Code help for Custom extensuion in WAD for IF_BICS_CONS_WEBITEM_CUST_EXIT

Hello Experts,
We have a requirement to display individual graphs for top 5 customers from over all TOP 5 performace Graph. I want to use the webitem Custom extension in WAD. I have seen some posts on this.
Can anyone please help in writing code for the above requirement using the inteeface IF_BICS_CONS_WEBITEM_CUST_EXIT .
I want to derive top 1 , 2 , 3, 4 and 5 form a single data provider. Please put some light on this.
Regards,
Shashi

Hi,
into your modify view,
extract data you need in your search help in an itab (do it into a class do not perform select directly into modify view) and then bind it as value help to your WD element.
Regards,
Ivan

Similar Messages

Entries in BSID for customerA is more than for Customer B.

Hi SDNers,
In case of CustomerA, no of entries fetched from BSID is 246709 .
Because of this a standard piece of code takes a looong time to execute.
In case of Customer B, no of entries fetched from BSID is just 512.
Because of this less entries standard code executes faster.
Please suggest if some things can be deleted or cleaned up for this customer A from the table BSID.
What should be the steps taken to reduce the time of execution.
since this is a standard code, i cannot make changes too.
Please suggest.
How can we clear up so many entries from BSID?
Can archiving be done?
or deletion?
what steps needs to be done to reduce the entries for CustomerA in table BSID.
Please suggest.
Regards,
SuryaD.
Edited by: SuryaD on Dec 8, 2009 7:27 PM

This would be a basis related job of deleting.
No, it's not, unless you have performed clearing as Rob suggested. You will need your FI configurator (or someone who knows how to perform the IMG step) to specify the clearing criteria by customer account number range. Be sure that the criteria are accurate for your business needs so the documents clear properly. Then you will run one of the SAPF124* programs to clear the documents on a regular basis.
You can't archive open items. Once the items are cleared and moved to BSAD though, you can archive them IF they meet the criteria (as specified in SARA). There is a post-processing step to remove the secondary index table entries. You may or may not elect to run this as well. Without a good archive imaging system, we elect to NOT run the secondary index clean up - this allows the main entries to be deleted but auditors, accountants, and reports can still generate some details and have some visibility in the FBL*N transactions.

Looking for Customer Collateralson Local Government for Financial Mgmt

Hi. I am actually asssisting my manager to look for customer references particularly from eBusiness Suite which related to local government or municipal council. I am actually in CX, so I may not be familiar with the Financial Mgmt offering from EBZ. This opportunity I am currently covering is interested to know the solutions below which I have tried to map out with the products offered under EBZ
Credit-to-Cash > Oracle Receivables
Procure-to-Pay > Oracle Payables
Financial Control and Reporting > Oracle General Ledger
Financial Control and Reporting > Oracle Hyperion Financial Management
Cash and Treasury Management > Oracle Cash Management
Budgeting > Oracle Hyperion Public Sector Planning and Budgeting
Procurement > Oracle Advanced Procurement
Contracts > ???
Project Accounting > Oracle Projects with Oracle Sub-ledger Accounting
Investments > ???
Most importantly, I am trying to find reference to local government who have used the products above. Appreciate if anyone can throw me some information/lead. Preferably around the ASEAN region primarily Malaysia and Singapore.

You should contact the Oracle sales folks in your city / country - they should be able to get you connected with any references.
http://www.oracle.com/us/products/applications/ebusiness/ebs-r12-1-booklet-sept-2011-1355209.pdf
HTH
Srini

Help with custom page size support for non standard paper

Firstly, we appreciate any support you may be able to provide, we have already thrown considerable effort at this and it has been very time consuming and frustrating.
To support a number of business functions need to print to (non standard) continuous and mulitpart paper on a dot matrix printer. The (test) Mac is a 10.4.11 G4 laptop, the printer is an Oki Microline 520 (9 pin 80 column, IBM Proprinter, Microline or Epson FX personalities with a parallel interface) which has been networked via a HP JetDirext Ex Plus print server. That part appears to be operating correctly.
We have tried a number of drivers / printer personalities with varying levels of success:
ESP / EPSON 9-Pin Series CUPS v1.1 / Epson FX personality
ESP / OKIDATA 9-Pin Series CUPS v1.1 / Oki Microline personality
Ghostscript / epsonc / Epson Dot Matrix Foomatic PPD / Epson FX personality
Ghostscript / ibmpro / IBM ProPrinterII Foomatic PPD / IBM Proprinter personality
Ghostscript / okiibm / Oki Microline IBM compatible 9 pin Foomatic PPD / IBM Proprinter personality
There were no appropriate drivers in Gutenprint (5.2.3 version) The most successful is the okiibm / Oki Microline IBM compatible 9 pin settings, it can print A4 and honors the Printer Features Resolution settings in the print dialogue.
Q1: Should we see anything in the Printer Info / Installable Option, it is always blank ?
The issue is custom page sizes, we can manage / add Custom Pages Sizes via the Page Setup / Paper Size interface and they draw on the screen OK but they do not work at the printer (various issue at the printer such error messages, junk printing and wrong orientation):
Q2: Are we heading in the right direction or is there a better way to handle this ?
Q3: Would 10.5 solve all our problems, are the print drivers any better ?
Q4: Is this the correct way to specify custom page sizes, is this all we need to do ?
Q5: Is so how do we get the driver to respect the size, do we need another filter or something ?
Q6: Is it possible to add (by hand) custom page sizes to the ESP drivers or Foomatic PPD files so they they appear as a "standard" offering in the Page Setup / Paper Size interface ?
Sorry for the long / complicated post and thanks in advance for any advice / assistance.

Matt Broughton wrote:
Testing on 10.5.7, Tried both Oki 9-Pin Series 1.3 / Microline personality (no joy) and Epson 9-Pin Series 1.3 (this is a much better driver than 1.1) / Epson FX personality but not much joy with custom page sizes,
The Oki 9-pin Series 1.3 and the Epson 9-Pin Series 1.3 should produce the same results. The only difference in the PPDs is the printer model name.
After some testing, I find that the output is not the same despite the two PPDs being virtually identical. I did spot in the CUPS source code for the rastertoepson filter that there is some model name matching for Epson printers. Thus I can see where the output using the Oki 9-pin PPD could be different than when using the Epson 9-pin PPD.
but again once I imbedded the page size into the ppd some (but frustrating) luck. I can get it to respect the paper orientation and it prints well but I could not get the form length to work properly. At best over a print run of 7 labels it would creep up the label by about 0.1 inches / 2 mm.
Just for the fun of it, I made some additions to the Epson 9-pin 1.3 PPD. All I can say is that I could print a job to file. I have no way to know what it would look like on paper.
I did find that using a custom paper size did add some unwanted margins to the output bounding box. Putting the custom page size into the PPD seemed to get around that issue.
I added the following lines to the Epson 9-pin PPD 1.3--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*PaperDimension Label1/Label1: "288.00 107.80"</pre>
This adds a paper size with the 4 inch (288pt) width and 1.5 inch (107.8pt) height. That represents the 1.4 inch label and the 0.1 inch gap between labels. I set 0pt margins except for the bottom where is set the 0.1 inch (7pt) gap as the bottom margin.
The full diff in context is--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">loki:~ matt$ diff -u /usr/share/cups/model/epson9.ppd ~/Desktop/epson9.ppd
--- /usr/share/cups/model/epson9.ppd 2009-02-20 20:16:53.000000000 -0600
+++ /Users/matt/Desktop/epson9.ppd 2009-06-06 20:37:06.000000000 -0500
@@ -42,6 +42,7 @@
*PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageSize FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageSize
*OpenUI *PageRegion/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageRegion
@@ -50,17 +51,20 @@
*PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageRegion FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageRegion
*DefaultImageableArea: Letter
*ImageableArea Letter/US Letter: "18.00 18.00 594.00 774.00"
*ImageableArea Legal/US Legal: "18.00 18.00 594.00 990.00"
*ImageableArea A4/A4: "18.00 18.00 577.00 824.00"
*ImageableArea FanFoldUS/US Fanfold: "18.00 18.00 1053.00 774.00"
+*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*DefaultPaperDimension: Letter
*PaperDimension Letter/US Letter: "612.00 792.00"
*PaperDimension Legal/US Legal: "612.00 1008.00"
*PaperDimension A4/A4: "595.00 842.00"
*PaperDimension FanFoldUS/US Fanfold: "1071.00 792.00"
+*PaperDimension Label1/Label1: "288.00 107.80"
*MaxMediaWidth: "1080.00"
*MaxMediaHeight: "86400.00"
*HWMargins: 18.00 18.00 18.00 18.00</pre>
I don't know if that will help you or not. Let us know what sort of progress you make.
Matt

BADI for Customer's own screen for Purchase Requisition.

Hi All,
I have a requirement where I need to create a BADI implementation for creating addition screens in the Purchase Requisition Transaction (ME51n/ME52n/ME53n).
I know there are User exits but we donu2019t want to implement them. Now in case of PO there is a standard SAP given BADI -> ME_GUI_PO_CUST for Customeru2019s own screen but as far as my understanding goes there are no such BADIs for Purchase Requisition.
Could anyone please advice if I can create a Custom BADI similar to ME_GUI_PO_CUST for PR for adding the screen and throw some light on it like how can this be achieved?
Thanks,
Ameesha

Thanks Darek for replying back and the BADI ME_BAPI_PR_CUST looks helpful but could you please help me in understanding how can i create my own custom screens within ME51N / ME52N / ME53N tcode using the BADI , ME_BAPI_PR_CUST.
For example in PO, we have the BADI ME_GUI_PO_CUST, with several methods like SUBSCRIBE and others which we can make use of for creating screen exits but what in the case of PR fpr BADI ME_BAPI_PR_CUST. i couldn't find any sample code for implementing this.
Any help is greatly appreciated.
Thanks,
Ameesha

SAP HANA Cloud Portal : Configuration of HCP with Cloud For Customer

Hi Experts,
In our organization we have C4C system we have requirement to configuration with SAP HANA cloud Portal.
1) What are the steps require in Cloud For Customer?
2) What are the steps require to access the HANA Cloud Portal and Configure it?
3) How to integrate Cloud For Customer with HCP?
4) How to create Websites and Add the Widget for Tickets and Service request created from cloud for customer?
Any Documentation for this Cloud For Customer and HANA Cloud Portal Configuration please share with me.
Many Thanks,
Mithun

hi,
Please find below the avilable public information about Support site edition -
Support Site Overview : http://scn.sap.com/docs/DOC-50078
Support Site (blog post)http://scn.sap.com/community/hana-cloud-portal/blog/2013/12/12/deliver-exceptional-customer-service-with-cloud-based-support-portal
CAC Admin guide - (search for configuring portal) - http://help.sap.com/saphelp_sapcloudforcustomer/en/PDF/EN-2.pdf
Cloud Portal configuration guide - SAP Mobile Documents
Soon we will put all public guides in a central location.
Thanks,
Inbal

Tell us your story with SAP Cloud for Customer!

Check out the Bluefin story on their experiences with SAP Cloud for Customer below:
Bluefin Solutions was one of the earliest adopters of SAP Cloud for Customer which is used for lead and opportunity management. This presentation will share experiences and tips from a a rapid, agile implementation.

Hi Srivatsava,
I am getting the error while creating the Group under the SAP Cloud Opportunity
Sales - > Opportunity -> Group Tab -> Create New Group
Kindly check the below screen for same.
can you please help me what step require to solve this issue.
Waiting for you response.
Many Thanks
Mithun

CTI Integration with SAP Cloud for Customer

HI,
Can some one help me how to connect cti with sap cloud for customer.

Hey Achyut,
Cloud for Customer supports CTI and their is an official document for the same as well.
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000101184&_SCENARIO=01100035870000000202&_OBJECT=011000358…
You can find related docs on service.sap.com/cloud4customer
Thanks,
Ravi

Solution Manager for custom application

Hi all,
I would like to know how Solution Manager can be used as a support for custom development projects.
For example, does SM support the adoption of Scrum?
How can I use it to keep track of development tasks shared by developers?
Does it support UML or other software design tools?
Thanks, regards
Vincenzo

>
VINCENZO TURCO wrote:
> Hi all,
> I would like to know how Solution Manager can be used as a support for custom development projects.
> For example, does SM support the adoption of Scrum?
> How can I use it to keep track of development tasks shared by developers?
> Does it support UML or other software design tools?
>
> Thanks, regards
> Vincenzo
Hello Vincenzo,
For Development Projects, Solution Manager follows the ASAP methodology for implementing a SAP Solution. This method can also be adopted for your own Custom Development Projects.
Whether Solution Manager Support SCRUM, Well to a extent yes as the implementation project has different phases and milestones. However there isnt a 1 to 1 match.
How do you keep track of the shared tasks by developers. You have a roboust Change Management Module built in Solution manager which can be used.
At the moment Solution Manager can be integrated with the development workbenches for SAP ABAP and SAP JAVA. You might have to work around it a bit to Integrate any other Design tools.
Hope that this answers your query.
Regards
Amit

Sales target for customer

What are the setting for fixing sales target for Customer and then comparison for planned verses actual?

HI Ashwini,
Do analysis in sale order condition tab on what basis both condition records are being picked,check the validity periods of condition records.
Ram

Installation Nightmare and no help from customer service

I just spent July 2, 3, 5 from 11a-6p and Saturday July 6 from 8-2 waiting for installation of my fios service in my new apartment. When i called them to let them know I was moving they insisted it was available at my new location. When the tech got there at 2 on 7/2, the wiring was not done in the apartment and they needed the help of another type of guy who works for a sub contractor. They called that tech, who said he was coming by the end of the day and he never showed up. This happened again on Wednesday and Thursday. I spent three days of my summer vacation in my house with three kids waiting for someone who had no intention of coming. I called customer service three times and finally got a supervisor on Saturday am who told me they could not tell me if that outside contractor was ever going to show up. They apologized, but thats it. I asked to cancel my service and they were shocked. I had no service anyway. So they transfer me to a relief agent, who was also sympathetic, but told me the chances of the outside contractor showing up were slim and none and that they could schedule me for the end of the following week. That would make it two weeks with no phone/internet/tv but even worse, my vacation was over. I can't even describe how upset I am about losing precious time with my three small children. They finally showed up as I was walking out the door with the three kids to go to the beach and they came walking in. I have not received any kind of help from customer service other than for them to tell me they have no control over their subcontrator. I don't know what to say other than it was a total nightmare. For what I pay for service for the past five years I expected a lot more of them

Ihotka, if you have a problem w/QT's refund process you should post your concerns over @ QuickTime Feedback.

Search Help for Custom field in Sourcing Cockpit

Hi SRM Experts,
I added custom field "rush order" in the Structures as per requirement. I added code in MODIFY_SCREEN function module. Search help is working for "rush order" in Process Purchase Orders (to search PO) and Check Status (Searching Shopping Cart). But it is not working in sourcing cockpit. Please guide or suggest me is there any additional settings or programming is required to have search help for custom fields in Sourcing Cockpit.
Thanks a lot in advance.
Thanks,
Koyya

Hi SRM Experts,
Please let me know any suggestion on this issue.
Thanks a lot in advance.
Thanks,
Koyya

ABAP Help for customer exit

Hi All, I need help with ABAP code for customer exit for formula variable. I have ZVKDATE as formula var from customer exit. user enters date in ZVKEYDT(this is selection type var). I have the below code, I debugged it the l_var_range-low get the date but when I append it to e_t_range the table doesn't gets the date. The report shows the ZVKDATE has empty demarcation. kindly help.
data l_var_range like rrrangeexit.
data: l_s_range type RSR_s_RANGESID.
data: w_day(2) type c,
      w_mth(2) type c,
      w_year(4) type c.
define append_range_table.
l_s_range-low = &1.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
append l_s_range to e_t_range.
end-of-definition.
*Activities performed before selection screen pop-up window
if i_step = 2.
Calculate the current date based on system date
case i_vnam.
    when 'ZVKDATE'.
      read table i_t_var_range into l_var_range
                        with key vnam = 'ZVKEYDAT'.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      w_day = l_var_range-low+6(2).
      w_mth = l_var_range-low+4(2).
      w_year = l_var_range-low(4).
      concatenate w_year w_mth w_day into l_var_range-low.
      append l_s_range to e_t_range.
endcase.
endif.
puneet

Hi,
Check your code again. You are not appending l_var_range but l_s_range. Also I think the concatenate statement should contain l_s_range-low instead of l_var_range-low.
Hope this will help you.
Regards,
Vaibhav

Help Needed: Enable local currency for Customer Invoicing

We are needing to enable local currency for customer invoicing on a project coming very soon. Does anyone have any information on the best way to get this done and/or documentation to look over? Any help would be greatly appreciated!!
Thank You in Advance!
Jay Esparza
SAP Functional Consultant

Hi
Local currency automatically gets activated as you set your company code currency.
No need to enable separately for customer invoicing
Plz assign points if it is helpful.
Regards
Tapan

Code help for Custom extensuion in WAD for IF_BICS_CONS_WEBITEM_CUST_EXIT

Similar Messages

Maybe you are looking for