Code to sum up multiple record key figure values from one ODS to another OD

We've got two ODSs: ODS1 and ODS2 and ODS1 feeds data to ODS2 through update rule. In ODS1, multiple records could contain one same doc records and we would like to sum up a key figure value for these multip records with the same doc number in the update rule and populate a key figure (a sum-up value or total value) in ODS2 for this doc number. We wonder how the code would look like.
Welcome the valuable input!
Thanks

Hello Kevin,
In this case there is no need of a code. As in ODS2, contract number is a key and PO is not a part of key, you can have update type for the key figure as "Addition". Value for that particular key figure will be added for all the recordes with same contract number irrespective of PO number.
Hope it helps.
Regards,
Praveen

Similar Messages

Passing a value from one page to another with multiple projects?

Hi,
I am trying to do something and I am not quite sure what I may be doing wrong. Situation is this:
I have 1 project which is our Model, deployed into a .jar and imported successfully into the main project. No problems with this.
I also have another project for editing profiles, in it it contains a taskflow running off of page fragments to accomplish a CRUD design. This is also deployed and imported into our main project successfully. It has a parameter value that should be detected upon entry into the pageflow called inEntityID.
I have our main project application which has both imported .jar files into the library.
I am using the unbounded adfc-config Flow to make sure that the pages can see each other. They can.
If I use no data being sent from my main page to my edit page I can see both the main page fine and what would be a working region that is displaying the task flow from our editing project. If I attempt to send a value from my main page to the edit page it will not show up.
ADFC looks like so: MAIN goEdit>EDIT
Code snippet from my button which gathers data from the main page table to send to the edit page via action goEdit
<af:commandToolbarButton text="Edit Entity"
id="ctb3" action="goEdit">
<af:setPropertyListener type="action"
to="#{pageFlowScope.sendID}"
from="#{bindings.PseLegalEntityId.inputValue}"/>
</af:commandToolbarButton>
PseLegalEntityId is the value that I have named which is an attiributevalue from my mainPageDef which links to the primary key that I want to send to edit.
The paramenter that I have set in the region is set as such: Task Flow Binding Parameters : id* inEntityID | Value* #{pageFlowScope.sendID}
I am using Jdeveloper 11.1.1.2.0
Any insight on what I may be doing wrong would be helpful. Thanks in advance,
PSP

Is more information needed to answer this? if so let me know which.
Thanks,
PSP

Importing records into a table from one server to another server

I have two servers running Oracle Portal, these two servers are not connected at all. I need to export the records from one table on server one into a table (defined exactly the same) on server two.
How do I go about this? I know that I can query the rows and extract the information into HTML, Excel or ASCII on server one can I use one of these query outputs to somehow import into the table on server two?
Is there another method to accomplish this operation that I've overlooked?
Thanks in advance.

Export and Import are standard Oracle Database Utilities
with 9i version you can use simple export-import
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm#SUTIL001
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch02.htm#1656
or use with 10g a faster type of export-import
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_export.htm#i1007466
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_import.htm#i1007653

Less number of Records while loading data from one cube to another

Hi,
We are in the process of doing major changes in the existing InfoCube.
Before making any changes, we had planned to make a copy of the cube with data.
For this we did the following steps :
1. Created the new cube from the original cube.
2. Generated Datasource on the Orignal cube.
3. Made a update rule on the new cube by selecting the Orinal cube.
4. Made a InfoPack on Infosouce which got created with 8<original cube>.
5. Uploaded the data into the new cube.
We have uploaded the data successfully from the original cube to the new cube.
However, New cube shows less number of records as compared to the original cube.
But the query is showing the same figures from both the cubes.
Can anyone please advise what could be the reason for this less number of records and how the figures are showing same when we run the query from both the cubes.
Please help.
Thanks
Ramesh Ganji

Hi Ramesh,
this is possible coz when u have loaded yr original cube, it may be loaded on daily/weekly basis. so in the cube there are many requests. Also if in the same request, if there are two records with same dimension keys ther are automatically added aggregating them.
if req 1 has following records
cust mat amt
1      1     100
1      1       50
it will add
1      1     150
and if the records are seperated by different req, then both will b added individually.
therefore when u r loading yr new cube from original cube, all records that has same dimension key gets aggregated coz they are loaded into single request. so it showing less no of records as added.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN *

Remove double records during data upload from one InfoCube to another

Dear Experts
We have transactional financial data available in an InfoCube including cummulated values by period . Some companys have 12 reporting periods (0FISCPER3) and some companys have 16 periods (but all 16 periods are not always filled) . The data must be prepared for a consolidation system which expects only 12 periods. Therefore I bulit up a routine with the following logik:
If period > 12, result = 12, else result = source field.
But as the data target is (must be) an InfoCube the new values with reporting period 12 are not overwritten, but summarised instead. This means the original records with period 12 and the new records - see example:
Records before transformation:
Period   Amount
12          100
13           120
Records after transformation in the InfoCube:
Period   Amount
12          100
12           120
This would lead to the following aggregation:
Period   Amount
12          240
But as the values per period are cummulated, the consolidation system only needs the last period. So there should be only one record left in the InfoCube:
Period   Amount
12           120
Is it possible to delete dublicate records or do you have any other idea to to keep only the record with the last period (e.g. period 13) and to assign the value 12?
Thanks a lot in advance for your help!
Regards
Marco

Hi,
You have two options here, you can put DSO in between the Datasource and infocube, and load the delta using the change log.
Second is use delete the overlapping request from the infocube, it will delete the previuos requests and load the new request.
Check the below article:
[Automatic Deletion of Similar or Identical Requests from InfoCube after Update|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0431c48-5ba4-2c10-eab6-fc91a5fc2719]
Hope this helps...
Rgs,
Ravikanth

Prequery Key Figure Value to Pass to Subsequent Query

I need to be able to do the following:
Run a query that calculates the Quantity of a material that has not yet shipped. (Query has GI date = #)
This value then needs to be used by another query on a different cube that determines our current inventory and the QtyNotShipped needs to be subtracted from our CurrentStock.
The two queries will need to be joined using 0MATERIAL
I've read that you can pass results from one query to another, but I cannot remember how to do this.
Is it possible to pass Key Figure totals from one query to another?

Hi valhalla,
i think what you were referring to is RRI? Report-to-Report interface?
But that is to pass characteristic value to another query. Like company code, calendar month etc.
Have you considered using a MultiProvider combining both cubes to create Report B?
regards,
Gary.

Need help for report Variable to restrict the key figure value...

Hai gurus,
Now i have data in the cube as follows...
Reuisition     HR INTW date     LM INTW DATE     TEL INTW DATE     HR Count     LM Count     TEL Count
a1              01.01.2010     02.01.2010             01.04.2010                 1                1                 1
a2              02.02.2010     03.02.2010             02.02.2010                 1                1               1
a3              03.03.2010     04.03.2010             03.03.2010                 1                1               1
when i execute the report it shd ask the prompts with Date interval as in the below...
HR INTW date
LM INTW DATE
TEL INTW DATE
if i dont give any interval in the variable prompt it should display all the recors as follows
Reuisition     HR Count     LM Count     TEL Count
a1               1                  1               1
a2               1                  1                     1
a3               1                   1             1
If i give LM INTW DATE interval as    01.01.2010 to 31.02.2010
then it should display all the other counts as in the output_1 , but for LM count for a3 it should show 0.
Reuisition     HR Count     LM Count     TEL Count
a1               1                  1               1
a2               1                  1                     1
a3               1                 0                  1
that means wherever i restrict the data depending on the variable that only that interval key figure value shd be in the report..
for this scenario, which variable i need to use... and how i need to restict the KFig value in the report...
Right now i am getting like this but it is restricting the records,,, where it should not restrict the records...in the report..
Please guide me for the same...
If any concerns about the scenario please let me know...
Regards,
VJ

hi chowdary ,
could you tell me the var. creation in detail and with which reference object i need to create ...
whether i need to take LM_DATE / 0DATE while creating variable...
and i kept this variables it in filter section, based on the LM_DATE Object.
i have tried both.. y'day when i take 0DATE it giving me some results...
But at the same time it is restricting the records..
i think it could be a problem with var.. properties?
need more inputs pls.
Regards,
VJ

Compression error due to Key figure values

Hi experts,
When I am compressing the Info cube, the job is getting terminated. I think that the problem comes from a data issue.The field /BIC/ZX_COM_LC (key figure) contains huge values in both F table and E table. For exapmle the entry in F table is 23.592.684.640.809,00 (16 digit) and E table entry is 985.460.854.341.148,62 (17 digit)and while in the process of compressing they should be added and the value becomes 18 digit number which is greater than the capacity of that Key figure(CURR 17 decimal 2). This is why the compression job is terminated.
Please through some light on this issue.
1.If I change the key figure type from DEC to FLTP , what are the consequences?
2.Do we have any oss notes to solve this issue in production?
3.Is there any work around for this?
Please provide your inputs to solve this issue.
Thanks in advance,
Edited by: SiNU reddy on Aug 19, 2010 3:35 PM

Seems like you have too much of data still present in F fact table whcih needs to be compressed.
Is this data is present in one request or with the multiple requests?
If its with the multiple requests then you can do the compression job multiple times by splitting the number of requests in this case so that the data whcih you are trying to compress is limited in this case.
So I propose you to compress few requests at one time and proceed further and check whether you have the same issue comes again or not?
Do get back.. Hope this helps.
Murali

Error in key figure value at Reporting level

Hi Experts,
I had problem of Key figure value which displays wrong data in reporting.
The Process is :
I had added the key figure SALK3 to the generic data source (xxx). The Extractor is Table/View, Table is MBEW.I had replicated to BW side.
In BW, The process is Data Source(Generic) to 0MAT_PLANT(Infoobject (Added SALK3 to the infoobject of Attributes tab) ) loads to Multiprovider.I can see data in the multi provider for that particular field after loading.
Now the problem is, In Query designer i had added the key figure in Columns and ran the report.The output of the field is, If the value is 100 it displays 100 ERROR, if it 200 it displays 200 ERROR.Could you please help me on this,where i went wrong.
Regards,
Kishan.

Hello,
Please check with the follwing screen shots:
Right click on the key fgure you created----select edit
Once the screen opens select the NODIM from Data Functions before the key figure (as highlighted).
Finally click on OK.
Regards
NS

Key figure value in a level

Hi is it possible to identify which key figures values has introduce a user ? and which CVC has the user uses for inserting the key figure value?
REgards.
PS :We have APO DP 5.0

Javier,
It is possible to identify and track the inputs of specific users contribution to that Key figure using the following method, Provided you follow certain prerequisites first.
Its should be known before the certain people are responsible for certain data selections, like if there is a change in certain Sales org, we should ideally know who is the assinged planner to that Sales Org. or that sales org has been assinged to which Planner
Next, Develop to Lag reports in BI using the regular snapshots of the the data extracted out of DP before and after the changes have been made for that particular KF.
Compare the changes using the versions of snapshot before changes and after changes, or perhaps create another calucalted KF showing the different between two versions. The BI team should be able to create reports that enable you to run this report on all levels for that Key figure.
Hari V

Key Figure value in Cube showing with extra zeros

Loaded data into the cube. When I display the result
Key figure values are showing with 2 extra zeroes and Quantity value shaowing with 3 extra zeroes.
Original value
Price, Quantity, Sales Rev
2     1     2
3     2     6
When display value from cube
Price, Quantity, Sales Rev
2,00     1,000     2,00
3,00     2,000     6,00
Why zero is showing? How can I display the original value? In PSA, values are showing correctly.
Thanks,

Hi,
These are the zeroes after the decimal places. this is the property of the key figure.
In your report you can change the display value. In the display properties of the Key figure under the number of decimal places make it as 0. This will remove the zeroes.
Hope it helps.
Regards,
Gaurav
Edited by: Gaurav Kothari on Oct 16, 2008 10:35 AM

Key figure value based on user input.

Dear Friends,
We are using BI7.00 and NW2004S. In one of our report to monitor the number of notification closed and the number of notification open upto the user selected month. For this i have created a Query which has selection screen value as month. I have created a condition which will fetch the difference in days (notification completion - notification creation date) based on user entered value. For example if user enters 10 in the selection screen, report will fetch the notifications which have diffrence in days as 10.
The condition is okay for the above. What user actually wants is the number of notifications completed and that pending based on the value he enters in the screen. For example he enters 10 in the screen, system should show the values as shown below
                > 10 days
Completed                Pending
          3                           2
I tried various options but could not achieve this.
Experts help expected. Kindly provide solution.
Regards,
M.M

Hi,
As per my understanding 1 firstly u have to find out
the no of days (diff between dates notification completion, notification creation date .)
then u have to create condition on no of days which u
have find.there u have to create one user entry
variable for the user can enter his own parametrs.
Right?????
If It is right..
here are the steps..
1st:in the query designer at key figure coloumn create
one local formula.in that local formula create formula
variable with replacement path.in that take reference character
notification completion.in the next tab take replace ment
as key.in the last tab select "date".
2nd: do the same thing for the notification creation date.
3 rd : create 3 rd local formula and do the substraction
for the first 2 local formulas.
4th:create codition on the difference which u have find with
on that condition u can create one user entry varibale.
5th:while u defining the query put these 2 dates,i,e
notification completion, notification creation date in the character block.
If not system will ignore the formula variable which u created in
above steps.
Hope this wil help u.
regards....KP

How to create a variable for key figure (value will be entered by the user

I want to create one query, where the user has to entered a max value when the query is started, so that only the query rows will be listed, where the key figure value (integer) of the row is smaller than the max value given.
How can i define that variable which has to start at the begin of the query; and also the restricted key figure iin consideration of the KF variable.
Thanks for helping
Ar.

Hi Arnaud,
Go to Conditions-> Right click -> New Condition -> Edit -> NEw -> Selct the KEy figures from the dropdown( the KFs that are used in the rows/columns) -> Select Less than from the operator drop down (less than is for you case) -> Values, there is an option to create a variable -> Select the variable -> transfer. It will appear on the top.
Save & Execute, you will find it in your selction criteria.
Regards
Sunil

Selection of key figure(s) from a structure

Hi,
I have defined a structure in my query that contains several calculated and restricted key figures. When I execute the query I only want that one (or a selection of) key figure(s) from the structure is(are) available in the report. It is also desirable to be able to select another key figures from the structure at run-time of the query. How can I solve this???
Thanks and regards
Eivind

Hi Eivind,
why don't you use BEx filter functionality? It allows you to restrict the drilldown to one or more key figures.
If you are reporting in web browser, you can also create a web template where you select the displayed key figure in dropdown box.
Best regards,
Björn

BEx query: count unique key figure values

Hi
I need a little help with a query. I need to count the number of unique key figure values. Se example;
Data:
Employee1 - 2
Employee2 - 3
Employee3 - 2
Employee4 - 1
Employee5 - 2
Employee6 - 1
Employee7 - 2
Wanted output:
1 - 2
2 - 4
3 - 1
What kind of options do I have?
Thanks
Mike

I would create a new characterstic for the same key figure and placed in rows and count in columns.
and second approach would be , create condition with customer exit and write the logic to count the unique values.
This is just a direction to move forward with the assumption that you are good in using variables and wirting logic in ABAP.
Thanks,
Sukhi

Code to sum up multiple record key figure values from one ODS to another OD

Similar Messages

Maybe you are looking for