Color management does not work as expected, different from v3.6

Color management seems to work differently than FF 3.6.
On a home page, I have a background graphic that is supposed to blend into the page background. I have left that graphic untagged so the blending will work in all browsers regardless of color management. This works fine in IE, Safari, Chrome, and Firefox 3.6 in all color management modes.
In default mode 2 in v3.6, the graphics is not color managed because it is untagged. The page's background is left as is, and things blend perfectly. In mode 1, full color management, the graphic is assumed to be srgb and is color managed, and the page's background color seems to follow.
In Firefox 4, using mode 1 creates a mismatch between graphic and background, as if this time only the graphic is color managed and not the rest. This is bad because it now creates a situation where we cannot be sure that there will be a match.

A good place to discuss issues with Minefield 4 nightly builds and Firefox 4.0 beta builds is at the mozillaZine Firefox Builds forum.
You need to register on the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=23

Similar Messages

W530 Color management does not work

I just received a W530 to replace a W520 from lenovo. I've loaded my monitor profiles that I've been using on the W520 into the proper directory on system32. Using the color management control panel I've set up the w530 identically to the W520, however, when I load and select different profiles for my monitor, and make them the default, nothing happens, the monitor remains the same. This happens even loading completely wrong profiles that would make the monitor look terrible if they loaded. On the W520 selecting profiles and making them the default under the color managment control panel works properly.
Any suggestions would be very welcome at this point. The display bios settings are identical on both machines, as are the settings for the monitor under the advanced tab.

I solved my own problem, with a helpful post getting me to the (not so obvious) screen to select windows management for color:
http://forum.notebookreview.com/lenovo/675361-w530-owners-thread-36-print.html
thanks to the poster - Flicster

Color Management Does Not Work in AE

I color manage everything I do in Photoshop and Lightroom without a hitch.
After Effects CS5 does not color manage correctly. It simply does not work. The only setting I could find for it simply asks if you want it more accurate.
Maybe there are other settings somewhere, but I have not found them.
Is there anyone out there that really understands color management that is having the same problem?

I want to be able to see on my wide gamut monitor during AE preview, what I see in Photoshop. I work with stills and thought that AE would simply allow me to view my stills based on my color profile.
AE will recognize embedded color profiles, but you still need to tell it how to retain or convert them by setting up the project color space in the project options and assigning a preview (proof) profile to your comp (your monitor profile in this case) and depending on what other stuff figures in, you may need to deal with the linearization options and Gamma overrides or manually apply a color profile converter effect. Anyway, depending on what you are after and where you plan to use your resulting video, none of that may make sense and you may be tackling the problem from the wrong end. If your files are going to end up on a DVD, BluRay or as a Flash video on the web, extensive adjustments using your own profiels won't do any good, as color spaces and target profiles for specific video formats are fixed. So in fact you may need to spend time to adjust your imagery to work without color profiles or the standard sRGB profile at least....
Mylenium

CS6 Image Trace Ignore White feature does not work as expected coming from Live Trace in 5 and 5.5

When I click ignore white in 5 or 5.5 using say a basic black and white image I'm tracing, I get zero white. Usually for our purposes, we will direct select the frame and remove it then drag select all the artwork and color it whatever pantone the customer needs, save, place in the InDesign document relevant tot he image, and send to print. In CS6, ignore white leaves, ironically, a ton of white so deleting the frame and then drag selecting gives you a question mark in color and of course it follows that coloring, colors all kinds of things. Same picture, two different versons of trace and our job just got alot more time consuming.

This is exactly the criticism that I have posted on occasion.
Instead of producing an orderly stack of objects like Streamline did, Live Trace produces compound paths.
So if you want to simplify your trace and avoid duplicate paths you need to release the compound(s) and rearrange the stack. This takes time and a certain amount of skill.
With Steamline you could of course make your own compounds if you needed them, but making a compound is a simpler business than releasing one and editing the colours of the resulting stack.
Does anyone know whether Streamline is available for OS X?

Color Highlights does not work for chart

When I set the color coding in the chart, it works fine if I run the crystal report on the same DB that I use to design the report.
Problem occurs if I run the report on another DB. Color Highlights does not work in that case.
I am using JRC to run the reports.
Thanks & Regards,
Amrita

Hi Jehanzeb,
In chart expert there is a tab "Color Highlightsu201D. In this tab one can specify the condition based coloring.
In my case I want to show "RED" color for Unauthorized events andu201D GREEN" color for Authorized Events.
While creating a report suppose I am using a database server "DB-A".I set the color highlights in the chart as I explained. Please be noted that when we click on the color highlights tab it asks for the database login.
To view the report we have our own server and we are using JRC APIs.
Hence I map my report with server and try to view the Report. My Server is connected with database "DB-B" which is different from the database I used to create the report.
This time color Highlight I have specified while creating the report does not work.
I have tried using the "Format Series Riser" option. But the problem with this is that, it does not color the chart conditionally.
I mean if I give GREEN for Authorized and RED for Unauthorized. It gives the green color either to Authorized or Unauthorized which so ever occur first in the chart.
For example:-suppose there is no Authorized Event on date 15-Jan-2009 and I select the date range starting from 15-Jan.In this case Unauthorized event is the first to print on the chart hence this event get the green color though I expect this events to be in RED color.
Regards,
Amrita

Silverlight 5 binding on a property with logic in its setter does not work as expected when debug is attached

My problem is pretty easy to reproduce.
I created a project from scratch with a view model.
As you can see in the setter of "Age" property I have a simple logic.
public class MainViewModel : INotifyPropertyChanged
public event PropertyChangedEventHandler PropertyChanged;
private int age;
public int Age
get
return age;
set
/*Age has to be over 18* - a simple condition in the setter*/
age = value;
if(age <= 18)
age = 18;
OnPropertyChanged("Age");
public MainViewModel(int age)
this.Age = age;
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
In the MainPage.xaml
<Grid x:Name="LayoutRoot" Background="White">
<TextBox
Text="{Binding Path=Age, Mode=TwoWay}"
HorizontalAlignment="Left"
Width="100"
Height="25"/>
<TextBlock
Text="{Binding Path=Age, Mode=OneWay}"
HorizontalAlignment="Right"
Width="100"
Height="25"/>
</Grid>
And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
public partial class MainPage : UserControl
private MainViewModel mvm;
public MainPage()
InitializeComponent();
mvm = new MainViewModel(20);
this.DataContext = mvm;
I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
Case 1: Debugger is attached =>
TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
Case 2: Debugger is NOT attached =>
TextBox value will be "18" and TextBlock value will be "18" - CORRECT
It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
Has something changed in SL5 and logic in setters is not allowed anymore?
Configuration:
VisualStudio 2010 SP1
SL 5 Tools 5.1.30214.0
SL5 sdk 5.0.61118.0
IE 10
Thanks!

Inputting the value and changing it straight away is relatively rare.
Very few people are now using Silverlight because it's kind of deprecated...
This is why nobody has reported this.
I certainly never noticed this problem and I have a number of live Silverlight systems out there.
Some of which are huge.
If you want a "fix":
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
//PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
Storyboard sb = new Storyboard();
sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
sb.Completed += delegate
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
sb.Begin();
The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

Norton password manager does not work on 8. How do I return to a previous version?

when I updated to firefox 8, Norton password manager does not work. How can I return to a previous version. I am surprised that you introduced an update missing this.

Norton needs to be updated.
http://community.norton.com/t5/Norton-360/Firefox-8-Support-for-Norton-Toolbar/td-p/581640

Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy. What should I do?
I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM. But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install. It is like an infinite loop!
Please, someone help!
Thanks!

HI gener7!
I'm sorry but I am not on Creative Cloud. I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application. My AAM version is: 8.0.0160
The link you provided was the update that I wanted to install but it does not work. A window shows up during that install that says:
We've encountered the following issues.
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
Thanks!

"Pick a Color" tool does not work

Since upgrading to OSX Yosemite the "Pick a Color" tool for color fills/matches in Microsoft Word for Mac does not match the color picked.

Hi Jehanzeb,
In chart expert there is a tab "Color Highlightsu201D. In this tab one can specify the condition based coloring.
In my case I want to show "RED" color for Unauthorized events andu201D GREEN" color for Authorized Events.
While creating a report suppose I am using a database server "DB-A".I set the color highlights in the chart as I explained. Please be noted that when we click on the color highlights tab it asks for the database login.
To view the report we have our own server and we are using JRC APIs.
Hence I map my report with server and try to view the Report. My Server is connected with database "DB-B" which is different from the database I used to create the report.
This time color Highlight I have specified while creating the report does not work.
I have tried using the "Format Series Riser" option. But the problem with this is that, it does not color the chart conditionally.
I mean if I give GREEN for Authorized and RED for Unauthorized. It gives the green color either to Authorized or Unauthorized which so ever occur first in the chart.
For example:-suppose there is no Authorized Event on date 15-Jan-2009 and I select the date range starting from 15-Jan.In this case Unauthorized event is the first to print on the chart hence this event get the green color though I expect this events to be in RED color.
Regards,
Amrita

Directory Naming with OFM 11g - Identity Management Does Not Work.

I tried to find document about how to setup/implement Directory Naming with Oracle Fusion Middleware 11g- Identity Management, but without luck. We implement Directory Naming with IM 10.1.4.3 on Linux that is 32-bit only and doesn't coexist very well with OEM GC (64-bit). So we are very eager to try 64-bit of IM 11.1.1. Any information is highly appreciated. Thanks huge.
Edited by: bhqu888 on Aug 16, 2009 6:51 PM
Edited by: bhqu888 on Aug 16, 2009 6:56 PM

I installed OFM IM 11.1.1 on RHEL 4.8 (x64) successfully and OID is up and running. Using Net Manager in the $ORACLE_HOME/bin dir I can upload TNS to OID. But Directory Naming does not work. Dbs client could not log into any dbs server through this 11g OID. Our 10.1.4 OID works fine.
Edited by: bhqu888 on Aug 16, 2009 6:51 PM
Edited by: bhqu888 on Aug 16, 2009 6:58 PM

HTMLEkitorKit color change does not work on existing color

My problem is that I use StyledEditorKit.ForegroundAction to update the color of the selected text. It works the first time but if I select a substring of the text with the color attribute and apply the foreground action again the color attribute does not change. If I change the font size or the font family first applying the foreground action to the substring does work. A previous posting listed this as a known bug. I am using sdk 1.4.1_03. I have tried using CSS attributes and setCharacterAttributes as well with no success. Does anyone know of a solution?
Steve

Anyone? I tried setting the character attributes of the selected substring one char at a time to no avail. I also tried remove the attribute from the element but that removes the attribute from the whole string and not the selected substring. Help!
Steve

Color Context does not work properly

Hi,
I'm using MII 12.1
ColorContext does not work properly with Lights and Multilights. I did not test other grids.
For every match it shows black colored lights.
Is there a way to solve this problem?
Thanks.

Cemil,
There was a bug in the early versions of 12.1 for color contexting. Color context changes were made in the display template were not being saved. I would strongly urge you to upgrade to SP5 patch 1. However, if you want a very crude way to test if your contexting is working the way you want it to:
1. Export your display template
2. Find the color context section of the xml and change the settings to the desired color coding
3. Import your modified display template
4. Test
I do not recommend this as a short term or long term solution. It is a hack and should be recognized as such. But it will allow to test your configured display template's behavior.
Regards,
Mike

CuciLync 9.2 - registry key configuration does not work as expected

Hi,
according to the Administration Guide for CuciLync 9.2.2 some registry keys are supported to configure the client.
In the chapter 'Phone Parameters' there is a statement that four registry keys are supported:
CcmcipServer1
CcmcipServer2
TftpServer1
TftpServer2
In the next chapter 'CTI Load Balancing' there is an explanation that the registry key UseCUCMGroupForCti is also supported.
=> Does that mean that five registry keys are supported and not only four ?
My next questions leads to the possible values for these registry keys.
With CuciLync 8.6 it was possible to leave the registry keys for CcmcipServer empty.
In this case the IP addresses for CcmcipServer were automatically defined by downloading the config file.
And with UseCUCMGroupForCti these IP addresses were 'copied' to CtiServer.
That means with CuciLync 8.6 there was need to define CcmcipServer and CtiServer.
Only the TftpServers were configured by registry keys.
=> Is this also supported with CuciLync 9.2 ?
=> If no: In which future version do you plan to implement this ?
=> If yes: Are there any extra settings needed ? Because it does not work at the moment
Thanks for your feedback
Best Regards
Carsten Lucy
(Bayer Business Services)

According to MSDN:
When caching is enabled, the module caches the service information data until it polls the Service Control
Manager and discovers that the data has changed. If changed, the module updates the cached data and returns it as output. You can disable this caching feature, but doing so will cause the module to return data at every polling interval instead of only returning
when the data has changed or when the polling interval count has reached a multiple of 10.
However, the configuration is DisableCaching, and the default is False. Go figure that one out. Gotta
love Microsoft configuration names and documentation! If true, then it's not disable..... :)
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

File manager does not working

file manager does not showing files which are installed by me on Nokia 5233. Please help me. Due to this I can't delete unwanted files

File manager wont show you the apps installed. You will find them thru menu>settings>app manager >installed applications. Press and hold the app you want to remove.
In Love With My C6-01:Now running on Nokia Belle!

VPD context_sentisitive policy does not works as expected

Hi,
I'm trying to implement CONTEXT_SENSITIVE RLS policies:
http://docs.oracle.com/database/121/ARPLS/d_rls.htm#ARPLS67721
Server re-evaluates the policy function at statement execution time if it detects context changes since the last use of the cursor. For session pooling where multiple clients share a database session, the middle tier must reset context during client switches. Note that the server does not cache the value returned by the function for this policy type; it always executes the policy function on statement parsing. Applies to only one object.
What I have discovered so far:
1. policy function executed each time when query executed from SQL*Plus. Independently of context changes.
2. policy function executed only once when query executed from PL/SQL.
3. When we have a PL/SQL procedure like this:
begin
<query>
<change context>
<query>
end;
Additionally, query (cursor) is not present in PL/SQL cursor cache, then
policy functions executed only once when first query executed.
So wrong results are possible when application context changed in a way that policy function returned predicate also changed.
4. JDBC: policy function executed each time when query is executed. Policy function executed only once when I enabled statement caching:
OracleDataSource ods = new OracleDataSource();
// skip
ods.setConnectionCachingEnabled( true );
ods.setImplicitCachingEnabled( true );
Properties cacheProps = new Properties();
cacheProps.put( "InitialLimit", "1" );
cacheProps.put( "MinLimit", "1" );
cacheProps.put( "MaxLimit", "5" );
cacheProps.put( "MaxStatementsLimit", "50" );
ods.setConnectionCacheProperties( cacheProps );
5. Queries with RLS policies are not cached in the session cursor cache. For example, if we executed same query multiple times in SQL*Plus - then this query will be not cached.
2 and 3 (PLSQL) relates to PL/SQL cursor cache.
As a result, when we disable PL/SQL cursor cache (setting session_cached_cursors=0), then policy function executed each time in PL/SQL.
What I have observed, it is not agreed with documentation on context_sensitive policies (I provided a link above):
Server re-evaluates the policy function at statement execution time if it detects context changes since the last use of the cursor.
Signature of DBMS_RLS.ADD_POLICY procedure was changed in 12c with additional arguments: NAMESPACE, ATTRIBUTE.
I tried to use them with no luck, results are the same.
In my opinion statements below are contradict to each other:
1. Server re-evaluates the policy function at statement execution time if it detects context changes since the last use of the cursor.
2. it always executes the policy function on statement parsing.
First, documentation says that the policy function evaluates at statement execution time.
Second, documentation says that the policy function executes on statement parsing.
I have used Oracle Database 12.1.0.2 for testing.
I provided a script that I have used in my tests:
rls_policy.txt - creates test schema and policy
rls_sqlplus.txt - runs simple select against query with RLS policy
rls_plsql.txt - more complex example, runs some anonymous blocks with queries against table with RLS policy.
In my opinion, context_sensitive policies does not works as described in the documentation.
Is it a bug or I'm missing something?
Please advice.
Best regards,
Mikhail.

Thanks Scott. May i know why i should never use user policies for denying access?
From my readings on some articles, there is no way to deny users permission in sharepoint after granting domain users with read access other than the web application user policy in our case (with certain reason, we need this group to be granted with
read access but we would like to restrict small amount of users from seeing the page)

Color management does not work as expected, different from v3.6

Similar Messages

Maybe you are looking for