Collective document created in Depreciation Posting: SAP ECC 6.0

Hi experts,
We just migrated from version R/3 4.6C to SAP ECC 6.0.
In version 4.6C, when executing Depreciation Run the system created several accounting documents (one per every cost center).  In new version SAP ECC 6.0, the system creates just one collective accounting document including all cost centers (in this way the document has a lot of lines).
Is there any possibility to change this setting, so the system creates several accounting documents as in version 4.6C?
We have this requirement for accounting porpouses.
Thanks a lot for your help,

I got response from OSS message:
Either of these notes solve the problem:
<<< 0000888696  Unexpected Venture Splitting on Depreciation Postings >>> or
<<< 0001091477  RAPOST2000 creates docs with unexpected huge number of lines >>>

Similar Messages

  • Create Substitute Users in SAP ECC 6.0

    Dear Gurus,
    Can someone guide on how to create a temporary user Substitute User) in SAP ECC 6.0. This is a user who will only use the SAP system for a short period while the substantive user is away on leave such that the system should lock the substitute user automatically when the leave preiod expires.
    regards,
    Chansa

    > Very valid points on the PID's etc - hadn't thought of those!.
    A lot of things are easily overlooked when designing substitution or emergency user procedures.
    > Seems that, if the covering user doesn't have the authorisations in their UMR and has to fall back on the reference user's roles, it shows the reference user ID instead.
    This would be very application specific and is not "mainstream". Where you can use it is with WAPIs (Workflow Application Program Interfaces) and BatchInput has been much the same for decades already.
    > I'm not really sure if there''s a way around this as it may cause some questions internally but may benefit the business as the supplier/vendor etc think they are still dealing with their original contact.
    On the backend you still have the created by and posted by fields for many application documents (all else being the same - which I would not rely on...).
    > For small user groups, when one person is covering for another absent user in their user group then there shouldn't be any increased SoD figures (as long as reporting on org levels hasn't been activated in RAR) but we have found many instances where the covering user is either a team leader or similar which tends to increase SoD.
    This is often because the user ID is changed (to a service user) when entering the "special mode". So access other user's (namely back to your own)  spools, jobs, variants, layouts, work items, queries, office messages, etc etc is needed, and these are generally protected by strong administrator authority-checks. These will in combination provide many SoD conflicts or usually over-riding system admin access which makes the application restriction pretty weak in comparison.
    > Pity it (SM20N) doesn't seem to work by user group but not bad at all...
    It does via naming conventions, but is backward compatible for those already logging SAP* user and expecting no entries, which would then become all users starting with the name SAP... See Rz11 param rsau/user_selection (default is "off").
    > Can't make the Berlin conference unfortunately but thank you for the welcome to SDN.
    You can keep an eye out for "SDN Hacker Lunch" in the news streams. After the event, I normally put the infos and discussions together into a blog on SDN.
    Cheers,
    Julius

  • SAP Businness connector 4.6 - post SAP ECC Unicode convertion

    Hi,
    after Unicode convertion of our ECC 6.0 system, SAP Bussiness connector create XML file with encoding UTF-16 (in the past was iso-8859-1). Our custom applictions, that read this .XML files, can't process this files with UTF.16 until we have manualy change from UTF-16 to UTF-8 or iso-8859-1
    Now:
    <?xml version="1.0" encoding="utf-16"?>
    In the past:
    <?xml version="1.0" encoding="iso-8859-1"?>
    Can I set into Businness Connector right encoding?
    Regards.

    Hi,
    >You can try to uncheck the Unicode settings in the RFC destination in SAP (transaction SM59) and see how the content arrives >then. But if I remember correctly, this does also not produce the desired effect in BC (receive in iso-8859-1).
    already try it without success.
    >Apart from that, I see no other option than change the encoding via a BC service or to change the encoding on the application >which receives the FTP file.
    OK.
    Regards.

  • MDM Business Partner 5.5 Not Creating Customer Master in SAP ECC

    Hi,
      I am importing Business Partner into ECC from MDM using XI with BP Business Content. This is done using proxy.
      The business partner is created sucessfully but the customer master table KNA1, KNB1 is not being populated.
       Does anyone experienced this before? Or has a solution for this?

    I am not creating customer in ECC. I am creating Business Partner,  this is because we are using IS-U which uses the BP instead of the Customer Master.
    So we are using the MDM BuPa to ABAP BuPa mapping.
    The thing about this is, when we run the transaction BP to create Business Partner, it automatically creates a mirror KNA1 record to match the business partner. But through MDM-XI proxy, it is not creating the record.

  • Error when run Depreciation Posting Run AFAB

    Hi,
    I found error when run Depreciation Posting Run for period 7 2007.
    FYI. I had run Unplanned Depreciation (TCode: ABAA) with document date 31.10.2007 and posting date 31.10.2007, trans. type 640. After that, i want to run Depreciation Posting Run (TCode: AFAB) with fiscal year: 2008, posting period: 7, reason for posting run: repeat. Select on Test Run. Then i found error message as below. 
    Error Message:
    Documents manually posted within dep.doc.number range
    Message no. AA728
    Diagnosis
    In the number range interval for the document type for posting depreciation, a document  has been posted which was not created within the framework of depreciation posting. The last document posted by depreciation posting was assigned the number .
    Procedure
    Contact your Systems Specialist. When changing the number range interval for the document type in depreciation posting, you have to specify a new interval in which no documents exist. Using organizational measures, you can guarantee that there are no documents apart from those created by depreciation posting in this number range.
    Can any one help how to solve this issue?

    Hi Paul,
    Now I go to TCode: FBN1 - Accounting Document Number Ranges, then i want to change the range for year 2008.
    No Year  From No          To No           Current No          Ext
    03  2001   0300000000   0399999999   -                          /
    03  2002   0300000000   0399999999   -                          /
    03  2003   0300000000   0399999999   -                          /
    03  2004   0300000000   0399999999   -                          /
    03  2005   0300000000   0399999999   -                          /
    03  2006   0300000000   0399999999   -                          /
    03  2007   0300000000   0399999999   -                          /
    03  2008   0300000000   0399999999   -                          /
    03  2009   0300000000   0399999999   -                          /
    Referring back to Asset Accounting, the Reference Document: 19.
    Do it mean that my FI doc. no is 0300000019 ? I bit confuse on this..
    Can you guide me more details on it?
    Thanks in advance.
    Edited by: Nur Aman Abdul Manap on Apr 15, 2009 2:09 AM

  • SAP ECC Service notification from CRM Complaint

    Hi,
    As there are some links and document are available to create the quality notification in SAP ECC from the CRM complaint, using action profile for this some setting also needed in SAP ECC QM, but as in ECC we already have the service notification (IW51) which is working fine, is there any option to create the service notification in SAP ECC instead of quality notification.
    Regards,
    Zafar

    Hi,
      In the notification type, insted of quality notification just maintain the service/PM notification type system will create the notification in SAP ECC.
    We also wanted some other details to be pass from CRM to ECC for that we have created a function module in SAP ECC which updates the notiifcation and then that function module need to be called in SAP CRM after the Create Notification FM in SAP CRM Action.
    Regards,
    Zafar

  • How to Call SAP ECC transactions into CRM IC Webclient Profile Screen

    Dear all,
    We are implementing IC Webclient application for our Clientu2019s call center operations.
    All sales related activities are being created in back end SAP ECC system like, starting from Quotation to Sales Order, Deliveries and Billing.
    Client wants to see all relevant ECC reports of Sales transactions in IC Webclient Screen.
    Connectivity between SAP CRM and ECC has already been established and we did all basic configuration for IC Webclient, but donu2019t know how to and where to call ECC transaction in IC Webclient Screen.
    I am looking for suggestions from any of you to handle this requirement successfully. I would be grateful if you send me any documentation which addresses this requirement.
    Your suggestions and help will be highly appreciated.
    Thank you,
    Raghu ram.

    Hi,
    Step-by-step process for the same is as follows:
    1. Create a launch transaction to launch the relevant BOR object at the following
    IMG->CRM->IC WebClient->Basic Functions->Transaction launcher -> Configure Transaction Launcher (Wizard).
    This wizard is very useful and easy way to create a launch transaction and guides through each step and generates a handler class for you.
    2. This transaction now has to be incorporated in the Navigation bar. For this you have to create navigation bar entry and navigation bar profile.
    IMG-> CRM-> IC WebClient->Basic Functions -> Define Navigation Bar Profiles
    Here you have to first Define Entries where you would input Launch transaction ID created in step 1 and then Define the Navigation Bar Profile.
    3. Assign the Navigation bar profile to IC WebClient profile.
    Please note that you can you Transaction launcher for incorporating any web links, PCUI Transactions, CRM Transactions, ERP transactions etc.
    Regards,
    Deepak

  • Getting Data from SAP ECC & BI to Crystal Reports and then Broadcasting.

    Hi,
    I need to get the data from SAP ECC & BI to Crystal reports and then after formating data in Crystal reports, my requierment is to send via email (Broadcasting). Is there any option to  Broadcast from Crystal reports?
    I read Ingo Hilgefort blogs, but I need in detail steps such as to verify Integration Kit is installed or not and also how to create connections in between SAP ECC and Crystal. What are the Security setups(User IDs and Authorizations) involved?
    What is best option for email/broadcasting for Crystal Reports?
    Your help is appreciated.
    Thanks.
    SVK.

    Hi,
    I would suggest you then start with the installation and user guide fr the SAP Integration Kit.
    Ingo

  • Master Data in SAP SRM and SAP ECC

    Hi all,
    I have the following question: after I create a vendor in SAP ECC and, than, I replicate it in SAP SRM (through transaction BBPGETVD):
    1. if I modify all field of vendor on SAP ECC, is there an   
       authomatic way which update vendor data on SAP SRM, or  
       it is possible only through BBPUPDVD transaction?
    2. if I modify all field of vendor on SAP SRM, is there an   
       authomatic way which update vendor data on SAP ECC, or is it possible through some transaction?If yes, what is it?

    Hi Maria,
    You can execute BBP_VENDOR_GET_UPDATE_JOB report using SA38 txn. to automatically replicate vendors from R/3 to SRM.
    Schedule a back ground job for this report depending upon the frequency of update that is every day or every hour based on your requirement.
    The report BBP_VENDOR_SYNC automatically synchronizes the backend vendors with the SRM system.
    Make the Global settings for vendor replication and synchronization in SPRO
    SPRO -- > IMG ---> Supplier Relationship Management --> SRM Server -->Technical Basic Settings -->Settings for Vendor Synchronization --> Make Global Settings
    There is no automatic way for updating vendors in R/3 after making changes in SRM.
    Hope this makes you more clear. Clarifications are welcome.
    Award points for helpful answers.
    Rgds,
    Teja

  • 3rd Party Remittance Posting Error - No Posting Document Created (ECC 6.0)

    Hello Everyone,
    When running 3rd Party Remittance process, the system does not create a posting document to be released/posted in PCP0.  In PCP0, Run Type:  TP -posting thrid-party remittance does not exist.  Also, the T51R* tables are not updating properly as well when I execute the 3rd party processes.
    I've compared configuration from the old to the new system and it appears to be okay.  I need some assistance to figure out this issue.  Can someone give some advice on how to resolve my issue.
    Fyi...we run the following processes:
    PC00_M99_U500 - Evaluation Run
    PC00_M10_URMU- Store Evaluation Run
    PC00_M99_URMUP- Create Posting Run
    PCP0 - Process Posting Run
    Since we are not using the new Evaluation Run program(PC00_M99_URME), do we need to deactivate it to use the old evaluation run (PC00_M99_U500)? 
    Your advice will be greatly appreciated.
    Brenda Goodwin
    IT System Analyst
    Roche Diagnostics Operations, Inc

    Naveen,
    Thank you for your suggestion.  My configuration was correct.  The issue was a system issue in which was forwarded to SAP for immediate attention.  To correct my issue, I had to apply SAP Note 1039104 - GEN:  No Posting run number for 3PR posting run (RPURMP00).
    Kind Regards,
    Brenda Goodwin

  • How to run Depreciation in SAP system when manual posting has been made

    Hi
    My client is posting the dep thro' manual entry every quater from 2003 FY onwards.But untill 2002 they were posting the dep in SAP,due to some issue they started to post the dep manually  and now they want to run the dep in SAP system.
    I am new to AA and i am confused and don't know how to proceed  further.
    If i run the dep  from 2003 period 1,then what will be impact of the same  and the FI books has beem closed but the AA year is still open.
    I though of going like....
    I will retire all the asset as on 31.03.02 without revenue and  purchase the same assets in the current fiscal year (2007) as a in house manufacturing  with the current  book value.
    I don't whether i am correct or wrong, if i am correct/wrong  kindly guide me and the area or implication that i have to take care while  performing the above activity... or any other way/suggestion thro' which i can bring the dep in the system thro' standard way...
    We are in 4.6c version.
    regards
    Praveen

    hi Praveen,
    my advice was to reverse the newly created depreciation posting, not the ones which were created throughout the years periodically.
    if you run the depreciation now and post all values to today, than you have to do the reverse posting today. They should be exactly the same day! If you do the depreciation post for a day in the past, that means (at least for me), that you are allowed to post to that day (both legally and 'SAPally' , and in this case you have create (and you should be able to do so) the reverse posting for that day.
    Come back if you need more clarifications
    ec

  • Show SAP ECC document in CE

    Hi experts,
    In CE portal I want to show/update/create document from SAP ECC. In ECC I can use CV01, CV02 or CV03.
    Can you tell me how I can do it in CE Portal.
    Are there some tools that I can reuse?
    Thank you in advance for your help.
    KR
    Francois

    Any Idea?
    I am new in composition environment, can you give me general information about how to do this?
    Thank you in advance.
    Edited by: François BECKER on Mar 23, 2011 2:46 PM

  • SAP MDM == PI== SAP ECC, IDOC posting

    Hi,
    We are integrating SAP ECC 6.0 with SAp MDM 7.1 SP04 using PI 7.1 as a interface. Scenario is SAP MDM ==>PI==> SAp ECC. I would be creating record in ECC and will be posted in SAp ECC through PI. We will be creating Basic Data (MARA), Plant level data (MARC), Sales Level data (MVKE), and Valuation level Data (MBEW) in MDM.  IDOC used is MATMAS05.
    Plant level data (MARC) will activate various views in Material master like Purchasing, Sales plant general data, MRP views and accounting views...right
    I donu2019t want to activate MRP view but need plant level data i.e. Plant and profit center to populate in MARC table. Means same Material Type but some Materials donu2019t have MRP view activated and some may have alongwith other plant related views.
    I tried creating record without passing MRP related fields but still IDOC failed saying MRP type is mandatory. (Which means it is activating MRP view)
    Do we have separate IDOC for MDM integration?? Do I need to enhance IDOC??
    Warm regards,
    Rc
    NOTE - This is possible while manual creation as will as through BAPI.

    Hi,
    Have you checked MDM71_Material_Content.pdf page no 20.
    3.3.2 Business Scenario: MDM710_Outbound.
    You also need MDM PI content to install and run this Scenario..
    Hope it helps if you go through MDM71_Material_Content.pdf
    As you said, I tried creating record without passing MRP related fields but still IDOC failed saying MRP type is mandatory
    Try  passing  any constant through PI Message Mapping to inbound IDOC (Receiving System, ECC)
    Thanks and Regards,
    Mandeep Saini

  • SO number as reference  in accounting document  created when posting GI

    Hello,
    In the header of accounting document, which is being created after posting goods issue, in the "Reference doc." field delivery number is displayed.
    Is it possible to have in this field sales order number?? If so, where can I change this set up?
    Regards,
    Sylwia

    Thank you for your advice.
    I chcecked the VTFL and I can only see that in this transaction you can do this kind of settings and change the reference field but in accounting document which is created after posting a billing document (and I would like to change it for accounting document created after posting GI when the billing doc. does not exist yet)

  • Posting to Accounting- No document created

    Hi Experts,
    When i am running the PC00_m99_cipe transaction then i am getting a msg....."no document created" .
    plz help
    regards
    Kunal

    Hi,
    Have u run the posting run in simulation mode?? for doc. to be created u will have to run it in live mode"P". simulation is only to see if there r no errors.
    Regards,
    Atul

Maybe you are looking for