P67A-GD65 gets sometimes gets stuck on boot status code 98 until i turn of main

Hi,
I have a issue which seems to be more recurring over time - it simply gets stuck on the first status code screen, it continues to do it until I power down system by mains for 10 secs.
To start with I'd say only once a month but now about once a week.
The usual boot status codes read "98 B4 98 94"  and when the problem occurs it just gets stuck on the first 1.
To quote another forum member
Quote
0x92 PCI Bus initialization is started
0x93 PCI Bus Hot Plug Controller Initialization
0x94 PCI Bus Enumeration
0x95 PCI Bus Request Resources
0x96 PCI Bus Assign Resources
0x97 Console Output devices connect
0x98 Console input devices connect
0x99 Super IO Initialization
0x9A USB initialization is started
0x9B USB Reset
0x9C USB Detect
0x9D USB Enable
From what I've read it seems to be down to imput devices, I have logitech mx518 and g15 keyboard which previously had a problem that was fixed 2 BIOS updates ago (which may well have been when this started)
Here's a couple of threads I found of simular problems
Code: [Select]
https://forum-en.msi.com/index.php?topic=151778.0
https://forum-en.msi.com/index.php?topic=145195.0
https://forum-en.msi.com/index.php?topic=147690.0
https://forum-en.msi.com/index.php?topic=152005.0 
Would love to hear from some others because I don't know what to do about it really with it being quite rare it's hard to test possible causes/fixes.
Thanks.

 pH0tr0N, please start your own new topic regarding your problem.
  >> Please read and comply with the Forum Rules <<
  >> Posting Guide <<
 I don't really know as I have the as shipped BIOS 1.9 on mine and only problem I have is my mouse doesn't work in BIOS and since mice never worked in BIOS before these new MB's it's nothing I'm concerned about. It seems every new BIOS fixes one thing and then another problem crops up for other people so I'm sticking with the no mouse and no other problems BIOS 1.9. The only BIOS's I understand that have had the fewest problems for most people have been 1.9 & 1.C. Mines goes through POST so fast I can't even read anything as it flashes by everything in just a few seconds and goes to loading Windows.
 Unplugging the USB devices was just a suggestion for test purposes not a work around for the problem.

Similar Messages

  • Async call gets stuck with pending status

    Hi,
    I am working on Tasklayer where need to invoke Async. call, the .bpel file has Invoke activity and below that it has pick activity with branches one for OnMessage and another is also OnMessage but, this is for fault. Now, when it invokes the Async. what i see in the instance is that the OnMessage activity gets stuck in Pending status, it doesn't proceed further. Kindly let me know if any one has faced similar issue.
    Thanks & Regards,
    Sanjay

    Hi Sanjay,
    you are saying that u r calling an asyc process.
    So as an async process do not send the response back to parent through same port, you have to send the fault back to parent by invoking it(parent).
    Here you can send the fault by using existing callback port otherwise you can define separate port for fault can send through that(you have to do it in WSDL).
    So here for the first case no need to have the pick as u r getting both success and fault through same port. If you are going for separate one you have to have pick(one for success and other for faulted one)
    So as Steven said you have to have a catch and invoke to send the fault back to parent.
    Regards
    PavanKumar.M

  • HT1414 forgot iphone 4 passcode  and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!

    I forgot iphone 4 passcode  and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • Late 2007 Intel iMac getting stuck at boot...sometimes.

    I'll go into as much detail here as I can, but feel free to ask questions. This is:
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.8 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 4 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4
    I rarely shut this computer off, and for the most part it runs fine, but when I do shut it down or Restart, whether it boots again or not is a gamble. I have backups, so I'm not concerned about losing data, just concerned by the instability. There's no boot camp or strange partitioning. Just a single partition "Macintosh HD" that the system boots from.
    Here are the tests I've run:
    1) Built in hardware test. I've had it hang while "probing hardware",
    but once I run the extended tests, it always passes.
    2) Disk Utility. I've verified the disk and repaired it, occasionally
    I get an error, but it's always been fixable, and the last test I ran
    said the HD seemed to be okay. I've also repaired the permissions several
    times. There are a couple of "Warning: SUID file 'bleh' has been modified and
    will not be repaired." warnings.
    3) Reset the SMC controller, by disconnecting all the cables including power
    and letting it sit for 30 minutes -- several times.
    4) Done the Command-Option-P-R reset several times.
    5) S.M.A.R.T. indicates nothing wrong with the drive.
    When things go bad, there are several ways it happens.
    1) Sometimes I get the grey screen, no apple or wheel. Just sits at the grey
    screen forever.
    2) After a couple of reboots, I'll usually get to the apple logo and wheel, but it
    stays there forever.
    3) After 10 or 20 reboots, I can usually get it to go all the way through
    and start up.
    Sometimes when I can get it to boot from the Install DVD, the physical harddrive is listed in the Disk Utility but not the "Macintosh HD" partition, so I can't check or repair it.
    I have thought that this might be heat related, maybe it works better as it heats up, but this doesn't explain the inability to just restart it when it's been running for a week.
    What does this sound like to you? I have to admit that I'm stumped, and since I don't really have a good grasp on what's going on at each stage of the boot sequence, I can't narrow it down to one thing or another. I guess worst case I'll take it in to the "Geniuses" at the Apple Store, but I'd like to understand exactly what's going on here.
    Any help would be....helpful.

    I've had totally mixed luck with hard drives in the past. I had a drive fail on me after 1 month and another last for the last 10 years. I'm not upset, assuming it doesn't happen again in 2 years.
    Personally, I think the heat inside the iMac makes it a little harder on the drive, which might accelerate it's life. Once it started to go I installed "iMac Fan Control" (just google it) to keep the heat down. No idea if it milked a little more life out of it or not, but I think I'll keep running it.
    Ian

  • Help - G5 gets stuck at boot

    G5 continues to get stuck at:
    DART enabled
    There is no hardware issue that I can tell. I fear my boot loader has been corrupted however, I am not expert and hope some of you may share some light on the subject.
    I can't boot into CD either selecting from the options screen it gets stuck as above.
    I am running Darwin Kernel Version 9.8.0
    Thanks!

    Here the full screen output at boot and where it gets stuck:
    *Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1229.15.4~1/RELEASE_PPC*
    *standard timeslicing quantum is 10000 us*
    *vmpagebootstrap: 1020225 free pages and 28351 wired pages*
    *migtable_maxdispl = 79*
    *103 prelinked modules*
    *Loading security extensions com.apple.security.TMSafetyNet*
    *calling mpopolicyinit for TMSafetyNet*
    *Security policy loaded: Safety net for Time Machine (TMSafetyNet)*
    *Loading security extension com.apple.nke.applicaitonfirewall*
    *Loading security extention com.apple.security.seatbelt*
    *calling mpopolicyinit for mb*
    *Seatbelt MACF policy initialized*
    *Security policy loaded: Seatbelt Policy (mb)*
    *Copyright (c) 1982, 1989, 1991, 1993*
    *The Regents of the University of California. All rights reserved.*
    *MAC Framework succesfully initialized*
    *using 16384 buffer headers and 4096 cluster IO buffer headers*
    *Airport_Brcm43xx::probe: 050b6000, 0*
    *DART enabled*

  • Q10 switches off when power button pushed once and gets stuck in boot up loop

    Hi All
    All of a sudden my Q10 power button has become sensitive and restarts when pushed once.  When it tries to restart it gets stuck in the boot loop - going from red light to BlackBerry logo, back to red light.... If I push the power button a few times it will boot up.  
    I have tried to reload the most actual 10.3 software but problem still exists.
    Any ideas?  Oh and its JUST gone out of warranty.....
    Is it a power button issue or something more serious?

    Sounds like button. I'm assuming that is one way they can fail. I don't know for sure. What I usually read about button problems is the button doesn't work at all.
    The issues could with the 10.3.1 upgrade complicates guesswork. How did you reload the OS? If you did a clean install with an autoloader then I would say you did what you could do to rule out software.
    - Ira

  • My Adobe premier CS6 get stuck when booting

    When loading premier get stuck at the point where it shows on the premier  "loading - exporterquicktimehost.bundle". How can I fix this?

    Quicktime errors http://forums.adobe.com/message/4545437
    ExporterQuickTimeHost QT Version http://forums.adobe.com/thread/1109614

  • P67A-GD65 (B3) - How to configure 3TB boot drive with W7 64bit

    Hi,
    I want to use my Deskstar 7K3000 3TB as boot drive for Windows 7 64 OS but every attempt i have made only gives me 2TB space even when I make the disk GPT partition  .
    Can anyone give step-by-step instructions on how to set up the MB Bios and also the HD so that I get full use.?
    MSI P67A-GD65 (B3)
    Intel Core i7-2600K
    2 x  2GB Mushkin PC3-10700H
    NVIDIA GTX 570
    Any ideas would be most appreciated
    Ta.!

    I believe a BIOS update to the latest version is needed. If like the one board I have, Infinity 2.2 (or something like that) had to be a BIOS option.

  • HELP! My 2011 MSI P67A-GD65 (B3) build suddenly refuses to boot

    Hello, I am new to this forum because I hadn't had any troubles yet.
    I built my system in July/August 2011. Here's what it has:
    MSI P67A-GD65 (B3)
    Intel Core i7-2600K Sandy Bridge CPU
    16GB Corsair Vengeance 240-pin DDR3 1600
    650w Corsair Enthusiast PSU
    MSI N460GTX Cyclone 1GD5/OC GeForce Graphics Card
    1x 2TB Hitachi 7K3000 7200RPM SATA 6 GB/s (With Windows 7 64-bit installed)
    2x 3TB Seagate 7200RPM SATA 6 GB/s (For storage)
    I have used this computer for graphics and video editing...it has served me faithfully. Yesterday evening while editing a Word document, I got "do you want to save your changes before exiting?" and of course I said yes. Then to my surprise my computer proceeded to shut down and reboot. At first I thought maybe I missed a Windows Update message telling me it would reboot in xxx minutes so I was not alarmed. But then as I watched it reboot, it gave me the POST message that there was no disc drive recognized. I thought that was weird since I never noticed it before. But then after the BIOS screen with the MSI graphics thing I was faced with a blank screen except for a flashing cursor two inches from the top of the screen. When I realized that this wasn't going to leave, I got a bit worried so I did a reset through my tower's button and same thing happened...I unplugged everything and let it sit for a few minutes... restarted 10 minutes later....same thing. Did it again and then went into my BIOS to look around. It showed no HDD's connected and I had 3 hooked up. I was concerned my HDD went bad so I connected it to another pc and accessed it with no trouble as another storage...I was happy my files are all there. So then I reconnected to my original build and got the same POST message, but this time the drives were visible in BIOS....but still no boot.
    I have another blank SATA HDD so I removed all my HDD's and connected it by itself along with my SATA DVD drive and I tried to do a clean Win7 install on it. But at the point in the install process where it asks WHERE you want to install Windows, no drives showed up. So that door was closed. I tried the same thing again after swapping SATA port locations, thinking 1 was defective, but I got the same treatment from all of them...nothing recognized during the install process, although the drives are showing up in BIOS....
    I think I know why the POST message is saying 'no drives detected,' though...I read it is saying that based on the SATA ports being used...I have 8 SATA's on my MOBO...4 6gb/s; 4 3gb/s. 7-8 are 6gb/s and ONLY when I have a HDD plugged into one of them does it show on the POST screen...which I still think is weird, and seems to have just started happening last night with the rest of the problems...but I could live with that since I could disable the message in BIOS I think.
    But I have tried to clear the CMOS...all three ways...jumper, button, battery. I reset BIOS thru BIOS.... Nothing changes. BTW, in BIOS I ran a RAM memory check and it passed. Besides, I am not hearing any weird beeps...related to that....
    I don't know why this would happen after working perfectly for 2 years... And why would it politely shut down in the beginning of the process anyways? I mean...I appreciated being asked to save my changes...but I don't know what else to do...PLEASE OFFER SUGGESTIONS...any help is appreciated.
    Thank you in advance...I hope someone can help me! I am still covered by warranty...but I want to do this right.
    Thanks!
    Marie
    EDIT: BTW, I have also tried unplugging everything from the pc except for the DVI and power plug in case that was interferring....

    Quote
    On a slightly different topic...would it work (I have never done this!) to take my OS HDD and boot it on another PC? I am thinking this would not work because of system files and etc., but I have always wondered this and now would be the best time for me to know
    It mostly works if the components used aren't too special. As you have no RAID setup it should work. However you will need to reactivate Windows once it made it. Of course you will also need all drivers for the new machine. Be aware that you might not be able to connect to the internet before you installed the proper driver for the ethernet adapter.

  • My wife's iphone 3gs gets stuck on boot logo screen sometimes with a loading circle.

    I have tried holding power and home buttons to restart.  Problem persists. 
    I have also updated software.  Problem persists.
    I have done a backup then a restore.  It worked normally for a few hours then the problem returned. 
    None of the youtube videos or the advice on the web has helped so far.
    Any help is appreciated.

    I should add that I have an Iphone 4 and Itunes has no problem finding and synching my device.   

  • Getting stuck at boot

    I tried to add something into rc.local (esd something), I guess I forgot the & because now it just freezes at that point. 
    I deleted the safe boot option out of LILO, would that have helped this?

    That's a FAQ. The program is, as you correctly gathered, running in foreground. This also means, however, that you can send it a SIGINT with CTRL-C and kill it that way. If SIGINT is captured, try CTRL-D, CTRL-U, CTRL-Z and CTRL-X. One of 'em ought to get you further.

  • Cloned volume gets stuck at boot "Waiting for Network File System"

    I've used "Carbon Copy Cloner" many times with success and no problems (v 2.3 , default settings, make destination bootable) as I migrated to larger drives or make backups in advance of a major OS upgrade.
    Last time I was successful, I was at OS 10.3.5. I use 3rd drive to boot my Mac, then clone the one non-boot drive to the other. I do the disk repairs & permission repairs as the normal course of this process, before & after. I am now at 10.3.9. I am do this clone in prep to go to 10.4 so I have a good back in the event of later problems.
    When I attempt to boot from the newly cloned partition, it goes fine on the boot process until it hangs at the "Waiting for Network File System" step and never gets past there. I've never had this happen before. I retired all the steps, even ran "Diskwarrier", but no change.
    I am not trying to run from a remote or network drive, just a 2nd drive in my
    G4 from which I have previously been able to boot (until this last clone attempt that is).
    I googled the symptoms ""Waiting for Network File System"", found it to be common, but no real answers. Is this one of those annoying UNIX things? Any ideas how to fix / turn-off whatever is hanging the boot up? Thanks in advance!

    Hi Kool,
    So there seems to be a "speed-bump" around 10.3.9. No wonder I have had the same results with a different tint. I went to Drive Genius to clone this one. Results with that were interesting.
    If I did a [Device] clone, it would take and show at start with 'option' key... and work just like my internal with 3 accounts on it... login and proceed like it was internal. If I did a [Volume] clone, it would not show up at start with the 'option' key... I'd have to boot it from System Preferences > Start-up Drive. Once booted, it had no login screen so all the files were accessible. I took the clone of this 3 account PB and tried it on an iBook. Had to boot from System Preferences too, also, all the account were accessible from that machine... implying that anyone who had that drive could get past/into my files that would be secure on my computer, but not on the clone. If I took the [Device] clone and booted from the ibook at start with the option key, it would not get past the login screen... altho the mouse worked and I could click on the name, that was as far as it got, Froze.
    So, I have figured, for safety, a [Device] clone is it, as long as the original computer lives. The safety features for login seem to be hardwired in the chip that the clone was made from (The iBook had 2 accounts but not my 3). If safety is not an issue, the [Volume] clone is fine... like moving to a newer OS on the same computer. It would seem from your experimentations that the situations with this 10.3.9 is just a hick-up and is solved in 10.4.3 with CCC v3...
    Thanks for your info... I am thinking of going to Tiger, but I am so fond of this Panther...
    Bo

  • Nomad JukeBox3 gets stuck upon booting

    I have a Nomad Jukebox 3 with the latest firmware that recently stopped playing in the middle of a song. None of the function buttons worked; the unit was frozen. After pressing the reset button, it reboots where I can see the Creative logo and EAX logo screens then it freezes on the bitmap screen. Tried rebooting and connecting to PC many Xs without success. Worked perfectly for over 3 years.
    Can anyone suggest a solution?
    Thanks.
    K ManMessage Edited by kaflax on 02-06-2006 08:2 PM

    take out the batteries, leave it for some time and then put back the batteries and hope for the best...
    otherwise I just guess it'ss getting old...
    PS: would love a ZEN with integrated camera... why don?t they bring nothing like that on the market? 30GB would be enough for mp3s and some pics..

  • Messages getting stuck in Delivering status in AE

    Hi all,
    Recently we are coming across messages that go into Delivering status. These messages mostly belong to File Sender/Receiver Adapter but not confined to them. Here is the audit log of one such message:
    2011-03-21 10:01:55 Success Write to file "/usr/sap/ZX2/EXT/XI_INTERFACES/SCP2PIF016/NOT_PROCESSED/goodsReceiptPosting_InvalidRecords20110321-100155-650.xml" as binary, size 1949 bytes
    2011-03-21 10:01:55 Success File processing complete
    2011-03-21 10:01:55 Success MP: Leaving module processor
    2011-03-21 10:01:55 Success The message was successfully delivered to the application using connection File_http://sap.com/xi/XI/System.
    2011-03-21 10:01:55 Error Setting the message status to DLNG failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
    On searching in SDN I found one work around-- to restart Messaging Service in Visual Admin. This did work as the messages got processed after that. But, the problem seems to be recurring now(once in every two days).
    Can any body shed some light on this to find the permanent fix?
    Thanks a lot,
    Gokul.

    Hi,
    Make sure you have set the MaxThreadCount parameter to 350 or higher depending of the case and of the resources available.
    To increase the parameter, please follow the instructions below:
    1. In the left frame choose Server -> Kernel -> ApplicationThreadManager
    2. In the tab Display Configuration (right frame) choose Switch between view and edit mode to activate the edit mode.
    3. The parameter MaxThreadCount must be set to 350.
    4. You will then need to restart the J2ee
    For reference see note #937159 - XI Adapter Engine is stuck
    For specific setting to an adapter can be done by going to the Visual Administrator -> Services -> SAP XI AF Messaging
    Look at the property 'Messaging connections' here you will see the following queues:
    Send.maxConsumers (asynchronous sending - outbound)
    Recv.maxConsumers (asynchronous receipt - inbound)
    Call.maxConsumers (synchronous sending - outbound)
    Rqst.maxConsumers (synchronous receipt - inbound)
    Depending on where the bottleneck is occurring (i.e. too many entries in the Send.maxConsumers) you can increase these parameters.
    Example of parameter value syntax (sample for FILE adapter):
    (name=FILE_http://sap.com/xi/XI/System, Send.maxConsumers=10, Recv.maxConsumers=10, Call.maxConsumers=10, Rqst.maxConsumers=10)
    For reference see note:
    #791655 - Documentation of the XI Messaging System Service Properties
    And see the link:
    /people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
    Regards,
    Caio Cagnani

  • MOVED: HELP! My 2011 MSI P67A-GD65 (B3) build suddenly refuses to boot

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=171555.0

    Quote
    On a slightly different topic...would it work (I have never done this!) to take my OS HDD and boot it on another PC? I am thinking this would not work because of system files and etc., but I have always wondered this and now would be the best time for me to know
    It mostly works if the components used aren't too special. As you have no RAID setup it should work. However you will need to reactivate Windows once it made it. Of course you will also need all drivers for the new machine. Be aware that you might not be able to connect to the internet before you installed the proper driver for the ethernet adapter.

Maybe you are looking for