ColdFusion Builder plugin console

I just don't understand what I am doing wrong here. I updated ColdFusion builder as a plugin installed in 3.5.1. I also have Flex 3 /subclipse and a few other plugins installed. When I restart my localhost or want to view orm sql logged to the console, nothing appears. After a restart I get this.
[localhost]:(12/18 at 09:54:11) Server is available. Getting server settings from Server
[localhost]:Error(12/18 at 09:54:12) Unable to fetch server mappings.
[localhost]:Error(12/18 at 09:54:12) Unable to get the log directory.
On my laptop (at home and work) I have Builder running as standalone and this works fine on both of them. What can I do to fix this? I really like logging info to the console.

Can you try to remove the server settings and put them in again. (This worked for me once, but it was in beta 2. Now running Beta 3 so I cannot imitate your scenario to validate it as a fellow user. )

Similar Messages

  • Help : installer has detected one or more adobe coldfusion builder plugins

    I uninstalled coldfusion builder from flash builder and then when re-install I get a  message:
    installer has detected one or more adobe coldfusion builder plugins  ....etc
    How do I fix this?

    As a caution to save your time please follow the following release note:
    82284 -   If you install ColdFusion Builder as a plug-in to Flash Builder and decide to uninstall ColdFusion Builder, make sure ColdFusion perspective is not active in Flash Builder. Failing which, some features may not work after restarting Flash Builder or ColdFusion Builder's perspective will not come up if installed again.
    I did the wrong thing here and I can't ever get coldfusion to reappear after unstalling into FB

  • ColdFusion Builder won't start at all

    After installing Coldfusion Builder and Flash Builder as standalone installations on WinXP, I can't start either of them.
    In the Coldfusion Builder folder where the the .exe is located, I get the hs_pid.log log files that you would normally see from a problem in eclipse. I get the same exact problem with Flash Builder with the same hs error logs after the program fails. Obviously they are suffering the same problem and the root of the problem is the embedded eclipse they are using.
    Any ideas? I realize that it would be difficult to debug considering the complete lack of details about why the apps fail. That's due to Adobe offering no user feedback when they fail.
    My guess is that it's a problem with the JRE in the installs, but there's no debugging info to find out what is going on. When I try FlashBuilderC.exe standalone, I get the following:
    C:\Program Files\Adobe>"Adobe Flash Builder 4\FlashBuilderC.exe"
    # A fatal error has been detected by the Java Runtime Environment:
    #  Internal Error (os_windows.cpp:3266), pid=19764, tid=26520
    #  Error: DuplicateHandle failed
    # JRE version: (uninitialized)
    # Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode, sharing windows-x86 )
    # An error report file with more information is saved as:
    # C:\Program Files\Adobe\hs_err_pid19764.log
    # If you would like to submit a bug report, please visit:
    #   http://java.sun.com/webapps/bugreport/crash.jsp
    I can run Flashbuilder as an eclipse plugin, and I suspect that I could run CFBuilder as a plugin also but that's not really what I want to do. It's just frustrating that products that cost thousands of dollars fail silently, offer no recovery, and won't run at all from a fresh standalone install.

    I'm using 1.6 for my Java stuff and for the plugin versions of CFB and FB4. Each builder standalone has it's own JRE which appears to be the same version (except for FB4 which is only a couple builds off). Both builders reference the same internal error file os_windows.cpp. As I mentioned earlier, both IDEs are currently running fine as eclipse plugins in my home directory.
    U:\>java -version
    java version "1.6.0_18"
    Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
    Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode, sharing)
    C:\Program Files\Adobe\Adobe ColdFusion Builder\jre\bin>set PATH=
    C:\Program Files\Adobe\Adobe ColdFusion Builder\jre\bin>.\java.exe -version
    java version "1.6.0_18"
    Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
    Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
    C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin>set PATH=
    C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin>.\java.exe -version
    java version "1.6.0_16"
    Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
    Java HotSpot(TM) Client VM (build 14.2-b01, mixed mode)
    hs_err_pid27396.log
    # A fatal error has been detected by the Java Runtime Environment:
    #  Internal Error (os_windows.cpp:3276), pid=27396, tid=29696
    #  Error: DuplicateHandle failed
    # JRE version: (uninitialized)
    # Java VM: Java HotSpot(TM) Client VM (16.0-b13 mixed mode, sharing windows-x86 )
    # If you would like to submit a bug report, please visit:
    #   http://java.sun.com/webapps/bugreport/crash.jsp
    ---------------  T H R E A D  ---------------
    Current thread is native thread
    Stack: [0x00030000,0x00130000],  sp=0x0012fba4,  free space=3fe0012fbb4k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    V  [jvm.dll+0x1f4000]
    V  [jvm.dll+0xa1cc8]
    V  [jvm.dll+0x17d0e3]
    V  [jvm.dll+0x1030a0]
    C  [eclipse_1206.dll+0x501e]
    C  [eclipse_1206.dll+0x4721]
    C  [eclipse_1206.dll+0x152c]
    C  [CFBuilder.exe+0x1495]
    C  [CFBuilder.exe+0x1181]
    C  [CFBuilder.exe+0x4a3a]
    C  [kernel32.dll+0x17077]
    ---------------  P R O C E S S  ---------------
    VM state:not at safepoint (not fully initialized)
    VM Mutex/Monitor currently owned by a thread: None
    Dynamic libraries:
    0x00400000 - 0x0040e000     C:\Program Files\Adobe\Adobe ColdFusion Builder\CFBuilder.exe
    0x7c900000 - 0x7c9b2000     C:\WINNT\system32\ntdll.dll
    0x7c800000 - 0x7c8f6000     C:\WINNT\system32\kernel32.dll
    0x6f000000 - 0x6f06c000     C:\WINNT\system32\SYSFER.DLL
    0x7e410000 - 0x7e4a1000     C:\WINNT\system32\USER32.dll
    0x77f10000 - 0x77f59000     C:\WINNT\system32\GDI32.dll
    0x773d0000 - 0x774d3000     C:\WINNT\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww _35d4ce83\COMCTL32.dll
    0x77c10000 - 0x77c68000     C:\WINNT\system32\msvcrt.dll
    0x77dd0000 - 0x77e6b000     C:\WINNT\system32\ADVAPI32.dll
    0x77e70000 - 0x77f02000     C:\WINNT\system32\RPCRT4.dll
    0x77fe0000 - 0x77ff1000     C:\WINNT\system32\Secur32.dll
    0x77f60000 - 0x77fd6000     C:\WINNT\system32\SHLWAPI.dll
    0x76390000 - 0x763ad000     C:\WINNT\system32\IMM32.DLL
    0x10000000 - 0x1001e000     C:\WINNT\system32\privman32.dll
    0x7c9c0000 - 0x7d1d7000     C:\WINNT\system32\SHELL32.dll
    0x72000000 - 0x72014000     C:\Program Files\Adobe\Adobe ColdFusion Builder\plugins\org.eclipse.equinox.launcher.win32.win32.x86_1.0.200.v20090519\eclipse_12 06.dll
    0x77c00000 - 0x77c08000     C:\WINNT\system32\VERSION.dll
    0x6d8b0000 - 0x6db47000     C:\Program Files\Adobe\Adobe ColdFusion Builder\jre\bin\client\jvm.dll
    0x76b40000 - 0x76b6d000     C:\WINNT\system32\WINMM.dll
    0x7c360000 - 0x7c3b6000     C:\WINNT\system32\MSVCR71.dll
    0x76bf0000 - 0x76bfb000     C:\WINNT\system32\PSAPI.DLL
    VM Arguments:
    java_command: <unknown>
    Launcher Type: generic
    Environment Variables:
    JAVA_HOME=C:\java\jdk1.6.0_18\jre
    JRE_HOME=C:\java\jdk1.6.0_18\jre;C:\java\jre6
    CLASSPATH=.;JDK_HOME;JAVA_HOME;C:\java\jre6\lib\ext\QTJava.zip
    PATH=C:/Program Files/Adobe/Adobe ColdFusion Builder/jre/bin/client;C:/Program Files/Adobe/Adobe ColdFusion Builder/jre/bin;C:\Program Files\Adobe\Adobe ColdFusion Builder;C:\java\jdk1.6.0_18\bin;C:\java\jdk1.6.0_18\lib;C:\java\jdk1.6.0_18;C:\java\jdk1. 6.0_18\jre;C:\java\flex_sdk_4\bin;C:\java\flex_sdk_4\;C:\Program Files\Serena\Dimensions 10.1\CM\prog;C:\servers\subversion;C:\Ent\Appl\Prod\Oracle8i\bin;c:\ent\appl\prod\Oracle8 i\JRE\bin;C:\WINNT\system32;C:\WINNT;C:\Serena\CHANGE~1\DIMENS~1\9.1\PROG;c:\ent\appl\prod \perl\5.00502\bin\MSWin32-x86;c:\ent\appl\prod\perl\5.00502\bin;C:\WINNT\system32\wbem;c:\ ent\appl\prod\bin;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\ATI Technologies\ATI.ACE\;C:\DSM\Script\;C:\ent\appl\prod\Exceed\Connectivity\10.00\Accessori es\;;C:\servers\cake\cake\console;C:\servers\xampplite\php;C:\java\apache-maven\bin;C:\jav a\ant\bin;C:\Program Files\CA\SC\CAWIN;C:\Program Files\ActivIdentity\ActivClient\;C:\Program Files\QuickTime\QTSystem\;C:\servers\SDK\bin;C:\Program Files\IDM Computer Solutions\UltraEdit\
    USERNAME=pritcjm
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 6, GenuineIntel
    ---------------  S Y S T E M  ---------------
    OS: Windows XP Build 2600 Service Pack 3
    CPU:total 2
    Memory: 4k page, physical 3652840k(1812720k free), swap 7137288k(4992188k free)
    vm_info: Java HotSpot(TM) Client VM (16.0-b13) for windows-x86 JRE (1.6.0_18-b07), built on Dec 17 2009 13:35:55 by "java_re" with MS VC++ 7.1 (VS2003)
    time: Thu Apr 29 08:52:56 2010
    elapsed time: 0 seconds

  • ColdFusion Builder Update 1 issue on Mac

    If you are running ColdFusion Builder Plugin inside Flash Builder 4 on Mac, and you check for updates and install CFB Update 1, make sure you close FB4 before installing the update.  If not, it will blow up your CFB plugin in FB4 and you'll have to reinstall CFB.
    Instead of using the check for CFB updates inside FB4/Eclipse,I had to:
    1) close FB4.
    2) Run Adobe Updater outside FB4
    3) Download CFBuilder Update 1 and install it.
    4) Then re-open FB4 again
    Don Kerr
    Manager, Houston Space City Adobe User Group
    http://spacecity.groups.adobe.com

    If you are running Panther, you already have that firmware update.  No iMac PowerPC can run 10.2 or later without the most current firmware on their system.

  • ColdFusion Builder Perspective in Eclipse

    I have just downloaded the lastest version of Eclipse to try the ColdFusion builder as a plug-in in my trial copy. I want to see if working within this environment with the subversive plugin also (not installed yet) would be a productive solution for me.
    However, I can't get the ColdFusion builder perspective. Eclipse can't tell it's there. I have been searching for a solution for three days and have yet to find anything close to an answer. I've even tried removing eclipse completely and uninstalling and reinstalling the ColdFusion builder plugin, all to no avail. It seems it should be easier to install this. I'm at a complete loss as to what to do to fix this.

    since your eclipse files and workspace/s are all run on the
    java runtime environment and all configurations are saved at the
    file level (no registry edits etc.), it's not uncommon to have
    different eclipse versions in different folders running different
    sets of plugins, defaulting to different workspaces, etc.
    That's the long way of me suggesting a new install in a
    different folder and trying it from scratch. If it has the same
    behavior, you might try a different version of java.

  • ColdFusion Builder 3 Mac Eclipse Plugin

    I have been trying numerous ways to install CFBuilder 3 Trial into Eclipse 4.2.2 on Mac (Yosemite) and just cannot get CFBuilder to load the CF Perspective. I have tried in various Eclipse versions, and in multiple orders including just installing CFBuilder Trial Edition without in a clean 4.2.2 Eclipse from clean CF install (plugin only, but tried also installing full CFBuilder app both before and after plugin installation, rebooting between each install) and new workspace.
    My ultimate goal is to also install Flash Builder 4.7 into the same Eclipse app, but am starting with CFBuilder since Flash Builder installs successfully. Note that this question is ONLY for the ColdFusion Builder 3 installation alone without Flash Builder installed on the machine.
    Bottom line: I just cannot get CFBuilder 3 to load into Eclipse 4.2.2 and show the CF Perspective even though it appears to be a successful plugin install; I am starting Eclipse either from both the plugin directory's shortcut and from the eclipse app itself - neither work.
    Does anyone have a clue whether this can be done on a Mac?

    Milan...
    My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
    Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
    Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
    I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
    All the while, my font and color customizations have remained the way I set them.
    So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
    I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
    Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
    Dan

  • Flash builder 4 plugin broke inside coldfusion builder

    I installed flash builder 4   into coldfusion builder  as a plugin but I can;t see anyway to run or debug flex applications in the flex perspective.

    Hi,
    Not sure if it will help with this particular problem, but if you haven't seen it already, there's some info here about how to work around a similar compatibility issues with FB4 and CFB sharing the same copy of eclipse:
    http://forums.adobe.com/message/2828427#2828427
    I realize that the thread above is about installing CFB into Flash Builder, and that's the opposite from how you installed it. There are at least 4 different ways to install the two products:
    http://www.adobe.com/devnet/coldfusion/articles/cfbuilder_flashbuilder4_workflow_02.html
    I'm not clear on which combination works most reliably though (CFB into FB4, FB4 into CFB, or separate installs), but will ask around internally to see if we have some more explicit recommendations to offer.
    -Chris

  • Can I install Coldfusion Builder as a plugin for Flash Builder?

    I already have a licensed copy of Flash Builder 4.x installed, trying to install ColdFusion Builder as a plugin for Flash Builder. When I installed CFB, I selected install as a eclipse plugin and entered the path to the FB directory. Now I can't figure out how to invoke/add the CFB plugin in FB..
    Thanks in advance

    You should have uninstalled rather than simply deleting CFB 2 plugins manually .
    Please do the following  to fix it now. (If you have used Uninstaller to uninstall that would have cleaned all these things ):
    Take a backup and delete the file: /Library/Application Support/Adobe/Uninstall/{b8c666c3-1efd-11b2-bf3c-e04be4b2b610}.db
    And you will be able to install CFB as plugin to Eclipse now.
    Thanks,
    Krishna

  • ColdFusion Builder 3 Settings Reset on Restart

    I've downloaded the ColdFusion Builder 3 trial and am experiencing some odd and very annoying behavior.
    I've customized some code editor text font and color settings. I've added an entry to the CF Servers panel for an instance of ColdFusion 10 running inside a VMWare virtual server on my laptop.
    When I restart Eclipse, all the code customizations I've made are reverted back to the default install settings and the entry in my CF Servers panel is gone.
    I've been an IntelliJ user for well over a year, but in doing much more cfscript-based development the CF Plugin for IntelliJ is proving to be a hindrance so I thought I'd give CFB 3 a try and see if there were any improvements over CFB 2. However, I can't take this kind of behavior. Hopefully someone can give me a setting or someone else has seen this before and can give me an idea of where to start looking.
    I have CF Builder installed as a plugin into Eclipse Kepler 64-bit for Mac. I added the CF Builder update site and have updated to CF Builder 3.0.0.290000. I also previously installed as the standalone version with no additional plugins and experienced the same behavior.
    Anyone have any ideas?
    Thanks,
    Dan

    Milan...
    My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
    Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
    Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
    I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
    All the while, my font and color customizations have remained the way I set them.
    So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
    I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
    Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
    Dan

  • How do I remove this stupid *&^$ Tasktop program from my ColdFusion Builder 2?

    I do not need it, I do not want it, and somehow I accidentally installed it. I can find no uninstall button, it's not in my Vista Programs and Features to uninstall, and I"m tired of waiting for it during application load and getting in the way of my shortcuts and whatnot. I just want it gone but I can find no reference anywhere to take this stupid program out.

    RLS,
    Are you running the latest version of CF Builder by any chance (2.0.1)?  If not, you might want to download and install it.  It actually uninstalls the previous version of CF Builder (2.0.0) and installs the new version (becuase 2.0.1 uses a newer major build of Eclipse).  This will allow you to start with a "clean slate" when it comes to which add-ons are installed, but it should maintain all of your project settings.
    Another idea, although this one could be pretty dangerous.  If you feel comfortable trying this, close CF Builder and:
    Make a copy of your \Program Files\Adobe\Adobe\ColdFusion Builder 2\features and \Program Files\Adobe\Adobe\ColdFusion Builder 2\plugins folders as a backup. 
    Make copies of \Program Files\Adobe\Adobe ColdFusion Builder 2\configuration\org.eclipse.equinox.simpleconfigurator\bundles.info and \Program Files (x86)\Adobe\Adobe ColdFusion Builder 2\configuration\org.eclipse.update\platform.xml as backups.
    Browse each of those folders from step 1 and find any folders and files with "Tasktop" in the name.  Delete just those files and folders.
    Open \Program Files\Adobe\Adobe ColdFusion Builder 2\configuration\org.eclipse.equinox.simpleconfigurator\bundles.info in a text editor and remove lines that have references to Tasktop.
    Open \Program Files (x86)\Adobe\Adobe ColdFusion Builder 2\configuration\org.eclipse.update\platform.xml in a text editor and remove lines that have references to Tasktop.
    Launch CF Builder.
    If CF Builder wont' run after that, revert the folders and files to the copies you made in steps 1 and 2 above.
    Good luck,
    -Carl V.

  • Mac OS X 10.9 ColdFusion Builder 2

    I would like to know if anyone has any issues installing or using ColdFusion Builder 2 since the recent release of the new version of Mac OS X 10.9 Mavericks.

    Hi,
    Thanks so much for your post.
    Well today I re-installed Flash Builder 4 & ColdFusion Builder(as I got the student licence). I fist installed Flash Builder 4, and then I installed ColdFusion Builder as a plugin into Flash Builder 4, and it works!
    I am so happy. Maybe I should of tried the eclipse way again, but I heard many people on twitter saying this way worked for them with no issues, and it did for me too, I am so happy
    thanks so much for your help,
    Johnny

  • Coldfusion Builder beta 3 and Subclipse

    Has anyone experienced problems with their working copy getting corrupted? The combination of coldfusion builder and subclipse plugins for my Eclipse 3.5.1 keeps causing me to have checksum and other errors when trying to update or commit. Am I the only one with these issues or are other having them, too?

    Try to reinstall from subclipse plugin
    http://subclipse.tigris.org/servlets/ProjectProcess;jsessionid=5A6C1A9EF0E5933BD72C16B9501 84B37?pageID=p4wYuA

  • Coldfusion Builder Updates?

    I'm guessing that Help>Check for Updates is just a tease. It seems like the only way to get ColdFusion Builder 2 Update 1 is to download the trial, uninstall my current version, and install the new version? Is this correct? Or is there a better way?
    Thanks.

    Adding to what Konatala helpfully offers here, I want to speak to Michael’s wondering why the Help>”check for updates” seems “just a tease”. It’s worth keeping in mind that CFBuilder is not something that Adobe built entirely on their own. Rather, CFB is actually an extension of the underlying open source Eclipse project (and also has components of the commercial Aptana plugin for Eclipse).
    So many menus and other features you’d find in CFB are not therefore necessarily “from Adobe” and “related to” CFBuilder specifically, but are rather there because they are features of Eclipse, or Aptana. This “check for updates” is an example. It’s related to updates to Eclipse itself, as well as plugins that use that mechanism to be updated.
    But beyond that, one might reasonably ask “ok, well why then does it not at least offer updates to CFB itself, even if in addition to other Eclipse/Aptana features?” I can’t answer that. It is unfortunate, and I’ve not seen any good explanation for that. Maybe someone from Adobe might see this someday and offer a thought.
    Hope that’s helpful.
    /charlie

  • The internal html viewer is not working in coldfusion builder 2.

    It is so frustrating how hard this is. I finished setting up coldfusion and coldfusion builder 2 with an apache local webserver and was hoping to make use of the internal html viewer but it won't come on! All I see is a blank grey page with no content. After creeping around the forums for a while it seemed that the simplest solution was to use the internal coldfusion server so I uninstalled everything and did just that, reverting my administrator page to http://localhost:8500/CFIDE/administrator/index.cfm (working and launchable from the IDE), placing my webroot at C:\ColdFusion9\wwwroot and with all the folders in their right place. The server is running ok and when I launch the run as "coldfusion administrator" option to run my index file, it succesfully opens the external browser and displays the page.
    I have the same setup on my desktop at home, the same files, installation, everything! and it works but not on my laptop. I followed Ben Forta's instructions to a T and yet I still am not getting the html preview. I even tried to hard code the absolute url in the html preview settings and still nothing but that annoying grey.
    Is this a bug? There doesn't seem to be anything about it in the bug reports. It is quite infuriating how something that seems so miniscule could be such an annoyance. I have already gotten quite used to the preview pages and coldfusion and I would prefer to code that way rather than making use of dreamweaver which I feel I am being forced to use, but at least it's consistent.
    Please if anyone could provide some answers and help I would really appreciate it! I have only so much hair left!
    Thanks!

    Perhaps others may recognize and resolve this for you. I and others here often can and do offer quick solutions to many problems. And I can appreciate that it’s reasonable to think that something so simple should just work. But in this case I think are simply too many variables that could explain why things are not working for you. And while I can also appreciate that you will prefer to get a solution for free if anyone can offer it, I just can’t even begin to offer all the possible problems and solutions, at least by email, in this case. Again, maybe someone else will make a quick connection.
    But I will point out that if you’re willing to pay US$75, I offer a service of remotely troubleshooting any one CFBuilder problem for that fixed price. Hopefully I might help you solve it quickly (when I can see exactly what’s going on in your environment), but you will not pay if I don’t solve the problem in up to 2 hours effort. If you may be interested, see www.carehart.org/consulting/ for more, and if you want to set up a time to get together (over the web), drop me an email at [email protected]
    Finally, please note that I don’t often point out this service here on the forums. I generally just offer suggestions (sometimes lengthy ones) without any commercial expectation, so please don’t regard this as me engaging in “abusive unsolicited commercial email”. I’m just offering a possible solution, given the OPs sincere challenge in solving things.
    /charlie

  • Plugin console wont open drives

    In 2.7, I can't seem to find a way for users to directly access drives connected via the new "login script parser" feature. Neither of the two ways I'd expect are working:
    1) When I go to the plugin console, I can see the drives from the login script listed. I cannot open them from there. Double clicking the drive does nothing. I cannot open any of the other "Kanaka Identity Driven Access" shares either. I'm not sure if that is by design. If I were to use the Kanaka Client app instead of the plugin, I can double click the drive and open it.
    2) I can get folders added to the dock via MCX for the shares mounted via "Kanaka Identity Driven Access" but not for the login parser. I don't see any option to do this for login script drives.
    One way or another, we need to be able to open those drives. Maybe I'm missing something because this seems to make the new feature useless to plugin users.

    jkillebrew,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

Maybe you are looking for