Colorize option

Many of the tools like Hue/Saturation have a checkbox for colorize?
1. why would you use one of these tools and not want the colorize option selected?
2. it seems that the tools have a color changing effect whether this checkbox is selected or not? What is it doing if it is not selected?
Thanks.

2. it seems that the tools have a color changing effect whether this checkbox is selected or not? What is it doing if it is not selected?
If I don’t understand something in Photoshop I sometimes create a test file and apply it (with various settings maybe) to evaluate what the changes are.
(Edit: Actually it should rather be »If I want to get a handle on something I don’t understand in Photoshop …« because with a program like Photoshop there is likely to be stuff I don’t understand, but don’t bother to investigate …)
Have you tried this yet?
Anyway:
If one uses the Colorize option on a Hue Saturation Layer the whole of the affected region is changed to the selected color (Hue).
If one does not check this option all colors are equally moved along the Hue-circle – so when red becomes blue, blue becomes green etc.

Similar Messages

Where is the Hue, Saturation, Lightness effect that has colorize option in CS3 Premiere?

Hi,
Please could you say where is the Hue, Saturation, Lightness effect that has colorize option in CS3 Premiere? I look under Color Correction in Effects and there is a "Color Balance (HLS)" but there is no colorize option. Thanks for your help.

Sometimes you ned to apply more than one effect.
Look at Fast Color Corrector.

How to use color picker or RGB values in the hue-saturation colorize adjustment

I have a monochromatic adornment that I want to match to the color of a logo. I am attempting to use the colorize option of a hue saturation adjustment layer to match color. But I cannot quite get the colors to match. I know the RGB values of the color, but how do these translate into the Hue/Sat/Lightness numbers of the adjustment dialog? I tried using the correlating H/S/B values fro9m the color picker but that did not work.
Any suggestions?

Thanks Zeno. Creating a layer with the color and using the blend mode worked fine. But as I stated in the original post, using the H/S/B (there is no HSL) values from the color picker does not work when you place them into the H/S/L values in the hue-adjustment layer with (or without) the colorize box checked. But your first suggestion worked like a charm. Thank you.

CS4: Black-and-White adjustment layer - no Saturation slider?

Hi. The modal dialogue for Black and White has the "Colorize" option and for that "Hue" and "Saturation" sliders.
But Black and White as an adjustment layer in the adjustments palette does NOT offer the Saturation slider. At least not in my CS4 Extended on Win XP. There is the targeted adjustment tool (TAT), but it changes color, not saturation.
Can that be or am i missing something?
Thanks!

The interesting thing is that there is an colorization saturation adjustment slider in the imag-adjustment-black and white dialog as shown below.
The lack of that slider in the adjustment panel is a bug in CS4. It was present in CS3.
Adobe should fix that because it is really usefull because it's non-destructive and can be set as a preference.
The cumbersome workaround is to add a hue saturation adjustment layer.

Changing hue/saturation

I make a selection and choose Image > Adjustments > Hue/Saturation and it seems the colors are completely off when I have the colorize option selected.
Should this checkbox not be selected when changing colors this way? I know that this could also be done with an adjustment layer, I am just curious why the colors seem off.
Thanks.

If your goal is to keep a full range of colors, but skew them on the spectrum, you'll want to make sure Colorize is turned off.
Colorize works by taking the average value (pure grey) and setting it to be equivalent to your new color (in the Hue/Saturation sliders). This then gets tinted and shaded (using the whites and blacks in your document). Essentially, Colorize fakes a dutotone image (the only colors will be the one you select + black).

Color of highlighted pages in the Pages Pallet?

A new option for menu items is to change their highlighted color.
When you highlight "select" pages in the Pages Pallet... it is a light blue which is hard for me to see.
How do I find the right menu in in the menu colorization options to change this?
Thank you,

If you're on a Macintosh, the highlight color is NOT set in InDesign. It's in System Preferences > General > Highlight Color.

PSE 10 - distorted colors

I am trying to open my .nef raw images using PSE 10, and whenever I open an image, it is shown with a weird yellowish/brownish hue, that makes it impossible to work on. When I open the same image using other programs, the colors are normal. I have used PSE before and never had this problem, but this is a new laptop (ASUS). Any help will be greatly appreciated how to make it open in the original colors...

There are many ways to do that. One of the most straightforward is to use a Hue/Saturation adjustment layer:
Select the area you want to apply the new colour to:
Create a Hue/Saturation layer. The layer will automatically be masked to your selection. Select the "Colorize" option and change the settings of the H/S layer to suit:
The final result:
Ken

Join line to define object

Hi,
i'm trying to create a rope under Illustrator CS5.
for that i created the usual "S" line and multiply it in order to create the rope effect.
now i would like to join 2 "S" line together to create a new shape in which i can fill with a color. In that way i will be able to create an alternated colored rope.
however i have some problem to join 2 "S" line in order to create the shape to fill.
Do you have an idea on the best method to do that ?
thx.

what Jetalmage wrote set the filling color at the beginning and you can't change it later on...you have to recreate a new rope from the coloring step...
Can't understand what you're saying here. For clarity: When you create a Brush, the dialog provides a Colorization option. Using that feature allows you to change the color of a Brush Effect at the object level any time you want. So you can use one Brush to create ropes (wires, whatever) of any color. For example, note that the artwork of the Brushes shown below are all built in grayscale. The color of the individual wire insulations is applied at the object level, as you would for any ordinary stroke. Thus, the two Brushes that are applied to path 4 can be used to make a wire of any maincolor/tracecolor combination. The colorization options are described in online Help, and are even illustrated in the Brush Options dialog itself.
So no, you do not have to create a separate Brush for each color rope (if that's what you are saying).
Regarding joining paths: Join now works without having to "direct select" endpoints with the white pointer. You can just select the paths you want to join, and the Join command will join them at their nearest endpoints. You can override this by selecting the endpoints you want to join when they are not the nearest pair.
JET

Any way to re-colorize the UI?

I have been using this gray creative suite UI for several years and I am still frequently misdirecting keystrokes or having to do extra clicks to make sure the keyboard focus is where I think it is. Are there any add-ons which will re-colorize the UI of the active window or pane and leave the inactive stuff gray? Better yet, Adobe, give me back the option to use the operating system color scheme.

Are there any add-ons which will re-colorize the UI of the active window or pane and leave the inactive stuff gray?
There can be no such tools because that is all hard-coded.
Better yet, Adobe, give me back the option to use the operating system color scheme.
Won't happen.
Mylenium

[Solved]Compiling audit with staticlibs options

Hi everyone, I wanted e4rat to boost my boot time on my laptop, but recent updates requires me to recompile audit with static libs:
Index» Newbie Corner» [Solved] e4rat-preload cannot work
I made a copy of the audit PKGBUILD from the repositories and altered the options as indicated
depends=(krb5 libcap-ng)
makedepends=(libldap swig linux-headers python2)
license=(GPL)
options=(emptydirs staticlibs)
but when I run makepkg, the compile message tells me that:
libtool: link: ranlib .libs/libauparse.a
/usr/bin/sed: can't read Packages/audit/src/audit-2.3.2/lib/libaudit.la: No such file or directory
libtool: link: `Packages/audit/src/audit-2.3.2/lib/libaudit.la' is not a valid libtool archive
Makefile:895: recipe for target 'libauparse.la' failed
==> ERROR: A failure occurred in build().
Aborting...
but when I nagivate to the audit-2.3.2/lib/ directory, libaudit.la exists there. Am I missing out on something?
Last edited by enochnotsocool (2013-12-15 01:56:36)

Here is my entire /etc/makepkg.conf is it helps at all:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
#CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
#CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=native -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
#PKGEXT='.pkg.tar.xz'
PKGEXT='.tar'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Those were the options I used to build. I installed the depends and then built in my home directory after making the change to the PKGBUILD (adding staticlibs to options array) as you specified. My cpu is i7 sandybridge. Aside from that I'm not sure how much help I can be.

My Illustrator file is greyscale and I can't colorize it

I opened a pdf, and want to colorize / add color elements. It stubbornly remains greyscale. Changing the 'color mode' to RGB/CMYK makes no difference but that's the only document color option I've been able to find.
THANX!

Well, it's pixel data and needs to be processed in a pixel-centric program like Photoshop. PDFs are just containers for a variety of data, which can incl,ude pixels, vector and editable text as well as a lot of otehr stuff.
Mylenium

[SOLVED] gcc: error: unrecognized command line option '-V'

Hi.. this is my first post but I always read the forum to solve my problem! ;) thank you to all!!!! sorry for my bad english in advanced...
This is my problem:
I have Archlinux x86_64 with Gnome (last version).
I try to install the driver for my printer epson sx218 but when I compile the bash show:
checking for gcc... gcc
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
now, I see the config.log file and I see the line:
gcc: error: unrecognized command line option '-V'
my makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl, -O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j2"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs libtool staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
this is my full config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by epson-inkjet-printer-filter configure 1.0.0, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure LDFLAGS=-Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed --prefix=/opt/epson-inkjet-printer-workforce-320-sx218
## Platform. ##
hostname = localhost
uname -m = x86_64
uname -r = 3.9.3-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Sun May 19 22:50:29 CEST 2013
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/core_perl
## Core tests. ##
configure:1989: checking for a BSD-compatible install
configure:2045: result: /usr/bin/install -c
configure:2056: checking whether build environment is sane
configure:2099: result: yes
configure:2127: checking for a thread-safe mkdir -p
configure:2166: result: /usr/bin/mkdir -p
configure:2179: checking for gawk
configure:2195: found /usr/bin/gawk
configure:2206: result: gawk
configure:2217: checking whether make sets $(MAKE)
configure:2238: result: yes
configure:2480: checking for gcc
configure:2496: found /usr/bin/gcc
configure:2507: result: gcc
configure:2745: checking for C compiler version
configure:2752: gcc --version >&5
gcc (GCC) 4.8.0 20130502 (prerelease)
Copyright (C) 2013 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2755: $? = 0
configure:2762: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.8.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.8-20130502/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-gnu-unique-object --enable-linker-build-id --enable-cloog-backend=isl --disable-cloog-version-check --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --with-linker-hash-style=gnu --disable-install-libiberty --disable-multilib --disable-libssp --disable-werror --enable-checking=release
Thread model: posix
gcc version 4.8.0 20130502 (prerelease) (GCC)
configure:2765: $? = 0
configure:2772: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:2775: $? = 1
configure:2798: checking for C compiler default output file name
configure:2825: gcc -march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed conftest.c >&5
cc1: error: argument to '-O' should be a non-negative integer, 'g', 's' or 'fast'
configure:2828: $? = 1
configure:2866: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "epson-inkjet-printer-filter"
| #define PACKAGE_TARNAME "epson-inkjet-printer-filter"
| #define PACKAGE_VERSION "1.0.0"
| #define PACKAGE_STRING "epson-inkjet-printer-filter 1.0.0"
| #define PACKAGE_BUGREPORT "epson@localdomain"
| #define PACKAGE "epson-inkjet-printer-filter"
| #define VERSION "1.0.0"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2873: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXXFLAGS_value='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed'
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
## Output variables. ##
ACLOCAL='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run aclocal-1.10'
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run tar'
AR=''
AUTOCONF='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run autoconf'
AUTOHEADER='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run autoheader'
AUTOMAKE='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run automake-1.10'
AWK='gawk'
CC='gcc'
CCDEPMODE=''
CFLAGS='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
CORE_LIBRARY_PATH=''
CORE_RESOURCE_PATH=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CUPS_IMAGE_LIBS=''
CUPS_LIBS=''
CUPS_SERVER_DIR=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
CYGPATH_W='echo'
DEFS=''
DEPDIR=''
DL_LIBS=''
DSYMUTIL=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
F77=''
FFLAGS=''
GREP=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LDFLAGS='-Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LN_S=''
LTLIBOBJS=''
MAKEINFO='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run makeinfo'
NMEDIT=''
OBJEXT=''
PACKAGE='epson-inkjet-printer-filter'
PACKAGE_BUGREPORT='epson@localdomain'
PACKAGE_NAME='epson-inkjet-printer-filter'
PACKAGE_STRING='epson-inkjet-printer-filter 1.0.0'
PACKAGE_TARNAME='epson-inkjet-printer-filter'
PACKAGE_VERSION='1.0.0'
PATH_SEPARATOR=':'
RANLIB=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STDCPP_LIBS=''
STRIP=''
VERSION='1.0.0'
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_F77=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include=''
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='$(SHELL) /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='/usr/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/opt/epson-inkjet-printer-workforce-320-sx218'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
#define PACKAGE_NAME "epson-inkjet-printer-filter"
#define PACKAGE_TARNAME "epson-inkjet-printer-filter"
#define PACKAGE_VERSION "1.0.0"
#define PACKAGE_STRING "epson-inkjet-printer-filter 1.0.0"
#define PACKAGE_BUGREPORT "epson@localdomain"
#define PACKAGE "epson-inkjet-printer-filter"
#define VERSION "1.0.0"
configure: exit 77
any idea to solve? I searched around but can not find anything.. :'(
Last edited by liberato83 (2013-05-24 13:25:18)

Are you using AUR https://aur.archlinux.org/packages/epso … 320-sx218/ ?
I updated the PKGBUILD to remove the line that says 'gcc -V >&5' from the configure file
libtoolize
sed -i 's/gcc -V >&5//' configure
chmod +x configure
but it still doesn't build:
==> Starting build()...
libtoolize: putting auxiliary files in `.'.
libtoolize: linking file `./ltmain.sh'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for dlopen in -ldl... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for memset... yes
checking for strdup... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/raster/Makefile
config.status: creating src/raster/blendSource/Makefile
config.status: creating src/memory/Makefile
config.status: creating src/pagemanager/Makefile
config.status: creating src/filteropt/Makefile
config.status: creating config.h
config.status: executing depfiles commands
cd . && /bin/sh /home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run automake-1.10 --gnu
/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing: line 54: automake-1.10: command not found
WARNING: `automake-1.10' is missing on your system. You should only need it if
you modified `Makefile.am', `acinclude.m4' or `configure.ac'.
You might want to install the `Automake' and `Perl' packages.
Grab them from any GNU archive site.
cd . && /bin/sh ./config.status Makefile
config.status: creating Makefile
cd . && /bin/sh /home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run autoheader
rm -f stamp-h1
touch config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
make all-recursive
make[1]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0'
Making all in src
make[2]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
cd .. && /bin/sh ./config.status src/Makefile depfiles
config.status: creating src/Makefile
config.status: executing depfiles commands
make[2]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
make[2]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
Making all in memory
make[3]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
cd ../.. && /bin/sh ./config.status src/memory/Makefile depfiles
config.status: creating src/memory/Makefile
config.status: executing depfiles commands
make[3]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
make[3]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
/bin/sh ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../ -D_FORTIFY_SOURCE=2 -fsigned-char -O2 -MT memory.lo -MD -MP -MF .deps/memory.Tpo -c -o memory.lo memory.c
../../libtool: line 482: CDPATH: command not found
libtool: Version mismatch error. This is libtool 2.4.2, but the
libtool: definition of this LT_INIT comes from an older release.
libtool: You should recreate aclocal.m4 with macros from libtool 2.4.2
libtool: and run autoconf again.
make[3]: *** [memory.lo] Error 63
make[3]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...

[SOLVED] Colorize text that has already been printed

I'm making a small script for personal use, whose purpose is to output the state of my cooling devices in a nice way. For now, this is what I have, and, although it may be a bit dirty, it works:
( echo 'n type max cur' ; for P in /sys/class/thermal/cooling_device* ; do echo -n "$P " | tr -d '/sys/class/thermal/cooling_device' ; cat "$P"/{'type','max_state','cur_state'} | tr '\n' ' ' ; echo ; done) | column -t
Its output, in my machine, is the following:
n type max cur
0 Processor 10 0
1 Processor 3 0
2 Fan 1 0
3 Fan 1 0
4 Fan 1 1
5 Fan 1 1
I would like to colorize the output, but using either tput or color escape codes confuses column. Looking for a way to solve this in column has not succeeded; it seems it doesn't have any option to strip escape codes, or to ignore them. So, what can I do? I've thought about modifying the already-printed text, but that doesn't seem to be a very 'elegant' solution (I can't imagine how to do it, either).
Any ideas would be greatly appreciated. Good readings are also welcomed.
Thanks in advance,
Kalrish
Last edited by Kalrish (2013-06-09 12:24:07)

Try using printf instead of column.
#!/bin/bash
black='\e[0;30m'
red='\e[0;31m'
for d in /sys/class/thermal/cooling_device*; do
cd "$d"
x=(${d: -1:1} $(cat type max_state cur_state))
printf "${black}%2d %-10s ${red}%2d${black} %2d\n" ${x[@]}
done
Last edited by rockin turtle (2013-06-09 09:05:13)

Allowing option to color the buttons

as a sidethought, id love to be able to colorize items in
configurator, as i have over 70 actions and commands added to it,
all of which i use on photos. colorizing would help differentiate
them into groups better. since adobe allows it for actions, and
layers, and menu items, then certainly adding it to configurator as
well would make sense and is viable. thanks
gg

I concur.
(Took me a while to notice this forum, but I guess
here’s the right place to bring stuff like that up.)
Other than color-coding the buttons I guess the option to
position an image »under« the buttons without that image
affecting the Auto Layout might be helpful.

Which package colorizes the output of dmesg

I have colored output of dmesg on my desktop just by typing "dmesg" but it is not colored on my laptop. Which package is doing that?

Check the output of 'type dmesg' and 'type -p dmesg' on the computer that has colored output.
man dmesg wrote: -L, --color[=when]
Colorize important messages (enabled by default). The optional argument when can be auto, never
or always. If the when argument is omitted, it defaults to auto.
dmesg is provided by util-linux package. Are both using the same version?
Edit: Tooo laaate,
I think it's a recent change, as I haven't changed anything on my system an now just typing 'dmesg' gives me colored output.
util-linux 2.24.2-1 is just black'n'white.
Last edited by karol (2014-08-09 09:40:48)

Colorize option

Similar Messages

Maybe you are looking for