ColdFusion Server Settings box is blank

I finally got my copy of CFBuilder 2, and I've been trying to get it set up for my projects. When editing code, I have a "Firefox" and "IE" tab at the bottom of the editor window, but when I click on either one (or if I click on the green "Run" button in the toolbar), I get the following message:
Server is not configured with the project.
Along with instructions about how to configure the server settings. However, when I do (project->properties->ColdFusion Server Settings), that box is completely blank, other than the "Restore Defaults" and "Apply" buttons.
What gives?

Ok, somehow I managed to figure it out. I ended up with a double "http://" in the server path, so I nuked it and started over.
Now my problem is a 404 when I preview in my browser.
I have CF8 installed locally, running on localhost:8500. I have C:/ColdFusion8/wwwroot/ as my local path, and folders for each project under that (example: planning).
I'm assuming since my project path is C:/ColdFusion8/wwwroot/planning/ and my "Sample URL" is http://localhost:8500/planning/ that previewing the index.cfm file in that folder should give me the proper URL. But I get a "File not found" error.
I can browse to the file in Firefox and view it fine, so I suspect a pathing problem.

Similar Messages

ColdFusion Builder 3 RDS and Remove Server settings reset on each restart

I have CF Builder 3 Trial installed as standalone application. Every time I restart CF Builder, the RDS mapping settings for the remote server I have are gone and also the remote ColdFusion server I set up is gone and I need to recreate it. Is there anything I can do to prevent that from happening? Thank you for any help on this issue, so far I spent few hours searching for a fix but can't find anything.

I just verified the same problem on Dan's thread as well!
The difference between Bawcior and myself is that I lose the server from server view however I don't lose the RDS entry... I just upgraded to version 3.0.3.290701 and the error persists.
I'm running Windows 8.1 Pro (64 bit)

My outgoing mail server auto defaults to port 465 but auto detect settings box is not checked

Hi Guys,
Hope someone can help.
I am having problems sending emails as my provider does not support port 465 as an outgoing mail server port, only 587 and 25. Despite not having 'auto detect settings' box checked in mac mail my port defaults to 465 whatever I put in there.
I am running 10.10.1 and the latest version of mac mail.
Hope someone can help.
Cheers
Adrian

Hello,
I figured out my problem. I had somehow changed the "user name" in the outgoing server. (edit server list > Advanced tab > user name). When I corrected the user name, so that it exactly matches the user name for the "Incoming mail server" the outgoing server is back online!
Of course, I still have the problem of having to enter my keyword password repeatedly, but that is in a different thread . . .
Lincoln

CFBuilder 3 loses second server settings on cfbuilder exit/restart

I have two servers which I have connected to the cfbuilder. First one is localhost, which works okay, even debugger.
Second is vmware XP image, which i can connect to the builder via new add server setup window.
settings:
Name:Vmware XP
type: Other
hostname:192.168.21.2
port: 80
All other settings are blank.
At the mappings I have mapped my localpath to the server remotepath:
Local path:C:\Projects\Coldfusion\Project
Remote path: \\vmware-host\Shared Folders\Project.
After I do that, the server comes to the server list, shows running. CFBuilder can connect to rds server. But I cannot start debug yet, so I go to preferences and add the wmvare xp server to the project, and see that the rds configuration is ok (no password is needed, so I clear the login imfo and the prompt for password checkbox)
After that debug works, and all is well.
Then after I shutdown cfbuilder, and restart it, ONLY the localhost server is found! the vmware xp is nowhere, it has just vanished from the server list. And of course debugger won't work because the project has no server attached (even though project properties show that the vmware xp is selected, it seems only cfbuilder has not saved the server configuration). And I have to do this again to make debug work. this is VERY frustrating! Is there some hidden option which does not save the server setting or something? is there a way to export server settings from the builder?
If anyone couldhepl, that would be amazing!

This issue was fixed in the new ColdFusion Builder 3 installer (released in December with the updated ColdFusion 11 installers, but not advertised to anyone). You'll have to download the new installer, uninstall CFBuilder, and then reinstall using the new installer.
Why they couldn't roll it out as an update through the Eclipse updater (like they have previous CFBuilder 3 updates) is beyond me.
-Carl V.

Z10 won't send any emails; shows red clock. Server settings match those of my PC.

All of a sudden, my Z10 has started refusing to send emails. It goes through the motions, showing a 'transmit' icon for a second, and then just shows the Red Clock [of Doom]. I've checked my server settings many times, but they're the same as those on my PC, and in any case nothing changed in that respect between the time when all was well and now.
The emails have no attachments. They are short messages which shouldn't (and haven't been known to) cause any problems to the carrier. I have done numerous battery pulls and power-offs; I have (since the problem started) updated to 10.2.0.424; none of these actions has helped.
The email providers seem to think there's nothing wrong at their end, so I need to establish before I get back to them that it definitely isn't a BB10 problem. I would deeply welcome any advice.

It is not recomended for OS 10 to remove the battery to correct issues.
Try a reset: when powered on hold down the power button for 10 seconds.
You can also remove your email account, power off, power on then reinstall it.
You can reset your phone to factory settings if you wish to see if it corrects your issue. Resetting to factory settings will wipe out all your data so you should save it first. To save all your stuff download and install BlackBerry Link on your computer from the link below. Resetting will not back-up the OS on your phone. Once you have downloaded and installed BlackBerry Link connect your phone to your computer and save your stuff. Once saved disconnect your phone from the computer.
To reset your phone: tap the Settings App, scroll down and tap Security and Privacy, tap Security Wipe, tap the blank box and enter blackberry.
Once Wiped reconnect your phone to your computer and install your stuff.
http://us.blackberry.com/software/desktop/blackberry-link.html

I am running 4.0.1 and when I download something the Download box stays blank-even though I have selected in General Preferences 'Show the downloads window when downloading a file' AND selected 'Save files to Downloads'....???

I am running 4.0.1 and when I download something the Download box stays blank-even though I have selected in General Preferences 'Show the downloads window when downloading a file' AND selected 'Save files to Downloads'....???

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Acrobat form with server side submit, posting blank data

Read more
Acrobat form with server side submit, posting blank data,
thanh xả tràn
I have a PDF form which gets submitted to the server using a submit (server-side) button. The data is then received in XML format by a ColdFusion component which does some validation and stores it into the database.
This PDF form is usually filled in by our clients using Adobe Reader 8 or below. While most of the times(and I mean like 96-97% of the times) everything goes well, at times we receive blank data into our database!! This renders couple of other features in our application useless as they try to parse an XML which does not exist.
I do believe that this is not a problem at the ColdFusion side because all it does is trim(ToString(toBinary(GetHttpRequestData().content))).
Does anyone has a clue as to why the data will be lost upon form submission?? I have done a lot of googling around it but in vain!

There is an outside chance someone is just playing with you and submitting a blank form. Not uncommon if someone is not too familiar with forms.

RD Gateway Manager - Unable to read RD Gateway Server Settings

I'm trying to install a Remote Desktop Gateway into my domain, but I am running into a serious road-block... when I load RD Gateway Manager to configure the service, there is nothing to configure because it won't load my server into the console. When I try
to connect to it manually, it returns the following error:
"Unable to read RD Gateway Server Settings"
There are no errors or warnings in Event Viewer. I can verify that C:\Windows\System32\tsgateway\rap.xml exists and is readable. I can verify that Network Policy does have a TS_CAP_01 policy and it is enabled. A valid certificate was applied during setup
(and I've also tried choosing ask me later).
I have already tried uninstalling and reinstalling the role service (including manually verifying that the policies are removed). I also have this working on another domain server, so I'm at a loss for what to look for... How can I resolve this so that I
can finish configuring the service?

Hello,
Thanks for your post.
From your description, I understand that you’re trying to install the RD Gateway role on a Windows Server 2008 R2-based domain computer. However, after the role
is install, the RD Gateway Manager cannot be loaded into the RD Gateway Manager. The error prompts “Unable to read RD Gateway Server Settings”.
Based on my experience, the issue may be caused by problematic installation or startup of the RD Gateway role. Before we troubleshoot the issue further, I recommend
you to enable the Audit level logging in the Event Viewer and double-check the related clues in the event viewer. To do that, please use the following steps:
1.
On the RD Gateway server open RD Gateway Manager. To open RD Gateway Manager, click
Start, point to Administrative Tools, point to
Remote Desktop Services, and then click RD Gateway Manager.
2.
In the console tree, right-click the node that represents your RD Gateway server, which is named for the computer on which the RD Gateway server is running, and then
click Properties.
3.
On the
Auditing tab, select or clear the appropriate check boxes to specify the events that you want to monitor for RD Gateway, and then click
OK.
When these events occur, you can monitor the corresponding events by using Windows Event Viewer. RD Gateway Manager server events are stored in Event Viewer under
Application and Services Logs\Microsoft\Windows\Terminal Services-Gateway\.
Let us know the result if possible. We’d like to help further based on your information replied. Thanks.
Lionel Chen
TechNet
Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
This posting is provided "AS IS" with no warranties, and confers no rights.

I have problem with Adobe ColdFusion Server Manager.

I have a problem with Adobe ColdFusion Server Manager when you log on and connect to the server. An advantage of the settings do not load.

When I see others screen cuts of CF Server Manager here:
http://www.coldfusionjedi.com/index.cfm/2009/10/21/Quick-example-of-Diff-within-the-ColdFu sion-Server-Manager
http://forta.com/blog/index.cfm/2009/7/6/Simplified-ColdFusion-Server-Management
the Errors View button display’s the yellow ! sign. Without a better guide I just thought that is a normal button icon until I noticed Charlie comment earlier in the thread and I thought hold up that is not normal.
As it is when I press Errors View I get “no error” which might be because there is none or just simply not giving meaningful details as per some other CF Server Manager limitations previously noticed in other threads on forum here.
I just hope some of that helps the original post to do with the display of the settings on left side. Maybe a better look at the error might help? Does anything get logged in CFadmin UI > Debugging & Logging > Log Files that relates to issue?
Regards, Carl.

Trying to configure test server settings in DW8 and get error

I am trying to setup the test server settings so i can create
some
recordsets.. and everytime i complete the test server
settings page i get a
small box come up that says:
Macromedia Dreamweaver
! No Error Occurred.
OK
thats it.. i hit ok and the settings are there, but i still
cannot create
recordset...
ASP, SQL2005, DW8 VBScript

I get below error when i try to create a domain from import a file option.
PeopleSoft Import Application Server Configuration
1) Import from file
2) Import from application domain
q) Quit
Command to execute (1-2, q) : 1
Enter full path to configuration file
:E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
Enter domain name to create
:CRPROD1
Application Server domain CRPROD1 already exists...
1) Replace existing domain
2) Enter different domain name
q) Quit
Command to execute (1-2, q) : 2
Enter different name for domain: CRPROD
Merging old domain configuration file with new template file...
source E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
template E:\psoft\PT848\appserv\large.cfx
destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
Creating domain folder CRPROD...
Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
psappsrv.ubx
and when i try to crearte a domain with " create a domain " option , i got below error message.
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 2
Please enter name of domain to create :CRPROD1
Configuration templates:
1) developer
2) large
3) medium
4) small
Select config template number: 2
Creating domain...
Copying application server configuration files...
Stripping Annotations...
Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
Copy psasnt.val to CRPROD1\psappsrv.val failed!
Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
Copying Jolt repository file...
Copy jrepository to CRPROD1\ failed!
Domain created.
Would you like to configure this domain now? (y/n) [y] :Y
Error opening file 'psappsrv.ubx':
Error opening file 'psappsrv.ubx':
Quick-configure menu -- domain: CRPROD1
Features Settings
========== ==========
Actions
=========
1) Load config as shown
2) Custom configuration
h) Help for this menu
q) Return to previous menu
HINT: Enter 3 to edit DBNAME, then 1 to load

Flash Player Settings box Won't Close

Hi! I'm using windows 7, Internet Explorer. For months now nearly every time I try to watch a video the "adobe flash player settings" box pops up with the "allow/deny" screen. Whichever I click, the box won't go away. The whole video will play with that box right in the middle, blocking the screen. How do I close this box? I can't even move it out of the way.
I've searched for an answer, but apparently I'm the only one in the world with this problem because I can't find this topic when I search on google or yahoo.

The problem is related to our anti-clickjacking logic. Because there are pixels changing around the dialog, we think that something may be obscuring the dialog when you click, so we don't register it as valid.
The dialog is coming up because you've set a non-default setting in Flash (probably restricting the ability of sites to store Local Shared Objects on your computer). The easiest way to get around this problem is to just get rid of the dialog entirely by allowing LSOs. You can do this by going to Control Panel > Flash Player > Storage> Allow sites to save information on this computer.
This control comes from way back in the '90s, when marketers were abusing this capability of Flash to track consumer behavior by storing unique identifiers. While this technique is still used to some degree, the capabilities of HTML5 and server-side fingerprinting have far outstripped Flash's usefulness as a tracking technology for marketers in both ease and resilience. So, while you can still disable LSOs on your computer, it offers you very little in terms of privacy in 2015, and it degrades the user experience significantly.
Instead, when you do want to use Flash Player without accumulating information that might later be used to track you, use your browser's Private/Incognito browsing mode. Flash Player will still be allowed to store things on your computer (so the content runs as expected with no degradation in the experience), but it all goes into a temporary location that's destroyed when you exit the browsing session.

New Coldfusion Server Setup in Flashbuilder and Coldfusion Builder not working

I have not found the combination for adding a new Coldfusion Server in Flash Builder 4.7 or Coldfusion Builder 2.01 with Coldfusion 10. I am running windows 7 64bit. on IIS 7. Coldfusion 10 is running fine.
All was well with Coldfusion 9 Flash Builder 4.6 and Coldfusion Builder 2.0.
Local Server Settings for CF9 were
Server Home C:\Coldfusion9
Document Root C:\inetpub\wwwroot
Version: 9.0.x
Now as soon as I put in C:\Coldfusion10 or C:\Coldfusion10\cfusion I get an error "Server home is not valid".
Any hints on getting this going.

Hi Jeff,
Can you let us know the directory location for wwwroot on your system.
jeffcg2 wrote:
That does not work. As soon as I put C:\ColdFusion10\cfusion in the Server Home I get the error Server Home Invalid. I have uninstalled Coldfusion 10 and re-installed added the latest updates. Coldfusion 10 is working fine running on IIS 7.
Not necessarily. As soon as you select the "cfusion" location, it would automatically pick the wwwroot location.
jeffcg2 wrote:
With Coldfusion 10 , since you have C:\ColdFusion10\cfusion\wwwroot. as the Document root will this only work if you install the included web server?
Regards,
Anit Kumar

TB v. 24.0: Changed ISP's; ~ new email in Server Settings & Outgoing Server & all Address Books and Contacts; TB still showing old email ID for Fwd & Rply

TB v. 24.0, Win 7 Pro. Changed ISP's. I use Outlook 2007; wife uses TB, same box. Changed TB username & e-mail address in Server Settings & Outgoing Server & set as Default. Changed e-mail address in all address books and Contact lists. Now TB still showing old e-mail address in <From> when Reply or Forward. This is confusing recipients, who have been sending their replies off to a now-nonexistent account. Checked Windows Contacts - empty. Checked my Outlook 2007 - all Contacts changed appropriately. How do I kill that old e-mail address in TB when it isn't even listed any more - except when we try to Reply or Forward?

When you got the new email address and changed ISP's, you needed to create a new mail account for that new existing email address.
When a mail account is created there are many preferences setup to be able to manage and run that mail account. Trying to track down and modify all of those within the either the config editor or prefs.js is not only time consuming, but you could easily cause further problems if any error is made.
So I suggest you fix the original account by reentering all the old data. Then create a new mail account for the new exisitng mail address.
* File > New> Existing mail account.
or
* 3bar menu icon > New Message > Existing Mail account.
when you have both mail accounts in your left folder pane, you can choose to move any wanted emails from the older mail account into suitable folders in Local Folders. This will save a copy of emails.
Then you can delete the old account, leaving saved emails in Local Folders and only one new mail account.
To remove mail account:
* Tools > Account sEttings
* select old mail account
* click on 'Account Actions'
* select 'Remove Account'
* click on OK

Configure Internal Server Settings

Hello,
I am trying to configure internal server settings and when I choose my LMS to be Internal Server and then click on the Configure button the first box that should show is Server as in the image below but I get Adobe ID: and Password: boxes. I do not understand what is going on. Please help.

Do the reporter and read php files have to be at the same level as the actual captivate file in the website?
I put the two files at the root directory level.
Thanks.

Thunderbird V3 Menu location: Edit | Account Settings | account name | Server Settings not listed in edit menu?

Thunderbird v 3 help info is different than what actually is shown in the edit option list. Menu location: Edit | Account Settings | <account name> | Server Settings
Looking for ISP setting that instructs ISP(rr) to keep emails on serer until erased by user. This setting was in earlier versions of Thunderbird. This settings is used to download email to other user computers. When user's computer breaks down user has to reload email onto new setup.
Scenario is to go to Thunderbird V 3 Edit --> Account Settings and discover this option no longer exists. See earlier version where you can go to Account Settings and select email to be left on server for optional number of days or until erased by user.
Thanks for help,
Bob

This is my problem too. I don't usually need to edit settings but yahoo or gmail have had temporary problems with their smtp servers, when they do I can simply go to account settings and change from one to the other. Now when I open the account settings window and left or right click on ANY account or setting for an account in the left tree I get the error window with this message:
"The Local Directory path "C:\Users\Len\AppData\Roaming\Thunderbird\Profiles\dlcdrtl6.default\Mail\Local Folders" is not suitable for message storage. Please choose another directory."
Clicking OK in the window brings up another message window with the same message as above:
"An account with this name already exists. Please enter a different account name."
I cannot exit the account settings box by clicking OK. I need to click cancel. This effectively makes it impossible to change any account settings. This worked a few months ago as I switched smtp servers when gmail had problems, now I'm screwed if I need to.
This is a problem with one of the new versions it should be marked critical as account settings need be configurable and I don't see any workaround like there is for pasting links.

ColdFusion Server Settings box is blank

Similar Messages

Maybe you are looking for