Color not using all CPU

Hello, Color is rendering very slowly on my iMac 20" with 2,13 GHz CPU and ATI X1600. According to Activity monitor, it takes up to only 30 percent of CPU. Do you have any hint what may be wrong? There are no other system-intensive tasks running.

It is using about 107% on our Quad...
(Is there a way to measure the GPU useage?)

Similar Messages

HELP: Premiere Pro CC not using all CPU and RAM during rendering and export

Hello,
I am using Premiere Pro CC on a Windows 7. My timeline is quite simple with two videos, one with the movie (mpeg) and the other with the subtitles (avi).
When I render the sequence in PP or export, the rendering time is way too slow and it only uses around 15-20% of the CPU and 3 GB of RAM.
My hardware config is :
- CPU : i7-4770k 3.50Ghz
- RAM : 8 GB
- Disk : 2 x 3 TB SATA (no raid)
RAM is not the bottleneck, neither the disk access.
I have tried rendering and exporting the same project on an iMac (with an i5 2.7 Ghz and 4 GB RAM and only 1 disk) and the result is 4x faster !!!
The CPU usage is close to 100% as well as RAM usage.
So how come PP uses all resources availble on an iMac and not on a Windows 7 ?
Is there any known bug or software bottleneck on Windows 7 ?
My machine is brand new and nothing much installed besides Adobe products.
Any help is very much appreciated.
Thanks,

I just rendered out a a 2 minute sequence with about 100 clips in it and Colorista effects on everything to the Vimeo 1080 H264 preset. It took about 5 minutes to render straight from Premiere, it used all the recourses it could, my CPU was running at near %100, same with my ram and GPU, I was happy.
Then I did another render with Red Giant Denoiser and it now wants to take 30 mins and it is only using about %20 of the recourses available. My problem isn't that its taking longer with Denoiser but that its not using all of my computers CPU and GPU.
Im rendering at maximum render quality and bit dept to H264 (Im happy to wait the extra time), if I try to use VRB 2 it encodes 1 pass at a time and wants to take up to 40 minutes.
I would appreciate some advice on this.
Premiere Pro CC 2013
2.6 GHz Intel Core i7
NVIDIA GeForce GT 750M 2048 MB (CUDA GPU enabled in Premiere)
16 GB 1600 MHz DDR3
OS X 10.9.4 (13E28)

Mac PP CS5 not using all CPU anymore

All,
I was a cutting a project a while back and put it to the side for a while. I just went back to it and asked Prem to render the work are and was surprised to see it taking forever. I opened the CPU perf view and found hardly any CPU being used. I have a MacPro 2.9GHz 12 core machine with 48M memory and the project drive is a striped set of WD Caviar Blacks. Not only is the machine not breaking a sweat its not even getting out of bed.
Yes I have installed Apple patches since then and some software. PPCS5 is up to date. We I was using the machine a while back it was firing on all threads and cores.
Has anyone seen this before?
Jim

Hi Bill,
Thanks for your email. Yes I did try PPBM5 with some success. Separate to this I decided to let the render run from end to end on my project to see what would happen. So what I saw:
- first 600 odd frames very quick (very = blindingly)
- then it got to 900 odd frames very quick but then came back to the 600th odd frame where each frame took minutes to render for about 60 frames.
- all this time the machine didnt break a sweat,(basically flatline).
- after the slow 60 frames all the processors came to life and for the rest of the render (thousands of frames and multiple sequences) and it was rendering normally
Im trying to figure out what those 60 frames were, as I cant see anything overly complex there that would mean PPCS5 would fail to use all the CPU available (if anything 1 core jumped up every now and then).
Thanks

Cc2014 not using all CPU cores or GPU

I'm using the new CC2014, and I exported a project straight out of Premiere and it utilized all 8 of my CPU and my GPU. When I export using Adobe Media Encoder, it only uses one core and doesn't seem to use the GPU at all. I tried changing the setting to from GPU to software only, and it didn't seem to make a difference.

Just found out, that drag and drop PPro Sequences into AME seems to be a work-around.Plus unchecking the "Import Sequences Natively" in AME.
Well, ..indeed it worked. Not very convenient though and it's a bug that's been around for a while (7 month!! according to some users).
Please fix this, cannot be too hard, can it?
What bothers me even more is a still low CPU usage of around 35% over all when exporting....
My system:
i7-5930K @ 4.40GHz (overclocked)
Gigabyte GTX 770 GB
SSD cache drive
HDD-RAID0 assets drive
Windows 8.1

Media Encoder CS6 Not using all CPU Cores or RAM

I'm currently exporting a 90 second video (using the Vimeo HD 1080p preset), and it is taking about 30 minutes. This is extremely strange as I have an i7-990x OC'ed @4.5, 12GB RAM, SSD, etc.
I looked at Performance tab in Windows Task Manager, and saw 4 threads were not being used at all, only 20-25% of the CPU was in use, and only 6GB out of the 9GB I specified was being used.
Why isn't Media Encoder making full use of my CPU and RAM?

I'm having the same problem. But even worst.
For the test, I take a 10 min .mov or mp4 file, simply modify the "scale", and hit the export.
a 10 min file is taking 4 hours to render.
This is on a:
2012 MacBookPro i7 2.3Ghz, 16 GB 1600 DDR3, SSD disk. - Mac OSX 10.7.5
and a:
2011 iMac i7 3.7Ghz, 16 GB 1333 Mhz, 7200 RPM HD - Mac OSX 10.7.5
The CPU stays at 90% idle the whole time.
I know this is an old thread, but maybe someone could give me a hand.

PPro not using all cpu cores evenly

Hey Guys!
I've been recently trying to optimize my laptop to get better performance.
I have a Lenovo Y550P -
i7 Q 720 1.60 GHz
8GB Ram
Nvidia GT240m video card (1gb ram)
64 bit windows 7
500 gb 7200 RPM HDD
I know this is not the ideal setup, but it is what I have.
I have a massive amount of GoPro footage to process, and was having issues shuttling at 1/4 resolution. I made some tweaks such as:
removed windows visual effects
enabled hard drive write buffering
disable CPU core parking (laptop thing)
various tweaks to the services.msc file
"enabled" my video card for cuda =)
This has greatly improved my shuttling for 2x and 4x. however when I watch the performance monitor I notice it uses CPU cores 4 & 7 significantly more than the other cores. CPU usage only reaches about 40% during shuttling, yet stutters.
Here is a screen capture of resource monitor on disks: I'm currently reading the footage from an external USB 3.0 drive (F), scratch disks are set to internal (C).
Here is a screen capture of CPU resources, notice how cpu core 4 (start from 0) has higher usage.
Is there something I can improve on my setup to make my system more efficient, or is all this just because of the HDD bottleneck? Any advice on improving my limited systems performance would be appreciated.
Thank you for your time!

Sorry, here are the images!

Firefox not using all CPU's

This may be a windows 8 issue, but I can't get my CPU over 20% usage. I am a big tab user, and the system is only slightly faster than my old 2 core system.
I had upgraded to a new windows 7 system, and it was zippy, but the hard drive crashed. I swapped it out for a windows 8 with touch screen when they didn't have a comparable win7 system.
I double checked the task manager details and the processor affinity says "all processes" (0-7) all nine checked.
I'm not sure if its firefox or the OS that is throttling it to 20% cpu usage.

Just found out, that drag and drop PPro Sequences into AME seems to be a work-around.Plus unchecking the "Import Sequences Natively" in AME.
Well, ..indeed it worked. Not very convenient though and it's a bug that's been around for a while (7 month!! according to some users).
Please fix this, cannot be too hard, can it?
What bothers me even more is a still low CPU usage of around 35% over all when exporting....
My system:
i7-5930K @ 4.40GHz (overclocked)
Gigabyte GTX 770 GB
SSD cache drive
HDD-RAID0 assets drive
Windows 8.1

AE CS5 not using all memory and cpu

I am using After Effects CS5, wondering why the rendering is not using my CPU and memory full. It`s using only 15 % of memory and sometimes up to 50 % of CPU. What can I do to make it use better my hardware.
The current rendering is chroma key using Keylight.
I understand it can`t use all the hardware, but why only 15 %, because everybody is talking that you need a lot of RAM for AE.
CPU: Intel Core i7 920 - overclocked to 3.4 GHz
MEMORY: 6 GB DDR3
GRAPHIC: nVidia GTX 285

Not all rendering operations will max out all RAM and all CPUs (processor cores). Some rendering operations are I/O intensive; some are memory-intensive; some are CPU-intensive. If, for example, I/O is the bottleneck, then you won't see either CPU or RAM usage maxed.
Also, the goal isn't to see that 100% of the CPU and 100% of of RAM is being used. The goal is faster rendering (and other operations). Sometimes greatest performance is achieved when there's "headroom" left over for other activity. See this page.
Are you using Render Multiple Frames Simultaneously multiprocessing? That is one feature that really benefits from having a lot of RAM. The 6GB of RAM that you have in your system is not enough to make effective use of that feature. See this page.
Here's a page that collects information about how to optimize for performance.

Premiere Pro CC not using all resources... 4k

I just put together a new workstation machine for editing 1D-C 4k files in Premiere Pro and After Effects.
Specs...
i7 3770 3.4
Gigabyte Z77 Mobo
32gb Corsair Vengance DDR3 1600 RAM
250gb Samsung SSD
4x 2TB Seagate 7200 HDDs in RAID 0 (Yes I know it isn't backed up, we have that part covered)
Nvidia Quadro K4000 (3gb vram)
Anyway, we transfered a project with all the media files to our RAID media drive.
It opened up very quickly and loaded all the media much faster then our old workstation.
Then I hit the spacebar (perview) and the problems started..
It won't play back smoothly at all,
AND it is only running the CPU at 10-20%, GPU 10-50%, ram at 25% and it is not really taxing the drives very hard either...
Why won't PP use all the resources at 100% like I have previously seen it do on other machines?
** The project we are trying to play is 2 layers of 4k .MOV footage in a 1080 timeline... with sharpening, Fast color corrector, and RGB curves.
** It also drops every fourth frame when playing back just one layer of 4k .mov footage in a 1080 timeline with NO Effects applied. (Much smoother, but still not using all resources)
What I am asking, is why would it be giving up so quickly? Before even taxing the resources very hard?

I too have a recent 1D-C project I'm editing. That 1D-C is something, yes? Most filmic images I've ever seen from a DSLR. But I digress.
I'm following a workflow closer to the one used by Philip Bloom and Shane Hurlbut. The Motion Jpeg files will not play well at all on your system. It's strictly a capture medium - not an editing one.
I converted all my 1D-C files to Prores 422 at 4K size using Mpeg Streamclip. Those files imported beautifully and edit well on my Retina Macbook Pro laptop. I usually set playback to 1/2 quality, ps.
I have had problems using CUDA, so I'm sticking to software mode. But I don't see any problem with being able to cut my film and finish on my computer.
Also - my sequence is a 4K sequence right in Premiere. I simply chose a clip and "made a sequence" from that. Why scale when I don't have to? I've exported to 1080p easily from the sequence.
If anyone finds this workflow less than ideal, I'm all ears. Thanks.

Firefox uses all CPU resources when loading pages with lots of images.

I just installed XP, and when I load pages with a ton of images, say, tumblr, Firefox uses ALL CPU time until it finishes loading.
But because of the slowdown, it takes forever to download all the images.
It's not related to my connection, I've got 15mbit downstream.
I have Win7 on a different partition, and I have never had this problem.
As far as I know, all my drivers and XP are up to date.
I could have an old driver lurking, should I be looking at something specific?
I've tried to find something on Google, but I've not found anything really helpful...

I haven't gotten around to installing antivirus (or anything else, for that matter).
If I watch in Task Manager, Firefox.exe goes to 100% as soon as I load the page.
And no, that guide didn't help much. I don't have any addons or plugins yet, this is a new install.
I got a huge slowdown a bit ago, it's because it was using almost 1.5GB of RAM o_o

MBP not using all memory while rendering video

Hey,
When I do rendering in Adobe Premiere Por CS6, my Mac is not using all the available RAM: 2773 MB used....5416 MB free
Memory Pages:
                              1658 MB active....1099 MB wired
                              5420 MB inactive....11.2 MB free
it also says that:       3 swap files at peak usage
                               256 MB total swap space (20 MB used)
350 GB free storage space( total 750 GB)
I have a MBP (OS x Lion) late 2011 with i7 2.8 GHz and 8 GB RAM
Adobe Premiere Pro is set to use 6.5 GB of RAM but not even while working in the programme it has ever used that much of memory.
During rendering, it is the only app running, except for Google Chrome.
If this info is not enough, just ask what do you need to know...
PLEASE HELP, rendering takes forever.
Thanks,
kund

You never said what model Mac you have. Since this is the MacBook Pro forum, I assume you have some version of the MBP. 390% CPU would indicate CPU-boundedness for a quad-core CPU without active hyperthreading, or a dual-core CPU with hyperthreading active.
Given the high CPU usage and the low swap usage, it seems unlikely that memory usage is the problem, but I'm not a Premiere Pro user, so I couldn't guess what it.
You might try posting your question in an Adobe forum for Premiere Pro.

Can not use all the tools in my drawing markups any ideas on getting them to work?

Can not use all the tools in my drawing markups any ideas on getting them to work?

Hi tonys60181,
Could you please let me know what version of Adobe Acrobat are you using.
What all drawing tools are you unable to access?
Is this issue specific to one PDF file or all?
What exactly happens when you try to use any drawing markup?
Please let me know.
Regards,
Anubha

SAP job not using all dialog processes that are available for parallel processing

He Experts,
The customer is running a job which is not using all the dialog processes that are available for parallel processing. It appears to use up the parallel processes (60) for the first 4-5 minutes of the job and then maxes out about 3-5 processes for the remainder of the job.
How do I analyze the job to find out the issue from a Basis perspective?
Thanks,
Zahra

Hi Daniel,
Thanks for replying!
I don't believe its a standard job.
I was thinking of starting a trace using ST05 before the job. What do you think?
Thanks,
Zahra

After upgrading ios6 my app color note lost all of my notes

Color not lost all of my notes. Any way to get it back?

Restore the device from the backup created prior to the update to put everything back the way it was prior to the update. This will not downgrade the iOS.

System not using all avail. mem.

Hi all, did a lot of forum searching and haven't seen this topic.
I'm using PPCS5(in production Premium) While rendering, the program is not using all available memory. before I go on here is the system I am using:
Win7pro
EVGA X58FTW mobo
I7 970
6x4gig Kingston hyperX 1600 RAM
Quadro fx4000
WD 140gig Raptor sys. drive
2x1TB RAID 0 (3gig SATA) data
2x2TB RAID 0 (6gig SATA) data
see image:
I have 21gigs allocated to the program.
Is the bottleneck the cache memory?
This is what I'm outputting:
Thanks for looking.

Bob Sackter wrote:
I am encoding H.264 640x360
Source is 1920x1080p60 HDV 8 sources, With a timecode window
bitrate set at 2.0 1 pass VBR
I'm making a multicam reference.
There is a little contradiction in the information here, HDV is 1440 x 1080 i60 or possible p30 I do not know of any camera that is 60p

Color not using all CPU

Similar Messages

Maybe you are looking for