Code to Close An Open Document

What would be the code in the following Javascript, to close the pdf document? I'm trying to open a document (which I can do), read from it, then close it (which I haven't been able to do). Is it possible to open the document, keeping it hidden, read from it and then close it?
I'm using adobe pro 8.
==============================================================================
var otherDoc = app.openDoc("myDoc.pdf"); <----------- this opens the document, but I'd like it to stay hidden, is it possible?
[Code to close myDoc.pdf ???????] <------------ code to close the document ????

Still didn't work.
I’m trying to open a document using Javascript, keep it from being viewed, read from it, then close the document. The code below should open a document, then close it. It opens the document, but does not close it. Instead it generates the error message below. I’m using Adobe pro 8. command?
var otherDoc = app.openDoc("Setup.pdf"); ß This works and opens the document
otherDoc.closeDoc(true); ß This doesn’t work and document remains open
Acrobat JavaScript Debugger Functions Version 7.0
Acrobat Database Connectivity Built-in Functions Version 8.0
Acrobat EScript Built-in Functions Version 8.0
Acrobat Annotations / Collaboration Built-in Functions Version 8.0
Acrobat Annotations / Collaboration Built-in Wizard Functions Version 8.0
Acrobat Multimedia Version 8.0
Acrobat SOAP 8.0
otherDoc has no properties
5:Field:Mouse UpException in line 5 of function top_level, script Field:Mouse Up
otherDoc has no properties
5:Field:Mouse Up
otherDoc has no properties
5:Field:Mouse UpException in line 5 of function top_level, script Field:Mouse Up
otherDoc has no properties
5:Field:Mouse Up

Similar Messages

Looking for PS Script to Save and Close All Open Documents

I used ACR and CS5 to process my Nikon D3 NEF files. I would like a script that would save all open documents (witin PS) with the highest possible quality (12). I've found several scripts that will close all open documents with save but cannot figure out how to implement a save script.
For example, I may have 20 converted .jpeg files open. I would like to run a script to save & close all open documents.
Is it possible? Can someone post an example working script?

Take a look at the image processor, under the scripts menu.
MTSTUNER

Can't close multiple open documents

I have Lion, and all the iWork updates.
Try as I might I cannout seem to get Pages to STOP opening the last 10 documents I was working on.
I have tried the System Preferences for Mission Control and rebooted and UNselecting "open with windows" or whatever it is.
When I have Pages open I can see these documents when I click on the Pages icon in the doc, I can even open them that way. However, if I open just a blank document and look at the Window menu I do not see these documents.
Also, if I open one and click on the red close button or issue Command-W it will close but still be visible when I use Mission Control. This is driving me crazy. I would like ALL documents closed and only open the ones I want.
Can anyone please help?

Hello
Glad to see that we are leat two showing our teeth from time to time
Yvan KOENIG (VALLAURIS, France) samedi 23 juillet 2011 14:17:02
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Open documents and year end closing.

Hi experts,
I would like to know if it is necessary to close all open documents before we start the year end process.
Since practically it is not possible to close all open documents.
here open documents refer to Purchase orders, GRPO's, Sales orders, deliveries etc.
kindly suggest.

hi ajith,
Purchase orders,sales order won't have any impact on accouting which will only
effect ordered,committed quantities.
GRPO can be kept open in case when there is orginal bill is yet to be sent by vendor.
Production orders which are open(ie) production completed - should be closed atleast
before year end so that it can't avoid unnessary WIP variance posted in next fiscal year,
because production orders will post JE's only on Actual Closing Date.
Jeyakanthan

Close all opened PO

Hi Experts,
What is the T-code to close all open PO in one shot for a particular plant ?
Regards,
Phalgun patel

Hi,
Normally to close PO ,users have to set "Delivery Completion Flag" in PO.
You can do the same for several POs using Tcode-MASS
Select Object-(BUS2012-Purchase orders) > Execute > Purchase Order Item > Give the reference of all POs and line item number(which requires to short-close) > Execute > Select Field "Deivery Completed" > set "Y" flag to all and then Execute.
It will then help to short close all POs through Mass transaction.
Note also you need to shortclose PO by selecting deletion Indicator="L" if the GRN is not made.
Hope this will resolve your query.
Regards,
Sandesh Sawant

On Startup: Open Document, Export as PDF (Print), Close

I'm a software developer but I've rarely worked in JavaScript-like languages. I have a simple task I'd like to automate. The task will run infrequently -- maybe a dozen times on a busy day -- so performance isn't a priority.
My application generates a customizable 8"x5" label which is attached to large tanks. Sometimes users want smaller versions of the label, 8-up on 8.5"x11" stock. Our graphics department has an InDesign document that works perfectly. The document uses the Place command to place my label PDFs eight times in exact locations. InDesign automatically crops to the visible boundary, so all I have to do is replace my PDF with a new one.
I saved the graphic department's document as .idml which I edited to make the PDF paths relative rather than absolute. InDesign automatically regenerates the page when it opens the document.
Now I want to use InDesign to automate this task. The server version would be serious overkill; all I need is a script that will run when the document opens on startup. The script has to export the document as PDF (for print) to a fixed filename, then close InDesign.
An alternative would be to leave InDesign open, but I'd have to figure out how to send it an instruction to open the document, export it as PDF, then close the document.
I think the first technique can be done with just a couple of lines of JS. Any sample code showing how to do it would be greatly appreciated.
Thanks again,
Andy

Here's a list of the actions the simplest script would have to implement:
Run script on document open. Wait for PDF import to complete.
File / Export...
Save as type: Adobe PDF (Print)
Enter file name
Click "Save"
Exit InDesign without saving document.
The more complicated version would leave InDesign running between documents, using these actions:
Open document
Wait for PDF import to complete.
File / Export...
Save as type: Adobe PDF (Print)
Enter file name
Click "Save"
Close document without saving it.
Thanks again for any guidance,
Andy

Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

F-28 T-CODE - Open Document is not being pulled

F-28 T-CODE - Open Document is not being pulled
Item is shown as open on customer account (FBL5N). Item has not been cleared.
When selecting items to apply payment, the following message is shown:
"No appropriate line item is contained in this document" Message no. F5228
Appreciate any help that can be provided.
Best regards, Maikol M.

Hi,
- Check some table fields in the missing documents using Transaction SE16. The following conditions must exist:
BSIS-XOPVW = X (Indicator: Open item management, only for G/L accounts)
BSEG-XOPVW = X (Indicator: Open item management)
BSEG-AUGBL = space (clearing document number)
BSEG-DISBN = space (discount document number)
BKPF-BSTAT = space (document status)
BKPF-XSTOV = space (indicator reversal flag)
REGUS/REGUP -> see below
Look at table REGUS using Transaction SE16. Enter the account (KONKO) in the selection screen. If you selected an entry, use the information Run date (LAUFD) and Identification (LAUFI) in Transaction F110 (payment program). Check the status of the payment run. If only the proposal was carried out, the documents proposed for payment are blocked for other clearing transactions. It is only when you delete the proposal run that the items are taken into account again in the clearing transaction.
Rgds.

I am getting the error code, "error opening document, please try agailater" when clicking on the application link from a website. The form was working properly but stopped. What happened?.

My form was working properly but today, 20 June, an applicant clicked on the website link and got an error that says, "error opening document, please try again later". How can this be fixed?

Is this a FormsCentral form?

T-code to close multiple posting periods in mm

Is there is any t-code to close multiple posting periods in mm?
Regards,
Surendra babu.

Dear Surendra,
Open & Close Posting Periods
FI posting periods:
IMG->Financial Accounting->Financial Accouting Global Settings->Document->Posting Periods->Open and close posting periods.
OB52
MM posting periods:
Logistics->Materials management->Material master->Other->Close period
MMPV (to open current period)
Logistics->Materials management->Material master->Other->Post to prev.period
MMRV (shows what is open)
Also check OB52 for type M
Reward Me If Helpful

My mini Mac with a i5 processor is extremely slow to open documents and programs. Is there a solution to this??

Anyone can asset me please. My mini Mac is a 2.3 GHZ i5 Core. 8 GB Ram 13333 MHz with OS 10.7.5.
Pretty much since day one this computer is very..extremely slow to respond to any command. Opening documents or programs the system spin for ever.
Any idea what could be causing this??? I was told that to many pictures slow down the system, I have only 700 pic on file

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS5ServiceManager com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.Java-Updater com.oracle.java.JavaUpdateHelper ' ' 879294308 1083382502 1274181950 464843899 1233118628 3301885676 891055588 998894468 695903914 1106243579 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Not able to open document using anchor tag in firefox

Hello Friends,
I would really need your help in solving this issue.My application is deployed in server machine.
I'm accessing the application through fire fox. In my application, i have a link where i need to open a document on click of it.
For this, i am using html anchor tag.
Eg:
Test
where IP is the server machine address and dir is the shared directory.
It works in IE but didn't work in fire fox. Please help me out on to fix it.
Cheers,
Cap

Try out to open doc using following link, {color:#ff0000}*use 5 back slashes instead of 2*
{color}Test Link
once you done the code change, close the browser and open a new browser and try it.
Edited by: Thagelapally on Jul 17, 2009 6:05 AM

Close ALL open files and save jpg with jpg option

Hi,
I have some (a lot) of -jpg images to crop, and resize, while I have to do this one by one based on what portion of the image to crop, once done I need to close, and save them.
To speed up the process I open several files, and do the crop&resize, and when finished I use "close all", and would like to avoid to confirm the "save" dialogue, and the "jpeg options" "image quality option" dialogue, having to say save, and the option set to a given value.
Unfortunatelly I am not a coder, and didn't understand anything from the Javascript Scripting Reference guide.
I found this
app.docRef.close(SaveOptions.SAVECHANGES);
here, I pasted it into ExtendScript, saved it, but when opening the script from file > scripts > browse it returns error 21 (undefined is not an object)
Will you please kindly give me the script?
Thank you

Add this snippet to a script file.
Load script file in PS scripts folder
Restart photoshop
Assign keyboard shortcut to script
#target photoshop
//Make Photoshop the formost Appplication
app.bringToFront();
// Requires at least one open document
while (app.documents.length > 0)
//Save all open windows
{activeDocument.close(SaveOptions.SAVECHANGES);}

Loop through all open documents not performing some actions

I have a loop that imports XML, then Exports each page individually, then has a SaveAs dialog for the indd, then closes the active document.
The import XML works, the SaveAs works, and the close works but the loop skips over the PDF part. Is it because I need to define myCounter in the for loop within the ExportPDF function? I just included the part from Choose XML to the end of ExportPDF.
//choose XML
var FilterXML = "XML File: *.xml";
var myXML = File.openDialog("Choose XML File", FilterXML);
//loop for each action below
for(myDocumentCounter = app.documents.length; myDocumentCounter > 0; myDocumentCounter--){
//import XML
app.activeDocument.importXML(myXML);
//PDF by page to settings; preset must be "dailies_x1a"
function myExportPages(myFolder){
var myPageName, myFilePath, myFile;
var myDocument = app.activeDocument;
var myDocumentName = myDocument.name;
var myBaseName = myBaseNameField.editContents;
for(var myCounter = 0; myCounter < myDocument.pages.length; myCounter++){
myPageName = myDocument.pages.item(myCounter).name;
app.pdfExportPreferences.pageRange = myPageName;
//The name of the exported files will be the base name + the page name + ".pdf".
//If the page name contains a colon (as it will if the document contains sections), then remove the colon.
var myRegExp = new RegExp(":","gi");
myPageName = myPageName.replace(myRegExp, "_");
myFilePath = myFolder + "/" + myBaseName + "_" + myPageName + ".pdf";
myFile = new File(myFilePath);
myDocument.exportFile(ExportFormat.pdfType, myFile, false, "dailies_x1a");

Nevermind, I found my error. Code should read...
for(myDocumentCounter = app.documents.length; myDocumentCounter > 0; myDocumentCounter--){
if(app.documents.length != 0){
var myFolder = Folder.selectDialog ("Choose a Folder to Save the PDFs");
if(myFolder != null){
myExportPages(myFolder);
else{
alert("Please open a document and try again.");
function myExportPages(myFolder){
var myPageName, myFilePath, myFile;
var myDocument = app.activeDocument;
var myDocumentName = myDocument.name;
var myDialog = app.dialogs.add();
with(myDialog.dialogColumns.add().dialogRows.add()){
staticTexts.add({staticLabel:"Please Modify the Base Name if Necissary:"});
var myBaseNameField = textEditboxes.add({editContents:myDocumentName,
minWidth:160});
var myResult = myDialog.show({name:"ExportPages"});
if(myResult == true){
var myBaseName = myBaseNameField.editContents;
//Remove the dialog box from memory.
myDialog.destroy();
for(var myCounter = 0; myCounter < myDocument.pages.length;
myCounter++){
myPageName = myDocument.pages.item(myCounter).name;
app.pdfExportPreferences.pageRange = myPageName;
//The name of the exported files will be the base name + the
//page name + ".pdf".
//If the page name contains a colon (as it will if the
//document contains sections),
//then remove the colon.
var myRegExp = new RegExp(":","gi");
myPageName = myPageName.replace(myRegExp, "_");
myFilePath = myFolder + "/" + myBaseName + "_" + myPageName + ".pdf";
myFile = new File(myFilePath);
myDocument.exportFile(ExportFormat.pdfType, myFile, false, "dailies_x1a");
else{
myDialog.destroy();

JavaScript - Is opener.document.getElementById() Necessary?

I have a JS script in the Page HTML Header of a page that I open as a pop-up, that runs a page process and then closes the pop-up. It works fine in FF but in IE it throws an error. Here's the code,
<script language="JavaScript">
   function passBack()
   doSubmit('SAVE_TASK');
   window.opener.location.reload(true);
   opener.document.getElementById('P2048_CUST_NBR').focus();
   this.close();
</script>and here's the error:
Error: 'opener.document.getElementById(...)' is null or not an objectI got this from another post a few weeks ago. I wish I could remember which one so I could thank the contributor, but alas, that was too long ago. Anyway, I do my development in FF and since this is an in-house app. and most of the users use FF we don't put a lot of emphasis on testing in every browser out there. We just turned this app on to one of our IE users and discovered the error.
I have commented out the offending statement and things seem to work OK, but can anyone turn me onto the potential problem(s) with taking this line out?
Thanks,
Gregory

On further testing, while it seems to be working, the focus still isn't going to the specified item. I discovered that the Cursor Focus attribute on the page was set to "First item on page". I set it to "Do not focus cursor" and set my JS code back the way it was, but got the same error. And With Focus Cursor set to "Do not focus cursor" and Brother's suggestion above, it doesn't put the cursor anywhere. I've even tried specifying a few different items and nothing gets the focus.
No complaints though, at least it's saving the data, updating the report on page 2048, focusing on page 2048, and closing the pop-up, and all that without any errors.
Thanks again, contributors.
Gregory

Code to Close An Open Document

Similar Messages

Maybe you are looking for