Color corrections dissappear with title

I used the fast color corrector on my video sequence. Everything looks good now. Then as a final step, I added lower third titles to the video. The problem is whenever the titles display, all of my color corrections disappear. When the titles fade out, the corrections come back. Has anyone else had this problem? Has anyone else solved this problem? Thanks.

Thanks for the quick reply. The problem is in the real-time preview. When I exported it into a quicktime movie the problem was gone. Rookie mistake, sorry about that.

Similar Messages

  • Color Correcting Clips With Dissolves

    When you're color correcting clips in a sequence with dissolves, are you color correcting the entire clip or just the part before or after the dissolve?
    Do you have to remove other effects to color correct the whole clip?
    Sure hope not but there seems to be a color change in playback when I hit the dissolves between clips.
    Haven't rendered yet but have made a lot of changes to the color in a long and cutty sequence.

    I imagine that the color changes you are seeing are because the sequence is not fully rendered. Do a test by fully rendering just a section.
    And yes, you are color correcting the clip including any transitions in and out.
    Message was edited by: Michael Grenadier

  • Resolved Color Correction issue with MAC OS X and Canon pro 9000

    Problem: Unable to set the Color Correction option to NONE. I have looked all over the net and it seems that there are lots of people with this problem. After months and months of battling with this issue I have finally come up with the answer. Its all down to the fact that MAC OS X comes with a pre installed driver for the Canon Pixma Pro 9000. To cut a long story short this driver needs to be deleted from your system files before you update your driver, which you need to download from the canon website. I downloaded version 4.8.6. The new driver does not seem to work with the default driver still on the comp. After following directions below you should finally be able to get your Color Correction option on your driver working.
    First things first... go to the following location and delete the canon pro 9000 driver.
    Location: /Library/Printers/PPDs/Contents/Resources
    File Name: CanonIJPro900series.ppd.gz
    (make a backup of this file if you wish )
    Once you have deleted the driver you need to restart your mac.
    After rebooting install the new Canon Pro 9000 driver. I suggest installing version 4.8.6(this one worked for me)
    Reboot Mac again just for good measure then do a test print and you should now be able to set COLOR CORRECTION to NONE.
    I know there are a lot of people out there having the same problem so if you are reading this please pass the solution on to others.

    Hi Japamac,
    Indeed a new cable just bought solved this problem.
    Still wandering why my MacbookPro was able to print and my PowerMac not, maybe another driver issue?
    Thank's anyway for your reply.

  • Need help: How to color correct professionally (with examples)

    Post to video forum (before and after): Hi, I really need some help  I want to color correct this video. I would love if someone had tips, either on:
    -How you would correct the original
    -What it looks like I'm doing wrong in my attempts (last 2 pictures)
    Thanks!

    I'd crunch it up a little more with a curves adjustment. These children don't look healthy and stronger contrast will help. Also push the reds toward a slightly more orange tone. They look too purple. There's also still an overall purple tinge which needs to be eliminated. See the included 3 minute quick shot of mine. Not perfect and requires more tweaking (too much yellow now, see the lips), but I think it better represents the feeling one would want to convey.
    Mylenium

  • Color correction problems with multiple monitors

    I just upgraded my Win 7 from RC to RTM.  I then updated my color correction using Gretag Macbeth i1 for both adapters. My system has 2 video cards and 3 monitors.  Monitor 1 runs off adapter 1, monitors 2 & 3 run off adapter 2.  Both video cards and all 3 monitors are of the same model.  I set adapter/monitor 1 to the ICC profile 1, and adapter 2/monitor 2&3 to ICC profile 2 from Gretag.  Not running LR, everything looks as expected.
    When I run LR on the primary monitor green leaves turn orange, if I had to guess I would say I'm loosing the green information.  If I move LR to display 2 or 3 the colors are as they should be.
    I ran into this once before and it was something simple to fix this, but I can't seem to find it now.   BTW, this worked just fine before the upgrade from RC to RTM.

    At first I thought a reboot cured the problem, but apparently not.

  • CS4 - Color Correction Bug with MPG2 export

    I just want to verify this is a bug others are seeing before I submit the bug report.
    1. Create a new timeline of your choice, (size etc does not matter)  Make sure "maximum bit depth" is selected.
    2. Next, place a clip of your choice (HDV, AVCHD, or EX1) that has bright sceen in it so the IRE hits 110.
    3. Place the Fast Color Correction or Three way color correction effect on the clip.  Change somthing (like white balance or whatever)
    4. Export the clip to MPG2 BlueRay.  Any preset will do.
    5. Now bring the just exported M2V clip back into the project and place it on the timeline.  The max IRE value will be 100, not 110.
    6. If you do step 4 but export the H264 BluRay, the IRE will stay at 110.
    I was doing some CC and it was driving me crazy.

    Bump. Has anyone seen this problem? Seems like a very comon workflow.  CC a clip, then export the MPG2?

  • Premiere Pro Color Correcting Help with GoPro Protune Footage

    Hey guys,
    I'm working on a video I made of my daughter's birth. Most of the footage is from my DSLR and looks fine, but Im' having a helluva time getting my GoPro footage to look even remotely decent. I shot in ProTune thinking I could get more out of it in post (plus, I wanted the 24 fps option). It's a lot of indoor footage and I don't expect miracles but I'm trying to get the best I can out of it.
    I start by using fast color corrector to white balance based off hte door trim. That works but it still looks really, really flat and dead. Tried using Contrast, RGB curves, etc. and I can't seem to get any sort of decent image out of it.
    Any tips or ideas with where to start? I don't need it perfect, just want it as good as i can get it. Most of my indoor shots look like this for some reason :/
    PS, I didn't transcode in Cineform at all. I just dumped the MP4 files right into Premiere Pro.

    If you're on PrPro CC, I'd get Speedgrade also and take a run over to it for your correction work ... commonly known as grading. Yea, you can do it in PrPro, but as a noob ... never got the footage I worked "there" as far along as when working in Sg. Might help.
    Next ... the scopes here are quite interesting ... first, set your lower-end of the footage to the point where you either go for good "broadcast" (blacks that you WANT black about 16 on a 0-255 scale), then lift the contrast/highs/whatever control until your whites just tip out on top. Next correct for gamma, the overall placement of the mids/upper mids, then start with your color work.
    You will probably need to raise in-coming sat up a bit to start making best choices there ... but then I'm also a noob so I'm waiting for the corrections that shooter or Jim will chime in with ... 
    Neil

  • Color correcting in french final cut

    Hi everyone,
    I'm using a french version of final cut pro HD 4.5. I can't find the color correction tab with the three cercles, does anyone use a french version so I can fallow propely the path that will lead me to make my color corrections. If not, maybe you can guide me in my task: I shot a video with a white machine. When I did the shooting, I wanted to create a look that cannot identifie any space or room, so I've used white foam core. The problem is that even if I did my white balance, my background and the machine is not white enought to give the impression of a " no where place". It's been a while since I did editing and I've never use color correction before. I know that there are tutorial that exist but time and money are a matter of facte that I can't purchase them for the moment. If anyone can help me and guide me in my task, because I've lost a lot of precious time trying to find a solution, it would be very appreciate.

    Jacques,
    Merci énormément, j'aurais dû écrire avant, je n'aurais pas perdu autant de temps à trouver que c'était Étalonnage qui correspondait au Color correction.
    Maintenant, comment je fais pour isoler mon objet de mon fond et de plus, mon fond n'est pas le même blanc partout, est-ce qu'il y un moyen d'uniformiser le tout sans que mon objet principal soit surexposé?
    DAVID,
    Your answer was helpful but Jacques was able to identifie the exact term wich help me a lot because the word in french is quite different then color correction.
    Now, how I isolate my object from my background and moreover, my background is not the same white everywhere, it there a way of standardizing the whole background without my principal object being over-exposed?

  • AE CS6 - 3D Compositing and Color Correction workflow

    AE CS6 - 3D Compositing and Color Correction workflow
    Hello everybody,
    I have some questions about work flow in AE concerning compositing and Color Correction. I saw many tuts about (f.e. Lynda.com Premiere Pro Color Correction and Enhancement... and tuts by Andrew Davis here in creative.cow).
    Essentially, he have this CC work flow:
    GRADING (primary and secondary)
    Adjusting Tonality (Brightness and Contrast)
    Adjusting Colors (White balance and fix color dominance)
    MATCHING
    Conforming colors of different clip shoted with different camera and lighting set up.
    ENANCHING LOOK
    Giving to all clips a unique "look"
    But what does it  happen if we have NOT just some clips but ALSO a 3D object (rendered in a 3d sw or, actually also a 3d object inserted by 3D Element by videocopilot)
    or/and
    a keyed clip from a green screen shot?
    How does this footage (3d object and green screen keyed shot) transform
    the aforementioned work flow?
    We have to consider that this footage (3d object and green screen keyed shot) must to be pre-multiplied to make a right compositing but when you make CC it must be again "straight"... (NOT pre-multiplied)
    Is really hard also understand how dale this work flow between AE and Pre Pro if you want to make CC in Pre Pro after compositing in AE.
    I try to present a work flow for this (very common) situation:
    I have a landscape clip as a background
    a keyed clip (pre-multiplied) with a Character watching sky
    and a 3d (pre-multiplied) object U.F.O. on sky.
    When I have done compositing, how make I a right CC of all footage if I have two clip (3d object and green screen keyed shot) still  pre-multiplied?
    I think, but I'm not sure, that should be a good idea to send to Pre Pro a composited Comp with separate layers (by dynamic links)  to have  all single separate layers (Background, 3d object and green screen keyed shot.. but also the Color Warping...!). Than, in Pre Pro you should make a CC (Grading)  just for a BG and than try to Match (Matching) this color corrected BG with 3d obj and keyed shoot. But we have a problem at this point cause our 3d object and green screen keyed shot are still pre-multiplied, and before make matching we have to re- multiplied theme, but how? And if we re pre-multiplied them, compositing will be also right?
    Or maybe, before exporting comp from AE to Pre Pro, he have to create both layers for 3d object and green screen keyed shot, one pre-multiplied and one "Stright"? But, again, how to combine them to have a right compositing and a a right CC?
    Anybody can help me to understand or maybe suggest any tuts to dale this common issue in AE- Pre Pro?
    Many, many thanks!

    Dave is correct. (And so is Mylenium. No need to be rude, when he was jsut trying to explain that you were introducing unnecessary complexity.)
    The color matting is removed to interpret the alpha channel when you import the footage. After that, any color correction that you do to a layer based ont hat footage item doesn't have anything to do with whether the channels were straight or premultiplied for the source item.
    You color-correct your individual items to amke them match as part of the compositing process in After Effects. Then, if you want to do a color grade of the shot in Premiere Pro along with other shots, you'd be working on the single rendered/flattened composite, so the details of the original elements that went into the composite are irrelevant.

  • FCP and negative film color correction?  Any experience?

    Hello There,
    I'm running into more and more low budget filmmakers who are trying there hand at making short films in Super 8 movie film (yes, it's still around believe it or not). Kodak has two new film stocks out for Super 8 and one is 200T and the other is 500T (both cut down from their pro 16mm and 35mm pro stocks).
    When these filmmakers get this stuff developed they don't have the money to have it transferred at a pro shop so they are using equipment made by a company in Texas that does a very good job at transferring the film, but it doesn't have the adjustments needed to make negative film look the way it should.
    I know a few people who color correct it with FCP and FCE and they can actually make it look fairly good.
    My question is: is there a plug in or other software that can be used that is meant to do this? Or does anyone have any experience on this site with color correcting negative film with FCP? If so, what filters do you use?
    Any thoughts or comments would be great to hear from. Remember, I know this can be done by the big players, what I want to know can it be done with FCP and still look fairly good?
    Thanks for your help,
    Mike

    Well, this is pretty easy. Just throw a CHANNEL>INVERT on the negative footage before you color correct. You might have to do that before you even begin editing, as that turns the negative image into a positive one. It isn't Real Time though, so you'll have to render all the time...every cut. Unless you add the filter an export a self contained QT Movie of each tape. But then you lose time code.
    So why do they do this again? Cheaper...OK. Ease? Not really.
    Shane

  • Color correction with a HD TV

    Can I use my new Panasonic HD TV model TH-42PX80U as a NTSC monitor for secondary color correction using both Final Cut Pro out of a Macbook Pro intel? What cable I can use to conect via HDMI? Will the color acuracy will be similar to that of a NTSC color correction monitor? will my TV do a decent job for NTSC? THANK YOU FOR YOUR HELP!
    I am not sure I have this HDMI cable to be use in my macbook pro does it comes with it?

    I have to go back to the avid because they work on avid: adding titles, outputting to digibeta and so on
    FCP does all this..there are hundreds of editors and facilities doing this daily, on broadcast television shows. I have been doing this for over 2 years.
    As far as I know, there is compression-decompression going to tape and back even in fcp, so there IS a little loss.
    Where did you hear that? It is incorrect. Outputting via a capture card to digibeta results in no quality loss whatsoever.
    If you have an "official" source of information saying otherwise, please do let us know.
    I looked at the AJA website and Decklink website and neither of them say that they compress-decompress upon output. If footage is captured via firewire, there is no quality loss, as was done on the Avid...and similarly with FCP. If you capture with a capture card as a different codec, it will compress it into that codec, but depending on the codec, there is little loss, nothing you'd notice. But Avid does the same thing, capturing to a different codec will result in unnoticable loss in quality. Outputting DV to digibeta...there will be a conversion to the digibeta format, that is unavoidable...on AVID as well as FCP. But again, unnoticable.
    Can you point to an "official" Avid site that says there is no compression-decompression upon output?
    the broadcast safe filter doesnt cut illegal blacks, cuts off only the values that are too high.
    Uhm...where did you hear that? It cuts off the top and bottom. Although I don't rely on this solely...I color correct each clip until it falls within range, then add the Broadcast Safe filter, just in case.
    FCP handles adding titles and outputting to digibeta, but then you'd need to invest in a capture card. But, since you are in DV land, why not output to a DV tape and then they capture that DV tape...that is a lossless transfer?
    Shane

  • Work Flow with FCP and color correction

    I am looking for a decent workflow between FCP and motion when I need to apply color correction to the clips.
    I have a goup of clips in FCP that I would like to send to motion, animate them and send them back to FCP. Problem is I want to use FCP for the color correction- nicer than motion's. The, all bad options I have come up with are:
    1. color correct in FCP and then send to Motion- will not work because filters are not applied in send.
    2. Export the clips as one QT self containned movie- I lose the clip partitioning.
    3. Exports individual clips to QT then into Motion- I lose the clip ordering
    4. Color correct after I get back into FCP from Motion- clip boundaries are lost making applying color correction harder.
    Any ideas?
    Rick

    I've done this two ways - both variations on the methods you have outlined. First and simplest and one I used last week on a PSP project was to apply the color correction to the Motion clip (.motn file) after it came back from Motion. This is simple and easy, but if you've done titling, you may not want to color correct that.
    The second is as you said to render and export a self contained movie, then import it and copy it onto the timeline above the original clip that produced it, thus (at least organizationally) maintaining a connection between them. I then send the quicktime to Motion.
    Sorry I cannot think of another better way of doing it...
    Patrick

  • Why is my rendered color corrected movie pixelated with jagged edges after rendering?

    Hello All,
    I am new short film movie producer and have just started using Adobe Premiere CS6 and Audition CS6.  Comparing my flat footage before adding it to a sequence and color correcting it and rendering it, it looks fair.  But after all these transitions it now looks pixelated along with very jagged edges.  This is my first short film for my first client and I am at my witts ends!  I have tried to copy the sequence and transfer it to a new sequence with differnt settings comparing the pixel aspect ration, fps, trying to match the clips specs and I am so stuck. Can anyone please offer any suggestions or let me know if there are procedures I have overlooked.  Thanks Adobe Community.
    Michael Diaz

    Let's back up a step - what camera do you use? If it's an HDV model, then yes you have anamorphic footage. Simply choose an HDV sequence preset to match. If your camera shoots 720p or full 1920x1080, those are square pixel (1.0) formats and are not anamorphic (anamorphic does NOT mean widescreen, it means "stretched to widescreen" basically).
    In any case, drag a clip to the New Item button for best results until you get more educated and confident about the different formats you may be working with.
    If you copied and pasted the contents of the SD sequence into an HD sequence, all filters and effects you had applied before should remain intact and not need reworking, except possible for titles and things involving scaling (since the size has changed).
    As for exporting, you typically will NOT want an anamorphic export, except for widescreen DVD. You will not see anamorphic mentioned though, just choose "MPEG-2 DVD" and an appropriate widescreen preset and Adobe knows what to do from there. For web/computer viewing, best to avoid anamorphic footage, since many players assume 1.0 PAR and do not adjust the image for non-square pixels. So if working with 1440x1080 footage, and exporting to web or YouTube for instance, export as 1920x1080 (1.0) or 1280x720 (720p) so the viewer sees the proper 16:9 output, or the image may be squished otherwise!
    Thanks
    Jeff

  • Color Correction with in Final Cut Pro 6

    Hi All,
    I have a showreel of my work, and some of the clips have sections that are darker than I would like them to be, and I would like to correct the color issues. Is it possible to only correct 3 seconds of over dark video, and not have the entire 2 hours thus over bright? I have tried with key frames, and maybe I am not doing the right way.
    I put a keyframe on the 1st frame of the clip in question, then on the last frame of the correct section of the clip, then 1 frame later another keyframe, this is now on the incorrect color clip, then 2 more keyframes, last frame of incorrect color, then on the 1st frame of correct video.
    Is this ok?
    Justine

    A better way is to blade (or add edit) at the beginning and end of the section that needs the correction and just apply the color correct filter to that section. 

  • I downloaded CS6 Red Plug-In and added to Package Contents, replaced the current files with the new without backing up, now my RED footage thumbnails and color-correction don't WORK! How do I get my old importerRed file back!!?? HELP!

    I downloaded CS6 Red Plug-In and added to Package Contents, replaced the current files with the new without backing up, now my RED footage thumbnails and color-correction don't WORK! How do I get my old importerRed file back!!?? HELP!

    Try asking in the Premiere Pro  forum seems to be an Adobe Lab for Premiere Pro

Maybe you are looking for