Collation change in MS SQL SERVER 2000

As i have installed sqlserver 2000 with default collation SQL_Latin1_general_CP1_CI_AS, Now i am unable to continue ECC5.0 IDES Installation which  requires  the collation SQL_Latin_General_c850_BIN2. Please let me know how to change default collation to BIN2  in  sqlserver 2000. I have  seen note 600027 which seems to be not clear.
thanks
balan

Hi Chidam,
you have to distinguish between the server collation and the database collation. In your case, as far as I can tell, you have to uninstall SQL Server 2000 and install it again with the right collation (Binary order for use with the 850 Multilingual Character Set).
Please also refer to note 505906 which describes your scenario.
Regards,
Sven

Similar Messages

  • SQL Server 2000 -collation.

    Hi,
    If its important collation in SQL Server 2000, i have - SQL_Latin1_General_CP850_BIN(master, msdb, model etc.), but DB <SAP> haves SQL_Latin1_General_CP850_BIN2.
    I try to change collation on the server by instcoll.exe but i have error:
    C:\col\instcoll_i386>instcoll.exe -S server\DB
    Trying to connect...
    Could not connect to ..  Trying to start the server.
    [SQL-DMO]Service Control Error:  The specified service does not exist as an inst
    alled service.
    Server and remote connection working.
    BR,
    T.

    Hi,
    Thanks for help, but im read this note and still not working,  im use:
    instcoll.exe -s<server>\<DBinstance> -D<dbname>
    or
    instcoll.exe -s<server>\<DBinstance>
    And im still have error:
    C:\col\instcoll_i386>instcoll.exe -s<server>\<DBinstance>
    Trying to connect...
    Could not connect to ..  Trying to start the server.
    [SQL-DMO]Service Control Error:  The specified service does not exist as an inst
    alled service.
    Failed to start the server. Retrying.
    [SQL-DMO]Service Control Error:  The specified service does not exist as an inst
    alled service.
    Could not connect to .
    NOTHING DONE!
    BR,
    T.

  • How to find Collation setting for Analysis services in Sql server 2000

    Hi
    Can some please guide me how do I check  Collation setting for Analysis services in Sql server 2000
    i need it to install Analysis servcies on my machine

    Hi SMV123,
    We can find the collation settings for Analysis services in SQL Server Management Studio (SSMS). Connect to the SSAS instance from within SSMS->Right click on the instance and select Properties->An Analysis Server properties page will appear. And then
    on the left hand side is a Language /collation option.
    Besides, here is a link about how to install SQL Server Analysis Services 2000 for your reference.
    How to Install SQL Server 2000 Analysis Servicese
    Regards,
    Charlie Liao
    Charlie Liao
    TechNet Community Support

  • SQL Server 2000 auditing on DML changes on user tables to user databases

    Please let me know if you know if there is any procedure or steps to determine DML changes on user tables in database.

    Hello,
    You can use triggers as shown in the following article:
    http://sqlserver2000.databases.aspfaq.com/how-do-i-audit-changes-to-sql-server-data.html
    You may also consider third party tools that may still support SQL Server 2000. The following tool supported SQL Server 2000 a few years
    ago, not sure about today:
    http://www.apexsql.com/sql_tools_comply.aspx
    Server side traces may be another option:
    http://msdn.microsoft.com/en-us/library/cc293613.aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • SQL Server 2000 auditing/tracking DML changes on specific tables.

    Hello,
    We would like to audit/track all DML activities on couple of tables which reside on SQL Server 2000. Triggers are an option we think but thought that would impact performance because of activity on those tables. Could someone please suggest any other best
    options that are possible with SQL Server 2000 to capture these changes.
    Thanks,

    Hello,
    You may consider third party tools that may still support SQL Server 2000. The following tool supported SQL Server 2000 a few years
    ago, not sure about today:
    http://www.apexsql.com/sql_tools_comply.aspx
    Server side traces may be another option:
    http://msdn.microsoft.com/en-us/library/cc293613.aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Changes required to switch from SQL Server 2000 to SQL Server 2005?

    I'm converting a legacy app from SQL Server 2000 to SQL Server 2005.  The app is written in VB6 and utilizes CR 8 OCX.  When I invoke a report from VB I'm getting Error# 20599 Cannot open SQL server.  I redefined the ODBC DSN specifying Windows Authentication, and the SQL Server instance supports mixed mode.
    Searching for the error, I found an article that suggests I need p2sodbc8.zip, but I can't find a link to it in the Downloads area.
    Would greatly appreciate any help at all - including a link to p2sodbc8.zip if that's the likely resolution.
    Thanks in advance,
    Pete

    Hi Peter,
    As you are having issue with SDK's.
    I would suggest you to post your question in
    Business Objects SDK Application Development » [Legacy Application Development SDKs|;
    That forum is monitored by qualified technicians and you will get a faster response there. Also, all  SDK queries remain in one place and thus can be easily searched in one place.
    Thank you for your understanding,
    Shweta

  • MS SQL Server 2000 Service Pack 4 upgrade

    Hi,
    I need to upgrade my actual SAP DataBase SQL Server 2000 from Service Pack 2 to Service Pack 4 in order to be more secure as a MS consultant is requesting, but following the comments on the SAP note 1026116 attached file, which references this MS article:
    http://download.microsoft.com/download/1/B/D/1BDF5B78-584E-4DE0-B36F-C44E06B0D2A3/ReadmeSql2k32sp4.htm
    Referenced Text:
    "If your instance of SQL Server 2000 is being used by an application, first check with the provider of the application whether there are any SQL Server 2000 upgrade considerations specific to that application. "
    So following this instructions is there any SQL Server 2000 upgrade to Service Pack 4 considerations for a SAP Database of an ERP R3 ECC 6.0.
    Could anyone can help me please with this question?
    Best Regards,
    Erik Espinosa

    Hi,
    Service Pack 4 is supported and recommended for SAP ERP ECC 6.0. There are currently no known issues with upgrading to this service pack. The mentioned collation change don't have to be performed as long as you are not planning to upgrade to SQL Server 2005.
    Best regards
      Clas

  • Junk arabic details while transfer arabic data from sql server 2000 to orac

    We are facing problems to view arabic details in oracle which is transfered from sql server 2000 .
    In oracle database we are using charecterset is UTF8.
    NLS_CHARACTERSET :UTF8 and NLS_NCHAR_CHARACTERSET:UTF8
    Sqlr server collation is SQL_Latin1_General_CP1256_CI_AS.
    we are using stored procedure for transfering data from sql server 2000 to oracle.
    And i am able to view some arbic details which is not transfered from sql server 2000.
    I thing some configuration i need to change in sql server.
    Can any one help me out from this issue?

    I know that this is not the correct forum to ask this question.
    If someone knows this issue please help me.
    We were using to import from another intermediate sqlserver and it was successfull.
    And more over i cannot change anything in oracle database which is live.
    The issue is we are using one intermediate sqlserver for transfering the data to oracle apart from main sqlserver.
    now we want to stop the intermediate and need to transfer from main sqlserver to oracle Db.
    i guess , i need to change some configuration in main sql server.
    Main sql server and intermediate have the same collation.
    Could you please help me out from this problem?

  • Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

    Hi All,
    I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
    Here is my server.xml
    <Server port="8005" shutdown="SHUTDOWN" debug="0">
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
    debug="0"/>
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
    debug="0"/>
    <GlobalNamingResources>
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved">
    </Resource>
    <ResourceParams name="UserDatabase">
    <parameter>
    <name>factory</name>
    <value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
    </parameter>
    <parameter>
    <name>pathname</name>
    <value>conf/tomcat-users.xml</value>
    </parameter>
    </ResourceParams>
    <Resource auth="Container" description="Users and Groups
    Database" name="UserDatabase"
    scope="Shareable"
    type="org.apache.catalina.UserDatabase"/>
    <Resource name="jdbc/DefaultDS" scope="Shareable"
    type="javax.sql.DataSource"/>
    <ResourceParams name="UserDatabase">
    <parameter>
    <name>factory</name>
    <value>org.apache.catalina.users.
    MemoryUserDatabaseFactory</value>
    </parameter>
    <parameter>
    <name>pathname</name>
    <value>conf/tomcat-users.xml</value>
    </parameter>
    </ResourceParams>
    <ResourceParams name="jdbc/DefaultDS">
    <parameter>
    <name>validationQuery</name>
    <value></value>
    </parameter>
    <parameter>
    <name>user</name>
    <value>sa</value>
    </parameter>
    <parameter>
    <name>maxWait</name>
    <value>5000</value>
    </parameter>
    <parameter>
    <name>maxActive</name>
    <value>4</value>
    </parameter>
    <parameter>
    <name>password</name>
    <value>sa</value>
    </parameter>
    <parameter>
    <name>url</name>
    <value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
    </parameter>
    <parameter>
    <name>driverClassName</name>
    <value>sun.jdbc.odbc.JdbcOdbcDriver</value>
    </parameter>
    <parameter>
    <name>maxIdle</name>
    <value>2</value>
    </parameter>
    </ResourceParams>
    </GlobalNamingResources>
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Tomcat-Standalone">
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8080" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="100" debug="0" connectionTimeout="20000"
    useURIValidationHack="false" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to -1 -->
    <!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8443" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" scheme="https" secure="true"
    useURIValidationHack="false" disableUploadTimeout="true">
    <Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
    clientAuth="false" protocol="TLS" />
    </Connector>
    -->
    <!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8009" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" connectionTimeout="0"
    useURIValidationHack="false"
    protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
    <!-- Define an AJP 1.3 Connector on port 8009 --><Logger className="org.apache.catalina.logger.FileLogger"
    prefix="catalina_log." suffix=".txt"
    timestamp="true"/>
    <!-- Define the default virtual host -->
    <Host name="localhost" debug="0" appBase="webapps"
    unpackWARs="true" autoDeploy="true">
    <Logger className="org.apache.catalina.logger.FileLogger"
    directory="logs" prefix="localhost_log." suffix=".txt"
    timestamp="true"/>
    <Environment name="maxExemptions" type="java.lang.Integer"
    value="15"/>
    <Parameter name="context.param.name" value="context.param.value"
    override="false"/>
    <Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/DefaultDS">
    <!-- Maximum number of dB connections in pool.
    Set to 0 for no limit.
    -->
    <parameter>
    <name>maxActive</name>
    <value>8</value>
    </parameter>
    <!-- Maximum number of idle dB connections to retain in pool.
    Set to 0 for no limit.
    -->
    <parameter>
    <name>maxIdle</name>
    <value>4</value>
    </parameter>
    <!-- Maximum time to wait for a dB connection to become available
    in ms, in this example 10 seconds. An Exception is thrown if
    this timeout is exceeded. Set to -1 to wait indefinitely.
    -->
    <parameter>
    <name>maxWait</name>
    <value>5000</value>
    </parameter>
    <!-- MS Sql Server dB username and password for dB connections
    -->
    <parameter>
    <name>user</name>
    <value>sa</value>
    </parameter>
    <parameter>
    <name>password</name>
    <value>sa</value>
    </parameter>
    <!-- Class name for MS Sql Server JDBC driver
    -->
    <parameter>
    <name>driverClassName</name>
    <value>sun.jdbc.odbc.JdbcOdbcDriver</value>
    </parameter>
    <!-- The JDBC connection url for connecting to MS Sql Server dB.
    -->
    <parameter>
    <name>url</name>
    <value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
    </parameter>
    <!-- This Databae Connection Pool Description.
    -->
    <parameter>
    <name>description</name>
    <value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
    </parameter>
    </ResourceParams>
    <Resource name="mail/Session" auth="Container"
    type="javax.mail.Session"/>
    <ResourceParams name="mail/Session">
    <parameter>
    <name>mail.smtp.host</name>
    <value>localhost</value>
    </parameter>
    </ResourceParams>
    <ResourceLink name="linkToGlobalResource"
    global="simpleValue"
    type="java.lang.Integer"/>
    </Host>
    </Engine>
    </Service>
    </Server>
    and my web.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
    <!-- Standard Action Servlet Mapping -->
    <web-app>
    <resource-ref>
    <res-ref-name>jdbc/DefaultDS</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    </web-app>
    and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
    InitialContext initCtx = new InitialContext();
    DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
    Connection con = ds.getConnection();
    return con;
    I tried connecting as mentioned in this website
    http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
    Please help urgent
    Sorry for long file. Can any one please help me in solving this problem.
    Thanks in advnace
    Kurakula

    I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
    The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
    MOD

  • Creating a connection pool using SQL Server 2000, Sun ONE Application Serve

    Has any one succesfully configured SQL Server 2000 to work with Sun ONE Application Server 7 on Windows 2000 server service pack 4? I am embarking on a new J2EE project and I need to configure it as soon as possible.
    The problem I am having is that, when I ping the data souce name, there is a connection error.
    I have set the data source name and other details as follows:
    Under JDBC, I have set the parameters for the connection pool as follows:
    Data Source Name:      com.microsoft.jdbc.sqlserver.SQLServerDriver
    Database Name:          jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=Test
    User:               test
    Password:          test
    In the JVM settings page, I have set the prefix class path as follows for the location of the Microsoft JDBC
    drivers that I downloaded as follows:
    c:\microsoft\drivers/lib/msbase.jar
    c:\microsoft\drivers/lib/msutil.jar
    c:\microsoft\drivers/lib/mssqlserver.jar
    Under JVM Options, there is a strange setting which I don't understand: perhaps this is the cause of the
    connction error?
    -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
    Please help????

    I'm in a similar boat...
    Trying to setup AS7 JDBC and followed the instructions on the link you provided and get the following exception. I kept the case the same, thinking 'setpassword" was incorrect, so I tried changing the property to "Password", but get the same exception but it points to "setPassword" instead.
    SEVERE: RAR5041:Cannot get jdbc connection
    com.sun.enterprise.repository.J2EEResourceException
    java.lang.NoSuchMethodException: setpassword
    at com.sun.enterprise.repository.JdbcConnectionPool.createDataSource(JdbcConnectionPool.java:243)
    at com.sun.enterprise.resource.JdbcUrlAllocator.createResource(JdbcUrlAllocator.java:80)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:856)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:416)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:625)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:520)
    at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:263)
    at com.sun.enterprise.resource.JdbcXAConnection.<init>(JdbcXAConnection.java:74)
    at com.sun.enterprise.resource.Jdbc10XaAllocator.createResource(Jdbc10XaAllocator.java:94)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:856)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:416)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:625)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:520)
    at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:263)
    at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:170)
    at com.sun.enterprise.resource.JdbcDataSource.internalGetConnection(JdbcDataSource.java:241)
    at com.sun.enterprise.resource.JdbcDataSource.getConnection(JdbcDataSource.java:98)
    at com.rvi.database.jdbcConnection.getConnection(jdbcConnection.java:93)
    at com.webapp.database.ArticlesDAO.selectByYear(ArticlesDAO.java:102)
    at com.webapp.actions.ArticleAction.list(ArticleAction.java:96)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
    at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:216)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
    at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
    at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
    at java.security.AccessController.doPrivileged(Native Method)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
    at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)
    at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)

  • Exceptions thrown while importing tables from SQL Server 2000

    Hi all,
    <MyProblem:
    I cannot import the tables defined in my local SQL Server. An exception is thrown --oracle.jdeveloper.cm.ds.db.ValidationException: Columns of type varchar cannot have a size specified.
    />
    <What I have done:
    In Oracle JDev 10g, Created a new DB connection called "SQLServerConnection" to connect to the SQL Server and it works fine. I am able to see all tables by expanding the connection.
    During the creation of a new partner link named "DBAdapter", I use the adapter wizard to select DB Adapter and then select the "SQLServerConnection" DB connection I have created. I select Perform an Operation on a Table and then check Select. After I pressed OK button on the[i] Import Tables  dialog, a Error messege box emmerged indicating the Exception: Columns of type varchar cannot have a size specified.
    I try to change the data type of the columns of the tables to char, there is still similar exception (Columns of type char cannot have a size specified).
    />
    I got the stack trace from the prompt by using jdev.exe.
    <StackTrace:
    oracle.jdeveloper.cm.ds.db.ValidationException: Columns of type varchar cannot h
    ave a size specified.
    at oracle.jdeveloper.offlinedb.OfflineDBTableValidator.validateObject(Of
    flineDBTableValidator.java:116)
    at oracle.jdeveloper.cm.ds.db.AbstractDBObjectProvider.validateObject(Ab
    stractDBObjectProvider.java:601)
    at oracle.jdeveloper.offlinedb.OfflineDBObjectProvider.updateObject(Offl
    ineDBObjectProvider.java:952)
    at oracle.tip.tools.ide.pm.wizard.adapter.db.DBAdapterDescriptorGenerato
    r.generate(DBAdapterDescriptorGenerator.java:274)
    at oracle.tip.tools.ide.pm.wizard.adapter.db.DBAdapterSelectTablePage.ac
    tionPerformed(DBAdapterSelectTablePage.java:451)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:17
    86)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Abstra
    ctButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel
    .java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonL
    istener.java:245)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:151)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:141)
    at java.awt.Dialog$1.run(Dialog.java:540)
    at java.awt.Dialog.show(Dialog.java:561)
    at java.awt.Component.show(Component.java:1133)
    at java.awt.Component.setVisible(Component.java:1088)
    at oracle.bali.ewt.wizard.WizardDialog.runDialog(Unknown Source)
    at oracle.tip.tools.ide.pm.wizard.adapter.techAdapterWizard.display(tech
    AdapterWizard.java:151)
    at oracle.tip.tools.ide.pm.bpelgraph.editors.PartnerLinkEditPage.handleA
    dapterWizard(PartnerLinkEditPage.java:311)
    at oracle.tip.tools.ide.pm.bpelgraph.editors.PartnerLinkEditPage.actionP
    erformed(PartnerLinkEditPage.java:893)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:17
    86)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Abstra
    ctButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel
    .java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonL
    istener.java:245)
    at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:2
    31)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:151)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:141)
    at java.awt.Dialog$1.run(Dialog.java:540)
    at java.awt.Dialog.show(Dialog.java:561)
    at oracle.tip.tools.ide.pm.bpelgraph.editors.PartnerLinkDialog.create(Pa
    rtnerLinkDialog.java:90)
    at oracle.tip.tools.ide.pm.bpelgraph.collaxalaf.BPELGraphPane.createPart
    nerLink(BPELGraphPane.java:324)
    at oracle.tip.tools.ide.pm.bpelgraph.collaxalaf.BPELDNDDropHandler.handl
    eDrop(BPELDNDDropHandler.java:77)
    at oracle.tip.tools.ide.common.graph.DefaultGraphPaneDropTargetListener.
    routeToDropHandler(DefaultGraphPaneDropTargetListener.java:212)
    at oracle.tip.tools.ide.common.graph.DefaultGraphPaneDropTargetListener.
    handleDrop(DefaultGraphPaneDropTargetListener.java:200)
    at oracle.tip.tools.ide.pm.bpelgraph.collaxalaf.BPELGraphPaneDropTargetL
    istener.handleDrop(BPELGraphPaneDropTargetListener.java:75)
    at oracle.tip.tools.ide.common.graph.DefaultGraphPaneDropTargetListener.
    drop(DefaultGraphPaneDropTargetListener.java:260)
    at java.awt.dnd.DropTarget.drop(DropTarget.java:398)
    at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTarget
    ContextPeer.java:542)
    at sun.awt.dnd.SunDropTargetContextPeer.access$800(SunDropTargetContextP
    eer.java:52)
    at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEven
    t(SunDropTargetContextPeer.java:805)
    at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(Su
    nDropTargetContextPeer.java:743)
    at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:29)
    at java.awt.Component.dispatchEventImpl(Component.java:3494)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
    at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:
    3269)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3123)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    />
    <Oracle:
    Oracle JDeveloper 10.1.2.0.0 (Build 1811)
    Oracle IDE     10.1.2.17.84
    Business Components Version     10.1.2.17.96
    UML Modelers Version     10.1.2.16.71
    Versioning Support     10.1.2.16.71
    WebDAV Support Version     10.1.2.16.71
    Struts Modeler Version     10.1.2.6.15
    BPEL Designer     10.1.2.0.0 (Build 050504)
    Designer Generators Framework     10.1.2.7.56
    ADF UIX     2.2.16
    java.version     1.4.2_06
    java.home     E:\OraBPELPM\jdk\jre
    java.vm.name     Java HotSpot(TM) Client VM
    java.vm.vendor     Sun Microsystems Inc.
    java.vm.version     1.4.2_06-b03
    user.language     zh
    user.region     <no value assigned>
    user.name     Administrator
    user.home     C:\Documents and Settings\Administrator
    user.dir     E:\OraBPELPM\integration\jdev\jdev\bin
    os.name     Windows 2003
    os.version     5.2
    os.arch     x86
    http.proxyHost     jproxy.nju.edu.cn
    http.proxyPort     8080
    />
    <SQL Server:
    Microsoft SQL Server 2000 with the Microsoft SQL Server 2000 Driver for JDBC Service Pack 3 installed
    />
    By the way, I have read the thread Thread: DB Adapter not importing SQL Svr tables and take some of their advises but the problem still exist.
    Any help would be greatly appreciated.
    Thanks!
    And Merry Christmas to all!

    Hi, ronen!
    Thank you.
    I followed the steps and the there were no exceptions then.
    However, new runtime error emerged.
    The BPEL PM Server cannot build Toplink Session. But I do not know why.
    The messeges from the "Start BPEL PM Server" console about this project (named "TryDB") is as following (DoSelect is the service name of the DB Adapter):
    <::Outbound><oracle.tip.adapter.db.ox.TopLinkXMLProjectInitializer initialize> I
    nitializing an existing toplink project for use by the database adapter.
    <::Outbound><oracle.tip.adapter.db.ox.TopLinkXMLProjectInitializer initialize> I
    nitializing an existing toplink project for use by the database adapter.
    <2006-01-10 16:03:02,656> <INFO> <default.collaxa.cube.compiler> &#27491;&#22312;&#39564;&#35777; "E:\Or
    aBPELPM\integration\orabpel\domains\default\tmp\.bpel_TryDB_1.0.jar\TryDB.bpel"
    <2006-01-10 16:03:05,156> <INFO> <default.collaxa.cube.engine.deployment> <CubeP
    rocessFactory::generateProcessClass>
    &#27969;&#31243; "TryDB" (&#20462;&#35746; "1.0") &#32534;&#35793;&#25104;&#21151;&#12290;
    <2006-01-10 16:03:05,765> <INFO> <default.collaxa.cube.engine.deployment> &#27969;&#31243; "
    TryDB" (&#20462;&#35746;&#26631;&#35760; "1.0") &#24050;&#25104;&#21151;&#21152;&#36733;&#12290;
    06/01/10 16:03:34 Tutalii: E:\OraBPELPM\integration\orabpel\lib\orabpel.jar arch
    ive
    <2006-01-10 16:03:34,500> <INFO> <default.collaxa.cube.ws> <AdapterFramework::Ou
    tbound> file:/E:/OraBPELPM/integration/orabpel/domains/default/tmp/.bpel_TryDB_1
    .0.jar/DoSelect.wsdl [ DoSelect_ptt::DoSelectSelect(DoSelectSelect_inparameters,
    AirlineTableCollection) ] - Using JCA Connection Pool - max size = <unbounded>
    <2006-01-10 16:03:35,093> <ERROR> <default.collaxa.cube.ws> <Database Adapter::O
    utbound> <oracle.tip.adapter.db.DBManagedConnectionFactory acquireClientSession>
    unable to build the TopLink Session
    <2006-01-10 16:03:35,125> <ERROR> <default.collaxa.cube.ws> <Database Adapter::O
    utbound> <oracle.tip.adapter.db.DBInteraction executeOutboundRead> unable to exe
    cute the NamedQuery: TryDB.AirlineTable.DoSelectSelect
    <2006-01-10 16:03:35,125> <ERROR> <default.collaxa.cube.ws> <AdapterFramework::O
    utbound> file:/E:/OraBPELPM/integration/orabpel/domains/default/tmp/.bpel_TryDB_
    1.0.jar/DoSelect.wsdl [ DoSelect_ptt::DoSelectSelect(DoSelectSelect_inparameters
    ,AirlineTableCollection) ] - Could not invoke operation 'DoSelectSelect' against
    the 'Database Adapter' due to:
    ORABPEL-11622
    &#26080;&#27861;&#21019;&#24314;/&#35775;&#38382; TopLink &#20250;&#35805;.
    &#27492;&#20250;&#35805;&#29992;&#20110;&#36830;&#25509;&#21040;&#25968;&#25454;&#23384;&#20648;&#12290;.
    &#26377;&#20851;&#29305;&#23450;&#24322;&#24120;&#38169;&#35823;, &#35831;&#21442;&#38405;&#26681;&#24322;&#24120;&#38169;&#35823;&#12290;&#24744;&#21487;&#33021;&#38656;&#35201;&#22312; j2ee/home/application-deploymen
    ts/default/DbAdapter/oc4j-ra.xml &#20013;&#37197;&#32622;&#36830;&#25509;&#35774;&#32622;&#24182;&#37325;&#26032;&#21551;&#21160;&#26381;&#21153;&#22120;&#12290;&#30001; $J2EE_HOME/a
    pplication-deployments/default/DbAdapter/oc4j-ra.xml &#23548;&#33268;&#12290;
    <2006-01-10 16:03:35,125> <INFO> <default.collaxa.cube.ws> <AdapterFramework::Ou
    tbound> Change logging level for Logger 'default.collaxa.cube.ws' to DEBUG to se
    e full error stack
    <2006-01-10 16:03:35,125> <ERROR> <default.collaxa.cube.ws> <AdapterFramework::O
    utbound> file:/E:/OraBPELPM/integration/orabpel/domains/default/tmp/.bpel_TryDB_
    1.0.jar/DoSelect.wsdl [ DoSelect_ptt::DoSelectSelect(DoSelectSelect_inparameters
    ,AirlineTableCollection) ] - Rolling back JCA LocalTransaction
    And in the Audit part of the BPEL Console, I got the following "details"
    <remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    <part name="code">
    <code>4003</code>
    </part>
    <part name="summary">
    <summary>file:/E:/OraBPELPM/integration/orabpel/domains/default/tmp/.bpel_TryDB_1.0.jar/DoSelect.wsdl [
    DoSelect_ptt::DoSelectSelect(DoSelectSelect_inparameters,AirlineTableCollection) ] - WSIF JCA Execute of operation
    'DoSelectSelect' failed due to: ????/?? TopLink ??. ?????????????. ; nested exception is: ORABPEL-11622 ????/??
    TopLink ??. ?????????????. ????????, ??????????????? j2ee/home/application-deployments/default/DbAdapter/oc4j-ra.xml
    ????????????????? $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml ???</summary>
    </part>
    <part name="detail">
    <detail>??????: ????????? [com.microsoft.jdbc.sqlserver.SQLServerDriver]?</detail>
    </part>
    </remoteFault>
    My oc4j-ra.xml has the following content (SQLServerConnection is the name of the connection of SQL Server database):
    <connector-factory location="eis/DB/SQLServerConnection" connector-name="Database Adapter">
         <config-property name="driverClassName" value="com.microsoft.jdbc.sqlserver.SQLServerDriver"/>
         <config-property name="connectionString" value="jdbc:microsoft:sqlserver://localhost:1433;SelectMethod=cursor;databasename=lxbpel"/>
         <config-property name="userName" value="bpel"/>
         <config-property name="password" value="bpel"/>
         <config-property name="minConnections" value="5"/>
         <config-property name="maxConnections" value="5"/>
         <config-property name="minReadConnections" value="1"/>
         <config-property name="maxReadConnections" value="1"/>
         <config-property name="usesExternalConnectionPooling" value="false"/>
         <config-property name="dataSourceName" value=""/>
         <config-property name="usesExternalTransactionController" value="false"/>
         <config-property name="platformClassName" value="oracle.toplink.internal.databaseaccess.SQLServerPlatform"/>
         <config-property name="usesNativeSequencing" value="true"/>
         <config-property name="sequencePreallocationSize" value="50"/>
         <config-property name="tableQualifier" value=""/>
    </connector-factory>
    I think this configuration in this oc4j-ra.xml is fine
    So please help me again. I owe you so much.
    Thank you!

  • Problem of Teststand3.1 database and microsoft SQL Server 2000 personal edition

    I have a problem when using teststand database function with Microsoft sql server 2000. the error(seen in attached screenshot3.jpg) is:
    "An error occurred calling 'LogResults' in 'ITSDBLog' of 'DBLog 1.0 Type Library'
    An error occurred executing a statement.
    Schema: Generic Recordset (NI).
    Statement: UUT_RESULT.
    [Microsoft][ODBC SQL Server Driver][SQL Server]unable to insert NULL value to column "ID", table "test.dbo.UUT_RESULT";This column is not alowed to be blank. INSERT Failed. Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
    [Microsoft][ODBC SQL Server Driver][SQL Server]terminated.
    Source: TSDBLog"
     Here I listed my proceess.
    1, Configure in SQL Sever, please see attached screenshot0.jpg
       a, Open SQL
       b, build a new database with the name of test
       c, import the data from "C:\Program Files\National Instruments\TestStand 3.1\Components\NI\Models\TestStandModels\Database\TestStand Results.mdb"
    2, Configure Microsoft SQL sever: please see attached screenshot1.jpg
       a, Open windows Control Panel and select "Data Sources (ODBC). Under system DSN tab, add a SQL server data source
    3, Configure teststand database option, see attached screenshot2.jpg
       a, configure logging option, enable
       b, configure datalink
       c, select schemas of "Generic recordset (NI)
       d, No change on the tabs of "statements" and "Columns/Parameters"
    4, run an seqence file with the proess model of SequentialModel.Seq.
    Attachments:
    Screenshot.zip ‏425 KB

    Thanks Scott,
      The database function is OK now after I changed imported tables in SQL Sever.
      Actually, I once tried anothor method that you refered by using the scripts
    located at: <TestStand>\Components\NI\Models\TestStandModels\Database\SQL Server Create Generic Recordset Result Tables.sql. Attached is the error screenshots, please help me on this.
    Thanks
    Jacky
    Attachments:
    Error.jpg ‏59 KB

  • Connecting to SQL Server 2000 with MS SQL Server Driver for JDBC

    Hi,
    I am brand new to JDBC . I have installed JDBC driver (for JDBC 2.0) from the Microsoft site and made relevant changes to the class path variable to include the driver paths, as suggested in the driver help documnnts. I have written a simple java code to register. But i get "class NotFound" error.
    here's my code. What am I doing wrong? Thnaks for the help....
    class Test {
         public Test() throws Exception {
              // Get Connection
         //     Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
         DriverManager.registerDriver (new com.microsoft.jdbc.sqlserver.SQLServerDriver());
              Connection conn = DriverManager.getConnection("jdbc:microsoft:sqlserver://SQL1:1433",myuser,mypwd);
              if (conn != null) {
                   System.out.println();
                   System.out.println("Successful Connection");
                   System.out.println();
                   // Meta Data
                   DatabaseMetaData meta = conn.getMetaData();
                   System.out.println("\n Driver Information");
                   System.out.println("Driver Name: " + meta.getDriverName());
                   System.out.println("Driver Version: " + meta.getDriverVersion());
                   System.out.println("\n Database Information");
                   System.out.println("Database Name: " + meta.getDatabaseProductName());
                   System.out.println("Database Version: " + meta.getDatabaseProductVersion());
         } //Test
         public static void main(String [] args) throws Exception {
              Test test = new Test();
    }

    Hi MoD,
    This is the exact command I used for compiling
    C:\>javac -classpath "c:\java;c:\Program Files\Microsoft SQL Server 2000 Driver
    for JDBC\lib\mssqlserver.jar;c:\Program Files\Microsoft SQL Server 2000 Driver f
    or JDBC\lib\msbase.jar;c:\Program Files\Microsoft SQL Server 2000 Driver for JDB
    C\lib\msutil.jar" c:\java\Test.java
    To Execute I used
    C:\>java -classpath "c:\java;c:\Program Files\Microsoft SQL Server 2000 Driver
    for JDBC\lib\mssqlserver.jar;c:\Program Files\Microsoft SQL Server 2000 Driver f
    or JDBC\lib\msbase.jar;c:\Program Files\Microsoft SQL Server 2000 Driver for JDB
    C\lib\msutil.jar" c:\java\Test
    In fact it kept thrwing up the Class Not Found error for the above commands.
    But as U suggested I removed the classpath and executed both javac and java commands without classpath clause , and guess what it worked for the line
    Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
    (i.e., it dint throw any exception like before). So can I assume that driver is successfully registered?
    I tried using Jcreator for compile and run. But I got the same error msg as the commands given above with calsspath caluse. Is there a way around for this to make it work from an external editing tool like Jcreator apart from removing the classpath option from the JDKTool optional setting(doing this did not help for me)
    Also one last favor: How do I connect with the trusted connection option? (i.e. it should use already logged in windows authentification login)
    Thanks for all U'r help. I appreciate it very much.
    Suma

  • Storing Unicode data in SQL Server 2000

    hello,
    I'm currently developing a website which must store Cyrillic characters in a SQL Server 2000 database. I know the database can store the data correctly because when I use the MS Front end to connect to the database I am able to copy/paste the text into the database columns correctly.
    Retrieving the data from the database also works correctly and is displayed with the correct characters.
    The problems I am having is that the text seems to get garbled during the SQL insert by the database driver. If I print out the SQL just before it is inserted the characters are still correct but once they get into the database they are wrong. I'm using the JDBC drive to connect to the database.
    Any help would be appreciated,
    Alan

    I change the way I was storing the data from using unicode to getting the char values of each letter (ie \u1041 for &#1041;) and storing them in the database. Then I parse the numbers when I bring them back out and combine them into the original String

  • Database Connection in SQL Server 2000

    Hi All!
    I would like to ask your expertise regarding JDBC-MS SQL Server 2000.
    I have here a sample code in connecting to SQL Server 2000, AgriMrpPrd Database using the account "sa" and the password "092802". I have tried running the code in my local server at home and It successfully runs, but when I tried running it on my local server in the office, I was not able to create a connection object though I already have changed the HOST, PORT, DATABASE, USERNAME, and PASSWORD values.
    I have tried logging in using my local account, removed the LAN connection, start my local server and tried connecting to it but still it does not work.
    I have tried turning the firewall OFF and try reconnecting but it there was no improvement.
    I do not know if there is a difference if there is my computer is on a DOMAIN (althought I am only connecting to my local server).
    Source Code:
    import javax.swing.*;
    import java.sql.*;
    import com.microsoft.jdbc.sqlserver.*;
    public class SQLServerConnection{
    public String un, pw, db, host, port, url, driver;
    public Connection conn=null;
    public void connectDB(){
    String msg="",title="MS SQL Server - JDBC:ODBC Connection";          
    int msgType=0;
    driver="com.microsoft.jdbc.sqlserver.SQLServerDriver";
    host="206.101.216.95";
    port="1433";
    un="sa";
    pw="092803";
    db="AgriMrpPrd";
    url="jdbc:microsoft:sqlserver://" + host + ":" + port + ";DatabaseName=" + db;
    try{
    Class.forName(driver);
    conn=DriverManager.getConnection(url,un,pw);     
    System.out.println("Connected to Database!");                    
    }catch(Exception ex){
    msg="Unable to connect to MS SQL Server!";
    msgType=JOptionPane.ERROR_MESSAGE;
    JOptionPane.showMessageDialog(null,msg,title,msgType);
    System.exit(0);               
    public static void main(String args[]){
    SQLServerConnection ssc=new SQLServerConnection();
    ssc.connectDB();
    Please give me wisdom in handling this problem...
    Take care always and God blesss
    MADz

    Hi All!
    I would like to ask your expertise regarding JDBC-MS
    SQL Server 2000.
    I have here a sample code in connecting to SQL Server
    2000, AgriMrpPrd Database using the account "sa" and
    the password "092802". I have tried running the code
    in my local server at home and It successfully runs,
    but when I tried running it on my local server in the
    office, I was not able to create a connection object
    though I already have changed the HOST, PORT,
    DATABASE, USERNAME, and PASSWORD values.If the code runs in one place and not the other, it's got to be a problem with seeing the host.
    I have tried logging in using my local account,
    removed the LAN connection, start my local server and
    tried connecting to it but still it does not work.
    I have tried turning the firewall OFF and try
    reconnecting but it there was no improvement.
    I do not know if there is a difference if there is my
    computer is on a DOMAIN (althought I am only
    connecting to my local server).I have no idea how to fix your problem, but there are several things to comment on about your code:
    (1) You don't have to import the microsoft package. It's actually a bad idea.
    (2) I'd name this class DbConnection, because if you wrote it properly it might have a chance of being useful wih other databases, too.
    (3) You hardwire all the connection information. Better to pass it in so changing the database doesn't require a recompile.
    (4) It's bad to mingle Swing and database code. Take those JOptionPane calls out.
    (5) Print the stack trace out when you catch an exception. You're losing a lot of information by handling it that way.
    %

Maybe you are looking for