Color (onscreen/print) issues after update to 10.4.9

I am on the hunt for any new information - I haven't found it yet. I am convinced that one printer profile has gone haywire after the OSX 10.4.9 update. I can no longer use it accurately to onscreen proof nor application manage print in Aperture. The other printer profiles seem to be working. Using PSE4 I get the same preview and print results - major yellow/orange colorcast. My other two printers are working ok.
I understand proofing may/will present a shift in lightness, contrast, etc. and you can create an Aperture version to make adjustments for that profile. But I am experiencing a major shift that is difficult to adjust in the overall image.
Has anyone experienced "all of a sudden" icc profile / onscreen proofing / printer issues after the update (FYI ColorSync was updated in that)? I have tried just about everything except un/reinstalling Aperture.

Did you find out anything about this? I'm having exactly the same problems with Aperture and 10.4.9. Onscreen proofing is completely useless for all profiles supplied by HP (I have a B9180 printer). It might of course be an issue with these particular profiles, but odd thing is that it's only the screen rendering that looks wrong (yellow or reddish cast) while the prints looks just great.

Similar Messages

Printing issue after update to 10.6.5 on Hp Printer 2500

Printer shows conncted but no job prints!
solution: reinstall 10.6.3 and it prints again
run Hp printer update and printer stops again?
can anybody help?

Maybe this thread will help?
http://discussions.apple.com/thread.jspa?threadID=2640270&tstart=50

Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

anyone had similar issue and or a fix?

issues after update
Download and install new drivers from the Epson site for your printer model.
Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

Syncing issues after updating to 10.3.1.55

After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something. I think the error even states do a restore to fix it. Last night that is what I did, clicked restore and then had it transfer all my items back. I'm glad I had just synced my phone prior to the update so the restore was really current.

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

Hi everyone
I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
I am seriously thinking to switch ISP or phone.
Anyone did experience same problem / found a solution?

Hi Raia.D,
Welcome to the Support Communities!
The first thing I would suggest is to restart your iPhone. Then tap the Settings app, and you should see Cellular listed on the main settings screen. You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
Here are some additional troubleshooting steps to try:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Judy

Color issues after update to 10.4.9

Has anyone discovered color printing (images) after the 10.4.9 update? ColorSync was updated as stated here: http://docs.info.apple.com/article.html?artnum=305214.
I personally swear that I have onscreen proofing go bad using Aperture with a particular HP printer (8750). The other printer profiles appear to be ok. I cant prove this, but hope to find other users with the same issue (if it exists).

Did you find out anything about this? I'm having exactly the same problems with Aperture and 10.4.9. Onscreen proofing is completely useless for all profiles supplied by HP (I have a B9180 printer). It might of course be an issue with these particular profiles, but odd thing is that it's only the screen rendering that looks wrong (yellow or reddish cast) while the prints looks just great.

Color Printing Problems after update dec28/07

Last night I installed the latest updates for PS CS3 on 2 machines and both machines have the exact same color issues while printing with two different Canon printers.
The Problem:
Since this last update all images I try in print from 16bit ProPhoto or AdobeRGB 16bit, converted from Canon RAW through ACR look sepia tone, there is virtually no color (images still look as they did before on my monitor). In order to get the color to print I must convert image profiles to 8 or 16 Bit sRGB. I have not changed any settings after the update and confirmed that the update made no changes to the printers set up. sRGB 8bit jpeg images print color as seen on the monitor.
BOTTOM LINE: I can no longer print ProPhoto or AdobeRGB color space on my 8 color Canon Printer

Thanks Jeff
Both computers are PCs, one on XP, one on Vista, and printers are Canon i9900 and Canon ip4000 both are printing exactly the same way. Swoped printers between PCs with same outcome. Only changes made to both PCs was the CS3 update.
Jeff, I thought the problem may stem from the ACR RAW conversion as regular sRGB jpegs print the color as seen on my monitor. I have also submitted this question to the general PS forum...
Thanks again for taking the time to reply..

HP Printer issue after installing Mountain Lion

Hi, a few days ago I posted the following question regarding a printer issue and so far I have not been able to fix the problem. Here's the original question and I will continue the explanation after this....
Hi, I am a fairly new iMac owner and I am really happy with my apple, however I have an issue with my printer and I kind a "blame" Montain Lion for it. I have been using this HP Laserjet P2015 dn printer for a long time, initially with Windows and now with iMac. The first year approximately there was no problem at all to print and the transition from Windows to Mac with the printer had no difficulties at all. It was connected wirelessly via router. After downloading Montain Lion I notice the printer intermittently lost connectivity. The only way to print was turn off and turn on and it will print fine until the next time. Now out of the blue it's doing the same thing so frequently I can't print a complete document at all. It starts, and finish without printing the entire document or not connect at all. I have tried everything, including a static IP address for the printer, connect the printer to the computer via USB, downloading all the printer updates from HP and nothing seems to work. Just now, I did it again (for 100 times so far), delete the printer, reinstall and it's doing the same thing. It connects fine (either via IP or USB) and it last connected only for a minute or two. That's it. It's a shame, because I like the printer. The printing quality is great and to add more pain, I recently got a new ink cartridge ($100.00) capable of printing 3000 pages. It has 70% of ink still. Any computer sabby person out there has any ideas for me? Like I said, I've done everything.... inluding,
1. Remove the printer
2. Update the drivers
3. Assign a static IP address to the printer
4. Connect via USB
5. Disconnect the printer for a while and restart the whole process again
6. Did a "cold start" to the printer
I don't know what to do, and I don't want to spend more $$$$$ on a new printer. Is Montain Lion to be blame for? Please advise me.
Any help will be greatly appreciated.
At this point I do have the printer connected only via USB, prints one page (perfectly) and then goes offline. Before installing Mountain Lion I did use the printer with my Mac for almost a year with no issues at all. I even downloaded Mountain Lion again thinking of any flaws during initial installation. I've done all the updates, drivers, uninstall, re install, repair disk permission, static ip address....you name it... I've done it all and nothing seems to work. What makes no sense to me is that prints so great only one page and then is gone.... I would be happy to know the printer is dead and go get a new one but in my mind if it prints ok one page it still works. I don't want to have a new printer and find out it does the same thing. I can't keep myself away from blaming Mountain Lion. IS THERE ANY WAY TO REMOVE MOUNTAIN LION WITHOUT THE RISK OF DAMAGING THE COMPUTER???? PERHAPS GOING BACK WILL PROVE ME MOUNTAIN LION IS THE CULPRIT. Just saying... I am totally frustrated. I guess the next step is to get a baseball bat and fix the printer once and for all.
Any help will be greatly appreciated.

Any fix for this? I have the same problem after upgrade. It's off by many seconds. Thank you.

Printing problems after updat maverick

After update to maverick mine hp deskjet 3070a ,cannot print wirelessprinting anymore.the AirPrint is not in the list and, bonjour printing is not in the list *** Well Before i update the printer was working allright with wireless connection. No problem what so ever. I can only choose USB printing. Can you please give me Some advice.

I have the same idential issue with a HP Laser Jet Printer P1100/P1102w... If you tick the netwrok printer sharing box on the USB connection the Bonjoour printers show up then almost immediateky dissapear? Only on a few occasions do they remain stable enough to click on and add, however it fails to support AirPrint and will not print over WiFi... it does not pick AirPrint as the driver on AutoSelect and even if I select the printer driver manually it still will not print over WiFi... USB is fine however. I have reset the printing system, I have done a WiFi card reset, I have done all the troubleshooting I can do but still there is an issue? Is there anything else I can do?
I will be getting HP support to remotely shoaddow my Mac in an attempt to get a successful installation however I suspect the issue will persist? All the Apple Updates are done and also the current drivers are installed. I suspect this is an Apple Bug that needs to be fixed asap? It is a brand new HP printer that is supposed to support AirPrint...Very frustrating Apple?

Various Issues After Update To Bootcamp 3.2 (MacBook Pro, WindowsXP)

Hi all,
i'm experiencing various issues after i updated to Bootcamp 3.2.
I first was running Bootcamp 3.0 (everything worked just fine, except some nv4_disp.dll bluescreens). I updated to Bootcamp 3.1 and then to Bootcamp 3.2.
Everything seemed to be fine firstly, but now i noticed various issues:
1. I can't access the Bootcamp control panel (crashes when i try to open it (applecontrolpanel.exe at Offset 0004703a)
2. Everything USB doesn't seem to work (except external USB drives), like USB printer does not print, camera attached via USB does not import photos)
When i check the Driver-Manager i'm seeing multiple USB hubs, root hubs and host conrollers (4 root hubs, 2 openHCD usb host controller, 2 usb hubs...). When i try to configure the USB port the printer is connected to i also get an error ("not supported").
3. When i try the extended display settings i'm getting an "NVIDIA display panel extension can't be displayed".
MacBook Pro 13inch, Windows XP MediaCenter Edition (SP3), NVIDIA GeForce 9400M.
Thanks: Lars

Answered my own question, but want to post how I did it in case other users have the same problem.
I am assuming this issue appeared because I live in Canada. When I installed the Bootcamp 3.2 update, for some reason it changed my regional language of my system to French (Canada) - Canadian Multilingual (Apple)
To change it back I went in Windows XP to Control Panel, Regional and Language Options. Languages tab. Under Text services and input languages clicked Details.
Under settings tab changed Default Input Language from French (Canada) - Canadian Multilingual (Apple) to English (Canada) - US. Click apply.
Wait...it was working, but in the time it took me to type this it suddenly reverted and Im back to weird character mappings inspite of the language setting being changed.

Lumia 1520 Battery Discharge Issue After Updating ...

After updating to Denim, my Nokia Lumia 1520 started to experience the following symptoms:
Phone charges to 100%, I disconnect and use an app like Instagram BETA, Internet Explorer, Lumia Camera, or any game--after no more than 5 minutes of use, the phone gives a "Critical Low Battery" alert and shuts down. If I try to restart phone immediately, it makes it to the AT&T splash screen or lockscreen and then same battery message appears and shuts down. If I wait 10-15 minutes after the shutdown to restart phone (without recharging) the phone will stay on, but battery level will report to be in the low 20s or 10s (whereas no more than 20 minutes ago, it was 100%).
When phone is at 100% battery: I take 2-5 photos or record mere seconds of video and I get the same "Critical Low Battery" alert. Upon restarting, some of the photos or video are nonexistent or corrupt files and battery level is reported at 2-5%.
However, if my phone is plugged in to charger, none of these "Critical Low Battery" alerts come up and I am able to use phone as usual. Considering that I cannot take a vacation and capture nature's beauty with an AC adapter always connected, this is a serious drawback.
Steps I've Taken:
Soft-reset
Full factory-reset
Moved all apps off microSD card (this improved situation maybe 5%)
Disabled almost all background app use in Battery Saver
Replaced microSD card when I thought this was a memory write/read issue
Installed "Battery" app to monitor battery use. After 750 data points were logged, my average battery life is reported at "16 minutes," which sounds about right.
My warranty should be expired since I purchased the phone December 2013, so I'm checking in here if anybody has had any luck with battery replacements or with a solution to this issue? At the same time, this issue arose strictly after updating to Denim and I've seen other users report this EXACT scenario. Is there any hope for Lumia 1520 users on this?
Other reported cases:
Battery Issue after Denim update: http://forums.windowscentral.com/nokia-lumia-1520/347112-battery-issue-after-denim-update.html
Battery critically low and shutdown: http://forums.windowscentral.com/nokia-lumia-1520/342343-battery-critically-low-shutdown.html

Hi albertico, TeJazz, and Samgh. Welcome to the Microsoft Mobile Community. We understand your situation and in response to this issue, we suggest that you perform the suggestions in the photo attached. If the issue persists, we recommend recovering your phone's software using the Windows Phone Recovery Tool. This link will work regardless of your location. If the same thing happens, it's best to take your phone to the nearest Care Point in your area for evaluation. Backup first to avoid data loss.
Attachments:
Battery drains fast.JPG ‏147 KB

Logic Remote connectivity issues after updating to iOS 8 (solved!)

Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

Thanks very much! This solved my connection problem.

Logic Remote issues after updating to iOS 8, problem solved!

Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

Note: Removing the CS (Controller Surface) plist is a part of the basic troubleshooting procedures for Logic Pro (and GB)
See section #8
Logic Pro X: Troubleshooting basics

Color (onscreen/print) issues after update to 10.4.9

Similar Messages

Maybe you are looking for