Collition detection help

hey, everyone.
This is the problem im dealing with now. I have a movie clip
(dropper) which creates movie clips (bomb) that follow the code.
The depth of the (bomb) is set at ++
The problem is, is that I have another element (catcher) that
needs to detect the colision between it and (bomb). I believe the
problem is that (bomb) is perpetually above (catcher) and therefor
will not interact with it. If this is the case, I believe the
solution is to keep the (catcher) always on the highest level above
the (bomb)s so that they collide. If this is the case, what would
be the actionscript, and where would I put it? If not, what do I
need to do?
Thank you all very much for taking a look-see.

"FalinMorDR553" <[email protected]> wrote in
message news:e571t8$hm1$[email protected]..
> hey, everyone.
>
> This is the problem im dealing with now. I have a movie
clip (dropper) which
> creates movie clips (bomb) that follow the code. The
depth of the (bomb) is set
> at ++
>
> The problem is, is that I have another element (catcher)
that needs to detect
> the colision between it and (bomb). I believe the
problem is that (bomb) is
> perpetually above (catcher) and therefor will not
interact with it. If this is
> the case, I believe the solution is to keep the
(catcher) always on the highest
> level above the (bomb)s so that they collide. If this is
the case, what would
> be the actionscript, and where would I put it? If not,
what do I need to do?
>
> Thank you all very much for taking a look-see.
Depths don't affect collision detection. I tested your code
with a simple test and it works fine..
http://www.kompanionkare.net/flash/bomber/bomb.html
Must be some other problem with your setup.
tralfaz

Similar Messages

  • Ipod touch wont turn on and itunes wont detect.HELP!!!!

    Can anyone please help me after updated my ipod touch 8gb 1st or 2nd gen cant remember. when i plug it into my laptop, itunes pops up as normal and it says waiting for ipod then the ipod turns on no logo just a blank black screen but its on, after about 2/3 mins it turns off and then in itunes it says. itunes detects an ipod but cant identify it with error code (1602). it also has done the exact same thing but with a white blank screen. i have tried to hard reset by pressing the home button and the power button at the same time i have tried it while its been fully off with the white screen and with the black screen(but switched on) absolutely nothing. i have aslo tried dfu mode in all of them situations i named but still nothing. i have aslo tried to re install the driver manually by navigating to usbappl but i get the error  windows found driver software for your device but encountered an error while attempting to install it and underneath that it says the device can not start(10) i have ran out of ideas and can not find anything else online the ipod is absolutely not jailbroken and was working perfectly fine before the update.

    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Check for outdated or modified software

  • My network adapter is not being detected HELP!

    Ok here's the deal. My computer isn't amazing but it gets me by however two days ago I went to use it and I couldn't connect to the internet. I check the drivers and the device manager and found out that it isn't even detecting that I have a wireless card... I don't know what I can do but Im really hoping I can fix this on my own without having to buy a new card. I called HP and they are stupid and asked me the same questions 3 times and then told me it'd be $298 to fix it. Please help!
    Solved!
    Go to Solution.

    Simplest thing would be to have your local Geek Squad check it out and see if the wireless card is bad. If so, the card plus labor would be about $75 or so before tax.
    Adam
    Best Buy Community - Retail, Americas
    Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
    *Remember to mark your questions solved and click the star under the user's name to show your thanks!

  • PHOTOSMART C4580 'CARTRIDGES MISSING OR NOT DETECTED' HELP!!

    i keep getting CARTRIDGES MISSING OR NOT DETECTED' error message on my photosmart c4580. i have taken out and re set the cartridges, also cleaned them and the printer contacts lovingly with a cotton swab just like the online help advised and i still get the error message. i dont want to buy new cartridges until i definitely know they are empty (i dont really think they are). can anyone help?? thanks
    This question was solved.
    View Solution.

    Hi - Wish I had better news, but since you've already cleaned both the cartridge and carriage contacts, I'm not aware of anything else you can do, but replace the cartridges.
    Sorry about that.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • "Devices" does NOT appear in itunes and my itouch cannot be detected, help?

    For some unknown reason my itouch just quit syncing with itunes. I bought a new sync cord to no avail. I removed itunes from my laptop as directed and reinstalled. No change. In fact, itunes help, directs to reinstall the device only there is no "Devices" option anywhere in itunes. Under "File" and "Sync ipod" all of those options are grayed out. What must be done to fix this problem?

    I'm having the same issues. my ipod Touch does not show as a device in itunes on my Mac nor my PC. I have successfully synced my touch on the PC before, but not itunes doesn't show it ! help !
    I've updated latest version of itunes on my PC. Can't update to itunes 10 on Mac because of OS I have.
    Robin

  • Fax Detect help, PLEASE! :)

    I'm looking to configure fax detect on the UC 520.
    I can get listen-first to work for faxes only. After 9 seconds, or when I press any key...the call is disconnected.
    If I confgure it for connect-first, the line just rings... never answers.
    Config is attached.
    PLEASE let me know what's missing ... I had this working a while back, and I don't remember what I needed to do.
    I've also tried
    app_fax_detect.2.1.2.2.tcl and
    app_fax_detect.2.1.2.3.tcl
    Same issue.
    THANK YOU !!
    Greg

    Hey Gregory,
    I was looking at your configuration and found that app is applied on FXO port. Can you please send me following from the UC520
    show ver
    show run
    show flash
    Also I would like you to enable following debugs and make a test call
    debug voip ccap inout
    debug voip vtsp all
    debug vpm signal
    debug voip application all
    debug fax mta all
    Please make sure that you are collecting the debugs on buffer and not on console.
    Thanks,
    Malick

  • Simple collision detection - help needed

    ok, im having trouble with collision detection. i think i've
    got the first bit right (below) but i cant seem to complete the
    other behaviour which i plan on atteching to the sprite in channel
    73 to complete the collision detection.
    global gCollision
    on collisionDetect me
    if sprite(me.spriteNum).within(73) then
    go to frame "end"
    end if
    end
    thanks

    Try intersect function:
    if sprite i intersects j then put("You placed it correctly.")
    "P2Vulco" <[email protected]> wrote in
    message
    news:e2qa5r$l1i$[email protected]..
    > im trying to do this:
    >
    > when sprite 73 collides with sprite 14 then do something

  • IPOD NOT DETECTED HELP

    Hey Guys I Recently Updated from windows xp SP2 to WINDOWS 7 ULTIMATE AND NOW MY IPOD IS NOT DETECTED BY ITUNES BUT IT IS DETECTED BY THE COMPUTER TRIED REINSTALLING RESET AND RESTORE BUT IT DIDNT WORK STILL SAME PROBLEM THANK YOU

    iPod appears in Windows but not in iTunes

  • K8N Neo4 Platinum SATA2 HDD Not Detected HELP!

    I have built 3 identical rigs, the rigs are in my signature. the problem i am having is that the SATA2 hard drives are detected by the bios, i have them plugged in the purple slots sata1 and sata2, When the drives are plugged in there the system runs slow.  What happens is when i put the windows XP cd in to install it starts to boot from the cd and gives me the part "setup is detecting hardware on the black screen" then that goes away and i just get a black screen.  The same problem occurs on all 3 rigs.  The only way i can manage to get everything working and with windows installed is if i use the orange sata slots which are sata5 and sata6, but then i have to use it as raid.  Currently have them setup as raid0.  I was wondering if anyone knows a solution for the problem.  Running the drives on the orange slots doesnt use the 300MB/s  only runs them at 150MB/s.  The only thing i can think off is that we would need a BIOS update to correct the problem with the sata2 hard drives.  Seems to me like other people here are also having problems with sata2 hard drives.
    Any feedback or sugestions would be apreciated.

    gffreire,
    I am the person who started the tread you referenced.
    The Problem must everyone is having is with true SATA II drive the have 3 Gb/s speed and NCQ features.
    The fix for all of this takes two things, (1) BIOS V1.A and earlier have a problem and (2) all current nVidia RAID drivers posted, unless they have posted some thing new in the last day, that include 32-bit and 64-bit have also got problems.
    I have tested a new beta BIOS and Beta driver for 32-bit when used together, they work.  The new-posted BIOS V1.B appears to have the BIOS fix in it, but currently posted, RAID Drivers still have no fix incorporated in them.
    Send me your E-mail address by Personal Message and I will send you a copy of the Beta 32-bit drive.  So, if you upgrade to BIOS V1.B and are installing the beta driver, during clean install, it may solve your problem.   However, be remaindered this driver is pre-beta and also does not includes no “xxx.cat” file.  Effects on your system could be anything.  I have gotten it to run using a clean install on both of my MS-7125 MBs.
    Roger

  • User Interface - auto detect does not work

    I have added the jQuery Mobile User Interface with Theme 50 to an old APEX 4.1 Application.
    When adding the new User Interface i checked the "auto detect" feature in the old User Interface.
    "Auto detect"- Help says:
    Select whether the appropriate user interface should be automatically detected. If auto-detection is enabled, the user will be redirected to the corresponding login page or home page.
    When calling the Application (only with the application-id) from my nexus 4 smartphone the application does not switch to the mobile Login page.
    Do i have to change any old settings or themes?
    Thanks so far

    You can run Incremental Sync from user profile 3-4 times. This will delete the user profile from SharePoint UPA.
    Now, we need to run UPA clean job timer job available in Job Definition inside central administration.
    This is a by design issue which you have raised. But, to get it done on the same day you need to follow above mentioned steps. This would be done in some hour and cannot be achieved in 4-5 minutes. So, your original request is a by design issue and can be
    done i some hours.
    Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

  • Cannot detect my built in camera in Skype and ym

    i just recently bought a new mac book air 4rth gen. camera is ok when using photobooth and facetime but when running skype or ym camera could not be detected. help...

    For a workaround:
    https://discussions.apple.com/thread/5306216?tstart=0

  • No sensor detected?

    wenever i would start i workout i would select a playlist and it would never work it would say "no sensor detected"
    help??

    Laxmax: Your sensor might be asleep....check out this link
    http://docs.info.apple.com/article.html?artnum=303934#faq5

  • Premiere Elements 4.0 - cannot set DV capture Scene Detect

    New install / Premiere Elements 4.0 (Panasonic DV, firewire connection)
    Premiere Elements 4.0 - cannot set DV capture Scene Detect
    HELP Says: "select or deselect Scene Detect By Timecode or Scene Detect By Content in the Capture panel menu"
    DV Capture panel menu does not provide this option; instead a popup appears "DV Capture Preview Settings"
    trying to capture as single AVI file, no scene detect
    thanks, GARRY

    When you open Premiere Elements 4 and the Welcome Screen appears, click on "Capture Video". The Capture Window will appears. Look up to the top right of that Window (those tiny black arrows next to the X/close).
    Clicking on those tiny black arrows results in a drop down list which should include the options:
    Scene Detect by Timecode
    Scene Detect by Content
    I suspect that you are clicking on that camcorder icon just below those tiny black arrow.
    If I am wrong, please let us know.

  • Router Not Detected ....grrrr

    ok i have read many things on this site so here we go Router WRT54GS OS - windows xp Pro power light - ON WLAN - ON 1- on 2 - off (other pc is off (Using Wireless G USB -WUSB54GC) ISP Comcast ... internet still works.... (im on it now with router) During CD setup goes through all good untill ......."router Not Detected" Help?

    If you are already online with the router ...... i think no need to run the CD .... also you can tell me what are the different settings you want to use from the router setup ....
    Possibly i can help you further ....
    Message Edited by forsaken on 06-24-2008 12:43 PM

  • Face recognition and places

    wouldn’t be nice if also aperture could do also “face recognition” + “place” . some features are useless for professional business but some could make my work easier.

    Hi schalliol,
    I am not disagreeing with you - and I will use these features too and really look forward to Aperture 3.0 or whatever comes next as much as anyone. I just meant that we need to be realistic about the capabilities of face recognition in a "pro environment" - i.e. you wouldn't want the grandma to be identified as the bride, just because she wore similar glasses and her haircolour happened to match the bride's on the day... All I am saying is that it is not difficult to quickly tag people with keyword bar presets "manually" - if a face detection helps here by doing the "obvious" ones by itself - awesome - but it needs to be configurable so that a group shot or a difficult one (smaller "head" in the picture/background people) are not mis-matched etc.
    Note: I have not yet played with iPhoto09 so I should probably not write all these speculative things anyways and just await the final product, I rest assured the Aperture team is aware of all these things and will come out with some really nice new features.
    My second point was that many of us are waiting for slightly more critical things - i.e. selective editing, better sharpening & smoothing, non-destructive effects/filters etc. - whereas the face-recognition is a "nice to have" thing rather than a make or break - as it can obviously be accomplished by keywording in the traditional way already - manipulating an area of an image with Capture NX's or Nik's Viveza precision is still not possible by contrast, at least not in an Aperture-only and non-destructive way (technically it is non-destructive to your original image of course, but every change takes up space by creating a "full image" copy.
    It will all come to us eventually - they sure got the resources to create world-class products.

Maybe you are looking for