ColdFusion Builder 3 Settings Reset on Restart

I've downloaded the ColdFusion Builder 3 trial and am experiencing some odd and very annoying behavior.
I've customized some code editor text font and color settings. I've added an entry to the CF Servers panel for an instance of ColdFusion 10 running inside a VMWare virtual server on my laptop.
When I restart Eclipse, all the code customizations I've made are reverted back to the default install settings and the entry in my CF Servers panel is gone.
I've been an IntelliJ user for well over a year, but in doing much more cfscript-based development the CF Plugin for IntelliJ is proving to be a hindrance so I thought I'd give CFB 3 a try and see if there were any improvements over CFB 2. However, I can't take this kind of behavior. Hopefully someone can give me a setting or someone else has seen this before and can give me an idea of where to start looking.
I have CF Builder installed as a plugin into Eclipse Kepler 64-bit for Mac. I added the CF Builder update site and have updated to CF Builder 3.0.0.290000. I also previously installed as the standalone version with no additional plugins and experienced the same behavior.
Anyone have any ideas?
Thanks,
Dan

Milan...
My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
All the while, my font and color customizations have remained the way I set them.
So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
Dan

Similar Messages

User Settings reset upon restart! everytime!

I just bought a MBP several weeks ago and I am very happy with it , BUT , after a recent software update everytime my computer shuts down or I restart it completly resets my dock and every user setting I applied almost like a fresh system restore. None of my HD files are missing but none of my configurations are saved. Something im missing? thanks for your help.

sorry for flaming my own thread.. but i cant shut off my computer or it will completly rease the hour or so of work I put into personalizing everything on my Mac. Im not usuing any bogus buggy software or anything , just normal user configs.. but everytime it shuts down , restarts.. I have a fresh user interface and nothing is saved! its getting to be a pain , so if you read this please.. let me know if you can help.

HT204079 Notifications reset on restart. How do I get my settings to stay?

Just like the title, the settings reset after every restart. HELP!!

Do a backup.
Quit the application System Preferences.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

TS1559 i hav an iphone 4s and its wifi is greyed out (dimmed). I tried by resetting the network settings and also restarted my device but it didn't worked. but i haven't unlocked my phone yet and im running it in ios 6.1.3. now wat to do?

i hav an iphone 4s and its wifi is greyed out (dimmed). I tried by resetting the network settings and also restarted my device but it didn't worked. but i haven't unlocked my phone yet and im running it in ios 6.1.3. now wat to do?

Just an update it is a hardware issue and very common for iPhone 4s. I have to get my phone rewired which basically means new wireless chip. The amount of money I spent on buying an iPhone I should not expect to have anyway hardware problems happening. Make sure you have a warranty as luckily I've saved myself from spending more money to get this problem fixed.

ColdFusion Builder 3 Mac Eclipse Plugin

I have been trying numerous ways to install CFBuilder 3 Trial into Eclipse 4.2.2 on Mac (Yosemite) and just cannot get CFBuilder to load the CF Perspective. I have tried in various Eclipse versions, and in multiple orders including just installing CFBuilder Trial Edition without in a clean 4.2.2 Eclipse from clean CF install (plugin only, but tried also installing full CFBuilder app both before and after plugin installation, rebooting between each install) and new workspace.
My ultimate goal is to also install Flash Builder 4.7 into the same Eclipse app, but am starting with CFBuilder since Flash Builder installs successfully. Note that this question is ONLY for the ColdFusion Builder 3 installation alone without Flash Builder installed on the machine.
Bottom line: I just cannot get CFBuilder 3 to load into Eclipse 4.2.2 and show the CF Perspective even though it appears to be a successful plugin install; I am starting Eclipse either from both the plugin directory's shortcut and from the eclipse app itself - neither work.
Does anyone have a clue whether this can be done on a Mac?

Milan...
My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
All the while, my font and color customizations have remained the way I set them.
So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
Dan

ColdFusion Builder plugin console

I just don't understand what I am doing wrong here. I updated ColdFusion builder as a plugin installed in 3.5.1. I also have Flex 3 /subclipse and a few other plugins installed. When I restart my localhost or want to view orm sql logged to the console, nothing appears. After a restart I get this.
[localhost]:(12/18 at 09:54:11) Server is available. Getting server settings from Server
[localhost]:Error(12/18 at 09:54:12) Unable to fetch server mappings.
[localhost]:Error(12/18 at 09:54:12) Unable to get the log directory.
On my laptop (at home and work) I have Builder running as standalone and this works fine on both of them. What can I do to fix this? I really like logging info to the console.

Can you try to remove the server settings and put them in again. (This worked for me once, but it was in beta 2. Now running Beta 3 so I cannot imitate your scenario to validate it as a fellow user. )

ColdFusion Builder lacking bug fix updates

I have to say that since the product was officially launced, we had one small update that provided a few fixes.
The question I need to ask is what about these more serious bugs that are stopping this product from being great?
There are about 30+ bugs listed on the bug tracker that have been there for over 18 months that are still major problems today, some of these I consider major and should be pushed to getting fixed as quickly as possible.
The number one pet hate of mine is wasting time with an Application that doesn't work correctly, so how does this affect ColdFusion Builder?
Lets look at setting up of servers on ColdFusion Builder, this has got to be the number one most used and needed feature of this product and yet it doesn't work and has so many reported bugs that I would have thought that these would be fixed by now.
If one is lucky, you can setup a server and start and stop this from within Builder. However I can tell you that even when you have it setup, it will stop working as well.
Lets look at what I have setup at the moment.
I have had ColdFusion 9 and 9.01 installed and still donot mange to be able to start and stop the server.
I now have a mutli server version of ColdFusion 9.01 locally, and was able to get this to work briefly. And now it no longer works, with no changes to any of the settings. Don't get me started on remote servers, these are even worser trying to get working.
And even if you do make changes to the server setup in builder, you have to close and restart the Application. This is not acceptable to me either.
I could go on about how much of a hit and miss this feature actually is.
So the question is if this a feature that people would want to buy this product, why is there no fixes for the problems that are still there after 18 months?

Yes they where, they were reported in ColdFusion 7 beta program, ColdFusion beta program and ColdFusion 9 beta program.
When it is reported that many times, and nothing is done what sort of confidence do you think this gives us users of the product?
During the ColdFusion 9 beta program, the cfgrid had many problems that had been reported in CF8 beta program and was again reported and we had been told it was fixed. Did it get released with the initial 9.0 version? No it didn't, did it get released with the 9.01 beta program? No it didn't.
Again what sort of confidence does this give people in this product?
I even fought hi and low with Adobe to get these grid problems fixed, not only did they break more things but it was not even backward compatible. Evey person I spoke to refused to fix it, becuase I did not have paid support. This even went as far as Adam, and Kevin Lynch because I got feed up with the fact that 9.0 got released and it broke our application to the point when we fixed one thing it broke another, to the point that we could not get at the source of ColdFusion to fix the problem.
Each and every time we were told there was a work around, and no work around was ever produced.
When 9.01 was released was it fixed? No it wasn't, in fact it was even worse. And the answer again from Adobe was that unless we have paid support it will not get fixed.
So Ray the answer is very simple, Adobe is not interested in providing more patches / hot fixes past the intial ones they have always released. Even it it effects people from moving upto the latest version...
I can provide many examples of emails from employees of Adobe, that say the same thing no paid support no fix. Now we have to wait another 2 years and wait to see if these problems get fixed, and to me I am sorry that is not an issue that one should have to endure. When talking to people about ColdFusion the same problems exist each and every time, the lack of support and problems that never get fixed puts people off from keeping on buying the product and they end up moving on.
I have been in two companies that began their days as ColdFusion developers, and both companies ended up moving on because of these problems I have outlined. I can understand a company like Adobe needing to make money, but at the end of the day they will continue to loose money because people will look at other options that are better supported, have more outfixes and updates.
The amount of updates that Microsoft release in 1 year is maybe like the same amount Adobe/Macromedia/Allaire have released in 15 years.
Do't take this the wrong way, but the debugger is buggy as hell. It works when it wants to and even to the point when you do get it working it actually gets slower and slower each time you run it. This has been a problem for now 6 years in this product and it has never gotten any attention, now that CF builder utilises this feature, I would have hoped that these bugs and problems got fixed. But they never did.
Every major release is about throwing new features into the product, but when it comes to issues like this do any of the previous versions that have these problems get fixed? No they don't, and even the current major release is not fixing any of these previous issues either.
The problem is one needs to draw the line, and stop putting features into a product that Adobe can't continue to support.
And till that changes people are going to continue to get rather annoyed with Adobe, and the more they get annoyed the more customers Adobe end up loosing. I don;t make my comments very lightly when I do make them, and after 15 years I have seen it all with ColdFusion and the one thing that never changes is the lack of bugs in older features that ever get fixed.
Sorry for the rant, but this is something that Adobe HAVE to address and address sooner than later. I know of 3 more companies that are moving away from ColdFusion, for more reasons than what I have outlined here.

ColdFusion Builder 2 RDS Debugging error.

I am running a Windows 7 Professional 64-bit system with ColdFusion 9.01 (Developer Edition). I just downloaded the trial version of ColdFusion Builder and cannot get the debugger to work. I have followed all the instructions concerning making sure RDS is enabled in ColdFusion (which it was for my old CFEclipse version and some Flex apps). I've done everything I can think of for configuring CF Builder, but I cannot get the debugger to work. When I go to RDS configuration in CF Builder and click "Test Connection," A popup states that "Test connection was successful." Since I'm using IIS and not the CF built-in web server, I configured the Server Information using port 80. However, when I click "Test Debugger," I get an error: "Test debugger failed. The debugger server is currently listening on port 51,367..." So, I change the port to 51367. The connection tests successfully again, but when I test the debugger, I get another error: "Test debugger failed. An RDS connection was established but the ColdFusion RDS line debugger could not be contacted. The server gave the following message: -1: Could not initialize class coldfusion.logs.CFlogs." I cannot find any reference to that error message using Google, or searching Adobe. When I click on the "bug" drop-down and then click the name of "Debug server," I get a similar, but different and longer error:
Unable to connect to the RDS server 'ColdFusion'.
Ensure that the server is currently running and that line debugging and RDS are enabled. You may also need to check your RDS connection settings in Eclipse to ensure that they are correct.
Error message:
-1:Error connecting to JVM for debugging at localhost:5005. Could not attach the VM at port 5005. You must specify this debugger port in the JVM settings of you application server, for example: -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005. You will also need to make sure that another debugger is not currently connected to the CF JVM at the same port (5005).
Root cause ->
Connection refused: connect
I check in the jvm.config file and those settings are already there. So, does anyone have a clue about any of this? I've run all possible CF and JRE updates, I've not only stopped and restarted the ColdFusion service several times, but I've even rebooted my system. This should be a simple process.

CF Line Debugger is enabled. every thing is configured perfectly. This is a error which I've never seen before.
Actually, I am a IT Manager in a Software company and we need to setup a remote CF9 Server for development and testing with debugging. This is a centralize server for my team to work and test. Currently we are working using dreamviewer and every thing is going fine with this tool but as you know there is no good debugger tool in DW so we have decided to work in CFBuilder 2. Below you will find the jvm config in my CF Server.
========================================================================================== =======================
-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005 -server -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Xbatch -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Duser.language=en -Duser.country=US -Dfile.encoding=UTF-8 -DDEBUGGER_SERVER_PORT=5005 -DDEBUGGER_TRACE=true
========================================================================================== =======================

The internal html viewer is not working in coldfusion builder 2.

It is so frustrating how hard this is. I finished setting up coldfusion and coldfusion builder 2 with an apache local webserver and was hoping to make use of the internal html viewer but it won't come on! All I see is a blank grey page with no content. After creeping around the forums for a while it seemed that the simplest solution was to use the internal coldfusion server so I uninstalled everything and did just that, reverting my administrator page to http://localhost:8500/CFIDE/administrator/index.cfm (working and launchable from the IDE), placing my webroot at C:\ColdFusion9\wwwroot and with all the folders in their right place. The server is running ok and when I launch the run as "coldfusion administrator" option to run my index file, it succesfully opens the external browser and displays the page.
I have the same setup on my desktop at home, the same files, installation, everything! and it works but not on my laptop. I followed Ben Forta's instructions to a T and yet I still am not getting the html preview. I even tried to hard code the absolute url in the html preview settings and still nothing but that annoying grey.
Is this a bug? There doesn't seem to be anything about it in the bug reports. It is quite infuriating how something that seems so miniscule could be such an annoyance. I have already gotten quite used to the preview pages and coldfusion and I would prefer to code that way rather than making use of dreamweaver which I feel I am being forced to use, but at least it's consistent.
Please if anyone could provide some answers and help I would really appreciate it! I have only so much hair left!
Thanks!

Perhaps others may recognize and resolve this for you. I and others here often can and do offer quick solutions to many problems. And I can appreciate that it’s reasonable to think that something so simple should just work. But in this case I think are simply too many variables that could explain why things are not working for you. And while I can also appreciate that you will prefer to get a solution for free if anyone can offer it, I just can’t even begin to offer all the possible problems and solutions, at least by email, in this case. Again, maybe someone else will make a quick connection.
But I will point out that if you’re willing to pay US$75, I offer a service of remotely troubleshooting any one CFBuilder problem for that fixed price. Hopefully I might help you solve it quickly (when I can see exactly what’s going on in your environment), but you will not pay if I don’t solve the problem in up to 2 hours effort. If you may be interested, see www.carehart.org/consulting/ for more, and if you want to set up a time to get together (over the web), drop me an email at [email protected]
Finally, please note that I don’t often point out this service here on the forums. I generally just offer suggestions (sometimes lengthy ones) without any commercial expectation, so please don’t regard this as me engaging in “abusive unsolicited commercial email”. I’m just offering a possible solution, given the OPs sincere challenge in solving things.
/charlie

How do I add/update/delete data using ColdFusion Builder 3?

I feel like this is a really simple and stupid question and should be easy to figure out, but I can't.
I am relearning ColdFusion after 12 years out of the IT field. I am using the ColdFusion 9 Getting Started:Volume 1 book. In Chapter 7 it states that I need to edit the Application.cfc file so that I can edit the database rather than just selecting from the database. I can't seem to find anything related to that file in any search. In my ColdFusion 11 Administrator I have set this mySQL database to be able to be edited, but ColdFusion Builder 3 doesn't seem to allow any editing of the tables. I have not had much luck searching for help regarding this on the internet either. My biggest problem so far is getting ColdFusion Builder to talk with my mySQL database properly so I can actually get on with relearning ColdFusion and writing code. Frustrating!!

I do have ColdFusion 11 Administrator installed. When I go to Data and Services there and open the datasource (OWS) that I want to connect to and query off of, and go to Advanced Settings, I show that the following are selected:
SELECT
CREATE
GRANT
INSERT
DROP
REVOKE
UPDATE
ALTER
Stored Procedures
DELETE
If, in ColdFusion Builder 3, I open the RDS Query viewer and write the following basic update query (Server: default:local; Datasource: OWS):
insert into directors(FirstName, LastName)
Values ('Benjamin', 'Forta');
I get the following RDS error message:
java.sql.SQLException: Can not issue data manipulation statements with executeQuery().
According to the book and some information I have seen online, the SQL Query Tool, for security's sake, by default allows execution of SELECT statements, but no other SQL statements. According to the book, to change this behavior I need to edit the Application.cfc file in the ows/sql directory. I have to change the THIS.select_only flag from the default of yes to no and save the file. I cannot find this file anywhere. I have seen an application.cfm, but I think this is different that what they want because I can't find anything in that file that says THIS.select.

Settings reset when Comp resta

Since downloading 2.8.0004, whenever I restart my computer ALL my sound settings reset to stock settings. (Volume settings, Mic settings, etc). So everytime I restart my computer I need to go through all my settings and put them back where I want them.... EVERYTIME. I tried to figure it out on my own, but I'm at my wits end.
Any help you guys could give me would be very much appreciated.
System Specs
SoundBlaster X-Fi ExtremeGamer
Asus P5N-D
Intel Core2 Quad CPU Q9300
Nvidia EVGA 8800gtx
Vista Home Premium x64
4gb Mushkin Extreme RAM
Anything else you need, please let me know.

Hello Nafets727,
You might want to check this thread.

Xcode 4.2 crash after a few minutes working on Build Settings

Working with the Build Settings screen the editor area turns gray in a 75% (only one square visible) and the only solution is to restart the mac mini. It seems like running out of video memory.
Using XCode 4.2
Mac OS x 10.7
Lion
Thanks

How to reproduce the problem:
In Build Settings switch between Project and Targets several times.
Some times resizing the screen the problem is solved. Other the Mac hangs.
May be it's a refresh problem... Is there any patch?

New Platform Support for ColdFusion 10 and ColdFusion Builder 2.0.1: Windows 8 and Windows 2012 Serv

Microsoft Windows 8 and Microsoft Windows 2012 server are now supported platforms for ColdFusion 10. The new Windows installers are available for download to all retail and licensing customers as well on the trials download page.
The ColdFusion Builder 2.0.1 installers have also been updated to support Windows 8. The existing MAC OS X installer for ColdFusion Builder 2.0.1 has also been certified to now support MAC OS X 10.8.
Refer this technote for more details about the support.

@Adam @CarlV
>what's the version number when you dump the server scope?
ColdFusion Server - Evaluation 10,0,8,284032
OK I see, the I button reports differently to Settings Summary.
About ColdFusion »
System Information
Server Details
Server Product ColdFusion
Version 10,0,8,284032
Tomcat Version 7.0.23.0
Edition Enterprise (Trial)
Serial Number
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Server Settings > Settings Summary
System Information
Server Details
Server Product ColdFusion
Version ColdFusion 10,284032
Edition Enterprise (Trial)
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Adobe Driver Version 4.1 (Build 0001)
Regards Carl M.

How do I remove this stupid *&^$ Tasktop program from my ColdFusion Builder 2?

I do not need it, I do not want it, and somehow I accidentally installed it. I can find no uninstall button, it's not in my Vista Programs and Features to uninstall, and I"m tired of waiting for it during application load and getting in the way of my shortcuts and whatnot. I just want it gone but I can find no reference anywhere to take this stupid program out.

RLS,
Are you running the latest version of CF Builder by any chance (2.0.1)? If not, you might want to download and install it. It actually uninstalls the previous version of CF Builder (2.0.0) and installs the new version (becuase 2.0.1 uses a newer major build of Eclipse). This will allow you to start with a "clean slate" when it comes to which add-ons are installed, but it should maintain all of your project settings.
Another idea, although this one could be pretty dangerous. If you feel comfortable trying this, close CF Builder and:
Make a copy of your \Program Files\Adobe\Adobe\ColdFusion Builder 2\features and \Program Files\Adobe\Adobe\ColdFusion Builder 2\plugins folders as a backup.
Make copies of \Program Files\Adobe\Adobe ColdFusion Builder 2\configuration\org.eclipse.equinox.simpleconfigurator\bundles.info and \Program Files (x86)\Adobe\Adobe ColdFusion Builder 2\configuration\org.eclipse.update\platform.xml as backups.
Browse each of those folders from step 1 and find any folders and files with "Tasktop" in the name. Delete just those files and folders.
Open \Program Files\Adobe\Adobe ColdFusion Builder 2\configuration\org.eclipse.equinox.simpleconfigurator\bundles.info in a text editor and remove lines that have references to Tasktop.
Open \Program Files (x86)\Adobe\Adobe ColdFusion Builder 2\configuration\org.eclipse.update\platform.xml in a text editor and remove lines that have references to Tasktop.
Launch CF Builder.
If CF Builder wont' run after that, revert the folders and files to the copies you made in steps 1 and 2 above.
Good luck,
-Carl V.

HT5569 4S phone to IOS 7.1.2 and lost my wi-fi. The wi-fi is on, but can't find ANY networks. I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 an

I updated my 4S phone to IOS 7.1.2 and lost my wi-fi. The wi-fi is on, but can't find ANY networks. I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help. They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition. They have no idea why it isn't working, but they could offer to sell me another phone. This is extremely annoying! They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!

My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again...

ColdFusion Builder 3 Settings Reset on Restart

Similar Messages

Maybe you are looking for