Columns in tablecontrol getting wider with different gui patchlevel

Hi,
I'm using a tablecontrol in a dynpro that shows exactly 31 columns on the screen, if I'm using SAP GUI 6.20 Patchlevel 44. If I use SAP GUI Patchlevel 66 for this application the columns are wider, so that not all 31 columns can be seen and the scrollbar has to be used.
Does anybody face the same problem and has a solution?
Best Regards
Peter

Hello
I managed to sove my problem.
Thanks
Paulo

Similar Messages

Why do I get two(2) different GUI displays. One with Mcafee advisor the other not?

Each time I open firefox, I never know which Gui page will appear. One has the mcafee site advisor at the top and bottom right. The other which I have now, has not site advisor displayed??? Am I getting a phoney page display. I have windows XP. Before the update to release 8, I didn't have this problem.

the CMYK values for the blue logo are 79, 56, 2, 0 and when I click on the RGB tab in InDesign or Illustrator, these programs tell me that the RGB equivalent is 69, 112, 179.
69|112|179 is the conversion you'll get using the default North American General Purpose Color Settings—or US Web Coated SWOP v2 converted to sRGB. As Willi implies there are many flavors of CMYK and RGB so different sources and destinations, as well as the conversion intent, will produce different results.
So "branding" color this way doesn't really work because 79|56|2|0 CMYK will look very different on newsprint than it will on a GRAcol profiled press with glossy paper, and 69|112|179 RGB will look very different in a CC app with a ProPhoto RGB assignment then it will look in a web browser with no profile assigned.
The best you can do is qualify the values—79|56|2|0 US Web Coated (SWOP) v2 CMYK = 69|112|179 sRGB IEC6196-2.1 RGB

Contacts get stored with different names

Hi,
I have had this problem for a while now, i even got a new Q10 and still problem exists. whenever i store a new contact with a new name it gets stored but the display name is something totally different it will choose one of my existing contacts first name and last name and will store the new contact as such.
yet when i search for my new contact with the given name i stored it with it finds it and yet displays the made up name it did.
for example
I already have contacts
John Smith,
Paul Adam,
Anthony Connery
and I want to save a new contact of Jennifer tyler.
the Q10 after pressing save with give me her name to be something like Paul Adam.
when searching for jenn
it will give me all the jennifers including paul adam
when searching for paul adam it will give me 2 contacts and one of them with jennifer tyler's contact details.
I CANT KEEP UP and i stopped storing numbers it is very annoying and i cant remember who is who
PLEASE HELP

here is a video to demostrate
http://www.youtube.com/watch?v=SweXyd3UGF8
and it happens to any number saved and ten it saves it to any name on my contacts

How to run get-gporeport with different credential?

Hello to all . I need to export all domains' GPO to a HTML file so I use get-gporeport command. I'm importing the right module (Import-Module GroupPolicy) but I'm not figuring out a way to run the PoSH script with an admin username and password
inside it so I don't need to be logged on while execution is running. I tried PSCredential object but I discovered that I can not run it as a parameter with get-gporeport command. I don't want to create a separate PoSH file that creates the PSCredential object
and after it calls my get-gporeport PoSH file to run it. Any ideas?
Regards, EEOC.

Yes - you need to run PowerShell as an administrator. You cannot do it inside of a script.
Start by leaaringhow PowerSHell and GP work. THe issues you are fighting with are basic Windows issues and have nothing to do with scripting.
Just choose to run PowerShell as an Admin and all will be well.
¯\_(ツ)_/¯

Matchcode problem with different GUI versions

We have upgraded most users to SAP GUI for Windows 640 Final Release. After this upgrade we have encountered an error in the matchcode lookups that the last character in most fields is being dropped so that when the lookup is performed it has an incomplete field for inquiry. Example:; in Sales Office we put in SO20, but when it uses this it drops the last character and performs the lookup with SO2 only.
However, SAP Frontend for Windows 620 Final release, the GUI prior to updating machines does not have the matchcode problem and works correctly.
I hope I have explained this adequately, any help is appreciated.

Hi,
I have this problem during the upgrade, I could not exactly figure it out what will be problem, but i upgrade my SAPGui frontend to 7.10 patch level 3, after that the problem found solved.
SAPGui 7.10 have backward compatiability, so it will work fine with 6.40 version
a®

Flatten/Assemble XDPs with Different orientations

I was able to flatten XDPs into a single PDF successfully using the invokeDDX.
The issue that I am facing now is while merging 4 forms together, if the 2nd or 3rd form happens to be in Landscape orientation, all rest of the forms also convert to the Landscape orientation. Also, when I try printing it, the Printer says the Printer Size did not match Paper type or something of that sort. Following was my DDX:
<DDX xmlns="http://ns.adobe.com/DDX/1.0/">
<XDP result="MyXDPResult">
    <XDP source="sourceXDP1"/>
    <XDP source="sourceXDP2"/>
    <XDP source="sourceXDP3"/>
    <XDP source="sourceXDP4"/>
</XDP>
<?ddx-source-hint name="sourceXDP1"?>
<?ddx-source-hint name="sourceXDP2"?>
<?ddx-source-hint name="sourceXDP3"?>
</DDX>
How do I get forms with different orientations to assemble and print? Would appreciate any help in this regard.
Thanks,
Saurabh

dreaming of weaving wrote:
> Allow Tool Recording ( You used no brush type tool to be recorded and this option is only useful if all document processes are the same size and resolution. This feature is hardly ever useful. It was poorly designed and implemented by Adobe. Their Plug-in ScriptListener even disables this feature if you install the plug-in )
> Create new Set
>Create new Action
> Click record
> add vertical "© name" to a new layer in PS file (if you are using the text tool here and want to process different size image you have a problem here)
> position it
> Layer > Flatten Image, (no need to flatten you can save a layered or flat file by choosing the proper file type.)
> File, Save, Close image. (no need to save or close if you are going to use the image processor to batch process images. The Image processor will open the files run your action a save the file types you set up. When all the file types have been save for a image. The Image processor will close the image and move on to the next image and repeat the process till all image files have been processed.)
> Stop recording
It seems you new to "Actions" . You may fine my crafting actions package useful. It even contains a sample watermarking action that can watermark any size document with watermarks. The Action show three methods. Custom Text Layer, Shape layer and Custom Loge Layer.
Crafting Actions Package UPDATED May 2, 2014 Updates some text and added StampExif Action and Script.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
More then a dozen Scripts for use in actions
Example
Download

Not able to color different rows with different colors in a column of table

Hi,
I am trying to to display different rows with different colors in a column of the table based on some decode condition.
I have gone through the following threads :
Can we colour the rows in the column of a table
Changing Color of a value in a column
This is what i have done :
1.Added the following code to custom.xss(changed the name to Custom.xss as suggested in one of the above threads) --- in path ---- jdev\myhtml\OA_HTML\cabo\styles
<style selector=".1">
<includeStyle name="DefaultFontFamily"/>
<property name="font-size">11pt</property>
<property name="font-weight">Bolder</property>
<property name="color">#008000</property>
<property name="text-indent">3px</property>
</style>
<style selector=".2">
<includeStyle name="DefaultFontFamily"/>
<property name="font-size">11pt</property>
<property name="font-weight">Bolder</property>
<property name="color">#FFFF00</property>
<property name="text-indent">3px</property>
</style>
2. Sql query of the VO is :
select comments,role ,decode(role,'REQUESTER','1','2') Colorattr from xxat_sars_action_history where request_id = :1 and event_name = :2 and action_code <> 'PENDING'
order by sequence_num desc
3. Coded the following in the process request of the controller:
OATableBean table = (OATableBean)webBean.findIndexedChildRecursive("CommentsTB");
OAMessageStyledTextBean roleBN = (OAMessageStyledTextBean)webBean.findIndexedChildRecursive("role");
OADataBoundValueViewObject cssjob = new OADataBoundValueViewObject(roleBN,"Colorattr");
roleBN.setAttributeValue(oracle.cabo.ui.UIConstants.STYLE_CLASS_ATTR, cssjob);
where 1 and 2 form the colors ( i have even tried with 'Red' and 'Yellow'...as it was not working replaced with 1 and 2)
4.The query returns data fine with corresponding 1 and 2 values.
But different colors are not getting reflecting on to the UI.
I am testing this on my local jdev.
Please do let me know if i am missing something.
Thanks ,
Sushma.

Any Clues please.....
Thanks,
Sushma.

How to generate a second csv file with different report columns selected?

Hi. Everybody:
How to generate a second csv file with different report columns selected?
The first csv file is easy (report attributes -> report export -> enable CSV output Yes). However, our users demand 2 csv files with different report columns selected to meet their different needs.
(The users don't want to have one csv file with all report columns included. They just want to get whatever they need directly, no extra columns)
Thank you for any help!
MZ

Hello,
I'm doing it usually. Typically example would be in the report only the column "FIRST_NAME" and "LAST_NAME" displayed whereas
in the csv exported with the UTL_FILE the complete address (street, housenumber, additions, zip, town, state ... ) is written, these things are needed e.g. the form letters.
You do not need another page, just an additional button named e.g. "export_to_csv" on your report page.
The csv export itself is handled from a plsql procedure "stored procedure" ( I like to have business logic outside of apex) which is invoked by pressing the button "export_to_csv". Of course the stored procedure can handle also parameters
An example code would be something like
PROCEDURE srn_brief_mitglieder (
     p_start_mg_nr IN NUMBER,
     p_ende_mg_nr IN NUMBER
AS
export_file          UTL_FILE.FILE_TYPE;
l_line               VARCHAR2(20000);
l_lfd               NUMBER;
l_dateiname          VARCHAR2(100);
l_datum               VARCHAR2(20);
l_hilfe               VARCHAR2(20);
CURSOR c1 IS
SELECT
MG_NR
,TO_CHAR(MG_BEITRITT,'dd.mm.yyyy') AS MG_BEITRITT ,TO_CHAR(MG_AUFNAHME,'dd.mm.yyyy') AS MG_AUFNAHME
,MG_ANREDE ,MG_TITEL ,MG_NACHNAME ,MG_VORNAME
,MG_STRASSE ,MG_HNR ,MG_ZUSATZ ,MG_PLZ ,MG_ORT
FROM MITGLIEDER
WHERE MG_NR >= p_start_mg_nr
AND MG_NR <= p_ende_mg_nr
--WHERE ROWNUM < 10
ORDER BY MG_NR;
BEGIN
SELECT TO_CHAR(SYSDATE, 'yyyy_mm_dd' ) INTO l_datum FROM DUAL;
SELECT TO_CHAR(SYSDATE, 'hh24miss' ) INTO l_hilfe FROM DUAL;
l_datum := l_datum||'_'||l_hilfe;
--DBMS_OUTPUT.PUT_LINE ( l_datum);
l_dateiname := 'SRNBRIEF_MITGLIEDER_'||l_datum||'.CSV';
--DBMS_OUTPUT.PUT_LINE ( l_dateiname);
export_file := UTL_FILE.FOPEN('EXPORTDIR', l_dateiname, 'W');
l_line := '';
--HEADER
l_line := '"NR"|"BEITRITT"|"AUFNAHME"|"ANREDE"|"TITEL"|"NACHNAME"|"VORNAME"';
l_line := l_line||'|"STRASSE"|"HNR"|"ZUSATZ"|"PLZ"|"ORT"';
     UTL_FILE.PUT_LINE(export_file, l_line);
FOR rec IN c1
LOOP
     l_line := '"'||rec.MG_NR||'"';
     l_line := l_line||'|"'||rec.MG_BEITRITT||'"|"' ||rec.MG_AUFNAHME||'"';
     l_line := l_line||'|"'||rec.MG_ANREDE||'"|"'||rec.MG_TITEL||'"|"'||rec.MG_NACHNAME||'"|"'||rec.MG_VORNAME||'"';
     l_line := l_line||'|"'||rec.MG_STRASSE||'"|"'||rec.MG_HNR||'"|"'||rec.MG_ZUSATZ||'"|"'||rec.MG_PLZ||'"|"'||rec.MG_ORT||'"';
--     DBMS_OUTPUT.PUT_LINE (l_line);
-- in datei schreiben
     UTL_FILE.PUT_LINE(export_file, l_line);
END LOOP;
UTL_FILE.FCLOSE(export_file);
END srn_brief_mitglieder;Edited by: wucis on Nov 6, 2011 9:09 AM

Design a single template for multiple reports with different column order

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks in advance.

-As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
-I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
For the customer that want the same ordering of columns you can put those customers under one condition.
    for Example...
          if(?Client in ['clientA','clientA']) then
                    <TableName>.<Field>......
-What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
Regards,
Amrita
Edited by: Amrita Singh on May 21, 2009 7:54 AM

How to color single column cells with different colors in classic report based different conditions

Hi ,
Am working on Oracle Apex 4.2 version. Am trying to generate a classic report with different cell colors based on the conditions.
I tried the solution provided in the below link.
https://forums.oracle.com/message/9518723#9518723.
I tried the same query given in that link.
   SELECT e.*,
CASE
    WHEN sal < 1000
    THEN 'red'
    WHEN sal BETWEEN 1000 AND 2000
    THEN 'yellow'
    WHEN sal > 2000
    THEN 'green'
END the_color
FROM emp e
And, I hidded the column 'the_color' in Report Attributes,
          the Column Template1 has the code , <td #ALIGNMENT# headers="#COLUMN_HEADER_NAME#">#COLUMN_VALUE#</td>.
After this, what are the steps did I miss here. Because am not getting the report which I need.
Kindly do provide solution.
Thanks,
yashu.

SAL column values should visible with different color based on the conditions. Same way i did in my report it was working for me. Please refer the below links for more information,
https://forums.oracle.com/thread/1047891
http://dbswh.webhop.net/htmldb/f?p=BLOG:READ:0::::ARTICLE:351800346145832
Thanks
Lakshmi

Column with dropdown with different values in each cell

Hello,
I have a Table and one of the columns contains a dropdown list (dropdownbykey). My problem is that the list of values for each drop down element is different because it depends on the value in the rest of the row cells. Obviously I need to calculate the values dynamically at runtime.
I have created a context node and linked it to the table columns, one of the attributes in the node is linked to the 'selectedKey' property of the dropdown. Then in my code I try to give the list of values to this attribute using the method set_attribute_value_set from the if_wd_context_node_info interface. The process it's explained in the DEMO_UIEL_STD_SELECTION component.
But I only get the same values for each row.
I would like to know if it's possible to have dropdowns with different values in the same column of a Table, and if so any indication of how to do that.
Best regards,

Hello Javier,
unfortunately you cannot use dropdown by key if you want to have different dropdowns per line of your table.
Instead you will need to use dropdown by index, and bind your dropdown to a subnode of the table element (ensure that this is a non-singleton node).
To make life easier for yourself, I would also have an attribute in your main structure that holds the selected value of the dropdown by index - update this value on any "onSelect" action of the dropdown by index.
e.g. for a table that holds addresses:
Context Node Address:
attribute street
attribute city
attribute country
attribute region
subnode regionlist
...attribute regionkey
...attribute region_text
table - bound to node address
input field bound to street
input field bound to city
dropdown by key bound to country (onSelect event populates subnode regionlist)
dropdown by index bound to subnode regionlist, text bound to region text, (onSelect event populates address element attribute region with key field of selected element).
I hope this helps,
Chris

Duplicate qty with Different Price after discount column in Inventory Posit

Hi,
I am getting Inventory duplicate qty with Different Price after discount column in Inventory Positing List Reports When I make A/R credit memo thru DI API.
With regards,
Venki .A

hi
you can just see the above given data there is a filed total_qty there are two rows showing 0 why it happens i dont understand because i wrote same as for others. all were showng what my input but when the prod_id repeats then it was not taken the total_qty it wll show me 0
Please Guide
Thanks And Regards
Vikas Snghal

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1.

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1. I am not sure how to do it. SOmeone please help me out.

Hi ,
In your write back XML try the below query insert
INSERT INTO TABLE_XYZ (attribute1) values (SELECT CASE WHEN @{C1}=’Yes’ then 1 when @{C1}=’No’ then 0 else null end from dual)
Regards
Rajagopal

BO xi 3.1 u2013 schedule a template for multiple reports with different column

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks!

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

HT2905 I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

In iTunes(on a Mac or PC) just tap on 'Albums' rather than 'Artists' and you'll see them all together.
You may find that there are songs mislabelled. In which case right tap on the Album or Artist and tap 'Get Info', then change to the correct name and the songs will join the rest of the songs for that Artist or Album.
Then resync with your iPhone and all will be well.

Columns in tablecontrol getting wider with different gui patchlevel

Similar Messages

Maybe you are looking for