ColdFusion 8 Enterprise for Sale

I just posted this on Ebay if anyone is interested, it is a real bargain!!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330519090698
or search item#: 330519090698
I am not stopping ColdFusion, in fact I am using it more than ever now, but I no longer need this particular license.  I have cleared this license with Adobe.  I have a copy of that chat if you want reassurance.
Cheers,
John

The version I am selling is not second hand but actually 3rd hand and it works like brand new and served me well for over a year.  Buying software this way (2nd, 3rd hand) makes perfect sense, it allows those of us with limited funds to swim with bigger fish, legally!  This version does not reqiure or even support activation or deactivation. Below is the transcript from Adobe support.  Please contact Adobe (http://www.adobe.com.support.contact) if you have any credible doubts. Any questions?  No transfer is happening.  No copy of the software is being made.  It is uninstalled then reinstalled. Single server usage is its primary limitation. If it were any simpler it would be featured on Sesame Street. 
General Info
Chat start time
Jan 3, 2011 9:58:59 AM EST
Chat end time
Jan 3, 2011 10:13:51 AM EST
Duration (actual chatting time)
00:14:52
Operator
Mahesh
Chat Transcript
info: Thank you for choosing Adobe. A representative will be with you shortly.  Your estimated wait time is 0 minute(s) and 1 second(s) or longer as there are 1 customer(s) in line ahead of you.
info: You are now chatting with Mahesh.
Mahesh: Hello! Welcome to Adobe Customer Service.
Mahesh: Hello John.
John Glynn: Hi!
Mahesh: I understand that you sell your product, hence deactivating it, am I correct?
John Glynn: Yes!
John Glynn: I want to make sure I do this correctly so the pruchaser can use the product and I no longer have any ties to it.
Mahesh: I will be glad to help you with the issue.
Mahesh: Can I have the serial number along with the email address registered with us?
John Glynn: Yes, one moment.
John Glynn: There are 2 serials, as V8 was an upg4rade to MX:
Mahesh: Okay.
John Glynn: CF8: 1185-****-****-****-****-****
John Glynn: MX: CED600 *****-*****-*****
John Glynn: I am double checking these...
Mahesh: Thank you for the serial number.
Mahesh: Please allow me a moment while I check on the information.
John Glynn: I believe the email address associated with these is: [email protected]
John Glynn: The Company is Leadmine Pond Productions, Inc.
Mahesh: Thank you for the information.
Mahesh: I see the serial number 1185-****-****-****-****-**** is for COLDFUSION ENT 8.0 and it does not support activation/deactivation.
John Glynn: It does not work?
John Glynn: I do not understand, I have been using it for over a year now.
Mahesh: John, the serial number is valid but product does not have activation/deactivation, you can directly uninstall and reinstall.
John Glynn: Ah, I see, sorry, I was panicking... So I can uninstall it and then sell it with no problems?
Mahesh: Yes.
John Glynn: (breathing once again)
John Glynn: Thank you!
John Glynn: Have a Happy New Year.
Mahesh: You are welcome.
Mahesh: Wish you the same.
Mahesh: Is there anything else I can help you with?
John Glynn: Thanks, cheers:)
info: Your chat transcript will be sent to [email protected] at the end of your chat.
Mahesh: You may receive an email survey in reference to this interaction with Adobe. Your feedback is very much appreciated.

Similar Messages

  • ColdFusion Developer site for sale

    Post removed: Site Sold

    Two questions - why are you moving away from cf development
    and, are
    exisiting clients part of the deal?
    "spindiggy" <[email protected]> wrote in
    message
    news:estd25$338$[email protected]..
    > Hello,
    > I am moving away from ColdFusion Development. The site
    design,
    > hotfuzion.com,
    > hotfuzion.net, the cms and shopping cart are all for
    sale as a package
    > deal.
    > I'm looking for around $500.00 for all. If interested,
    let me know.
    > [email protected]
    >
    > Chris
    >

  • How many apps can you have for sale with a CC Complete membership? (Not Pro or Enterprise)

    I have the CC complete membership (£46 p/m) I was under the impression I could only have 1 app for sale on the Apple store with this. But I've re-read the guidelines and it says I can have unlimited apps. I've been working on an ipad app, which has ended up exceeding the 100mb limit (I think this limit is new, too) But my app could be divided up logically into 2 or 3 apps for individual publication, so long as each has the $99 fee paid. Do my conclusions sound right, or have I missed something?

    >for sale on the Apple store
    This is Adobe... I think you need to ask Apple about their store policies

  • Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?

    Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?
    For those who have done this,
    1.  What quirks did you find that you had to overcome in your installation (I know that everyone's environment is different and produces differest results)?
    2.  What part of your code broke for which you had to find fixes?
    Tips and suggestions for a smooth installation, besides following the installation document.
    Thanks!

    Create a car (archive file) in CF 9 enterprise which will capture all CF 9 settings like Data sources, Web services etc. Make sure when you are doing this, pop up blocker is disabled.
    NOTE : While creating the archive file, give the full name with the absolute path in the package name. For example C:\Test\mypackage.car
    Then move this car file into the server where you want to install CF 11. Install CF 11 and then  deploy this archive (car) file. All CF 9 settings will be migrated to CF 11 enterprise.
    Else, if you want to install CF 11 on the same server where CF 11 is installed, then remove the connector for all the websites which are configured with CF 9, make sure the CF 9 services are running and then run the CF 11 installer and at the end of CF 11 installation, you will get a dialogue box which will ask you to migrate CF 9 settings in CF 11.
    Run the Code Analyzer in CF 11 Administrator to check whether any the CF 9 code used in your application is breaking in CF 11 or not
    HTH
    VJ

  • ColdFusion 9 Enterprise - Error Connecting to Oracle

    Hi,
    I'm in the process of configuring our production server with ColdFusion 9 Enterprise. The prod build is carried out according to the same build document used to implement our DEV and QA environments which are working correctly.
    When setting up the datasources, I get the following:
    Connection verification failed for data source: sara_eng
    java.sql.SQLNonTransientConnectionException: [Macromedia][Oracle JDBC Driver]Error establishing socket to host and port: ginge.ic.gc.ca:1521. Reason: Connection refused: connect
    The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][Oracle JDBC Driver]Error establishing socket to host and port: ginge.ic.gc.ca:1521. Reason: Connection refused: connect
    Since our production environment is located within a DMZ and our Oracle db is on the other side of the DMZ I consulted with our firewall group to ensure there was a rule for port 1521 between the app and db servers. There is the approriate rule in place. They sent me some log entries which state that the ColdFusion app server is attempting to send a TCP Reset to the Oracle server which the firewall is blocking.
    My current production server is in the same DMZ running ColdFusion MX7 without this issue. Any suggestions?
    Thanks,
    Chad

    You can test if server_ip can connect to database or not:
    sqlplus scott/tiger@server_ip
    if it can not connect to database, check your TNSNAMES.ORA

  • Business Package for Sales or Internet Sales

    Hello:  I am looking for people that have experience working with Business Packages for Sales 60.1.  I believe this is the only package that supports "Internet Sales" scenarios but it requires an ECC 5.0 backend, so I want to find out if the iviews within contain only sapgui or BAPI calls or BSPs or something else like webdynpro or ITS?  I am also wondering if anybody has seen this pacakge work for connecting back to a 472 R/3 backend?
    Thank
    George

    Hello again,
    This is what i did:
    I unzipped the SCA-File and found an EPA-File.
    I imported the EPA-File with the Enterprise Portal:
    SystemAdministration>>Transport>>Import
    Everything looks OK.
    Hope I did the right thing - other opinions?
    Christoph

  • Automatic route determination for sales order

    Defined
    Transportation Zone  sold to party -0000000002
    Shipping conditions -01
    Transportation group in Material master -0001
    Transportation zone ship to party - 0000000003
    Assignment made -
    Dep country zone -0000000002
    Dest country zone -0000000003
    Sc -01
    Transportaion group -0001
    route -zroad
    departure zone and destination zone is assigned to respective customer masters. and above assignment is made in IMG for route determination for order. But when i create the sales order route is not getting determined..i wnet to most of the threads in this form..but could not find a thread for route determination for sales order

    Aju Joseph
    -Do the shipping point detremination  in OVL2.
    -In Route Determination- Maintain Country & Transportation Zone For Shipping Point
    -Here you will find the Shipping point  whatever you have created in Enterprise Structure  which is in grey i.e you cannot change.
    -Just assign the departure zone which you have created in Transportation zone-000000002 to required shipping point & save it.
    --Raise the sales order & check the output
    Let me know if your problem is solved
    Regards
    Pradeep

  • ColdFusion 10 Enterprise Lincese

    Hi
    I would like to migrate me ColdFusion 10 Enterprise 2CPU license to a new VMware server. The issue is VMware doesn't support multi core processors, so the server built with 8 processors.
    Am I allowed to migrate this ColdFusion license to the new server? Do I need to upgrade my ColdFusion License?
    Thanks for your help
    Regards
    MA

    Thanks VJ,
    The clause 3.1.1  explains about the CPU numbers.  The license is directly depend upon the number of CPUs.
    As an example,  one  2 CPU  license is  required for a computer with 2 processors (each 4 cores). The issue with VMware that it maps all cores as separate processors! Means the same server will be identified as a 8 processor machine, so requires to obtain a 8 CPU license.  The license agreement doesn't say anything about VMware installations! 
    Any other thoughts?
    Thanks
    MA
    3.1.1 Adobe grants Licensee a license to install and use the Software as Production Software on a per-CPU basis as provided in a separate writing. The total number of CPUs of all of the Computers on which the Software operates may not exceed the total number of CPUs separately licensed. For purposes of this License Metric, (a) all CPUs on a Computer on which the Software is installed shall be deemed to operate the Software unless Licensee configures that Computer (using a reliable and verifiable means of hardware or software partitioning) such that the total number of CPUs that actually operate the Software is less than the total number on that Computer, and (b) a CPU shall mean a single, physical chip with the capability of housing multiple processor cores. If Licensee purchases a 2-CPU Production Software license, then each CPU to which it applies such license must reside in the same Computer. In the event that Licensee desires to apply 2-CPU Production Software licenses to Virtual Machines, then (c) for the Standard version of the Software, the number of 2-CPU licenses required shall be the greater of the number of available physical CPUs for all instances of the Software divided by two (any fractions shall be rounded up for purposes of this provision), or (ii) the total number of Virtual Machines on all Computers on which the Software is installed, and (d) for the Enterprise version of the Software, the number of 2-CPU licenses required shall be the number of physical CPUs on which the Software operates divided by two (any fractions shall be rounded up for purposes of this provision).

  • Query for Sales Order Analysis

    Dear Experts
    I have written a Query for Sales Order Analysis and would like to have help on this.
    The query is used for generating daily report for Sales Order on number of documents (Sales Order), total amount of sales orders and total GP of Sales Order. The query is written as below:
    SELECT T0.[DocNum], SUM(T0.DocTotal) AS 'Total', SUM(T0.U_Total_GP) AS 'Total GP'
    FROM ORDR T0 WHERE T0.[DocDate] =[%0] GROUP BY T0.[DocNum] ORDER BY T0.[DocNum]
    where U_Total_GP is a UDF for storing the GP of each order.
    After executing the query, a selection criteria of date appears and after a date is selected, the report shown information required. However, the query does not calculate column total for total amount and total GP. Although I know the total for each column can be displayed by pressing "Ctrl" + Click on the column title, it would have to be done from time to time.
    Therefore, I would like to modify my query in order to calculate the column totals when executed. Are there any suggestions for this?
    Thank you
    Regards
    Elton

    Hi Elton,
    Try this:
    SELECT T0.[DocNum], SUM(T0.DocTotal) AS 'Total', SUM(T0.U_Total_GP) AS 'Total GP'
    FROM ORDR T0 WHERE T0.[DocDate] =[%0] GROUP BY T0.[DocNum]
    Union ALL
    SELECT '', SUM(T0.DocTotal) AS 'Total', SUM(T0.U_Total_GP) AS 'Total GP'
    FROM ORDR T0 WHERE T0.[DocDate] =[%0]
    ORDER BY T0.[DocNum]
    Thanks,
    Gordon

  • Workflow for Sales Order Release via Status Profile

    Dear all,
    i want to make a workflow for sales order which have 4 User Status in One status profile.
    Once Event triggered for sales order
    1.   Mail should go to main authority with sales order number.
    2.  Once authority will do some changes in the required field then he/she changes
         the user status-1 from defauts as per line Item and mail should go to department no-1 (Head authority).
    3.  Once again same changes in sales order but now user status-2 from user status-1
         as per line Item and mail should go to department no-2 (Head authority).
    4.  Once again same changes in sales order but now user status-3 from user status-2
         as per line Item and mail should go to department no-3 (Head authority).
    5.  Once again same changes in sales order but now user status-4 from user status-3
         as per line Item and mail should go to department no-4 (Head authority) .
    and parrally for each changes of Status mail should also go to User (Event Creator).
    6. Finally mail sholud go to User as you are permitted to do next business transaction for this sales order
    Please tel me the process as i am very new this topic and i am always going to stuck in Binding.
    please help me out.
    Thank You

    Hi Neeraj,
    First of all start with SWELS and SWEL T-Code to check if any standard event is getting triggered or not. If event is getting triggered, then use the same event to trigger the workflow; otherwise create a custom event of BO and use the same to trigger the workflow.
    Hope you are aware of T-Code SWO1 and delegation of BO. The BO used for your requirement will be BUS2000115.
    As you want the workflow to get triggered only for one status profile and one of its status, so use check function module. There set the condition for you status profile and status.
    The FM which you will be using the most is CRM_ORDER_READ. To read the status, you can also use CRM_STATUS_READ_OW.
    Now simply make the approval steps in the workflow using activity. In the activity, you can use the standard method USERSTATUSPOPUP to send the workitem for approval. In each step use the same activity with different agents as approvers.
    Just go with these things and let me know if you get stuck up somewhere.
    Regards,
    Guddan

  • User exit for  Sales order

    hi,
       i need to eliminate leading zeros for PO number which comes in SO created trough ALE.i found the enhancement for the FM idoc_input_orders.in that enahancement we have 12 FM's.my Leading zeros are comming for field belnr which comes in e1edk01 segment of idoc orders05.now i had coded my part of coding in FM exit_saplved.._oo1 and i had activated that.but it is not working for me.than i tought of going to other FM exit_sapl..._009.in which i'm not able go into the include either.plz help me out.thank you.

    Hi, Krishna!
    With IDOC_INPUT_ORDERS during IDoc interpretation PO number is assigned to XVBAK-BSTKD field which is later used for sales order creation with reference to PO.
    So all you need is to use some customer exit with changing parameters containing XVBAK after IDoc interpretation is completed. For example you can use EXIT_SAPLVEDA_009 which is called at the end of IDoc check after interpretation.
    Regards,
    Maxim.

  • RBA GATP check is not getting invoked for Sales Order

    Hi Everyone,
    RBA GATP check is not getting invoked for Sales order.
    I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
    However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
    I would expect that system would propose the same material in an alternate location where we have stock through RBA.
    Request you to share ideas on this.
    Regards,
    Avijit Dutta

    Hi Avijit,
    You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
    What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
    Thanks,
    Bala.

  • How do I prepare my iMac for sale? And best practice for transferring media to a new system.

    This is my first time posting in a forum, so I will apologize in advance if I'm doing something wrong. I've tried to search for a very clear answer to my questions in the existing discussions, but have not had much luck.
    I ordered a Macbook Pro today and would like to sell my current iMac to supplement some of the cost. I purchased my iMac in March of 2011 with OS X Snow Leopard preinstalled. I've since updated to Mountain Lion. When my computer came in it did not have OS DVDs, so I am not sure exactly how to take it back to factory default and remove ALL of my information safely in order to prepare it for sale. I'm afraid to tell it to format if I am going to need a boot disc/drive to reinstall the OS. I've been trying to research all day and have learned that I will not be able to sell it with the current OS, only the one that came with the computer at the time of purchase (to the best of my understanding).
    Secondary to all of this, I have a question about backing up info and porting it to my new system. I have run the Time Machine backup to my external hard drive. However, I DO NOT want to port it to my new MBP as an image of my past machine. I did that when I got my iMac from my old MBP and my iMac thinks it is a MBP (MBP EFI/SMC Firmware Update Icons in my system utilities folder as well as identified as a Macbook Pro on my network). I've never been able to get all of these things to go away and I feel like it's chewing up hard drive space for no purpose whatsoever. I also worry that it could create system issues that I'm just not savy enough to catch before they are beyond control. That being said, I'd like to begin fresh with my new MBP. What is the best method of bringing my photos from iPhoto and music/movies/books/etc from iTunes to my new system? My word documents are easy enough...I keep 3 flash drives updated with them at all times.
    Thanks in advance!

    Whoever said you can't sell you iMac with the current Mac OS X is wrong, I believe.
    Unfortunately, it is not wrong.
    Any OS purchased/obtained at the app store - as is the case here - is not transferable. The license is tied forever to the Apple ID used to obtain it. The SLA states that the seller needs to erase the drive and reinstall the original system.
    @ Kamikazwe:
    You can call Apple and give them your serial number and they will send you copies of your original disks at a nominal charge.
    You do need to use your original Snow Leopard disk, boot from it, erase the drive, and reinstall Snow Leopard. The buyer of the machine will need to purchase his/her own copy of Lion or Mountain Lion with their own Apple ID or they will never be able to reinstall or update the OS.
    SLA Excerpt:
    3. Transfer.
    A. If you obtained the Apple Software preinstalled on Apple-branded hardware, you may make a one-time permanent transfer of all of your license rights to the Apple Software (in its original form as provided by Apple) to another party, provided that:  the Apple Software is transferred
    together with your Apple-branded hardware; (ii) the transfer must include all of the Apple Software, including all its component parts, printed materials and this License; (iii) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or
    other storage device; and (iv) the party receiving the Apple Software accepts the terms andcconditions of this License. For purposes of this License, if Apple provides an update (e.g., version 10.8 to 10.8.1) to the Apple Software, the update is considered part of the Apple
    Software and may not be transferred separately from the pre-update version of the Apple Software.
    B. If you obtained your license to the Apple Software from the Mac App Store, it is not transferable. If you sell your Apple-branded hardware to a third party, you must remove the Apple Software from the Apple-branded hardware before doing so, and you may restore your system to the version of the Apple operating system software that originally came with your Apple hardware (the “Original Apple OS”) and permanently transfer the Original Apple OS together with your Apple hardware, provided that:  the transfer must include all of the Original
    Apple OS, including all its component parts, printed materials and its license; (ii) you do not retain any copies of the Original Apple OS, full or partial, including copies stored on a computer or other storage device; and (iii) the party receiving the Original Apple OS reads and agrees to
    accept the terms and conditions of the Original Apple OS license.

  • Centralised Report for Sales/Purchase

    Hi guys,
    One of my client needs a Centralised report for Sales & Purchase for a particular period .
    Like we are mainting multiple taxcodes  like
    BED,eCess,HeCEss,
    VAT 4,VAT 2,VAT12.5,
    VAT10.3,TAXEXEMPTED,ETC...
    So every month they need to know total sales and purchase value in a single report to be displayed respective of each tax code
    lie
    Taxcode 1 = tax Value1,total value
    Taxcode 2 = tax value 2,total value
    Total Sales value = Sum of all tax values, sum of total values
    Total Purchase value = Sum of all tax values, sum of total values
    And  needs Item Wise Sales For Each customer.
    I tried in system defined Sales and Purchase analysis report but our client needs the above type of report..
    Pls give us some solution for this..
    Regards,
    Vams

    Hi VamSam......
    Try the below query for purchase details alongwith tax amt.....
    SELECT T0.[DocNum], T0.[DocDate], T0.NumAtCard As 'Bill No.', T0.[CardName], T1.[Dscription], T1.[Quantity], T1.Price As 'Rate', T1.[LineTotal] As 'Value', T0.[DocTotal] As 'Total Value', (ISNULL((SELECT SUM(T2.QUANTITY) FROM rpc1 T2 WHERE T2.DocEntry=T0.DocEntry),0)) RetQTY, (ISNULL((SELECT SUM(T2.LineTotal) FROM RPC1 T2 WHERE T2.DocEntry=T0.DocEntry),0)) RetValue, (isnull((SELECT SUM((case when upper(t4.STACode) like 'BED%' then T4.TaxSum else 0 end))
          FROM PCH4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) ExciseDuty,
         (isnull((SELECT SUM((case when upper(t4.STACode) like 'eCess%' then T4.TaxSum else 0 end))
          FROM PCH4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) ECess,
         (isnull((SELECT SUM((case when upper(t4.STACode) like 'hes%' then T4.TaxSum else 0 end))
          FROM PCH4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) HEdCess, (isnull((SELECT SUM((case when upper(t4.STACode) like 'VAT%' and t4.TaxRate=12.5 then T4.TaxSum else 0 end))
    FROM pch4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) As 'VAT12.5',
    (isnull((SELECT SUM((case when upper(t4.STACode) like 'VAT%' and t4.TaxRate=4 then T4.TaxSum else 0 end))
    FROM pch4 T4 WHERE T4.DocEntry=T0.DocEntry ),0))VAT4, (isnull((SELECT SUM((case when upper(t4.STACode) like 'VAT%' and t4.TaxRate=2 then T4.TaxSum else 0 end))
    FROM pch4 T4 WHERE T4.DocEntry=T0.DocEntry ),0))VAT2, (isnull((SELECT SUM((case when upper(t4.STACode) like 'CST%' and t4.TaxRate=2 then T4.TaxSum else 0 end))
    FROM pch4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) As 'CST2',
    (isnull((SELECT SUM((case when upper(t4.STACode) like 'CST%' and t4.TaxRate=4 then T4.TaxSum else 0 end))
    FROM pch4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) As 'CST4', T2.TransCat As 'Form No.'  FROM OPCH T0  INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN PCH12 T2 ON T0.DocEntry = T2.DocEntry WHERE (T0.[DocDate]>='[%0]' and T0.[DocDate]<='[%1]')
    Regards,
    Rahul

  • Crystal Report for Sales, Delivery and Payment.

    Hi Guys,
    Need some expert advice over here. Currently, our sales team are using 3 separate report, one report on sales per month for each specific customers, one report on delivered amount per month for specific customers again and the last one report on payment received per month for specific customers as well.
    We have the idea of joining this 3 report so that I can report on sales, delivery and payment all at once so that they can see the trend better. However, after trying for quite a few times, we fail to create a common joining between ORDR, ODLN and ORCT. Is there any possible way to work something out ?
    I have thought of using subreport, but I just cant find the way to plug in the figure correctly.
    Need some advice over there.
    Thank you.
    Best Regards,
    Alex

    Based on what you have told me, then you should then join Sales Order, Delivery, Invoice and Incoming Payments into one.
    The reason I say Invoice table also is because, you cannot directly link Delivery and Incoming Payments window.
    Also you it is not enough that you link the ORDR, ODLN and ORCT, you will need to get the details from RDR1 and DLN1.
    In SAP Business One, each line in SAP Business One can have a different Delivery documnet.
    The TrgetEntry, TargetType will give you this information. For example, if a line for Sales Order has TargetType 15, then TrgetEntry will be the DocEntry in the ODLN. But if it TargetType is 13 it means the Sales order was converted directly to and Invoice and bypassed the creation of Delivery step, which is possible in SAP.
    So here is how I think you will need to link Sales order and Delivery
    RDR1.TrgetEntry INNER JOIN DLN1.DocEntry AND
    RDR1.TargetType INNER JOIN DLN1.ObjType AND
    RDR1.LineNum INNER JOIN DLN1.BaseLine
    Now this could get a little more complicated if you do partial deliveries. For example if a line in your Sales Order has say 10 items and 6 of them are delivered using Delivery Note 123 and the remaining are delivered using Delivery Note 124, then the join will give you 2 different lines.
    So basically you will need to link the tables in this fashion
    ORDR <-> RDR1 <-> DLN1 <-> INV1 <-> RCT2 <-> ORCT
    Unfortunately, this linking process can get complicated if you do not follow certain steps, like for example if you do not create a Delivery Note and converted your Sales order to Invoice. Then the link would be
    ORDR <-> RDR1 <-> INV1 <-> RCT2 <-> ORCT
    I hope I didn't confuse you.
    Krishnan

Maybe you are looking for