Collecting data from register via MODBUS into array

Hello there,
I have trying loads of different approaches to do something as simple as collecting a value(an U16 value) of a register(via modbus) and store it in a simple 1D array indexed in every iteration by means of a for loop.
THe example that I thought it could fit into my application is attached, but it does not collect anything.
What do I do wrong??
In the image attached, please see below, the register contais a 183 value on every interation(two in this example), and nothing is stored in the Array!
Thanks in advance.
Solved!
Go to Solution.

Hi Rcano,
please go through beginner courses offered by NI and read the labVIEW help. Learn things like "auto-indexing"!
You need to index the first value of your "Register" data and wire that value to the FOR loop border. The loop will create an array by AUTO-INDEXING…
I am trying to use the iteration number of the for loop to index an array and store those two values in it.
Right now you don't use the iteration number (and you don't need to). You would use it when you have a pre-defined array in a shift register and take the function ReplaceArraySubset to replace values in that array. This is a basic programming technique in LabVIEW that you should have learned in those beginner courses…
I have been trying all ways I can possible think, and I am not able to do such as simple thing.
You missed autoindexing as the simplest solution. That is tought in the beginner courses offered by NI.
Did I mention those beginner courses offered by NI (for free!)?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

Explorer failed to collect data from SE6920 array

Hi,
Any kind soul out there can provide advice how can I collect data from SE6920 using the explorer command ?
The man page of explorer says that to collect data from SE6920 aray, an input file "se6920inout.txt" with login info
must be exist under the /etc/opt/SUNWexplo directory of the server connected to th array.
However, the data collection failed while trying to retrieved from the array. The error as follow :
Gathering data for SE6920 machine at 10.12.22.39...
Nov 18 09:24:12 sslab-79[25355] se6920: ERROR Data collection for 10.12.22.39 failed because the /tmp directory is either 100 percent full,
patch 114591-22 or higher is not installed on the SP, or fix for BugID 6448763 has not yet been implemented.
Thanks very much reading this message.

If all of the files are in the same folder you can use List Folder to list all of the files based on a pattern. You can then use this to auto-index a for loop.

How can i control NI-6115 to collect data from 2 channels and save as 2 files?

I want to program NI-6115 card to collect data from 2 channels and save the two data into two different filenames that i specified?
How do i write in labview codes?

Calibur,
LabVIEW includes a number of examples that demonstrate how to acquire analog input data and write it to disk. Dependent upon the type of file you would like to use, I would suggest that you examine one of the following examples:
Cont Acq to File (binary).vi
Cont Acq to File (scaled).vi
Cont Acq to Spreadsheet File.vi
With regards to writing each channel's data to a separate file, you will need to use the Index Array function to generate two 1-D arrays, each containing data for one channel. These arrays can then be written to separate files using two Write File functions.
Good luck with your application.
Spencer S.

How to add a new view in Factsheet to collect data from R3

Hi Experts,
I need to add a new view in Account Factsheet called 'Open Delivery data'
which will collect the delivery data from R3 system.
As I know we have two Function Modules (at CRM) 'CRMT_ERP_FACT_SHEET_RETRIEVE'
(at R3) 'CRM_CCKPT_EXPORTSUMMARY'
All We need to do is create view which calls the data from R3 Via these modules.
How should I proceed.
Is this relevent steps :-
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Regards,
Ram

Hi Sandeep,
To add a new currency in Metadata, just add in Currencies dimension, and to add in Data form-just send the script what you are using as of now for rest of the currencies, or follow the same steps as specified above. or just add the script A#CLORATE.w#Periodic.C2#XYZ in rows of your data form (where XYZ- is the new currency).
To add a new location in FDM login to FDM web client- click on Metadata--> locations and select the Controls review location where you want to add the data load location, right click and add the new location.

Use Java to collect data from HTML

Hi Guys
I am doing a online stock trading project, the main part is to collect raw data from http://finance.yahoo.com User can retrieve the stock detail by inputting the right stock symbol, such as "AOL". I dont have too much problem in this part because yahoo provde a spreedsheet format to display the result. If you type the URL below, it can bring you a set of stock data separating by comma. So, I can use StringTokenizer(date, ",") to collect each data from yahoo into my system.
========================================================================
http://finance.yahoo.com/d/quotes.csv?f=sl1d1t1c1ohgv&e=.csv&s=AOL&
"AOL",15.57,"8/12/2003","4:01pm",+0.04,15.47,15.63,15.40,12097200
========================================================================
However beside this function, I also need to search Stock Symbol, because user may only know the company name. Although Yahoo finance also provide this function, with no spreedsheet format provided. So, if I type the URL below, it will only give me a set of result BUT in HTML format.
========================================================================
http://finance.yahoo.com/l?s=AOL&t=S&m=
========================================================================
So, can anyone tell me what is the best way to collect data from a HTML page? Or anyone know any good stock quoting sites which also provide spreedsheet format?
Thank you very much
Kel

I am doing a online stock trading project, the
the main part is to collect raw data from
http://finance.yahoo.com
Sounds fun.
So, can anyone tell me what is the best way to
to collect data from a HTML page? Or anyone know any
good stock quoting sites which also provide
spreedsheet format?I really don't know any other stock quote sites. But if you want to implement a search function for stock names, I would do it like this
1) Code the HTTP SUBMIT/POST to lookup the possible stock names
2) Use XSL to filter out the HTML path to the table with results, the layout is consistent, so there are no strange exceptions. You can check the DOM structure by using Mozilla's DOM inspector. Just write down the path to the TABLE element and select it, and transform it to CSV for example.
3) Reparse the CSV to fill some boxes
To possibly save some server load use a small fixed size in memory cache to store N requests based on some strategy.
The other part is actual a separate part of what you want to code and should be a separate class in which you can feed the stock name.
If the user types in a bad stock name, you can retrieve a list of possible names using the input as the company name.
Greets.
Maybe there is a SOAP service out there somewhere.

Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizon

Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizonstore they will upgrade your data plan to cover the overage and credit the upgrade. You will then have to remember to downgrade your plan or continue to pay for more data. Verizon, how would you feel if I walked into one of your stores and started filling my pockets with merchandise? If cought can I just give the product back and say "oops, sorry"

Today, my FCC complaint hit the same person working on the BBB complaint. Jimmie has been very nice and seems willing to work with this problem. We have been able to come to an agreement. I paid the purchase price for the phone and he returned my upgrade and unlimited data plan. This is what would have occurred if Verizon had given me correct information to begin with. I am happy with this result. He also brought quite a few instances concerning the handling of my transfer and upgrade that did not follow proper procedure. I am also confident that I would not have resolved this without complaining to BBB and or FCC. Verizon had no interest in solving the problem nor did they show any propensity to keeping a 20 year client. Even though this last CSR was very polite and helpful, his sole job is to respond to formal Federal and State complaints. He is required by law to address every complaint and report the reporting agency the agreed upon results - good or bad. Again, I suggest - If you are not getting the proper customer service, complain to someone outside of Verizon. Jimmie had not received any complaints registered with Verizon directly and I still have not had any contact with any other management representative that I was told would call.

Using LabVIEW 6.1 to Collect Data from FieldPoint Modules

I’m just starting off and am stumbling at the first hurdle. How to I collect data from fieldpoint in Lab View 6.1 (yes I no its old)
Thanks

Basically, the process is very simple. You first define the channels you want to measure in either FieldPoint Explorer or MAX. Which tool you use depends on how old the drivers are that you are using. Originally there was a seperate program for configuring FP but they eventually rolled it into MAX. In any case once you have the channels defined (and named) yu simply use the FP VIs to read the channels, refering to them by name.
One warning about the original FieldPoint: It is not an industrial product in any sense of the word. The system is very, very sensitive to heat, shock and vibration.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Read data from Excel and write into oracle database

Hi
I want to know how can i read data from excel and write into oracle database using java.Kindly help me out to find a solution.
Thanks and Regards
Neeta

Hai,
I am suggesting the solution.
I will try out and let u know soon.
Make a coma separated file from your excel file.
Assuming that your requirement allows to make a csv file.
This file may be passed as an file object to be read by java.Using JDBC you must be able to populate the data base.You can also use String Tokenizer if needed.
You do not want to go via sql Loader?
For reading the excel file itself do you want java?

How to - Extract data from Cloud For Customer into SAP HANA system

Hello Community,
I have a requirement for extracting the existing data from Cloud for Customer into separate SAP HANA Box.
Is it possible to achieve the same ? If yes, Please guide me for the same.
Awaiting quick response.
Regards
Kumar

Hi Kumar,
In addition to what Thierry mentioned you could also use the C4C integration via standard Operational Data Provisioning (ODP) interfaces. This integration was acutally built for SAP BW and allows you to access any C4C data sources. From my perspective you can also build upon that for a native SAP HANA integration. Please also have a look at this guide: How To... load SAP Business Suite data into SAP... | SAP HANA.
Besides that question let me also add the following: SAP Cloud for Customer already runs on SAP HANA since Nov. 2013. You may also use the powerful built-in analytics within C4C for analyzing data and any of your reporting demands. If your report should consider external data as well, you can combined the existing C4C data source with an external, so-called Cloud Data Source. More infomation is published in the C4C Analytics Guide: http://help.sap.com/saphelp_sapcloudforcustomer/en/PDF/EN-3.pdf.
I hope this helps...
Best regards,
Sven

ORA-28522 error when reading data from DB2 via hsodbc

Hi All,
I'm trying to connect to a DB2 database running on an AS/400 system, via Oracle HS.
I'm using Oracle 9.2.08. The DB2 version is V4R5.
My ODBC DSN is called TEST_odbc.
The initTEST_sid.ora file contains the following:
HS_FDS_CONNECT_INFO = TEST_odbc
My Listener.ora file contains the following:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = vm-dashboarddemo)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM = hsodbc)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = TEST_sid)
My TNSNames.ora file contains:
TEST_name =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = VM-DASHBOARDDEMO)(PORT = 1521))
(CONNECT_DATA =
(SID = TEST_sid)
(HS = OK)
When I use TNSPing, I get a successful result:
D:\oracle\ora92\bin>tnsping TEST_name
TNS Ping Utility for 32-bit Windows: Version 9.2.0.8.0 - Production on 04-JUL-20
07 13:46:47
Copyright (c) 1997, 2006, Oracle Corporation. All rights reserved.
Used parameter files:
D:\oracle\ora92\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = VM-DASHBOARDDEMO)(PORT = 1521))) (CONNECT_DATA = (SID = TEST_sid)) (HS =
OK))
OK (10 msec)
I can then login to SQLPlus as SYSDBA, and create a database link:
SQL> create database link TEST_link connect to "<username>" identified by "<password>" using 'TEST_name';
Database link created.
So far everything seems to be going well.
But then, when I try and select some data from the linked database, i get the following:
SQL> select * from <tablename>@TEST_link;
select * from <tablename>@TEST_link
ERROR at line 1:
ORA-00942: table or view does not exist
[Generic Connectivity Using ODBC][IBM][Client Access Express ODBC Driver
(32-bit)][DB2/400 SQL]SQL0204 - ZASTSE00 in QGPL type *FILE not found. (SQL
State: S0002; SQL Code: -204)
ORA-02063: preceding 2 lines from TEST_LINK
Does anyone have any ideas? I'd love to get this solved!!
Many Many Thanks,
River

I should have mentioned that I know that the table exists in the database.
The main reason I'm trying to do this is because I'm trying to get the data from the DB2 DB into my Oracle DB. I have been trying the EXP utility, which gives me a different error code:
D:\oracle\ora92\bin>exp <username>/<password>@TEST_name file=TEST.dmp rows=yes indexes=no
Export: Release 9.2.0.8.0 - Production on Wed Jul 4 13:44:06 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
EXP-00056: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
Username: <username>
Password:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
Note: indexes on tables will not be exported
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user <username>
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user <username>
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
Thanks Again,
Riv

SPD 2010 Workflow "Collect Data From User" activity + Multi User selection

Creating a SPD 2010 workflow. Trying to do something that I think should be simple.
Use a “Collect Data From a User” activity to collect 0 to many “people” that should be affiliated with a piece of content (Discussion).
After the assigned user completes the task (and after ensuring that there have actually been people associated from the task) I want to take the “people” from the Task list item and move them over to a field on the core Discussion item,
that is also setup as a Person/Group field (allowing multiple).
I have tried using both the “Set Field in Current Item” and “Update List Item” activities to map the data over (pulling from the Task item) and in both cases tried using every combination of “Return field as”
values to do the mapping (i.e. ‘String’, ‘Display Names, Semicolon Delimited’, ‘User Ids, Semicolon Delimited’, etc). In some cases I get vague errors about not being able to do mapping (I get it), in others, it sets the
data, but only to the first user entered in the Task’s instance of the field.
After researching a bit, I find that the task from which I am pulling the data only contains one value, eventhough when I submitted the InfoPath form for the task, it accepted my data entry of two
different users. So I think somewhere between the data entry into the custom task's infopath form, and the update of the same data field in the Task list, the value is being lost.
I am sure this would be trivial with a custom activity, but we are exploring OOB ways of doing things and I have to imagine this is possible.
Am I missing something here? This seems “buggy”…
I am able to repro this in two different environments, using an out-of-box Discussion Board on an out-of-box Team Site. If it matters Claims Based Auth against Windows only...
TIA!
Brian McCullough

Hi brianpmccullough,
Collect Data from a user action can only use to collect data from one user, and if you need to collect data from one than one user, please use “Assign
a Form to a Group” instead, then it will create separate task for each user.
And if we need to update a user and group field which with multiple selections enabled, we can only use lookup field to get only the one user. And
to add multiple users to this field, we can only use String Builder, type the user account directly or get information from multiple fields.
Best regards
Emir Liu
TechNet Community Support

Collect data from User workflow error updating list item

Hi, can someone please help me with WSS 3 workflows?!
I'll keep it simple - I have a workflow step "Collect data from user" that will fail with Unknown Error when attempting to update list item (this is after the user has clicked Complete Task). The workflow does not continue past this step and I have
to terminate the workflow.
What is odd, is that if I do another Collect data from User in the same step but following the 1st collect, both will work!! How can this be?? This proves the 1st collect is OK so why won't it run without another Collect data after it?! Doesn't make sense to
me.
I was just trying the second Collect to troubleshoot the issue. I've tried other actions there but having another Collect does seem to be the action that kicks things into life. Is there a clue here?
Any clues would be much appreciated as I'm not able to turn much up when I Google.
Thanks

Well, surprise, surprise, this has come back (thought it might!). The trace logs show it's a task locked error but I can't see how. Can anyone please provide me with some clues??
03/14/2014 12:30:25.11    w3wp.exe (0x7698)                          0x5EA4   Windows SharePoint
Services     Web Controls                     88wy   Medium     SPDataSourceView.ExecuteSelect()
- selectArguments: IsEmpty=True, MaximumRows=0, RetrieveTotalRowCount=False, SortExpression=, StartRowIndex=0, TotalRowCount=-1
03/14/2014 12:30:28.39    w3wp.exe (0x7698)                          0x6C4C   Windows SharePoint Services
    Web Controls                     88wy   Medium     SPDataSourceView.ExecuteSelect() - selectArguments:
IsEmpty=True, MaximumRows=0, RetrieveTotalRowCount=False, SortExpression=, StartRowIndex=0, TotalRowCount=-1
03/14/2014 12:30:28.47    w3wp.exe (0x7698)                          0x6C4C   Windows SharePoint Services
    Web Controls                     88wy   Medium     SPDataSourceView.ExecuteSelect() - selectArguments:
IsEmpty=True, MaximumRows=0, RetrieveTotalRowCount=False, SortExpression=, StartRowIndex=0, TotalRowCount=-1
03/14/2014 12:30:29.86    w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          72er   Medium     Microsoft.SharePoint.SPException: This task is currently locked by a running workflow and cannot
be edited.     at Microsoft.SharePoint.SPListItem.PrepareItemForUpdate(Guid newGuidOnAdd, SPWeb web, Boolean bMigration, Boolean& bAdd, Boolean& bPublish, Object& objAttachmentNames, Object& objAttachmentContents, Int32&
parentFolderId)     at Microsoft.SharePoint.SPListItem.UpdateInternal(Boolean bSystem, Boolean bPreserveItemVersion, Guid newGuidOnAdd, Boolean bMigration, Boolean bPublish, Boolean bNoVersion, Boolean bCheckOut, Boolean bCheckin, Boolean
suppressAfterEvents)     at Microsoft.SharePoint.SPListItem.Update()     at Microsoft.SharePoint.Workflow.SPWinOEWSSService.CommitUpdateListItem(Transaction txn, Object[] transData)
03/14/2014 12:30:29.86    w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          72fe   High       Error in commiting pending workflow batch items: Microsoft.SharePoint.SPException: This
task is currently locked by a running workflow and cannot be edited.     at Microsoft.SharePoint.SPListItem.PrepareItemForUpdate(Guid newGuidOnAdd, SPWeb web, Boolean bMigration, Boolean& bAdd, Boolean& bPublish, Object& objAttachmentNames,
Object& objAttachmentContents, Int32& parentFolderId)     at Microsoft.SharePoint.SPListItem.UpdateInternal(Boolean bSystem, Boolean bPreserveItemVersion, Guid newGuidOnAdd, Boolean bMigration, Boolean bPublish, Boolean bNoVersion,
Boolean bCheckOut, Boolean bCheckin, Boolean suppressAfterEvents)     at Microsoft.SharePoint.SPListItem.Update()     at Microsoft.SharePoint.Workflow.SPWinOEWSSService.CommitUpdateListItem(Transaction txn, Object[]
transData)     at Micro...
03/14/2014 12:30:29.86*   w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          72fe   High       ...soft.SharePoint.Workflow.SPPendingWork.PerformWorkNow(Transaction txn)
at Microsoft.SharePoint.Workflow.SPPendingWorkBatch.Commit(Transaction transaction, ICollection items)
03/14/2014 12:30:30.05    w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          88xr   Unexpected   WinWF Internal Error, terminating workflow Id# 2dc6002d-9f9d-474f-84cf-329025347ec5
03/14/2014 12:30:30.05    w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          98d4   Unexpected   System.Workflow.Runtime.Hosting.PersistenceException: This task is currently locked by a running workflow
and cannot be edited. ---> Microsoft.SharePoint.SPException: This task is currently locked by a running workflow and cannot be edited.     at Microsoft.SharePoint.SPListItem.PrepareItemForUpdate(Guid newGuidOnAdd, SPWeb web, Boolean
bMigration, Boolean& bAdd, Boolean& bPublish, Object& objAttachmentNames, Object& objAttachmentContents, Int32& parentFolderId)     at Microsoft.SharePoint.SPListItem.UpdateInternal(Boolean bSystem, Boolean bPreserveItemVersion,
Guid newGuidOnAdd, Boolean bMigration, Boolean bPublish, Boolean bNoVersion, Boolean bCheckOut, Boolean bCheckin, Boolean suppressAfterEvents)     at Microsoft.SharePoint.SPListItem.Update()     at Microsoft.SharePoint.Workflow.SPWi...
03/14/2014 12:30:30.05*   w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          98d4   Unexpected   ...nOEWSSService.CommitUpdateListItem(Transaction txn, Object[] transData)     at
Microsoft.SharePoint.Workflow.SPPendingWork.PerformWorkNow(Transaction txn)     at Microsoft.SharePoint.Workflow.SPPendingWorkBatch.Commit(Transaction transaction, ICollection items)     at System.Workflow.Runtime.WorkBatch.PendingWorkCollection.Commit(Transaction
transaction)     at System.Workflow.Runtime.WorkBatch.Commit(Transaction transaction)     at System.Workflow.Runtime.Hosting.WorkflowCommitWorkBatchService.CommitWorkBatch(CommitWorkBatchCallback commitWorkBatchCallback)
at System.Workflow.Runtime.Hosting.DefaultWorkflowCommitWorkBatchService.CommitWorkBatch(CommitWorkBatchCallback commitWorkBatchCallback)     at System.Workflow.Runtime.WorkflowExecutor.CommitTransaction(Activity activityContext)
03/14/2014 12:30:30.05*   w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          98d4   Unexpected   ...   at System.Workflow.Runtime.WorkflowExecutor.Persist(Activity dynamicActivity, Boolean
unlock, Boolean needsCompensation)     --- End of inner exception stack trace ---     at System.Workflow.Runtime.WorkflowExecutor.Persist(Activity dynamicActivity, Boolean unlock, Boolean needsCompensation)
at System.Workflow.Runtime.WorkflowExecutor.System.Workflow.ComponentModel.IWorkflowCoreRuntime.PersistInstanceState(Activity activity)     at System.Workflow.ComponentModel.Activity.MarkClosed()     at System.Workflow.ComponentModel.Activity.ReleaseLockOnStatusChange(IActivityEventListener`1
eventListener)     at System.Workflow.ComponentModel.FaultAndCancellationHandlingFilter.SafeReleaseLockOnStatusChange(ActivityExecutionContext context)     at System.Workflow.ComponentModel.FaultAndCancella...
03/14/2014 12:30:30.05*   w3wp.exe (0x7698)                          0x7A94   Windows SharePoint Services
    Workflow Infrastructure          98d4   Unexpected   ...tionHandlingFilter.OnEvent(Object sender, ActivityExecutionStatusChangedEventArgs e)
at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)     at System.Workflow.Runtime.Scheduler.Run()
03/14/2014 12:30:30.38    w3wp.exe (0x7698)                          0x6C9C   Windows SharePoint Services
    General                          0   Unexpected   ERROR: request not found
in the TrackedRequests. We might be creating and closing webs on different threads. ThreadId = 59, Free call stack =    at Microsoft.SharePoint.SPRequestManager.Release(SPRequest request)     at Microsoft.SharePoint.SPWeb.Invalidate()
at Microsoft.SharePoint.SPWeb.Close()     at Microsoft.SharePoint.SPSite.Close()     at Microsoft.SharePoint.SPSite.Dispose()     at Microsoft.SharePoint.Workflow.SPWorkflowManager.RunWorkflow(SPWorkflow
workflow, Collection`1 events, SPRunWorkflowOptions runOptions)     at Microsoft.SharePoint.Workflow.SPWorkflowManager.RunWorkflow(SPWorkflow workflow, Collection`1 events)     at Microsoft.SharePoint.Workflow.SPWinOEItemEventReceiver.RouteWorkflowEvent(SPItemEventProperties
properties, SPWeb web, SPListItem item, Boolean fNeedTas...
03/14/2014 12:30:30.38*   w3wp.exe (0x7698)                          0x6C9C   Windows SharePoint Services
    General                          0   Unexpected   ...kReset)
at Microsoft.SharePoint.Workflow.SPWinOEItemEventReceiver.ItemUpdated(SPItemEventProperties properties)     at Microsoft.SharePoint.SPEventManager.RunItemEventReceiver(SPItemEventReceiver receiver, SPItemEventProperties properties, SPEventContext
context, String receiverData)     at Microsoft.SharePoint.SPEventManager.RunItemEventReceiverHelper(Object receiver, Object properties, SPEventContext context, String receiverData)     at Microsoft.SharePoint.SPEventManager.<>c__DisplayClass8`1.<InvokeEventReceivers>b__0()
at Microsoft.SharePoint.SPSecurity.CodeToRunElevatedWrapper(Object state)     at Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken userToken, Boolean bResetContext, WaitCallback code, Object param)     at Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken
03/14/2014 12:30:30.38*   w3wp.exe (0x7698)                          0x6C9C   Windows SharePoint Services
    General                          0   Unexpected   ...userToken, CodeToRunElevated
code)     at Microsoft.SharePoint.SPEventManager.InvokeEventReceivers[ReceiverType](SPUserToken userToken, RunEventReceiver runEventReceiver, Object receivers, Object properties, Boolean checkCancel)     at Microsoft.SharePoint.SPEventManager.InvokeEventReceivers[ReceiverType](Byte[]
userTokenBytes, RunEventReceiver runEventReceiver, Object receivers, Object properties, Boolean checkCancel)     at Microsoft.SharePoint.SPEventManager.HandleEventCallback[ReceiverType,PropertiesType](Object callbackData)
at Microsoft.SharePoint.Utilities.SPThreadPool.WaitCallbackWrapper(Object state)     at System.Threading.ExecutionContext.runTryCode(Object userData)     at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode
code, CleanupCo...
03/14/2014 12:30:30.38*   w3wp.exe (0x7698)                          0x6C9C   Windows SharePoint Services
    General                          0   Unexpected   ...de backoutCode, Object
userData)     at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)     at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback
tpWaitCallBack)     at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state) , Allocation call stack (if present) null

Collect cdr from cisco gateway AS5300 into a database in realtime

Hello !!
somebody knows how can i collect cdr from cisco gateway AS5300 into a database in realtime?
Regards

You can use gw-accounting as explained below:
gw-accounting
To enable an accounting method for collecting call detail records (CDRs), use the gw-accounting command in global configuration mode. To disable an accounting method, use the no form of this command.
gw-accounting {aaa | file | syslog [stats] }
no gw-accounting {aaa | file | syslog [stats] }
gw-accounting {h323 [vsa] | syslog | voip}
no gw-accounting {h323 [vsa] | syslog | voip}
Syntax Description
aaa
Enables accounting through the AAA system and sends call detail records to the RADIUS server in the form of vendor-specific attributes (VSAs).
file
Enables the file accounting method to store call detail records in .csv format.
syslog
Enables the system logging facility to output accounting information in the form of a system log message.
stats
(Optional) Enables voice quality statistics to be sent to the system log.
h323
Enables standard H.323 accounting using Internet Engineering Task Force (IETF) RADIUS attributes.
vsa
(Optional) Enables H.323 accounting using RADIUS VSAs.
voip
Enables generic gateway-specific accounting.
You can find more info in cisco IOS voice command reference guide.
This is an example to collect CDR of H.323 calls via RADIUS:
gw-accounting syslog
gw-accounting aaa
attribute acct-session-id overloaded
attribute h323-remote-id resolved
acct-template callhistory-detail
Regards.

How to select the data from a Maintainance View into an internal table

Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.

HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban

How to extract data from xml and insert into Oracle table

Hi,
I have a large xml file. which will have hundreds of the following transaction tags having column names and there values.
There is a table one of the schema with coulums "actualCostRate","billRate"....etc.
I need to extract the values of these columns and insert into the table
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuUK" chargeCode="LCOCD1" externalID="L-RESCODE_UK1-PROJ_UK_CNT_GBP-37289-8" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-12" transactionType="L" units="11" taskID="5017601" inputTypeCode="SALES" groupId="123" voucherNumber="ABCVDD" transactionClass="ABCD"/>
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuEU" chargeCode="LCOCD1" externalID="L-RESCODE_US1-PROJ_EU_STD2-37291-4" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-04" transactionType="L" units="4" taskID="5017601" inputTypeCode="SALES" groupId="124" voucherNumber="EEE222" transactionClass="DEFG"/>

Re: Insert from XML to relational table
http://www.google.ae/search?hl=ar&q=extract+data+from+xml+and+insert+into+Oracle+table+&btnG=%D8%A8%D8%AD%D8%AB+Google&meta=

Collecting data from register via MODBUS into array

Similar Messages

Maybe you are looking for