Codec compression error
Hi,
I'm new to Premier (I'm using Premier Pro CS3) and for the project I'm working on I need to export an uncompressed 10-bit (4:2:2 YUV) file, 50fps, 3840x2160, however I get the following message.
Error compiling movie. Codec compression error. This codec may be unable to support the requested frame size, or there may be a hardware or memory problem.
Any ideas how I can achieve this?
Thanks
What codec are you using?
Does this message help - Lossless/Uncompressed Codecs http://forums.adobe.com/thread/875797
Similar Messages
-
Cfhttp compression error.
We switched to a new web server and I am getting the IIS
compression error
with cfhttp.
I found the solution on the Docs and also on other sites, but
it isn't
working for me.
Can someone check my code and see if I missed something:
<cfhttp url="
http://mywebsite.com/campaign/csv/#campaign.csv#"
name="uploadlist" method="get" textqualifier=""
throwonerror="yes">
<cfhttpparam type="Header" name="Accept-Encoding"
value="deflate;q=0">
<cfhttpparam type="Header" name="TE"
value="deflate;q=0">
</cfhttp>
I found the answer here, but maybe I missed something?
http://www.talkingtree.com/blog/index.cfm?mode=entry&entry=25AA8297-45A6-2844-729DBD51575C 1BD2FYI.
I get this error:
Connection Failure: Status code unavailable
on this line:
<cfhttpparam type="Header" name="TE"
value="deflate;q=0"> -
Compression Error while saving workbook
Hi All,
Iam trying to save as new(existing) workbook after executing a query, same prob. in both QA & Prod.
<b></b> Receiving from the BW Server failed
BW Server raised Exception
SYSTEM_FAILURE
BQ: compression error ( rc = -2)
Program Terminated.
my authorizations are fine, i never had this before, even i cannot able do it from BEx Browser too.
The servers are fine, but little busy coz big loads are taking place.
but i tried couple of times, i could able to store under different ROLE under different name. Y can't i able to save as existing workbook & can't able to save in the same ROLE
Can anybody pls. help
Thanks in advance.
Robyn.Hello Jaya,
I appplied de note you suggested for this problem, but the error message remains.
I restarted my PC and I even reinstalled de GUI in my PC but nothing yet...
There are 3 people working with me in the development of the BW and I am the only one with this problem. So far, one of our power user has this very same problem and there is a chance that the users will have it to...
Would you have any other suggestion?
I would appreciatte it.
Thanks,
Luis -
Export/Encoding/Compression Error
I have been trying to burn a DVD for the last week without any success using iMovie and iDVD.
When trying to burn the DVD on iDVD, the program would "Unexpectedly Quit" while it is encoding the movie. It would encode the first 2-3 minutes of the movie before the program quits. Furthermore, when I try to save the project to a Disk Image, the program unexpectedly quits too.
Since I noticed that the program was quitting during the encoding process of the first movie, I tried exporting the first movie into another format such as QuickTime and MPEG-4 using iMovie. QuickTime immediately prompts the message:
"A file compression error occurred. The movie could not be properly compressed. THe movie may contain some data that is invalid for the type of compression selected."
The project consists of JPEG's, Quicktime MOV's with sound(from a Kodak Digital Camera), and M4p's (purchased through iTunes). I would believe all these formats are compatible with iMovie since they are all imported successfully. When trying to export to MPEG-4 with Audio (AAC-LC), the encoding processes half way, then quits unexpectedly.
On an interesting note, when I encode the same movie using MPEG-4 with NO AUDIO, the encoding process completes successfully. I am suspecting that the issue may have to involve the Audio.
Out of the 9 iMovie Projects I included in my DVD, 5 of them could be exported into Quicktime MOV's correctly, while the other 4 would cause the program to quit. I noticed that the 5 that do work are all under 5 minutes of video and audio. The other 4 that say "A compression error occurred". I do not know if this somehow attributes to the problems.
Is there anything I can do to encode these 4 movies correctly?
If it is an issue with the audio compression, is there a work around for it?
If I am able to encode these movies correctly on iMovie, should the encoding process for iDVD work correctly also?
Any help anyone could provide would be greatly appreciated. Thank you.
Mac Mini 1.42GB Mac OS X (10.4.3) 1 GB RamHi ebm - not sure that I can help much, but a few observations:
iMovie converts M4P files to AIFF, so that shouldn't cause a problem.
The .MOV files from the Kodak still camera may be more problematic - are you sure that the audio on them plays in iMovie? What format are those files - perhaps they're mpeg4?
I cannot see why you would want to convert the movie to MPEG4.
What about creating a QT (Full Quality) file of each movie, then open iDVD and drag them into the iDVD window. If their combined length is less than 60 minutes, you could use the Best Performance setting with background encoding ticked (in iDVD Preferences) - you can then watch them as they encode.
Of course, Best Quality may produce a slightly better result, but the encoding occurs after you click Burn.
Good luck! -
I have a ACE 4710 which I have enabled compression on the L7 policy map using compress default-method gzip. We have recently run a performance test and I have noticed many compression errors on the show service-policy detail output. However I cannot find details as to what these errors are or cause in any manual.
The comprssion specific stats from show service-policy detail are:
compression:
bytes_in : 14449218178 bytes_out : 6622221458
Compression ratio : 54.16%
Gzip: 2308157 Deflate: 0
compression errors:
User-Agent : 0 Accept-Encoding : 0
Content size: 1244 Content type : 160821
Not HTTP 1.1: 39 HTTP response error: 1935746
Others : 0
If I am reading this correctly 90% of compression hits where in error?
Can anyone point me at the correct documentation to find out what is going on?
ThanksIs it possible the HTTP Response errors are due to HTTP 304 responses?
-
HR Tables are not updated due to compression error
We have a custom program that program used to copy data from Production system to other QA systems. The program uses the FM
Table_decompress to decompress the file downloaded from Production and update the HR tables like PA* series in QA.
While uploading the those tables from the file it updates half of the tables and other tables are
not updated as FM Table_decompress produces a exception saying "Compression error". what would be the problem here?
Edited by: Ganesh Kumar on Feb 2, 2011 10:14 AM
Edited by: Ganesh Kumar on Feb 2, 2011 10:25 AMI have provided some information below that may help.
Step 1. Update the device using VZ Access manager. Instruction below:
http://support.vzw.com/clc/devices/knowledge_base.html?id=14636
Step 2. Unplug the device (if tethered), restart the computer, and try another USB port (if applicable).
Step 4. Deleting and recreating dial-up connections.
http://support.vzw.com/clc/devices/knowledge_base.html?id=23830
Step 5. Try to connect.
Step 6. (If Step 5. Fails) Disconnect, unplug the device, completely uninstall the current version of VZ Access Manager, and restart the computer.
Step 7. Download VZ Access Manager from our website www.vzam.net
-On the main page, select Supported Devices on the left hand side.
-Under the Data Devices like for Verizon Wireless USB 760 (second from the bottom of the row)
-Select the link under the Windows 7 column for the Verizon Wireless USB 760
-Click Download Now and Save to the desktop
Step 7. Install VZ Access manager using the downloaded file
-Follow the step up instructions
-Plug in the device when prompted
-Try to connect
I hope this helps. -
File Compression Error Occurred on Expert Settings
I finally thought I had a decent set of settings to compress the QT movie for YouTube (and will tweak this now that each ten minute movie can be 1 gig! Hooray!). So I used what had worked on the previous movies and got the error
File Compression Error Occurred
The movie could not be properly compressed. The movie may contain some data that is invalid for the type of compression selected.
The movie itself contains imported footage from my camcorder (DV), as I usually use. And I used only iMovie stock music loops and one Sfx...all aif files.
I've tried tweaking the settings of Expert Settings here and there. Changed the 15 fps to 30. Made the Key At this point, what do I look at? Something within the movie itself? Or the settings (H.264, qual. Hi but also tried med, Frame rate tried 15 and 30, Key frame rate tried Auto and 10, Encoding multi-pass, Dimen. 640x480, Scale Letterbox. Sound is ACC, 24,000 kHz, stereo, bit rate 48kbps. Prepare for internet streaming is unchecked currently. Think it was that way when I last made a movie.
Don't know where to continue to troubleshoot this. URmpfff. Help!Wow...this is a sticky problem. I could not resave the movie as another name. Frozen program, pinwheel of death, etc. I've had about three frozen attempts since I first wrote...
Googling phrase from error message got only a few lost souls who never did post the solution. One solution someone had figured the problem was with Flip4Mac...to uninstall it, but they had problems uninstalling it. So did it...frozen computer).
I did get this solution to work to move my movie along. It saved rather quickly to a 350 meg or so full quality file on Expert settings. Then got a single .dv file. Imported that into a new iMovie project (wonderful....that I titled My Great Movie fer petes sake...Hope I remember to retitle it.
Along the way were error messages like Error 54, no permission to write to file, no hard drive space, etc. Baloney, I think...or is there any clue in all this?
Thanks. -
Infocube compression error CX_SQL_EXCEPTION
Hi,
We are encountering a infocube compression error ( CX_SQL_EXCEPTION: parameter is missing).
Have applied two notes:1028847 and 973969. But did not fix the error. In the system log we have the following error:
ORA-00054: resource busy and acquire with NOWAIT specified.
Every time when the compression failed, we always repeated it and completed successfully in second.
Could anyone know what we can do to fix this.
Thanks!
JXAHello Girija,
Please check OSS note 973969.
Regards,
Praveen -
I just bought a big external harddrive and want to archive my old videos on there.
I tried to import a movie (that I did many years ago on a PC) from the miniDV tape to iMovie (DV project). For that I turned the option to split the move at the timestamp off since the movie is already edited and I just want to export it as high quality mov file.
Problem is that when I try to export/share the movie (not matter to which format) I get after a while an 'compression error' (sometimes iMovie dies, usually I get an error window).
This happens not only with this movie, I tried several (newer and older) movies, always the same result.
I started blaming the new Quicktime update since I heard may bad things, I uninstalled Flip4Mac and any other QuickTime plugin - nothing helps. Even exporting to 'DV' gives me an error (and one should think to convert a DV to a DV should be as easy as flushing the data to disk). I tried several times to import it again from tape (thinking something might have gone wrong) --> same result whenever I try to export, I get an error.
Last night I finaly turned on the option to split the video at scene changes (timestamp) and to put the clips automatically in the timeline. I ended up with 200 small clips in the timeline and exporting works just fine (my next test will be to reinstall all the quicktime plugins).
So this is a doable workaround that is not causing any headache for me.
But my question is: is there any known limitation of how long a single clip in iMovie can be? What else could cause this problem?
My worry is: At some point I might end up even with splitting at the timestamp with a clip that is too long (it happens that one forgets to stop the recording and than you might have 45min of funny recordings). Solution for this is probably to turn on 'split after 10min'. Given that this options exists, I guess there is some undocument limitation (I would see no other good reason for this options to exist).
Any insight thoughts about this would help me to understand the cause of the problem and how to prevent this from happening.
thanks
-Uwe
20'' iMac (Intel) Mac OS X (10.4.9) iMovie HD6, latest QuickTime updatethe problem had probably to do with the fact that the video was recorded in the LP mode with 12-bit audio which is causing problems when importing through QuickTime and iMovie. Those videos were edited and written back on my old PC without problems.
My workaround is now that I import those videos with Windows from my boot camp partition (as DV-AVI) and than reboot to MacOS to convert them in a better format. Conversion with the AVI files captured by windows don't show any problems. -
Compression errors: HDV to HDV/DV (green square dots)
- Compression errors: HDV to HDV or HDV to DV (green square dots) -
I'm having compression errors when trying to export HDV Projects using
- FCP Export Quicktime movie
- FCP Using QT Conversion
- Compressor
For example today I tried to export 1,5 hour HDV Project (edit version) to master HDV clip. I used FCP Export QT Movie and the new master clip has 19 compression errors. Most of them were during first 30 minutes.
See the picture from: http://www.aavekammari.com/comperr.html
Errors are mostly green dots lines, but they can also be other coloured dots or just small squares.
I have tried to remove extra RAMs, using only Apple's original RAMs, tested RAMs with couple of softwares. I read somewhere else that the RAM could be the issue.
Does anyone else having this kind of problem?
Final Cut Studio with all latest updates (FCP 5.1.2) / Quicktime 7.1.3
G5 dp2.5/2.5GB Mac OS X (10.4.8)http://www.aavekammari.com/comperr.html
It seems that errors can appear even when rendering in FCP (second picture in the link above).
I did some research.
- when I tried to export QT file: In 1,5 hour project all errors were during first 50 minutes.
- when I forced FCP to render all clips (CC added): All errors were again during first 50 minutes!
So I found that all media files in first 50 minutes are in the same internal HD (not same where the FCP is). And the rest of them are in external firewire HD. Could this be reason, but why, anyone? -
IMovie Compression Error!
Hey all,
I have a customer who needs to encode clips from a DV Cam to Sorenson 3. During the encode they get this error:
"A file compression error occurred
The movie could not be properly compressed. The movie may contain some data that is invalid for the type of compression selected."
So far nobody seems to know how to solve this. Any ideas anybody? ThanksWe also had this problem. Here is what worked for us. I'm interested to see if it works for anyone else.
This video project was the end product of four different students working more or less independently on the same project over the span of ten months. Each used digital still cameras, jpgs exported from PowerPoint, the internal microphone, and a number of different digital video cameras to get media into the iMovie project.
We had exported and burned many versions of this project so when it stopped working and starting giving us the Compression Error message, I knew it had to be something we just added.
The side note here is that when exporting the 20 minute video at Full Quality DV, the process will complete, but the exported file will have video but no sound. The first time we got the Compression Error message was when we exported using Expert Settings and tried just the audio. That forced it to fail.
The solution was to select small groups of clips and try to export each one. When the Share, or Export window opens, check the box at the bottom that says, Export selected clips only. If it worked, we skipped to another set. Eventually we isolated it to a section of clips and exported each clip individually. It turned out to be one of the audio dialog clips that was recorded using iMovie earlier that week. As a test, I deleted it and the entire video exported just fine. We rerecorded that audio clip and everything continued to work just fine.
I opened the Media folder inside of the iMovie project file and located the offending voice recording. It opens in QuickTime and it seems to be perfectly fine. I have no idea what was wrong with it. Two other audio clips were recorded right after that clip and they are working just fine.
I suppose this is less of a solution, and more of a work-around. Hopefully it helps someone out, because it made me crazy.
(I don't know if this is related, but the iDVD project took about an hour and a half to compress the video, but it took well over 4 hours to compress the audio on a 1.67 GHz PowerBook G4 with 2 GB RAM. This seems to be common with most of the larger iDVD projects this year. I almost force quit iDVD, but getting info on the .dvdproj file showed that it was still growing.) -
Cannot edit MP4 files, maybe compression error?
Hi, I'm new to Final Cut Express. I just bought it to replace iMovie. But I'm having a issue - only had it open for not even a hour and I started getting a "General Error", specifically "Out of Memory". It was a mp4 clip, like this:
MPEG-4 MOVIE
1280x720
H.264, MPEG 4 HIGH EFFICIENCY AAC
2 (Audio Channels)
3,127 (Bit rate)
45.5 MB
I browsed the forums for a bit, trying to figure out what I could do to make the errors go away. I've never had problems with compression or anything like this before. I saw somewhere that I should use MPEG Streamclip to convert the clip to .mov using Apple Intermediate, but MPEG couldn't edit the file either, although it played it fine. I tried going in and trying to export to .mov via Quicktime, but it only exported a completely white video with normal audio. I have no idea what to do now.
Why is this happening, how do I fix or prevent it from happening??
Message was edited by: BreatheHorrorI think you missed me a little here... from MPEG Streamclip, I took the original dimensions and tried to convert it to quicktime with the following settings:
APPLE INTERMEDIATE CODEC
QUALITY 100%
UNCOMPRESSED SOUND
1280x720 UNSCALED
FRAMERATE 29.97
When I try to convert like this, using any of the clips (the clip I had originally talked about was one out of a batch of twenty, I tested them all last night after posting a realized they all get the same error) I get a empty, 0kb file and a Error that says it can't prepare the movie.
FCE won't even open the video at all. I can import it, but when I try to open it with the viewer it doesn't open, it simply spits out a general memory error. It's my Quicktime that does the white screen every time I try and convert the movie through it.
I will however, try to change the setup of my FCE Sequence... when trying to use this clips I was using HDV-APPLE INTERMEDIATE CODEC 1080i50. I was using it because I need the 1080p (this is for Youtube) and it was the only easy setup that was the size I needed. I'm a noob, I don't have any idea on how to change the size of the video (just any easy setup gives me the old square video, so if I try to change it when rendering the clips would be all placed weird with possible gaps). -
M2ts AVCHD suddenly giving unsupported compression error
Hi --
I spent all day yesterday doing a rought cut of some AVCHD footage, closed the project last night and tried to open it this morning and suddenly all my AVCHD footage is "offline." If I try to relink it I get an error message saying the files have an unsupported compression type. If I try to import the files (that read yesterday) into a new project, I get the same error. The (very) odd thing is if I import those same files into After Effects, they're just fine. How can I have blown out a codec on Premiere Pro only and how do I fix it?
I have a fully licensed CS 5.5 Master Collection subscription. Premiere is at 5.5.2 and update tells me it's the latest. From all my looking around I see that there used to be a problem with CS 5 forgetting its codecs were licensed, but that's not supposed to be a problem for CS 5.5. Help! I don't want to have to re-do all that work.Software problems happen, so you should buy AND USE software to make a full backup of your hard drive to an external USB hard drive... plus, making step-by-step backups during a new install or major program addition makes it easy to go back a step if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive (or the same drive as long as you don't mind writing over everything) since doing a restore to a new computer won't work due to Windows and many programs having activation information that is keyed to your hardware (which is why Windows will force you to RE-Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to make the bootable CD) and it reads EVERYTHING on the drive, even the hidden registration information, so everything is restored when needed... and you may restore the image to a brand new drive in case of a crash, and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a plain web link) but I use the program and it has saved me a LOT of trouble when I had a hard drive die... and I was able to restore everything and not have to re-install or re-activate a single program, from Windows on up -
Hello, I made a folder with 1036 items and try compressing the folder by right clicking and compress.
When I try decompressing the folder, I receive error: can not open output file file.jpeg for about 200 files.
Any help please, such as another easy way of compressing with Apple?Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the compression again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting. -
Hello,
I would like to ask you about advice.
We have MSSQL 2008 R2, 32 bit. Memory is 4GB, split into 2GB for Windows and 2GB for applications. Database has recovery model simple because we have replicated data into other servers ( 2 ). Contemporary we work with 2 servers. Max memory for MSSQL is 2048
MB.
We set the backup as follows:
USE MSDB
GO
DECLARE @JMENO_ZALOHY VARCHAR(120)
SELECT @JMENO_ZALOHY = 'E:\backup\BackupSQL\1 Pondeli\DAVOSAM_'+ convert( varchar(2), datepart( hh, getdate() ) ) + '00_DEN_DIFF.bak'
SELECT @JMENO_ZALOHY
BACKUP DATABASE [DAVOSAM]
TO DISK = @JMENO_ZALOHY
WITH INIT, DIFFERENTIAL, CHECKSUM, COMPRESSION
GO
Every second or third day in log there is error message: 'There is insufficient system memory in resource pool 'internal' to run this query' Accurate in time of backup. The error is still repeat, majority in working hours.
Today I have found out, that problem is probably in compression of backup. Because if I removed word: compression, a backup normally runs without error.
Question: Is my hypothesis correct that problem is in backup with compression?
Thank you DavidHello, today evening I have ran backup command bellow. All is OK. Probably MSSQL has cleaned memory. Next attempt I will try in peak next week.
Since time I have removed word compression, in error log is not any error.
I have checked memory as soon as memory gets on top, it is about 1.707 GB the MSSQL writes into log this messgages:
2014-03-14 15:00:04.63 spid89 Memory constraints resulted reduced backup/restore buffer sizes. Proceding with 7 buffers of size 64KB.
2014-03-14 15:00:08.74 Backup Database differential changes were backed up. Database: DAVOSAM, creation date(time): 2014/01/12(22:03:10), pages dumped: 16142, first LSN: 1894063:1673:284,
last LSN: 1894063:1792:1, full backup LSN: 1894053:15340:145, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'E:\backup\BackupSQL\5 Patek\DAVOSAM_1500_DEN_DIFF.bak'}). This is an informational message. No user action is required.
2014-03-14 15:00:12.79 spid72 Memory constraints resulted reduced backup/restore buffer sizes. Proceding with 7 buffers of size 64KB.
2014-03-14 15:00:12.88 Backup Database differential changes were backed up. Database: WEBFORM, creation date(time): 2014/02/01(05:22:47), pages dumped: 209, first LSN: 125436:653:48, last
LSN: 125436:674:1, full backup LSN: 125435:689:36, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'E:\backup\BackupSQL\5 Patek\WEBFORM_1500_DEN_DIFF.bak'}). This is an informational message. No user action is required.
After that the MSSQL reduced memory on 1.692.
USE MSDB
GO
DECLARE @JMENO_ZALOHY VARCHAR(120)
SELECT @JMENO_ZALOHY = 'E:\backup\BackupSQL\6 Sobota\DAVOSAM_'+ convert( varchar(2), datepart( hh, getdate() ) ) + '00_DEN_FULL.bak'
SELECT @JMENO_ZALOHY
BACKUP DATABASE [DAVOSAM]
TO DISK = @JMENO_ZALOHY
WITH INIT, CHECKSUM, COMPRESSION, MAXTRANSFERSIZE=65536
GO
E:\backup\BackupSQL\6 Sobota\DAVOSAM_2100_DEN_FULL.bak
(1 row(s) affected)
Processed 467240 pages for database 'DAVOSAM', file 'DavosAM_Data' on file 1.
Processed 2 pages for database 'DAVOSAM', file 'DavosAM_Log' on file 1.
BACKUP DATABASE successfully processed 467242 pages in 24.596 seconds (148.411 MB/sec).
select * from sys.dm_exec_connections
where net_packet_size > 8192
session_id most_recent_session_id connect_time net_transport protocol_type
protocol_version endpoint_id encrypt_option auth_scheme
node_affinity num_reads num_writes last_read last_write net_packet_size client_net_address
client_tcp_port local_net_address local_tcp_port
connection_id parent_connection_id most_recent_sql_handle
(0 row(s) affected)
SELECT SUM (pages_allocated_count * page_size_in_bytes)/1024 as 'KB Used', mo.type, mc.type
FROM sys.dm_os_memory_objects mo
join sys.dm_os_memory_clerks mc on mo.page_allocator_address=mc.page_allocator_address
GROUP BY mo.type, mc.type, mc.type
ORDER BY 1 DESC;
KB Used type type
29392 MEMOBJ_SORTTABLE MEMORYCLERK_SQLSTORENG
9392 MEMOBJ_SOSNODE MEMORYCLERK_SOSNODE
8472 MEMOBJ_SQLTRACE MEMORYCLERK_SQLGENERAL
5480 MEMOBJ_SECOLMETACACHE USERSTORE_SCHEMAMGR
5280 MEMOBJ_RESOURCE MEMORYCLERK_SQLGENERAL
5008 MEMOBJ_CACHEOBJPERM USERSTORE_OBJPERM
4320 MEMOBJ_SOSSCHEDULER MEMORYCLERK_SOSNODE
2864 MEMOBJ_PERDATABASE MEMORYCLERK_SQLSTORENG
2328 MEMOBJ_SQLCLR_CLR_EE MEMORYCLERK_SQLCLR
2288 MEMOBJ_SESCHEMAMGR USERSTORE_SCHEMAMGR
2080 MEMOBJ_SOSDEADLOCKMONITORRINGBUFFER MEMORYCLERK_SQLSTORENG
2008 MEMOBJ_LOCKBLOCKS OBJECTSTORE_LOCK_MANAGER
1584 MEMOBJ_CACHESTORETOKENPERM USERSTORE_TOKENPERM
1184 MEMOBJ_LOCKOWNERS OBJECTSTORE_LOCK_MANAGER
840 MEMOBJ_SNIPACKETOBJECTSTORE OBJECTSTORE_SNI_PACKET
760 MEMOBJ_SOSDEADLOCKMONITOR MEMORYCLERK_SQLSTORENG
752 MEMOBJ_SESCHEMAMGR_PARTITIONED USERSTORE_SCHEMAMGR
688 MEMOBJ_RESOURCEXACT MEMORYCLERK_SQLSTORENG
616 MEMOBJ_SOSWORKER MEMORYCLERK_SOSNODE
552 MEMOBJ_METADATADB MEMORYCLERK_SQLGENERAL
480 MEMOBJ_SRVPROC MEMORYCLERK_SQLCONNECTIONPOOL
424 MEMOBJ_SQLMGR CACHESTORE_SQLCP
400 MEMOBJ_SBOBJECTPOOLS OBJECTSTORE_SERVICE_BROKER
384 MEMOBJ_SUPERLATCH_BLOCK MEMORYCLERK_SQLSTORENG
384 MEMOBJ_RESOURCEDATASESSION MEMORYCLERK_SQLGENERAL
352 MEMOBJ_SOSSCHEDULERMEMOBJPROXY MEMORYCLERK_SOSNODE
328 MEMOBJ_SBMESSAGEDISPATCHER MEMORYCLERK_SQLSERVICEBROKER
320 MEMOBJ_METADATADB USERSTORE_DBMETADATA
296 MEMOBJ_INDEXSTATSMGR MEMORYCLERK_SQLOPTIMIZER
264 MEMOBJ_LBSSCACHE OBJECTSTORE_LBSS
224 MEMOBJ_XE_ENGINE MEMORYCLERK_XE
216 MEMOBJ_GLOBALPMO MEMORYCLERK_SQLGENERAL
208 MEMOBJ_PROCESSRPC USERSTORE_SXC
200 MEMOBJ_SYSTASKSESSION MEMORYCLERK_SQLCONNECTIONPOOL
200 MEMOBJ_REPLICATION MEMORYCLERK_SQLGENERAL
192 MEMOBJ_SOSSCHEDULERTASK MEMORYCLERK_SOSNODE
176 MEMOBJ_SQLCLRHOSTING MEMORYCLERK_SQLCLR
168 MEMOBJ_SYSTEMROWSET CACHESTORE_SYSTEMROWSET
128 MEMOBJ_RESOURCESUBPROCESSDESCRIPTOR MEMORYCLERK_SQLGENERAL
128 MEMOBJ_CACHESTORESQLCP CACHESTORE_SQLCP
128 MEMOBJ_RESOURCESEINTERNALTLS MEMORYCLERK_SQLSTORENG
120 MEMOBJ_BLOBHANDLEFACTORYMAIN MEMORYCLERK_BHF
120 MEMOBJ_SNI MEMORYCLERK_SNI
88 MEMOBJ_QUERYNOTIFICATON MEMORYCLERK_SQLOPTIMIZER
72 MEMOBJ_HOST MEMORYCLERK_HOST
72 MEMOBJ_INDEXRECMGR MEMORYCLERK_SQLOPTIMIZER
64 MEMOBJ_RULETABLEGLOBAL MEMORYCLERK_SQLGENERAL
56 MEMOBJ_SERVICEBROKER MEMORYCLERK_SQLSERVICEBROKER
56 MEMOBJ_REMOTESESSIONCACHE MEMORYCLERK_SQLGENERAL
56 MEMOBJ_PARSE CACHESTORE_PHDR
48 MEMOBJ_CACHESTOREBROKERTBLACS CACHESTORE_BROKERTBLACS
48 MEMOBJ_APPENDONLYSTORAGEUNITMGR MEMORYCLERK_SQLSTORENG
40 MEMOBJ_SBASBMANAGER MEMORYCLERK_SQLSERVICEBROKER
32 MEMOBJ_OPTINFOMGR MEMORYCLERK_SQLOPTIMIZER
32 MEMOBJ_SBTRANSPORT MEMORYCLERK_SQLSERVICEBROKERTRANSPORT
32 MEMOBJ_CACHESTOREBROKERREADONLY CACHESTORE_BROKERREADONLY
32 MEMOBJ_DIAGNOSTIC MEMORYCLERK_SQLGENERAL
32 MEMOBJ_UCS MEMORYCLERK_SQLSERVICEBROKER
24 MEMOBJ_STACKSTORE CACHESTORE_STACKFRAMES
24 MEMOBJ_CACHESTORESXC USERSTORE_SXC
24 MEMOBJ_FULLTEXTGLOBAL MEMORYCLERK_FULLTEXT
24 MEMOBJ_APPLOCKLVB OBJECTSTORE_LOCK_MANAGER
24 MEMOBJ_FULLTEXTSTOPLIST CACHESTORE_FULLTEXTSTOPLIST
24 MEMOBJ_CONVPRI CACHESTORE_CONVPRI
16 MEMOBJ_SQLCLR_VMSPY MEMORYCLERK_SQLCLR
16 MEMOBJ_VIEWDEFINITIONS MEMORYCLERK_SQLOPTIMIZER
16 MEMOBJ_SBACTIVATIONMANAGER MEMORYCLERK_SQLSERVICEBROKER
16 MEMOBJ_AUDIT_EVENT_BUFFER OBJECTSTORE_SECAUDIT_EVENT_BUFFER
16 MEMOBJ_HASHGENERAL MEMORYCLERK_SQLQUERYEXEC
16 MEMOBJ_SBTIMEREVENTCACHE MEMORYCLERK_SQLSERVICEBROKER
16 MEMOBJ_ASYNCHSTATS MEMORYCLERK_SQLGENERAL
16 MEMOBJ_BADPAGELIST MEMORYCLERK_SQLUTILITIES
16 MEMOBJ_QSCANSORTNEW MEMORYCLERK_SQLQUERYEXEC
16 MEMOBJ_SCTCLEANUP MEMORYCLERK_SQLGENERAL
16 MEMOBJ_XP MEMORYCLERK_SQLXP
8 MEMOBJ_SECURITY MEMORYCLERK_SQLGENERAL
8 MEMOBJ_CACHESTOREBROKERRSB CACHESTORE_BROKERRSB
8 MEMOBJ_EXCHANGEXID MEMORYCLERK_SQLGENERAL
8 MEMOBJ_CACHESTOREVENT CACHESTORE_EVENTS
8 MEMOBJ_CACHESTOREXPROC CACHESTORE_XPROC
8 MEMOBJ_DBMIRRORING MEMORYCLERK_SQLUTILITIES
8 MEMOBJ_SERVICEBROKERTRANSOBJ CACHESTORE_BROKERTO
8 MEMOBJ_CACHESTOREOBJCP CACHESTORE_OBJCP
8 MEMOBJ_CACHESTOREXMLDBELEMENT CACHESTORE_XMLDBELEMENT
8 MEMOBJ_ENTITYVERSIONINFO MEMORYCLERK_SQLSTORENG
8 MEMOBJ_AUDIT_MGR MEMORYCLERK_SQLGENERAL
8 MEMOBJ_EXCHANGEPORTS MEMORYCLERK_SQLGENERAL
8 MEMOBJ_DEADLOCKXML MEMORYCLERK_SQLSTORENG
8 MEMOBJ_CACHESTORETEMPTABLE CACHESTORE_TEMPTABLES
8 MEMOBJ_HTTPSNICONTROLLER MEMORYCLERK_SQLHTTP
8 MEMOBJ_CACHESTOREVIEWDEFINITIONS CACHESTORE_VIEWDEFINITIONS
8 MEMOBJ_CACHESTOREPHDR CACHESTORE_PHDR
8 MEMOBJ_CACHESTOREXMLDBTYPE CACHESTORE_XMLDBTYPE
8 MEMOBJ_CACHESTORE_BROKERUSERCERTLOOKUP CACHESTORE_BROKERUSERCERTLOOKUP
8 MEMOBJ_EVENTSUBSYSTEM MEMORYCLERK_SQLGENERAL
8 MEMOBJ_CACHESTOREBROKERDSH CACHESTORE_BROKERDSH
8 MEMOBJ_SOSDEADLOCKMONITORXMLREPORT MEMORYCLERK_SQLSTORENG
8 MEMOBJ_CACHESTOREXMLDBATTRIBUTE CACHESTORE_XMLDBATTRIBUTE
8 MEMOBJ_CACHESTOREBROKERKEK CACHESTORE_BROKERKEK
8 MEMOBJ_QPMEMGRANTINFO MEMORYCLERK_SQLQUERYEXEC
8 MEMOBJ_CACHESTOREQNOTIFMGR CACHESTORE_NOTIF
(101 row(s) affected)
David
Maybe you are looking for
-
How to connect documents and icloud ?
How do i connect documents and icloud?
-
I've installed windows in boot camp, how do i start windows
I've Installed windows xp prof. with boot camp and now I'm not sure how to start windows.
-
I´ve searched around for an app that will allow my iPhone to play flash movies, but im pretty new at this so I thought, "Why not ask you guys". So, Is there any app that will play flash movies? Will they add it to the new firmware? When is that comin
-
Did Itunes 10.2 take away the ability to adjust the volume levels on music videos?
-
Windows keeps thinking Premiere is not responding?
Hey guys, so I am curious to know if anyone else has encountered this and how it might be solved. Basically the problem presents itself as Windows immediately greys out Premiere and has the 'This program has stopped responding, please wait while Wi