Coldfusion odbc errors

trying to connect to ibm u2 database. any ideas? coldfusion 7
with iis on xp sp2
Connection verification failed for data source: u2
java.sql.SQLException: [Macromedia][SequeLink JDBC
Driver][ODBC Socket][IBM][UVODBC][2701920]Error ID: 46 Severity:
ERROR Facility: DBCAPERR - UCI Error. Func: SQLConnect(); State:
IM980; uniVerse code: 0; Msg: [IBM][SQL Client]Remote password is
required..
The root cause was that: java.sql.SQLException:
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][IBM][UVODBC][2701920]Error ID: 46 Severity: ERROR Facility:
DBCAPERR - UCI Error. Func: SQLConnect(); State: IM980; uniVerse
code: 0; Msg: [IBM][SQL Client]Remote password is required..

Yeah, IBM must have a JDBC driver for the U2 DBMS. Use it and
not ODBC. Put the jar(s) for the driver in CFMX's classpath and
restart. Create a DSN of type other. Get the JDBC URL and driver
classname from the IBM docs.
JDBC type IV drivers connect from CFMX (java app server) from
java to the jdbc driver over the wire to your IBM database. Very
direct. ODBC connection means java to JDBC to the ODBC client to
the ODBC server to windows ODBC to IBM's native client over the
wire to the IBM U2 database. Not a very direct path. Typically ODBC
connections like this are not very good performers or very
stable.

Similar Messages

ODBC Error, think it's bc of Application.cfm

Ok I'm working on a small e-commerce project and it's been
about a year and a half since I've done programming with CF, so I'm
doing a lot of re-learning, basically everything and only remember
a very small bit, so basically I'm noob again.
OK I built my project, I'm using MySQL as my database
container. Everything runs perfectly fine on my local machine
server but when I go to upload it to my hosting provider. I get the
following error when I try to access the database on the hosting
provider.
Error Diagnostic Information
ODBC Error Code = S1000 (General error)
[MySQL][ODBC 3.51 Driver]Access denied for user 'ODBC'@'my IP
address' (using password: NO)
The error occurred while processing an element with a general
identifier of (CFQUERY), occupying document position (1:1) to
(1:54).
OK, my guess right now is that it has something to do with
the user and password authentication, and if that's the case, but
to be honest I have no idea whats going on, cause this problem
doesnt occur when I use PostgreSQL. I hope someone on here has been
through this and knows what's up.
Here's the code in my Application.cfm file
<cfapplication name="joecool-ecom" sessionmanagement="yes"
/>
<cfset Request.DSN = "joecool-ecom" />
<cfset REQUEST.BasePath =
GetDirectoryFromPath(GetCurrentTemplatePath())>
I'm completely lost and have been trying to figure this out
for a solid 7+ hours. I'm hoping that it's just something really
really lame and stupid that I'm doing wrong on my side and that it
can be fixed very easily, but part of me questions if my hosting
provider just plain sucks and that I may end up having to switch
providers or something.

well i found a solution and yes it was a b***...
It turns out it had something to do with ODBC on my hosting
provider and MySQL. I ran a test on PostgreSQL and it worked fine,
so I just redid my entire database into PostgreSQL and then changed
all my boolean crap in my code from 1 to TRUE and 0 to FALSE. It
sucked, but at least it works now.
If anyone has any experience with using ODBC with ColdFusion
for MySQL, if you have any ideas of why this error would occur,
please let me know. It has to do with it trying to login
anonymously and not using a PW, but I have no idea how to fix that
on a hosting provider. Talked to them and its just a bunch of
foreigners that don't know anything about computers so....
whatever.
Also if anyone knows any good hosting providers that keep
their ColdFusion current, please let me know. I'm getting away from
mine once my subscription runs out in a few more months. They're
still using ColdFusion 5, which sucks

Powerpivot Report 2010 - OLE DB or ODBC error: Query timeout expired; HYT00

0
I have report already developed by someone in powerpivot 2010 and deployed to sharepoint in powerpivot gallery library. The data source for this report is SQL Server 2008 r2. I have set the refresh options in sharepoint to run after business hours during
week end. When I check the refresh history it shows this error message "OLE DB or ODBC error: Query timeout expired; HYT00. An error occurred while processing the 'xxx' table. The current operation was cancelled because another operation in the
transaction failed..
I have tried to run the "Also refresh as soon as possible " just to check but same error message is shown.
This is the detailed error message details:
03/02/2014 21:06:55 03/02/2014 22:08:15 01:01:20 Failed
OLE DB or ODBC error: Query timeout expired; HYT00. An error occurred while processing the 'xxx' table. The current operation was cancelled because another operation in the transaction failed
Could anyone guide me on this issue? Truly appreciate your help in advance.

Hi asritha,
I would suggest you take a look at the following articles regarding how to configure PowerPivot data refresh in SharePoint Server:
Configure and Use Stored Credentials for PowerPivot Data Refresh:
http://technet.microsoft.com/en-us/library/ee210671(v=sql.105).aspx
Configure and Use the PowerPivot Unattended Data Refresh Account:
http://technet.microsoft.com/en-us/library/ff773327(v=sql.105).aspx
Note: Please ensure that the account have sufficient permission access to your data source.
In addition, please elaborate your PowerPivot data soure with more detail. If you are using SSAS cube, please try to increase "ExternalConnectionTimeout" property default value to see if this helps. Here is the similar thread for your reference,
please see:
http://social.technet.microsoft.com/Forums/en-US/35b26c06-9e6d-41e5-ae44-bfb1233510ac/ssas2008-ole-db-error-ole-db-or-odbc-error-query-timeout-expired-hyt00?forum=sqldatamining
Regards,
Elvis Long
TechNet Community Support

ODBC Error connecting to a stored procedure SQL Server 2008 - Crystal 8.5

I am running a local copy of SQL server 2008 and get an ODBC error when connecting to any stored procedure with or without parameter. The database are running in SQL Server 2000 compatibility mode on the local server.
Do not get the error when connecting to one or more databse tables or when connecting to a stored procedure on a remote database.
The error reported is "ODBC error:[Microsoft][ODBC SQL Server driver] Syntax error or access violation"
I am running Vista OS.
Any help would be appreciated..

Hello,
Interesting combination. All but CR 8.5 is supported on that OS.
When you created your DSN did you using the 2008 Client or MDAC?
I suggest you go back to supported platforms for CR 8.5
If not then start debugging Vista permissions to start with...
good luck
Don

Customizing ODBC errors in OBIEE 11g

Hi,
I have a requirement where the user is expecting to see some Custom error messages instead of the Default ODBC errors OBIEE throws. Like the one below.
Error generating view. Error getting cursor in GenerateHead
Error Details
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22055] First argument of Parent function must be a hierarchy in a Parent-Child dimension with a single column Member Key. (HY000)
Where i can find the files which has these messages.They should be on some .xml or Java file on the server. If i know that location, i can change the error into Custom error messages.
Any help would be really appreciated.
Thanks
Swami

Swami,
These kind of custom error messages,You need to do it manually for each report
Edit Analysis Properties ---- Results Display ----- Display Custom Message
Mark if you helps,
Thanks,

ODBC Error while Siebel Server try to connect to Oracle 10G

We have managed to get through with the configuration of siebel server on HP Unix. However before we get to the Database configuration, we are encountering errors with ODBC connection to oracle 10g database. We are able to connect to oracle using sql plus but odbc connection is failing. We verified for patches, missing files, directory access rights - but no clue as of now.
Our error says:
Logging into "ENTSIA_DEV_DAN" as "sadmin"....
/user/lib/hpux32/dld.so: Unable to find library 'libclntsh.so'.
ODBC error IM0003 in SQLConnect:
(DataDirect){ODBC lib} specified driver could not be loaded
Unable to login using specified odbc parameters
This has become a show stopped for us and we are strugging with this for the past three days without much direction.
Any help is greatly appreciated.
Thanks.

Hi,
I guess your DataDirect Driver which gets registered during Database Configuration has some problems.
Can you check whether the DSN is using the proper Driver?
Also, the username through which you are logging in to start Siebel Services must have proper rights.
Many times on Windows platform i have noticied this error in ODBC due to improper user rights. If the rights are not proper, the DataDirect Driver fails to get loaded & throws similar error.
Regards,
Shalabhsneha

"ODBC Error= [17] [] "[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQ

Hi,
I am getting the above error when trying to connect to a database located on remote database. if the database is on same system no problem.
any clue???????pls help me.

The full error msg is as follows and the back ground of the problem is decribed below...pls help me out.
I have written some perl programs to be called by java to execute some database related tasks. My database located at a remote win2K server and database is MSSql and my programs are executing on WIN2k server. The problem is with perl talking to remote database...the following error is displaying...
"ODBC Error= [17] [] "[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied."

ODBC error checking in a data model

At my client we're using PD 16.5.0 build 3982, and we're trying to check in a LDM that was originally generated from a PDM. When we try and check the LDM in to the repository, we get an ODBC error:
ODBC driver for Oracle
ORA-12899: value too large for column "PMTEXT"."TDAT" (actual: 2002, maximum: 2000)
SQLSTATE = NA000
I have an old (PD 16.1) PDM for the repository, which shows the column as having a length of 30,000, not 2,000. On my own laptop, the 16.5.3 (Sybase SQL Anywhere) repository also shows the column as varchar(30,000). However, the client's 16.5.0 Oracle database shows the column as varchar2(2000).
Has anyone else had this problem with an Oracle repository?

Check your settings for MaxBytePerChar in your ODBC connection details. If you have a multi byte database this helps to correctly store chars that are represented by more than 1 byte, e.g. the EUR sign in a comment field.

ODBC error in BI Launch pad

hi,
am very new to SAP BI/BW/BO
i am getting error while running the query in BI launch pad, which i imported from the UDT
in UDT the values are being displayed and all the parameters were clearly defined
the query is being running perfectly in RICH CLIENT but the same query unv file is not been running in BI launchpad
where would be the actual problem ????
NOTE:
its showing ODBC error and no default drivers specified.
but as i mentioned above , its displaying the values in UDT and Rich client ( Enterprise ) mode but not in BI Launchpad.
please help me out..?
specifications:
SAP business intelligence 4.1
32 bit windows home premium

Santosh,
Create the same ODBC connection in server also, so that you will be able to view in BI Launchpad also.

OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi,
I have one client and one server. In both hosts I created an OS-user named User1.
The user have been given various role under the prefix SQLServer2005.
The default instance of SQL Server and instance (background-process) of
Analysis Service are also run under User1.
I connected via Management Studio to Analysis Service directly in the
server. I set the permission to access Analysis Service to Everyone.
This means everyone should be able to use Analysis Service. I have set
ODBC data source to the server. Testing was successful.
I created a project to create a cube. The tables are fairly small (total 300 MB, biggest one 290).
On project setting (created at client) I set the server host as
deployment target. I managed to deploy project when all I have are Data
Source and Data Source Views.
But on deployment I always failed. The errors remain the same, begins with
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
I have tried 4 combinations of Impersonation :
(A) Use a specific username and password
* in which I supply User1 and the password of User1
(B) Use the service account
(C) Use the credentials of the current user
(D) Default
Why is this? The server does certainly exist. I think the error message is wrong.
I have seen 3 posting that seems related. One of them say the solution is giving the right impersonation, but gave no detail. About the privilege, User1 are granted the role of
SQLServer2005MSOLAP. What is the solution?
Thank you,
Bernaridho

I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

ODBC error occurred while executing SQLExtendedFetch to retrieve the result

Good morning everyone,
I had the following error message while trying to run a simple query in Answers with 3 dimensional columns, 1 fact, and 4 calculated facts...
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1001 code: 0 message: [Oracle][ODBC]Memory allocation error.. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
It's taking around 2,5 minutes to run, then it give that error message.
Has anyone got any ideas on where I should get started?
Update: after 2nd time - it's running fine....I've added a filter...could this be the issue? Too many rows initially?

Damon,
you were correct - it was indeed an ODBC issue. Switching to OCI has fixed the issue. This link was also very helpful:
regarding performance
In my case, the problem with OCI happened because I was using System DSN name instead of how it's called in tnsnames.

ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near

Hi,
I am currently receiving the following error in BI Answers when I run a query against a Microsoft SQL 2005 Server.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: 60 code: 8180 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Statement(s) could not be prepared.. [nQSError: 16001] ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
SQL Issued: SELECT 0 s_0, "SD&A_Dashboard_Test"."BORIS_ALIAS_ETMS_Users"."Id" s_1, "SD&A_Dashboard_Test"."BORIS_ALIAS_ETMS_Users"."UserName" s_2 FROM "SD&A_Dashboard_Test" WHERE ("BORIS_ALIAS_ETMS_Users"."UserName" = 'trowe') FETCH FIRST 65001 ROWS ONLY
I am able to connect successfully to the Data Source and run a query against the database using the NQCMD command line tool so believe I have configured the DataDirect 7.0.1 drivers correctly, also I am able to view the Table Data in the RPD Physical Layer in the BI Administration Tool. So don't understand why I am getting this error.
I have also activated the nquery.log but that doesn't really give me any further information.
[2015-04-28T16:37:22.000+00:00] [OracleBIServerComponent] [TRACE:4] [USER-34] [] [ecid: 4a9e440f990ba0a4:-1995d2c5:14d00d3ef04:-8000-00000000000001c6,0:1:1:5] [tid: 5f] [requestid: 6f11000b] [sessionid: 6f110000] [username: borisdev] -------------------- Query Status: [nQSError: 16002] Cannot obtain number of columns for the query result. [[
[nQSError: 16001] ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'..
[nQSError: 16001] ODBC error state: 60 code: 8180 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Statement(s) could not be prepared..
[nQSError: 43119] Query Failed:
I was wondering if anyone could shed any light on what could possibly be causing the [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'.. error ? And also provide any suggestions on how I can troubleshoot this issue further as I am now completely out of ideas of what to do next having tried numerous things i.e. setting IDENTIFIER_QUOTE_CHAR = '' in DBFeatures.INI which I found in similar posts on the subject all to no avail
Regards,
Tom Rowe

Hi Rajagopal,
Thanks for your reply after doing some further investigations this morning I found and corrected the problem...
The DataDirect Driver does not like double quotes in the query for some reason, testing using the BI Answers generated SQL with the nqcmd tool below...
With double quotes “” it fails immediately
Give SQL Statement: select T18706."Id" as c1, T18706."UserName" as c2 from "ETMS_Users" T18706 where ( T18706."UserName" = 'trowe' )
select T18706."Id" as c1, T18706."UserName" as c2 from "ETMS_Users" T18706 where ( T18706."UserName" = 'trowe' )
[102][State: S1000] [DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Incorrect syntax near 'Id'.
Statement execute failed
With double quotes removed for just the columns I now get the Error near ‘ETMS_Users’ which still had the double quotes
Give SQL Statement: select T18706.Id as c1, T18706.UserName as c2 from "ETMS_Users" T18706 where ( T18706.UserName = 'trowe' )
select T18706.Id as c1, T18706.UserName as c2 from "ETMS_Users" T18706 where ( T18706.UserName = 'trowe' )
[102][State: S1000] [DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Incorrect syntax near 'ETMS_Users'.
Statement execute failed
With all double quotes removed it works !
Give SQL Statement: select T18706.Id as c1, T18706.UserName as c2 from ETMS_Users T18706 where ( T18706.UserName = 'trowe' )
select T18706.Id as c1, T18706.UserName as c2 from ETMS_Users T18706 where ( T18706.UserName = 'trowe' )
c1 c2
42499 trowe
Row count: 1
Give SQL Statement:
The solution to fix the problem is...
In the BI Admin Tool Physical Layer Database, Properties Features tab is to delete the double quote in the Value column for IDENTIFIER_QUOTE_CHAR, setting this in the DBFeatures.INI file does not resolve the problem possibly it did in earlier versions of the product.
Regards,
Tom Rowe

SQL Server Agent - [165] ODBC Error: 0, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]

Hi,
I keep receiving the error below in the SQL Server Agent Error Log;
[165] ODBC Error: 0, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]
It is occurring approximately 20 times an hour and i cannot link it to any job failures. All jobs on the same SQL instance are working.
The server is a clustered server and there are no errors occuring in the SQL Server error log at the same time. I have attempted to trace using profiler looking for errors and warnings but anything that does occur doesn't seem to correspond to the reported
times of the errors within the sql agent error log.
Please could someone point me where to look next?
Many thanks.

Please may I add that this is on a SQL Server 2008 R2 Enterprise edition patched to 10.50.1600.
Nah, that server is not patched at all, because 10.50.1600 is the RTM version. Find Service Pack 2 and install at the next maintenance window, after having performed tests according to your local policy.
It is not going to resolve your particular problem though.
It seems like you have a job that attempts to a connect to s server that is down or non-existing. The job may be configured to return success also on failures. I would check if there are jobs that target other servers.
Erland Sommarskog, SQL Server MVP, [email protected]

OLE DB error: OLE DB or ODBC error: %1 is not a valid Win32 application

Hi,
I am creating the Cubes with couple of dimensions. My backend is Oracle. I can able to deploy the cube in my local machine which is running 32 Bit Windoes 7 OS. But when I try to deploy the cube in another server which is running Windows 2003 R2 64 bit OS,
returns "OLE DB error: OLE DB or ODBC error: %1 is not a valid Win32 application" this error. The driver whic I am using to connect the Oracel DB is "Native OLE DB\Oracle Provider for OLE DB". I have also installed the Oracle 10g 32 bit client in my machine.
Any solution for this issue?
Thanks,
Jeen

Hi Jeen,
What's the specific version of your SQL Server? Please try to install the latest Service Pack on 64bit box to see if this help.
How to obtain the latest service pack for SQL Server 2005:
http://support.microsoft.com/kb/913089
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

ODBC errors while retrieving timestamp column

Hi,
I created 2 views selecting timestamp column of table ULTBPM_CCHK.CC_APPINFO:
CREATE OR REPLACE FORCE VIEW "ULTBPM_CCHK"."ERKANDENE_V" ("CCAI_RECORDDATETIME") AS select TO_DATE(TO_CHAR(CCAI_RECORDDATETIME,'DD/MM/YYYY hh24:mi:ss'),'DD/MM/YYY
Y hh24:mi:ss') CCAI_RECORDDATETIME from ULTBPM_CCHK.CC_APPINFO;
CREATE OR REPLACE VIEW "ULTBPM_CCHK"."ERKANDENE_V2"
"CCAI_RECORDDATETIME") AS select CCAI_RECORDDATETIME from ULTBPM_CCHK.CC_APPINFO;
While i can query "ULTBPM_CCHK"."ERKANDENE_V" without any problem, following errror occurs for "ULTBPM_CCHK"."ERKANDENE_V2":
SELECT AL1.CCAI_RECORDDATETIME FROM ULTBPM_CCHK.ERKANDENE_V2 AL1
ODBC Error: SQL API: [SQLBindCol], SQL RETURN: [-1], SQL STATE: [HY003], SQL NATIVE ERROR: [0], SQL MESSAGE: [[Microsoft][ODBC Driver Manager] Program type out of range]
I want to select timestamp colum, Any sugestions?
Hyperion Reporting Studio 9.3.1
Oracle 9i clent
Oracle 10g (10.2.0.4) database
Regards,
Erkan Saka

Hi,
This time it gives "ORA-03106: fatal two-task communication protocol error". I searched metalink and fould that this may be caused by incompatible SqlNet libraries or NLS settings between cklient and server. I checked NLS settings but did not solved the problem. In dbgprint file i saw that hyperion identified timestamp column (B) as ColType 0. Is it normal for timestamp column? Because when i look at the column properties in Reporting Studio, i see nothing in Item Type.
SELECT DISTINCT COLUMN_NAME, '*', COLUMN_ID, DATA_TYPE, DATA_LENGTH,
     DATA_SCALE, DATA_PRECISION, NULLABLE, '*' FROM SYS.ALL_TAB_COLUMNS
     WHERE TABLE_NAME = 'ERKAN_DENE' AND OWNER = 'DISBANK' ORDER BY
     COLUMN_ID
Server Column Information
ColName ColNum ColType Length Places Digits Nulls
======= ====== ======== ====== ====== ====== =====
A 1 NUMBER 22 0 10 0
B 2 TIMESTAMP(6) 11 6 10 1
End Select
DaMgr DMTable Column Information
ColName ColNum ColType Length Places
======= ====== ====== ====== ======
A 0 4 22 0
B 1 0 11 6
Begin Executing Document OnPreProcess Script.
End Executing Document OnPreProcess Script.
Begin Select
(0 0 )
Sending SQL to the Server:
SELECT AL1.B FROM DISBANK.ERKAN_DENE AL1
Oracle error -1 3106: ORA-03106: fatal two-task communication protocol error
Exception thrown in v1_bi_code\bl\da\dasnet_l.cpp, line 959: Oracle Error -1: ORA-03106: fatal two-task communication protocol error
DaSession::CancelOk()
Regards,
Erkan

Coldfusion odbc errors

Similar Messages

Maybe you are looking for