweaver and InDesign. I have a student edition so my Photoshop is 12.0.4, I don't know if aI am eligible to upgrade to 5.1
-
I had iTunes9 in my Win/Vista/serv pack 2 and it was malfunctioning badly. Would not grant me access at all. I've got new password etc. but can't download 10.4.1 (64 bit) on my new ASUS laptop. It has 500GB of RAM, intel Pentium core 13 processor, Wi